Bissell ProHeat Pet, How To Fix Loss Of Suction/Spray🤔

[@cakerbaker9965]

My sincerest Thank you, Sir My machine has been sitting for months bc I knew I had to call Bissell to be walked through what to do like a 5 yr old, and I was dreading it You showed me where the belt is, and I found mine to be off…not even broken, just off. The quickest fix ever! Can’t believe it! Thank you again!!

[@VacMaster1991]

No problem I am so glad you liked this video. I may pin your comment

[@AE-xx3st]

Same here. I'm about to check my cleaner out

[@stephenbarr7165]

My spinner was clogged. Thanks for showing me there was a filter under it! Good spray flow now and I didn't even have to take it apart!

[@VacMaster1991]

Glad I could help

[@alisonhollingsworth1314]

This is hands down the best and most low drama trouble shooting tutorial ever! In two minutes you helped me locate three problems!

[@VacMaster1991]

Thanks so much

[@bingusbang]

Dude my machine hasn’t worked for a year and you just helped me fix it! Thank you!

[@VacMaster1991]

Your so very welcome

[@lavanbautista7288]

Thanks! This video was very informative on how to take care of and clean my machine. But then my wife boiled water to put in the bag, and it got distorted, and I had to order a new one. But thanks again for the video.

[@VacMaster1991]

Thanks so much. I'm so glad you liked the video

[@lavanbautista7288]

If it is the belt, how do I replace it because it doesn't look that easy.

[@LisaCaupp]

I've searched and searched for a video without all the extra added junk in it. Straight to the point. Thank you so very much!

[@VacMaster1991]

@@LisaCaupp no problem

[@gradywilson9213]

I have done all of those things. We live in the Southwest where we have hard water, which clogs every thing small. Lastly I am 70 years old, nowhere near as flexible as I use to be, and my back reminds me of it. Bissell is a maintenance intensive cleaner, if I can't get it to work, I am going to have to look into a better product, where I don't have to do a complete rebuild everytime. If you are lucky enough to live 7 decades, you'll know what I mean someday 😊

[@VacMaster1991]

The best thing I could recommend would be the hoover smartwash. It's incredibly easy to clean and maintain

[@gradywilson9213]

@@VacMaster1991 We were in the same wavelength, I just purchased one. Thank you.

[@gazelam]

Thank you, VacMaster. Our machine wasn’t spraying water, and now it is. The wife is much relieved.

[@VacMaster1991]

Good to hear

[@roywashburn7575]

Seriously… thank you. Just about to throw mine in the garbage, and came across your video. Who would have known belt access was to the water pump?🤯 Learned a few extra things and saved myself a few dollars as well as better knowing my machine. Thank you. 👍

[@VacMaster1991]

Your so welcome

[@AE-xx3st]

Mine made it to the porch but I am so glad I ran across this video before I hauled it to the dump

[@cherylc2604]

Thank you for the tutorial. I was able to clean mine up well and also determined that the belt had slipped off. It's fixed and working like new again!

[@VacMaster1991]

Glad I could help

[@nailsbyandreamua]

Thank you for making this video very informative. My bissell’s belt come off the motor so it was prevent the water from spraying. If it wasn’t for this video, I would have never thought to check the belt access. I was so focused on the red gasket since other videos were saying that was the issue. So thank you!

[@VacMaster1991]

No problem. I'm glad the video was helpful

[@Tony_Hawks_Existential_Crisis]

​@@VacMaster1991I came here to make the exact same comment as the person above. I've repaired vacuums before, but never a carpet cleaner. Your video helped me figure out what was wrong. Thank you so much!

[@anilborah3127]

I’ve had this vacuum for a few years now and it’s still going strong. kzbin.infoUgkx8ISPQRRAfpAaX4msGjyodObTBnlj4T5g I was cleaning it today and thinking about how much I love no bags to buy and that it comes apart for easy clean up. When I first purchased it we had two dogs and a cat and it kept up well. The suction was great then and still is now. I’m always amazed at the amount of hair it picks up, it works better than any other vacuum I’ve had for pet hair. The attachments are handy and work well. It’s easy to use with arthritic hands. I just had to come write a review because I’m still so pleased with this purchase.

[@VacMaster1991]

Is there a squeegee available for hard floors

[@kaelapierce521]

You saved my day. Thank you so much! My belt had come loose!!! It took 2 videos and reading the manual and doing EVERYTHING ELSE to find this gem. Thank you!!!

[@VacMaster1991]

@kaelapierce521 no problem. Glad I could help

[@hoponpopify]

Thanks very much! The belt is always a good place to start. Mine had slipped off.

[@VacMaster1991]

Glad I could help

[@milanil.9344]

We looked at two other videos before yours with no results. It was YOUR video that finally diagnosed the problem. Thank you! 🎉

[@VacMaster1991]

Great. Glad I could help

[@jaldep91]

This is the only video that helped me! It was that slipped belt under that plastic piece by the wheels. I watched a ton of other videos and search the web for help for an hour! Came across yours and within 2 minutes got it figured out. So thank you!

[@VacMaster1991]

@@jaldep91 glad I could help

[@DoZiDoz.]

Thank you so much! I found one of these that someone was throwing away it was spraying so I checked the belt like you said and it just popped off put it back on and boom works like a charm! 🙏

[@VacMaster1991]

Glad I could help!

[@Aysiareadsromance]

Thank God for this video! My belt came loose after looking and i was panicking cause still had to to the water rinse on my carpet and it wasnt working! Thank you so much! You're a life saver!

[@VacMaster1991]

I'm so glad the video helped.

[@dodrbeckd]

Thank God for you! I am so stupid…. I did all the taking apart , cleaning and then I went to your KZbin post. My cleaner was not sucking up the water. Yes because somehow it was switched to attachment. Boy do I feel stupid. Thank you so much!!!

[@VacMaster1991]

It happens. Glad I could help though

[@nikkilovetheyardsale-again2608]

I litterally put mine in the bath tub and use my bidet sprayer or you csn use the shower head on hard stream to get into the small holes. That gets all the hair out. i flip it, reclined and spray the brushes and up inside there. All the holes he was saying to clean you can just rinse out. Much easier.

[@VacMaster1991]

I do that with some of my carpet cleaners. But be careful not to get water in places it shouldn't be

[@teresas683]

Got it working again! Couldn’t find the manual anywhere,,,and I’d always rather watch a good tutorial anyway!!nthanks!

[@VacMaster1991]

Glad it helped

[@darkness5100]

No spinning on the flow indicator was the problem for me. Belt came off and the video showed me exactly how to check it and fix it. Thanks!

[@VacMaster1991]

Your welcome. I'm glad you found it helpful

[@realrulender]

Thank you so much for this. I inherited this one from a friend who didn't really take care of it. Now I can actually clean my floor lmao.

[@VacMaster1991]

No prob. I'm so glad the video helped you

[@Lo-Ammi]

Thank you so much for this video, your steps to check fixed the issue and saved me from a sopping wet carpet! You rock!

[@VacMaster1991]

You're welcome!

[@laurapowers6203]

All of the obvious I still have no suction. I wish you would have covered that lime green tab that was his top of the nozzle. What if there's a clog in the hose where does the suction come from...?

[@cindyorr9323]

Thank you I just got a used one. Was really dirty but cleaned it I thought pretty good. Was not getting any spray or little suction and following you step by step, skipping the belt. It is working great now. Thank you

[@VacMaster1991]

Glad I could help

[@amyhicks4773]

You're the best! Thank you so much for showing me how to fix all the frustration that I've been having with my machine lately

[@VacMaster1991]

Glad I could help

[@dominiqueguthery578]

Thanks for the video, very informative! My steam cleaner was not sucking up water, so immediately i knew it was a suction issue, but was overlooking the issue. It turns out, the red filter cap attached to the sllution tank lid was covered with lint. As soon as i had removed the lint, it was sucking water just fine again.

[@VacMaster1991]

Glad my video helped.

[@Keefer66]

Thank You I just bought this vacuum last week threw away the box when I put it together.. it stopped spinning I watched your video checked everything you said it was the last thing the belt on the side of if came off somehow if wasn’t for Your help I would’ve had to thrown it away

[@EasyModeFishing]

Thanks! Turns out the belt on mine had come loose somehow.

[@VacMaster1991]

Glad i could help

[@MKrawford]

Thanks!

[@VacMaster1991]

Fantastic. I'm so glad you liked the video. And thanks for supporting the channel

[@karleeharris6942]

I was really, really hoping this would help. I especially believed it would after opening the belt housing & removed a bit of hair twisted along the edge of the belt. But no. Still no spray from the bottom or the hand tool. I know there’s a way to reset the hand tool, but can’t recall…I think you just hold the spray button down for 10 seconds. At any rate, mine still isn’t working. I have to say…as much as I love how well this particular machine cleans, this is my 3rd one that just stops working altogether. This time I’m pretty mad about it because I’ve only used it about 5x on 2 bedrooms. I won’t be purchasing another bissell after this. That said…thank you so much for the walk thru.

[@VacMaster1991]

That's annoying. This machine has issues for me as well.

[@susanliberty5059]

I think to restore prime it takes 30 seconds.

[@illitero]

Thank you so much for the thorough video. I was just now tasked with troubleshooting ours and this was the first resource I checked out. However... I'm loathe to leave without commenting on the "Removing Belt" chapter. I was actually _yelling_ at my monitor while you were fumbling with getting the cover off, hahaha. A quietly confused "you're using a soft nylon spudger to open the lock tabs?" quickly went to _"JUST LEAVE THE CHIP THERE! JUST LEAVE IT THERE! NO, DON'T TRY TO PRY IT, JUST PUT THE CHIP IN AND-" At that moment the chip crumbled. I realized how foolish I was being and stopped vocalizing my frustration at that point, being glad you eventually got it open with that method. Pro tip for using that tool set for this task in the future: just, uh...leave the chip in there in the gap you made, then move to the other tab 😅 Though as alluded to, the use of that spudger will do more damage to it than being an effective pry tool; especially when facing the slightly increased tension on the second tab. But leaving the chip there in the gap means that the cover pops up on its own when releasing the second tab. Easy-greezy! Pro tip 2: Use a medium-ish flat-head screwdriver for greater effectiveness and tactile feedback when manipulating the tabs. Considerably less effort (and bending of a spudger) to unlock them. If you're worried about potential scratching, just lay your cleaning rag over the opening and gently push your screwdriver through to pull in the rag as a soft barrier. The fit may be a bit tight given the thickness of the rag, but as long as it's not too thick you won't have issue with getting enough of the screwdriver in for effective leverage. I hate the thought of giving unsolicited advice, but it's at least *genuinely* helpful information for anyone open to it, haha; and I figured little tips to make the job easier would be appreciated on a video designed to help others ❤ Aaand then I noticed at the end that your iFixit set has the metal prytool and couldn't help but release an exasperated sigh and say, "you had that the _whole time?!_" hahaha P.S. - The chip isn't designed to pry, it's meant for sliding between surfaces to cut adhesive. You experienced an unfortunate destruction of the chip, and I'm sorry for your loss. RIP lil' plastic chip 😥

[@VacMaster1991]

I tried the ifixit tool on another vacuum before and bent it. The fact that it's so difficult to remove the plastic cover shows how annoying the design of this thing is.

[@illitero]

@@VacMaster1991 absolutely! Literally dealt with the same thing to discover the floppiest belt I've seen and a water pump that feels like it has rocks in it haha. Since you responded so quickly (I hope I didn't offend you, sorry if I did 🙏), do you happen to know if the water pump is serviceable? I haven't started research on it yet.

[@VacMaster1991]

Lol no. Your comment was funny. I have never fully taken this apart. I returned mine about a month after this video.

[@dianaabel1670]

Thank You so much, I’ve watched several videos and this one did the trick for not picking up the water. I had it on floor setting, took off cover and moved the floor/tool tab a couple times. It was stuck closed. Whew. Only took me an hour to figure it out. Lol

[@VacMaster1991]

Glad I could help

[@MultiCasking]

Boom! It took me 5 videos but I finally found this video and it answered all of my questions. Thank ya much.

[@VacMaster1991]

No problem. Glad I could help

[@maryloustronach3875]

Thank you BUT I also need to know how to put them solution in and fill the water tank, etc.

[@VacMaster1991]

@@maryloustronach3875 that's in the instructions and on Bissell website

[@SusanWalton-z6y]

We yrued everything then checked the belt after seeing this. Thank you.

[@VacMaster1991]

Glad I could help

[@bridykes9986]

Thank u for this video hun im so frustrated with this damn thing 😅 mine wont spray. 🤨😒🤔 i have city crap water ( live in country in east tn )and didnt kno if that was the issue or maybe my two fur ball doggies clogged it 😅 im gonna go try ur suggestions i appreciate u ❤

[@VacMaster1991]

You should get a water softener if it's that bad.

[@sona7s]

Thanks, this video is extremely helpful.

[@VacMaster1991]

@@sona7s thanks so much

[@susanhamilton1822]

I have an older model that has only ever worked once at picking up the water. It doesn't have any of the parts under the tank that your are showing here. I'm getting ready to throw it out and get a little mini like I used to have.

[@VacMaster1991]

If the parts under the tank are missing, then they must have gotten lost

[@DiversionTube]

Thank you! The belt popped off mine and wouldnt spray. Greatly appreciated.

[@VacMaster1991]

Thanks. Glad the video helped

[@kaosaefong2270]

Thanks for the tutorial it was very helpful, when I open it just found that the belt was off we almost end up throwing this machine away,lol... Despite only been used once or twice when bought brand new... hehe...😅

[@VacMaster1991]

Glad I could help

[@andreah6175]

I come to learn from your videos and thought I'd have found the culprit but not quite. So thanks for showing me about the spinner filter, it was absolutely full of what looked like tiny crystal materials (tap/solution sediments most likely) After cleaning it, a little more accumulated. I can tell some water/solution is decreasing from the reservoir as well as some accumulation in the dirty tank but I am using it on linoleum to better see how the water is spraying & its intermittent & actually that spinner only moves every so often as well so to me there is some connection, meaning its only spraying when the spinner is moving but its not consistent to when I squeeze the trigger..... any ideas? Lastly, I find it strange that the dirty water tank is so large compared to the water tank, got to thinking Ive seen other models where clean water was added to the larger one but I dont see that on this model . Thanks for your time!

[@pamzellnerseligman7977]

Oh my gosh! This is an amazing step by step video. I am grateful. I was gifted this and it sat in a garage for a while. The belts had to be replaced. I would love to see how to you the hose and hand pieces work. Nothing is happening with mine. The hose was wound incorrectly and pieces have been falling out. Help.

[@VacMaster1991]

Glad I could help. Explain what is going on with the hand tool in more details please

[@pamzellnerseligman7977]

@@VacMaster1991

[@pamzellnerseligman7977]

There is no spray coming out of the tool, no suction, and the hand tool that has a belt does not turn. I did everything else in your video yesterday.

[@VacMaster1991]

I am not sure what could cause that without seeing the machine

[@pamzellnerseligman7977]

@@VacMaster1991 OK

[@bh1388]

Thanks… didn’t know about the handy dandy toothbrush… I was your 1000th LIKE!

[@VacMaster1991]

Sweet. 1k likes

[@bobconnell7454]

Cleaning the filter made a big difference! Thank you!

[@VacMaster1991]

Your very welcome glad it helped

[@SW-ok8nd]

Thank you. My belt had come off. I put it back on and voila!

[@VacMaster1991]

Glad the video helped you

[@blumartini9606]

thanks im old guy always have to watch ure ckip to vail me out always that kittle 1/2 inch filter gets clogged

[@VacMaster1991]

thanks

[@janmchaney7912]

Did everything here and the main part still won’t work but I got the attachment part to work, so spot cleaning at least.

[@VacMaster1991]

What isn't working. The spray, suction or brush roll?

[@Corey-lk9od]

Great video! Very easy to follow and troubleshoot after watching this. Thanks!

[@VacMaster1991]

glad I could help!

[@personalchannel7533]

Very informative video. Thank you. Just purchased ours and it wouldn’t spray. Belt was off.

[@VacMaster1991]

Sweet, glad you found the video helpful

[@kadayshalee]

Thank you so much for this video I just bought one and it was not spraying at all I kept trying to figure out why and I opened the belt compartment and the belt somehow came off !!! You saved me from going all the way back to return it

[@VacMaster1991]

Glad the video was helpful

[@BlloodbaathDied]

This comment saved me not only from returning it, but also saved me the time of not having to watch the whole video ! No one else on the internet talks about a brand new one !

[@markmellowgames]

How do replace the belt I have a new belt and I know how to get the plate off but I don't know how to put the belt on

[@kadayshalee]

@@markmellowgames I’m not really sure I haven’t had to replace my belt yet .. it just came off of the silver exposed rod I just put the belt back onto it

[@markmellowgames]

@@kadayshalee ah thats okay i figured it out its actually quite simple once you've figured it out thanks tho :)

[@camilaaguirre8877]

It was the belt!!! 🎉it was just off😮 THANK YOU SO MUCH!!!!!

[@VacMaster1991]

Glad I could help!

[@belindamiller7900]

Excellent video. Had my cleaner for a good few years and it looks like new. Thank you.

[@VacMaster1991]

Glad it helped

[@Br7ac5us]

Great video. I have a similar model that stopped sucking up water. You gave me many good ideas of places to inspect. Hope I can fix it.

[@Roger-Peterson-o7g]

Great video. Found filters' clogged and the bain belt was off.

[@Roger-Peterson-o7g]

Wish there was something to stop the belt from coming off the main motor. That was the biggest problem.

[@matthewmckeever3741]

Thanks for the in-depth on how to fix all these issues. I got one from goodwill and save a ton on it but have had some minor sucking/spraying issues

[@VacMaster1991]

Did you get it working

[@matthewmckeever3741]

@@VacMaster1991 I haven’t cleaned with it yet. I took apart almost everything and started a deep clean on it. I still have the brush roller out because it definitely needs a lot more tlc than you’re great roller. Thinking of replacing it with a new one since it’s so worn and frayed together

[@VacMaster1991]

@@matthewmckeever3741 , yea if the brush roll is frayed it probably needs replacing

[@davoce2]

Also hose from pump to bottom of water tank and push x bottom tank

[@VacMaster1991]

Yes that's another

[@barbsaxton1208]

loved this video, did all that but weak suction.......thanks!

[@VacMaster1991]

Glad I could help

[@charmainedavidson5224]

Very helpful the little red filter was stopped up. 7-24

[@VacMaster1991]

@@charmainedavidson5224 thanks

[@skydelgado4030]

My suction will randomly stop and make a popping noise when it does. it will work for a few minutes than pop and stop sucking?

[@andreadochstader6316]

It is not sucking up water from the floor into the resovior. I have taken everything you have done and still not working. Will use soap and water from the clean bladder.

[@julesmooney]

Great video, thank you! My belt was off the metal rod. However, once I started vacuuming it kept slipping off again repeatedly. Argh!!

[@VacMaster1991]

Darn it. Honestly this carpet cleaner isn't very good anyway. Mine kept leaking so I eventually returned it

[@julesmooney]

@@VacMaster1991 Ah did you? Yea I’m not impressed so far. Thanks for the quick reply.

[@marymechler8451]

Great video and I have this exact machine. I went step by step in your video and made sure everything was clean. It worked for the first small room and then quit suctioning again. I could hear a sound that made me think that there was a cut off of air or something. When I would take the water bucket off and put it back on again, it would work for a few more strokes, but the same thing happens over and over. I looked in the bottom of the compartment where the water fits and it is clean. Do you have any ideas? Thank you! Great video.

[@VacMaster1991]

Sounds like the float valve is broken. I would check out getting another water tank.

[@marymechler8451]

@@VacMaster1991 Thanks, again. I got a new water tank and it is working. One more question, similarly to the water dispenser, the cleaner level doesn't seem to be changing. Do you think this is the cap assembly that needs to also be replaced? Thank you.

[@jenniferrose5805]

Thank you! Very helpful and attention to detail!

[@VacMaster1991]

Glad I could help

[@dalemoody6366]

Thank you so much did what you said and showed my bissel is up and running. The belt had slipped off...

[@VacMaster1991]

So glad the video helped

[@emmasurf8768]

that was helpful. i found my mom's older machine that someone had borrowed and returned dirty. Took a while to clean it. I'm going to fashion one of those told or of plastic cause that looks helpful. My problem is that one of the bridges is attached to the hose and even pressing the button didn't release it. I'm not sure if there's a trick I'm missing but I can't use it to clean the carpet till I figure this out. any suggestions?

[@emmasurf8768]

sorry about the odd aurocorrects i was trying to say that one of the brush attachments is stuck on the hose and I can't release it even pressing the button. I wondered if there's a trick

[@VacMaster1991]

You could soak it in warm water. Also you can clean carpet with the brush attached. Just set the machine to hard floor mode

[@tanyaclark9514]

Thank you so much! I went through step-by-step and my machine is perfect now :-)

[@VacMaster1991]

Glad I could help

[@derrickoliver3835]

Thanks 🙏 a million you’re dope! Loose belt was completely off!! Slid back on worked like magic

[@VacMaster1991]

Your so welcome

[@christinahelmer6893]

Good job thank you so much! What about the bladder? Can you take the bladder out of the casing to clean around the bladder?

[@VacMaster1991]

The bladder doesn't come out

[@rmayer1]

Thanks man, the little white filter was totally clogged.

[@VacMaster1991]

Glad I could help!

[@meghannw4532]

Thank you my belt was the issue now I know what to do

[@VacMaster1991]

Glad the video helped

[@colleensgotcha]

Mine wasn't spraying so i checked the belt and it had slipped off the pulley put it back on and it now works!

[@VacMaster1991]

Great

[@rmower3428]

Quality helpful video Mr. Keep up the great work

[@VacMaster1991]

Glad you liked it

[@edithtearry1599]

Thank you, you are a lifesaver. It now works.

[@VacMaster1991]

Glad the video helped

[@tiffanybrantner1452]

I can't get mine to spray water. I just got it to. I'm so annoyed 😠

[@VacMaster1991]

Honestly I would return it.

[@DavidAnderson-wf2np]

Thank you! Saved me from buying a new one!

[@VacMaster1991]

Glad I could help!

[@missiemcvey7804]

How to remove the shield behind the one over the rotary brush. Mine is not on straight & I'd like to put it on right.

[@VacMaster1991]

I don't think that part comes off.

[@NightFlame89]

How do you replace the brush belt and put the right (left when upside down) red piece back on? Lol

[@VacMaster1991]

I'm not exactly sure what you mean

[@honestyfirst2575]

Now I just need to know how to take apart and clean the tank

[@deereyes5646]

Hello, the issue I have with mine is that the tool sprayer is not working, no water from there (hand tool) Do you have an idea what can be? TIA

[@stephaniebrown596]

So glad I found your video, I was able to remove the nozzle cover for cleaning!

[@VacMaster1991]

Thanks. Glad it helped you

[@DavidLuger]

@@VacMaster1991 Trick question: after removing the nozzle cover and thoroughly cleaning under there the diverter valve will not go back to the down position and the smart dial assembly is not properly linked up. Any tips? Thanks.

[@VacMaster1991]

@@DavidLuger I'm not sure actually.

[@DavidLuger]

@@VacMaster1991 It's fixed and linked up now. The whole cover had to come off. Thanks for getting me started.

[@VacMaster1991]

@@DavidLuger no problem

[@huntervasquez115]

Having an issue with mine, tools work fine spraying & suction, but the "floor cleaning" option does not spray at all. suctions works on it just no water spraying. Cant figure it out.

[@xblFrezola]

Thank you for this video. It was just the belt, but the rest of this video was very helpful.

[@VacMaster1991]

Thanks so much.

[@j.azaliaarmenta3821]

Can you make a video about the wand? Mine stopped working the button seams to be stuck, how can I fix that? Please thank you

[@VacMaster1991]

Try a little lube. If that doesn't work contact Bissell

[@Alpha_B95]

I just replaced the belts on mine due to it turned on but wasn't working lol So I used it BUT the handheld was spraying without the cleaner mixture.. I'm just at a loss. I did take it all the way apart n legit just found a PET bissel lol the small turn windmill underneath is kinda dirty I didn't clean so yeah my issue is no spray for actual shampoo just water... still sucked it up good, but didn't spray water AND shampoo...

[@ppenrose2]

bracket holder on one side brush flops out on that side gets stuck on the carpet how to fix this?

[@VacMaster1991]

Use some NON FLAMMABLE lube and move it up and down until it loosens up

[@anthonysteele8993]

It was the hose! Thanks so much

[@VacMaster1991]

Glad I helped

[@belindamiller7900]

Hi. My red thing isn't spinning. Checked belt but it's OK. Machine cleaning streaky. Any suggestions. Thanks.

[@VacMaster1991]

Sounds like there is an issue with water flow. See if the tank is in working order

[@chevyguy-hf1yq]

You sir, are absolutely AWESOME!!! TY !!

[@VacMaster1991]

Thanks

[@mandolinman2006]

I've got a Bissell Healthy Home 2. It's quit spraying water when I squeeze the trigger. I've swapped triggers but that didn't work. Should I replace the pump or solenoids next?

[@VacMaster1991]

Pump probably. Does it spray from the hose?

[@mandolinman2006]

@@VacMaster1991 I haven't checked that yet. I know, when I first turn it on, the flow indicator spins for a couple of seconds.

[@mandolinman2006]

@@VacMaster1991 the was something came out when I turned it off but nothing came out when it was running.

[@mandolinman2006]

@@VacMaster1991 I'm about to chuck this thing. Replaced the pump and still can't get it to work.

[@VacMaster1991]

@@mandolinman2006 What is wrong?

[@janicerobison303]

Did everything u said still no water coming out I did notice the red thing on top u said should spin isn't so I checked the belt it's on and it's moved when turned on. Any other ideals

[@VacMaster1991]

Did you check both belts

[@KenShinobii]

Thanks :) I don’t own one myself but Im helping a friend fix theirs with the help of your video :)

[@VacMaster1991]

Glad the video was helpful👍

[@-Minto-]

thanks a bunch man didnt have a manual for this, now i got her running like new :D

[@VacMaster1991]

Glad you could get your machine working again. I'm happy the video helped

[@marynoel2278]

I did all that and it still sprays intermittently. The flow indicator randomly spins then stops. No clogs anywhere. Time for a new machine. How is yours spotless???

[@VacMaster1991]

It's spotless because I cleaned it before this video

[@KeishlyR]

Thank you so much!! I was having trouble with my vacuum, turned out the belt broke so I’m replacing it this week! 🙏🏽

[@VacMaster1991]

Your welcome

[@strawbunny93]

Thanks, man! It's finally working again. 😂

[@VacMaster1991]

@@strawbunny93 fantastic

[@aracelimarungo9966]

I remember one time I thought the vacuum was broken and I had it on tools not floor.

[@VacMaster1991]

Woops

[@faithgrace4644]

Thank you so much for this video. It helped me tremendously ❤

[@VacMaster1991]

You're so welcome!

[@larrysimmons6082]

Hello great video thanks ..I would like to ask is the brushes supposed to turn all times ? or just when spraying.?? because I never do see my brushes never moving! Please help

[@VacMaster1991]

The brushes always spin.

[@larrysimmons6082]

@@VacMaster1991 thank you..I found the problem the belt slipped off thank you

[@Airborne8389]

Great video. You not only answered the question I had but a few others that I was curious about 👍

[@VacMaster1991]

Glad the video helped

[@flricangirl28]

Thank u for this video I got the same model I purchased it in dec n I notice I have problem sometimes with the water to spray out today i use it .it spray and it stop I’m gonna do those step and see if I could fix the problem.. again thank u for doing this video