Blackmagic ATEM Mini Extreme ISO: Overview and Live Demo

What's up everybody; we're back this week with a familiar video! This week, we'll be doing an overview and live demonstration of the ATEM Mini Extreme ISO from Blackmagic Design! I say this is familiar because we did the same thing for the ATEM Mini a few months ago, but now... it's time to get EXTREME. So join us as we play with all of the bells and whistles on this awesome 8-HDMI switcher from Blackmagic Design!
You can rent the ATEM Mini Extreme ISO at our website below!
ATEM Mini Extreme ISO ► bit.ly/3uSpdPz
0:46 ► Physical Review & Input/Outputs
1:46 ► Button Layout
3:44 ► Switcher/Program Demo
7:34 ► Davinci Resolve Workflow
Stay up to date!
Instagram ► / lensprotogo
Facebook ► / lensprotogo
Twitter ► / lensprotogo
LensProToGo ► www.lensprotog...

[@Nicknamelessone]

The knuckle supporting the gobo arm that holds your overhead camera is on backwards. The handle should be on the right if you're standing behind the C-stand with the load out in front of you. This way the knuckle tightens as gravity pulls down the load.

[@basecampsuite]

Best video I’ve seen demonstrating the capabilities of the ATEM. Thank you!

[@rocus80m]

Exactly what I thought, really informative!

[@sasishaan]

Super informative and chill walkthrough! Loved it!

[@sxm_abel]

Is it possible to have one of the outputs as multi view and the other output for showing the selected shot?

[@J-Dawg-1]

Great video and awesome music!

[@ericdelano8703]

Thank you so much for the helpful tips!!!!!

[@glennharris]

Thanks super informative!

[@christianmunganga195]

Hello, thanks for the video, so please me how to convert one of the usb c out to hdmi out so that i can use another monitor to screen out a program without using the two hdmi out already on atem mini extrem

[@DannyVeiga]

Thank you! Wanted confirmation that both USB's would work for recording to SSD & using it as an input to the laptop

[@BrianBaccus]

Yes, they work that way, you can cannect to the interface to run it from your system and use the webcam and go live on zoom, fb, etc.

[@lovechildtv]

so it doesn’t put the different video tracks on separate tracks?

[@krishnansrinivasan830]

Awesome & Thanks :)

[@gilbertmartinez6538]

...would like to see how it works with projection and a analog audio mixer? ...just out the hdmi output to decimater and then to projector I guess ...analog board record out into mic feed in??? I guess I can run projection out of a laptop too

[@ENproduction763]

hello, i have a blackmagic atem studio hd i want to go to extreme is it worth it.?

[@AxelAxe]

Can Blackmagic please make a 4K version of this switcher???

[@GrandProductionsMedia]

A-TEM bro

[@davidpatterson3614]

EXACTLY!! Pronounced A-TIM NOT ATOM

[@deehart]

Do you need to buy an external monitor? Which would you recommend?

[@mazetoeden9334]

awesome video! I don't get the two HDMI out though, what are they for?

[@richietran9700]

seems like a lot of frame drops when you using the face camera. is that the camera or the switcher itself?

[@LiveProductionTips]

I noticed that too. I do not believe it was the switcher, I think it is the way he recorded it

[@dylannolan7454]

@@LiveProductionTips he had wrong shutter speed. You would think he would notice that

[@adwarsada4091]

So we can do basic color correction for non black magic camera?

[@mjoliver3263]

Does the media player not play video files and are they available as an input source?

[@honmun3199]

Hi!, how do you make camera 6 a video showing fishes? how do you include video in camera 6?

[@S.ARIF_2020]

you can connect a pc/laptop to that input via HDMI and play whatever you like

[@Tim-Miller-]

Nice video. What type of Dell Laptop would you suggest?

[@SteveMyra]

HI a bit of Radom question but what do you call your background wall behind you in this video and how is is made? Great video about ATEM mini extreme as well!

[@MAG-INSTINCT]

Hello! thank you for this awesome video! I have a question: in our studio, we have different cameras, and cannot control in the ATEM software (camera control panel, in your video at 3:57 ). what's wrong? we connected through HDMI to the channel 6, 7, 8. We have a panasonic 4K cam, and 2 sony. thank you for your answer!

[@jenayahawreluik4452]

Does the ATEM automatically record everything to a hard drive or do I have to set that somehow?

[@AldyAlyaPro]

Steady Ka outside the country price how much.Saya from Indonesia

[@MrSmartInventor]

How works Select BUS?

[@ozzyosmond1]

Great video - just got one of these, but when i record, I only get a single video file. Why am I not getting the separate audio, video and Resolve files to post edit?!

[@BrianBaccus]

Are you sure you got the ISO version, the regular extreme does not have that capability

[@ozzyosmond1]

@@BrianBaccus I figured it out, thanks.

[@robertovanoncini1453]

Buongiorno, bel video esplicativo. Vorrei sapere se in questo modello, registrando e facendo lo streaming, avviene la stessa cosa che succede nel Mini Pro Iso. La qualità delle registrazioni su hd sono influenzate dalla banda di upload dello streaming o le due cose sono indipendenti? Grazie. Hello, nice explanation video. I would like to know if in this model, when recording and streaming, happens the same thing as in the Mini Pro Iso. Are the quality of HD recordings affected by the streaming upload bandwidth or the two things are independent? Thanks.

[@not-bot]

freezes on main camera??

[@MGritts22]

Thanks, this is super helpful! What software is that at 3:51?

[@sawekk3433]

It's just an another tab of ATEM control software for managing compatible cameras (mostly BMD)

[@AJCoReTV]

Could I open that file in FCP?

[@KodiakCup]

Awesome overview! I’m having a problem with mine where I can get audio in through the MIC 1 input and see the audio levels on the PROGRAM audio meters, but I can not get that audio to be recorded, or have it go out from my main HDMI OUTPUT. My audio meters in my OUTPUT window show no audio, even though I see the audio in my PROGRAM meters. Any ideas? Do I have to do something in the setup to get audio to pass though and out of my main HDMI OUTPUT? Or should that be happening automatically?

[@LiveProductionTips]

Hey did you hit the ON button on Mic 1 ? make sure its ON

[@KodiakCup]

@@LiveProductionTips Yes, it was turned on. We ended up getting the main output audio to work, but never could get the “Output” audio meters working to monitor the audio passing through the main output.

[@LiveProductionTips]

@@KodiakCup hahah so hard to understand lol, so you mean you can hear and record the audio on your PROGRAM out, but cannot see the meters on your Multiview for the MAIN PROGRAM ? Do you see audio meters from the HDMI input cameras ?

[@KodiakCup]

@@LiveProductionTips hahaha yes, I can get audio from my program output into my computer and record it and it sounds good. But the audio meters listed as the Program output meters aren’t working. So I can’t monitor my final audio output from the switcher before it hits the computer. I can see the other audio meters and they all seem to work fine. Just the main “master” audio output meter shows like there is no audio, even though there is. (Hopefully I wasn’t too confusing with that haha.)

[@LiveProductionTips]

@@KodiakCup ok now I understand. It could be a software/firmware issue. Try to check if there is no update needed for your switcher . I used the Atem mini extreme ISO few days ago I had all the meters working fine . I will be making a video about it probably this week

[@joshuagardner894]

Does the unit have wifi capabilities or does it need to be paired / tethered to a PC? I would like to have the unit completely handle the live streaming via wifi, only plugging in a laptop to overlay green screen graphics. If I were to use the laptop to setup the stream key, go live, and literally disconnect my laptop from the ATEM, would the ATEM be able to stream on its own without the laptop?

[@BrianBaccus]

Yes, you setup your rmtp keys first by connecting with the laptop/pc then put your streams online to auto, so that when you hit the on air key, it goes life that instant. then you will not need the pc connection

[@834673]

Can you records via 1 USB-C to an SSD and output via 2ns USB-c to webcam/zoom ?

[@lensprotogo]

Yep! I think that's just what they had in mind with this model

[@MrSvacko]

Hi, thanks for your Demo but why there are som droping problems at some parts of your video? Time: 9:26 ... I have a similar problems with my only 4 chanel ISO but I can't find why it happend.... Any solution?

[@indi2174]

All that is good... But does it use fan just like the mini pro .. and is it louder than the mini since the extreme pro iso has more buttons and more on- board editor

[@abrammkhize]

hi im struggling to get good high recorded quality please help

[@aahz2323]

Thank you sir. I'm looking forward to your full demo.

[@MakeAdifferenceMovement]

My green preview button doesn't work please can you help ?

[@giacomconsult1015]

Hello.. My Green preview bottom doesnt go on.. how do i do the setting

[@nyakallotseole2781]

I've got the same problem, bought the mixer last week was trying to use it over the weekend and I realised the same problem you have, I ended up going back to my Atem Mini Pro

[@TherapyBitesARTLAB]

Recommendations for connecting to MacBook Pro, 7 cans, RodeMaster Pro? How about StreamDeck? Best place to store video?

[@hakeemshady]

How many cameras can it handle u said?? I may have missed it. Thank you very much for your time

[@MrClassicRobot]

If you use OBS instead of the ATEM software, will the audio from the HDMI inputs still carry through to the livestream?

[@GIFTKIWELU]

Blackmagic ATEM Mini Extreme ISO, do it allow all HDMI out port to be connected to two different monitor as not multdisplay

[@terrylfarnsworth6254]

Can the Two HDMI outs be set up as a clean program out as well as a multiview? or are they both locked as the same?

[@Videofarming]

Can you select audio from one camera continu.?

[@VictorMarinRoman]

HI! It is possible to connect a Multiview-Cam Monitor to see the 8 HDMI -Inpunt at the same time?

[@shreyasbhosale8501]

Does it take 4k inputs

[@yymediaprod]

No up to 1080p

[@lucasbasualdo6752]

Super cool vid, why are you getting video lag at times? i've noticed that same thing with the ATEM mini too

[@davidross9668]

I’ve been watching your ATEM video demo and both my partner and I love the features of this unit. I am wondering though what type of devices do we need to order to enable wi-fi transmission directly from the video cameras to the Switcher. Is it something you hook into the camera and then clip on to your belt? Are there separate transmitters/receivers that can handle more than one HDMI input? Can you recommend any brand and/or type of equipment we should order to make this happen? Thank you so much and keep up the good work! We’re fans and will continue following your KZbin page.

[@ornellaabrate7465]

very good . but for the more information about when and where i can discover ?

[@calvin_0]

What audio transmitter are you using in mic 1? i would also to use such than getting from the camera inputs

[@SOATV]

How well does it work wirelessly?

[@gjcarvalhais]

Hey man! The recording and davinci file only has the shoots that you had enabled during the live switching? or is there a whole video file for the whole segment independently of when you choose which moments were to be shown?

[@larrywhiteHSP]

I believe it will record each camera plus the program. This is what my ATEM Mini pro ISO does.

[@gjcarvalhais]

@@larrywhiteHSP Thank you!

[@Dann686]

I do have a little problem with auto and cut but do not work where I am trying to switch camera

[@LiveProductionTips]

It could be your unit that is defective. They usually work seamlessly

[@playonair4302]

Hi, I have one question. Is it possible to record all the video channels into an external hdd using 1st usb port and, in the same time, to use the atem as an external webcam using 2nd usb port?

[@guilledezoq]

Yeah

[@BrianBaccus]

yes, you can

[@davidpatterson3614]

I tried to watch but, i just can not get past your lack of knowledge of how ATEM is pronounced. If you have not been around the product or the professionals at BlackMagic enough to know it is pronounced “A-TIM” then how can I trust that you actually know what you are talking about.