BlackMagic Design ATEM Television Studio & HyperDeck Studio Mini - Quiet Fan Replacement

[@MeinDeutschkurs]

Thanks, exactly what I was looking for! I have no idea, why BMD still saves money at the wrong place. Most of do not use these in a server farm.

[@stevecooksley]

Thank you - you've just extended the life of my Studio Mini and stopped it from being a projectile.

[@markdonohue1419]

I am so glad I found this. My ATEM 1 M/E Production Studio 4K has 6 fans (4-40x10mm heat sinks and 2-40x20mm exhaust fans). I am ordering the Noctua replacements today and will install as soon as they arrive. The jet engine noise in my studio has deemed it virtually unusable for interviews. If I can quiet it down for the $85 fan cost and some time, it will be well worth it. I was thinking of going with a couple 80mm and a 120mm in the top of the case until I read a post re: the possibility of inducing RF interference by violating the shielding in the case. Plus now I have no holes to cut. Thanks for taking the time to lay this all out for us.

[@longerears]

Thank you!! I just switched out 1 case fan and 2 heat sync fans in my ATEM Production Studio 4K, and now it is as quiet as can be. The Noctua fans are rated at lower CFM, so I added a fan to my rack blowing into the ATEM just to help with the air flow. Your mapping table on ifixit was super helpful.

[@MatthiasLenardt]

Thank you for sharing. What a wonderful solution!!!

[@toddberntson6049]

THANK YOU!!!!! The fan noise was driving me crazy. What a great solution. So much appreciate you sharing.

[@elchristianpodcast]

Just installed 4 fans with 3 pins and 3 fans with for pins on my atem 1 m/e production studio 4k switcher, all new fans being Noctuna . The 4 fans 4x10 on the heat sinks power on right away but the 3 4x20 Pvm exhaust fans are not moving. Do you think there’s a threshold at which they should come on? I tested the old noisy cofans and those power on immediately. My wiring on the 4 pin exhaust fans was black to black, blue to blue, green to yellow and yellow to red which I think is the same you utilize in this video. Any advice as to why the exhaust fans are not powering? The heat sink fans are so quiet I love it I’m just worried the side exhaust fans won’t power at all and it can heat up the unit. Thanks In advance for any advice 😊

[@produccionesjimenez]

Desde Santo Domingo tengo un ATEM STUDIO Y TIENE EL MULTIVIWE DAÑADO, NO SE VEN LAS CÁMARAS. ME PUEDEN AYUDAR

[@longerears]

I like your solution better than cutting a hole in the top of the case and plumbing some 120mm fans onto the heat sync. How has your performance been since the upgrade? Also, what is the CFM difference between the fans you took out and the Noctua fans?

[@kaydombrowsky3770]

Danke!

[@fretboardbiology9314]

AWESOME!!!!

[@provisamail]

Hi! does the HyperDeck have an internal reset button?

[@_wolfenstein]

I think it's a 4 pin (or 3 pin) 2mm JST connector for those 40mm COFANs

[@Snugglepaw]

Did anyone ever make an adapter so you dont have to solder the connections?

[@AJaytheCEO]

I did the exact same thing with the same fans

[@oliverklein91]

Have you problems with the temperature during using the television studio with the new fans? Is it necessary to cut the housing on the fans?

[@AJaytheCEO]

@@oliverklein91 I didn't have temperature issues after fan replacement and I didn't cut the house like he did

[@oliverklein91]

@@AJaytheCEO Perfect, thanks for the quick answer. On Tuesday come the fans.

[@soaklabs7237]

@@oliverklein91 After almost a year it works fine. Remember that if the unit overheats, there is a cutoff built in. I have never run into it.

[@omvidtech2281]

I'm growing more and more skeptical of Blackmagic these days. The mini only records in progressive and the files don't playback on a Mac. Skip this product and avoid it like the plague. Get an AJA HELO or a DataVideo HDR-1.

[@ishizukahikaru643]

If yr talking about the mini recorder I think there not as useful for recording as you would like it to be. There more useful in broadcast setup using them for stringers running ME. If I were to get something for recording Atomos with SSD is a good choice.