When I was a kid some 60 years ago my Father and Uncle had a welding shop in a small town. The neighbour next door was an old German blacksmith who still had a shaft run shop. I can remember being fascinated by all the bearings , shafts, pulleys, leather or fibre belts and clutches perched up on the wall and across the ceiling to the various machines. Apparently it was originally run by a steam engine but when it finally became a non-repairable relic he was going to convert over to electrical power until he priced out a big enough motor and realized what power was going to cost to run in and being a thrifty German of the old stock he said "Fick Das" and went another way. Part of my Fathers operation was an auto wreckage and they sold him an old six cylinder Dodge flathead complete with a three speed manual transmission that they built a skid for and set it up like a donkey engine. The skid was mounted on a poured concrete slab outside of the blacksmith shop that had been the base for the steam engine and the main belt was run from the tail end of the skid through the shop wall. The battery for the Dodge starter was inside the shop where it could be kept warm in the winter months and there was a block heater installed in the Dodge engine itself for winter starting. Every morning the old boy would be out to start up the Dodge and then he would go back inside to his living quarters above the shop and have breakfast. When breakfast was over and the Dodge warmed up, he came out, disengaged the clutch, kicked it into first, let the clutch go and brought up the revs, then shifted to second and went back into the shop to start the day making and repairing farm equipment and horse shoes. The neighbours all knew it was time to go to work when then Dodge caught second and many used to laugh about it. It was a common belief that it was the only three speed with reverse blacksmith shop in Canada. One night, when I was about 12 or so, the shop caught fire, probably from a stray coal from the forge, and it burned to the ground. The old boy never managed to get out of bed and he, his machines, and the Dodge all went up in smoke together. It was a sad day for all but in a way somehow fitting. You see, he was in his late 70's and had nothing else in the world but his shop and his work and somehow it just seemed right that they all went together at the same time. One more Iron Man with his Iron Machines gone to Valhalla..............
@ddnaomi5 жыл бұрын
Great story
@paulmanson2535 жыл бұрын
Norman May What a great and terrible story. How long ago was the fire ? At least an old man did not die slow and hard by way of cancer or stroke or some other slow horrible and humiliating disease. All his life he worked hard and had personal pride and hopefully died quickly,hardly knowing what happened. Yep. Valhalla for him. Even though he died in bed,a death the old Vikings regarded as shameful.
@mute8s5 жыл бұрын
@@paulmanson253 Yeah he got into Valhalla because they needed a blacksmith with a set of tools like the ones that were lost in the fire.
@geraldschilli88702 жыл бұрын
That’s quiet an interesting story about German efficiency & ingenuity. I would have loved to have seen that.
@LPJMagicmusic4 жыл бұрын
Now I know why its so hard to find a good anvil.. this guy has every single one
@SHAD0WZOMBIE4 жыл бұрын
OMG lol I just seen your comment lol that funny
@marcmckenzie51105 жыл бұрын
Andrew mentioned the AT&SF (Atchison, Topeka & the Santa Fe), and I had to share that all my youth was spent in the city of Atchison. We lived five blocks up the hill from what I understood was in the 1970s, the largest metal casting facility in the world still operating at that time. It was owned and run by Rockwell International at the time, and in my high school years, I was hired to help with computer programming tasks in support of their engineering department. A couple of occasions saw me out on the cast floor which was exciting, terrifying, and humbling. Tough guys worked those castings which included modern railroad trucks for box cars, the turret frame for the XM-1 Tank, and stage rings for Saturn V to the boosters for the space shuttle. And all around was so much stuff like you both show here - it was like common debris! No-one was interested in historical preservation, which I learned when I tried to get interested in the old AT&SF 1860s train station And from elementary through Jr. Highschool, almost every day we crossed the large switching yard the railroad maintained from the 1880s. We found chunks of rail, piles of stakes, and all kinds of switch flags and other old gear. In high school I had friends working in their machine shop, and got to hang out - you both would have loved it. Sometimes in our youth, we don't realize the amazing things right in front of us! Wish I could take you both back and give you a historical tour!!
@anonymousgeorge43215 жыл бұрын
Now I see why I can't find a damned used anvil to use.
@capman9115 жыл бұрын
I was going to say the same thing when I saw your comment so I just gave you a thumbs up.
@824WaterBoy4 жыл бұрын
I love that he plans on making a museum for all of this stuff but man I cant help but feel sad that they wont be ever used again.
@ochocobunyonthesmitty19815 жыл бұрын
Awesome video and breathtaking collection.. I'm devided in my opinion, part of me is happy to see the restoration and preservation but on the other hand, there's alot of us out here that would love to have a quality anvil... to have so many sitting there unused is olmost sad...
@scarface-395 жыл бұрын
Good stuff!!! I love all these old machines they are what built America!
@jimjoebob775 жыл бұрын
What a wonderful shop and presentation of Andrews' collection. Thanks Adam
@johnbaldacchino77315 жыл бұрын
fantastic vid adam, all power to Alexandra for putting together such a great collection. for anybody who has any interest in the engineering past THIS PLACE IS HEAVEN !
@arktouros82435 жыл бұрын
Well, now we know where all of the old anvils and vices went, that's just an incredible collection.
@mikesak78385 жыл бұрын
Now I see where all the anvils went! It's a shame they are all just sitting there not being used.......
@rynohorn38195 жыл бұрын
I thought I was an asshole for hoarding .005 percent of what this guy hoards. 35 anvils plus a bunch of other related forging goods. This dude has cleared my conscience
@debbiebissel505 жыл бұрын
Great seeing all of this equipment because it brings back great memories of when I was an apprentice in N.O. Right where the D-DAY Museum is now. In the early and mid 70s I was an apprentice in the shop where all of the machines were run by two line shafts and you engaged the clutch on all of the machines by reaching up above your head where there was a piece of 1x4 which ran the length of the lathe or power saw, drill press,mill and the rest of the equipment. The most exciting part was when you wanted to change the speed of the equipment you had to take a piece of 1x4 board put it against your foot and push the board over either way to move the belt over to the next pulley while the belt was running and you really had to watch the alligator clips which held the belt together. Great experiences and you either paid close attention or you worked somewhere else.
@paulorchard79604 жыл бұрын
Amazing collection! Its no wonder no one can find stuff like that, its all there! 700 vice!!!
@thomaseisen3045 жыл бұрын
Thank you so much Adam !!! This video is AWESOME ! So nice to see that there are people out there who care about history that way !!!
@whiskeyjim41265 жыл бұрын
That's a lot of awesome stuff sitting around rusting while people want these to actually do work.
@matthewkantar55835 жыл бұрын
This fellow probably kept a lot of it out of the scrap yard. Your avarice is silly.
@BPantherPink5 жыл бұрын
I don't think "avarice" is the right word here ??
@matthewkantar55835 жыл бұрын
Jealousy? Resentment?
@whiskeyjim41265 жыл бұрын
@@matthewkantar5583 Not that. I hope he gets his museum set up. I would love to visit. Other than that it's a lot of steel sitting idle instead of making stuff. He can do what he wants with his money.
@VersinKettorix3 жыл бұрын
That material rack at 16:24 is really cool. They put a bit of style into something mundane. I like that.
@Huskiedrive3615 жыл бұрын
Sure hope Andrew's building has good floor joists. Man that's a heck of a lot of anvils in one place. Thanks for sharing, Adam!
@boelwerkr5 жыл бұрын
The bridge shaped anvils are specially made to bend heavy rods of iron into u shape and similar forms. And if a rod is arm thick you really have to beat it. Sometimes iron was cold driven on these to make it stronger. This will destroy even the best anvils. So they are purposely made from cheaper and softer material and replaced if needed. They are build to be destroyed if you will.
@gulfcoastacrscrapper65232 жыл бұрын
I love old iron tool's and what a collections. I just saved Wilton Bullet vise from scrapyard.
@jmwarden15 жыл бұрын
That is a mind-blowing collection of old iron wow!
@Betruul5 жыл бұрын
this is Neat and all, but sheesh, I feel like you're the reason its so hard to find decent anvils anymore. you've already bought them.
@Sambomoses Жыл бұрын
I know it just sicks I spend Two yrs looking for a good anvil I could just use to blacksmith around my house 100 lb or so is ideal so I can take it with me..but dad gum man I know it's his passion but damn mam I just need one good one and not pay 1500$ for a 125 lb anvil
@bobbyhaynes5116 Жыл бұрын
With you both there, I am just getting into blacksmithing, the price of a good anvil is daunting to someone with limited funds. I see all those anvils lined up and drool.
@dreoneful4 жыл бұрын
I can watch this all day
@genkidama73854 жыл бұрын
I WATCH THIS ALL DAY
@ravenbarsrepairs55945 жыл бұрын
I'll say you'll never regret a Starrett vise. Grew up using one and thought it was just average until I used others and realized how spoiled I'd been.
@randynewtonsr96595 жыл бұрын
Wowwwww, I think Mr Alexander has enough projects to last him at least a hundred years!!👍👍
@jamiebuckley17695 жыл бұрын
400 years lol.
@terryschera56844 жыл бұрын
These anvils reminded of my childhood. My grandfather Pa would load up a wheelbarrow with two anvils a shovel and a spirit level. Also a can of black gun powder and some cannon fuse. We would go way out in the back yard and bury one with the base facing up. It had about a 2" diameter hole that was about 6" deep. There was a groove ground in it from the hole to the side of the anvil to place a cannon fuse. He would level the anvil with a slight cant away from the house. The next thing he would do was poke the cannon fuse in the hole and then fill it up with black powder. Then he would place the second anvil directly on top of the first one. We would light the fuse and then run far. He called it shooting anvils. The top one would reach an altitude of about 250 feet before returning to ground. The shovel was so you could dig it out of the ground after impact. Growing up in Miami Florida was fun back in the 50's! Have you ever heard of shooting anvils in your neck of the woods?
@aceystar14784 жыл бұрын
Its been done for hundreds of years. Supposedly also in colonial times. Essential craftsmen on KZbin does it. Ive not been lucky enough to see it myself but i may in the next couple years
@josephmagedanz40705 жыл бұрын
Who knew? What a collection! Thanks for sharing, Adam.
@Rocketninja2005 жыл бұрын
I've been trying to buy an old anvil for two years and can't find one. This guy has more than a WW2 scrapyard!
@Grillzange13 жыл бұрын
Nice to see an Ajax 3 Powerhammer in the US I wonder who dragged it over the big pond. Here in Austria we have them in almost every village workshop. The ram weight is 100 kg and those are very enduring and well made machines. Side note the Ajax 4 has a ram weight of almost 250 kg, a beast of a machine.
@rodhenry48625 жыл бұрын
Awesome video, I sure was impressed with some of the really strange anvils machinery and vises! I have 2 old anviles and one is a reed anvil awesome stuff! Thanks for sharing Adam!
@jamesbrewer30205 жыл бұрын
Wow you did it again. Another great video, thanks for bringing all along with you and now there is part two.
@smitherszx75 жыл бұрын
Saw at least 6 items I would love to have in my shop. Awesome video. That man's collection is incredible
@geraldschilli88702 жыл бұрын
I think I died & went to heaven. Your collection is incredible.
@fasousa47985 жыл бұрын
21:20 "Some 500 anvils...but I have way more vises". Vices are things hard to keep under control...
@richyearle0073 жыл бұрын
WOW....Quite incredible .To even own Richard Postmans collection of anvils is super impressive.That small 10lb Hay Budden would probably fetch more than the 680lb Peter Wright.Thanks for sharing the tour of Andrew's shop..Very cool.
@neillsmart2135 жыл бұрын
To quote Keith Rucker - "it's a disease" :)
@andrewstoll45485 жыл бұрын
The really cool thing about a collection like thy his. A: nothing will break easily. B: good luck trying to steal something.
@genkidama73854 жыл бұрын
my god this place is insane, all these mini machines so cute.
@ItsAlwaysRusty5 жыл бұрын
This is why no one can find a good anvil for a good price. This guy has all of them. A nice collection for sure..
@corydriver76343 жыл бұрын
Can’t even fathom the weight in that anvil room. Very cool collection .
@mxcollin955 жыл бұрын
Man this was an awesome video! So cool to get a history lesson seeing these OLD machines and how they worked. Cool to think about how these machines made long long before today’s guiding theory of “planned obsolescence” where shit is designed to break in five years. Amazing to think with a little sanding, cleaning and lube most of this stuff would come right back to life. I doubt people are going to be collecting Harbor Freight machine tools in 120 years.
@dragman3775 жыл бұрын
I would go crazy in that place. Thanks for posting.
@jerrycoleman26105 жыл бұрын
Adam, THIS is “EYE “ candy to the Maximum level thanks so much for sharing.!.!.!.
@laszlototh59565 жыл бұрын
Wow that was surprising to see the Ajax-Rába hammer was actually made in Hungary (in Győr city probably). Imagine the overseas shipping cost!
@roberttorok52345 жыл бұрын
A jót mindenhova el kell vinni. A good thing has to be taken everywhere.
@BillyG8695 жыл бұрын
I went to High School and was was in Vocational Machine Shop where I went 4 periods a day. We had a huge planer, 48” wide, bed was about 15-20’ long. When we operated it that thing went soaring back and forth like a monster.
@ruperthartop72025 жыл бұрын
What a great video. Thanks Adam and Andrew
@Xlaxsauce5 жыл бұрын
We are still taught in school how to do everything by hand. Its the FEA thats the new way to reaffirm equations or unkown super complex things. Though, most of what we do is standardized, so we could speed thru designs though we have to confirm that they are designed and built to all safety standards
@betterbackwards27012 жыл бұрын
Amazing tour Adam. Andrew is a pure geek for all the right reasons. Fantastic part 1.
@suzylarry15 жыл бұрын
beautiful old stuff ! Oh if they could tell their story's , Wow !
@davidhall17792 жыл бұрын
Wow, talk about a field of dreams. interesting you went to an anvil on his shelf marked from Boyds Mill, my Boyd ancestors had a number of mills, one in Tenn, the old homestead is still there.
@jeffjohns21895 жыл бұрын
I suggest attending AA (Anvils Anonymous)
@toddbertram65562 жыл бұрын
Some cool tooling my friend. I love to find old tooling and machines that helped make this country. My old WWII Sheldon lathe is still doing its job.
@russelljohnson6243 Жыл бұрын
Two experts shootin' the breeze, fun to watch!
@brianfalls58942 жыл бұрын
Well Adam, I think if your friend there ever decided to sell off his entire stock there then I think he would be a very rich man. There's a whole lot of money tied up in all that steel. WOW!!!
@louscott89985 жыл бұрын
DAMN!!! I I've been sitting at my desk, mumbling expletives and shaking my head 15mins after the video ended. Thank you so much for taking all of us along with you to Mr. Alexander's shop. I have a 185lb. Prentiss vise that's in great shape that I love to use for just general work and I have my favorite vise being a Starrett 924 1/2in great shape. I hope that Andrew does make a Museum or something to where people who appreciate can go physically see Andrew's amazing collection! Time for PART 2. I hope I can survive 32:05 of screaming out expletives and pissing off my neighbors. Hey Adam, if I end up in jail tonight because of my envious outbursts would you mind bailing me out if I gave you a call??
@jimsvideos72015 жыл бұрын
Balls to the wall comes from the piston-engine aircraft engines; the throttle levers have ball ends so you can tell them apart by feel from the prop and mixture levers. To put push them all the way forward - toward the firewall - is the basis of the expression. Steam engines did spawn the phrase "to knock the balls off the governor" meaning to make something work much faster than it was meant to, even if it meant its destruction.
@richmonsmith93085 жыл бұрын
Thank god someone else caught this!!! When people use expressions without knowing what they mean really yurks my chain! You sir I'm sure a great human! Bravo!
@xenonram5 жыл бұрын
@@richmonsmith9308 knowing what an expression means is completely different than knowing its etymology. The fact is, we truly don't know where the saying came from. _Balls to the wall_ means going as fast as possible (the meaning of the saying) and you can certainly know what it means without knowing the etymology. I'll bet you use sayings everyday without knowing the etymology. Maybe it came from pilots, maybe from steam engineers. Maybe "balls out" came from steam engineers, maybe "balls to the wall" came from pilots.
@rldoyle57055 жыл бұрын
Now i know why I cant find any anvils to buy
@kyeterrance62883 жыл бұрын
Instablaster...
@stevebachmann93485 жыл бұрын
Andrew must have one heck of a floor in that place.... think about the weight of all that iron in small areas!! WOW
@garyc54835 жыл бұрын
Excellent. I just love iron collections no matter what they are. Thanks for sharing this fabulous shop. regards from the UK
@laurier33485 жыл бұрын
OMG, his collection is amazing, Bloody interesting, thanks for showing.
@chrismate28055 жыл бұрын
Awsome collection, at 09:23 I buy old small drillpresses with artitic shapes if I see one and restore them, and man I like the 2nd one. This just illustrate how artistic all these old stuff is, always a pleasure on the eyes.
@jamiebuckley17695 жыл бұрын
wow that is one amazing collection that fella has---- a few bucks involved there. thx 4 sharing that footage adam that was super kooooollll.
@fleam1015 жыл бұрын
informative AND enjoyable. thx Abom!
@hopper15 жыл бұрын
The Stark lathes weren't really aimed at hobbyists. They were plain turning, precision lathes (mostly) and were quite revolutionary. They were used a lot in industry and there were all sorts of attachments and options available. I have an old No.4 and it pops up in my vids every now and again if you want to see one in operation.
@stevenrogge72785 жыл бұрын
What a beautiful collection.
@wesleyakachino5 жыл бұрын
Dude, Andrew, I'm sorry to have to be the one to tell you this, especially in Aboms comments but bro, YOUR THE MAN so cool, great vid Adam and Andrew!
@erik618015 жыл бұрын
imagine how much life energy that was expent on all those then to have them all in one room.. wow
@tylergordon6965 жыл бұрын
So he is the reason I can never find a decent used vice, be bought them all
@putteslaintxtbks51665 жыл бұрын
Ain't that the truth !!
@putteslaintxtbks51665 жыл бұрын
And why its so hard to find a good used anvil too!
@Abom795 жыл бұрын
Nah, Millions of anvils in this country.
@smithjones19065 жыл бұрын
That's a hell of a collection. I'm eager to see the vice pedestal you come up with.
@TomokosEnterprize5 жыл бұрын
Great visit Adam. Many thanks.
@timzaayer17135 жыл бұрын
Just WOW!
@manfredschmalbach90234 жыл бұрын
A classic hoarder in it's natural habitat 😂
@user9900775 жыл бұрын
That appears to be a commercial building he is in. It looks like the engineer's worst case analysis of floor loading was met with all those anvils laid out in that room....
@jeffren705 жыл бұрын
When you build that vise stand, you should put an air chamber under the base so you can hover it over the floor with compressed air like a hovercraft. just an idea.
@BPantherPink5 жыл бұрын
WOW... I wish I was like you two guys... COMBINED !!! That too at your age !!
@altonriggs23525 жыл бұрын
WOW!!!!JUST WOW!!!!
@carlthor915 жыл бұрын
So that is where my hammer ended up!
@stansbruv31692 жыл бұрын
Thank you for sharing these tools and information!
@uncleblack73224 жыл бұрын
The only house on Earth that will never blow away...
@manueldasilva87944 жыл бұрын
Well at least we know all these old machineries are been well kept by someone who really appreciates them
@shadowdog5002 жыл бұрын
I’m more impressed with those shelves! Never thought I’d ever see a shelf that can hold 48 anvils!
@JustinTopp5 жыл бұрын
Man I really wish I could get one of them anvils. They are meant for use not to collect dust. I can get keeping some but that is too many. :(
@manfredschmalbach90234 жыл бұрын
Deindustrialized U.S. usually sells off things like those to China, so it's quite extraordinary to keep 'em at all and display the lot, too.
@ORflycaster4 жыл бұрын
@@manfredschmalbach9023 Agreed.
@SHAD0WZOMBIE3 жыл бұрын
Everyone seems to have come to a unanimous agreement that this guy has a big part to play in the difficulty of finding ANY old anvils. And when u bidding on ebay u know this guy watching that same anvil an u never gonna get it least for a reasonable price..
@ericcommarato77275 жыл бұрын
The Essential Craftsman would go nuts here!
@perevulok2 жыл бұрын
My God, how I wish I could any of these animals.
@josepimann73845 жыл бұрын
This is an awesome thing to watch. Soon much iron. Very nice.
@tced28585 жыл бұрын
Adam, the last place i work, they had one of those cones on that page in that book, sitting in a dark corner in the shop...I came back from vacation and noticed it was gone, I inquired about it and they threw it in the scrap dumpster...i could still cry over it...
@jerrylong3815 жыл бұрын
And here I am looking all over Missouri for a large vice.
@TheOtherBill5 жыл бұрын
Same in northern New England. Either a collector got it or even worse an antique dealer selling it as a decoration. I can't afford a new one of a decent size.
@m-s-a-g5 жыл бұрын
Wow cool man👍👍👍👍👍
@justinmills80845 жыл бұрын
Thanks for sharing the tour.
@greggoff49905 жыл бұрын
Didn’t watch it yet but I know it’s going to be awesome
@thondupandrugtsang5 жыл бұрын
He looks like the actor Steven Og. This is an incredible collection.
@roberttorok52345 жыл бұрын
Gyönyarű és nagy gyűjtemény. Gratulálok. A Rába kalapács gépnek ahogy látom ez már nem az eredeti meghajtása. Eredetileg lapos szíjjal hajtották transzmissziós tengelyről. Ez egy 1950 évekbeli példány lehet. A1960 években már Miskolcon a DIGÉP-gyárban gyártották lemez vázzal. DRK60 60kg medve tömeggel és DRK30 30kg medve tömeggel. Magyarországon még rengeteg működi belőlük. Beautiful and great collection. Congratulations. The Rába hammer machine as I see it is not the original drive. Originally loaded with a flat belt from the transmission shaft. This could be a 1950s specimen. In the 1960s, Miskolc was manufactured at the DIGÉP factory with a plate frame. DRK60 with 60kg bear weight and DRK30 30kg bear weight. There are still plenty of work in Hungary.
@marcuscicero9587 Жыл бұрын
all beautiful stuff
@mikemassey14052 жыл бұрын
Blew me away , love it.
@Freeman-Dl70 Жыл бұрын
Blacksmith Will Stelter would be amazed at the collection of vices. I'm amazed at the entire collection. You'll find the largest working anvil in Harlan County Kentucky. A Blacksmith built it, it weighs an amazing 6,200 pounds.
@ROBRENZ5 жыл бұрын
Enjoyed Adam! ATB, Robin
@rbarnes40815 жыл бұрын
What a shame that the American pride, workmanship, and ingenuity of the 19th century (and early 20th century) has all but disappeared in modern times.
@Eisen_Jaeger5 жыл бұрын
Omg that collection..
@rockmanharbinger36224 жыл бұрын
GREAT GREAT GREAT SHOP . TIME TRAVELERS. THOSE BOOKS ARE PRICELESS..ROCKMAÑ😎.