Fire, Epoxy, and Free Wood

Burnt wood and epoxy desk adventure...
Pre-Order the Marking Knife:
blacktailstudio.myshopify.com...
My Epoxy Workshop [w Bonuses]: www.blacktailstudio.com/the-e...
Original "fire table" video: • Fire + Epoxy
eBay link: www.blacktailstudio.com/ebay-...
Kutzall Disc, Fine - bit.ly/3LDV9RN
Kutzall Disc, Very Coarse - bit.ly/3npMZoo
Kutzall Extreme Disc, Coarse - bit.ly/3AXpdmD
Wood slabs: gobywalnut.com
Items used in this video:
New Blacktail n3 Nano: n3nano.com/
Deep Pour Epoxy: www.blacktailstudio.com/deep-...
New Zealand table legs: careyhablous.wixsite.com/tabl...
Track Saw (smaller): www.blacktailstudio.com/track...
Miter Saw Hold Down: www.blacktailstudio.com/miter...
Battery Brad Nailer: www.blacktailstudio.com/batte...
Rotex 150 Sander: www.blacktailstudio.com/rotex...
Buffing Compound: www.blacktailstudio.com/buffi...
Dewalt Buffer: www.blacktailstudio.com/dewal...
Buffing Pad Spur: www.blacktailstudio.com/buffi...
Light Bar: www.blacktailstudio.com/light...
Katz Moses Stop Block: www.blacktailstudio.com/katz-...
Oliver Planer: www.blacktailstudio.com/olive...
Contact Cement: www.blacktailstudio.com/conta...
Respirator helmet: www.blacktailstudio.com/power...
Scraper: www.blacktailstudio.com/scraper
Threaded Inserts: www.blacktailstudio.com/threa...
Air scrubber: www.blacktailstudio.com/air-s...
00:00 Introduction
00:27 I really know my wood
01:43 How I'm gonna do it
02:25 Cool tools
03:28 Wood burning
04:34 Sealing the char
06:25 First problem
08:06 Burnt wood trick
09:32 Epoxy leak (a bad one)
12:27 Removing the "form" and planing
13:27 Back at my shop
14:34 Touch ups
16:37 So much honesty
18:53 Table leg attachment
19:37 DIY paint booth
20:51 First coat reveal
22:43 Rocky montage of spraying
24:04 Buffing water based poly
25:29 Legit disaster
26:44 n3 nano top coat
27:32 Final reveal

[@BlacktailStudio]

Thank you all so much for the support! Here's a link to the new marking knife if you're interested: blacktailstudio.myshopify.com/pages/marking-knife

[@alexsnow3319]

More Why don't you build the form, then go back over all the seams and apply another layer? It's funny in a way, but you gotta learn at some point? Also, try setting up a spray booth in an active blacksmith and metal shop, lol. With a jerk employee throwing 1" chunks of steel through the plastic sheeting. Not a bad job on the setup, Cam. I would suggest plastic over fiber.

[@eedesign878]

Put your epoxy under vacuum before pouring, you will get rid of the air trapped inside during mixing the epoxy. Way less bubbles, like 99,999% less. I dont know if it is problem with wood but with carbon fiber it helps a lot.

[@joshmajor8662]

I'm a blacksmith in Kentucky, what forge is making these???

[@puritan7473]

I have to say, I didn't appreciate the camera people comment - I am a camera person, and I have NEVER left a negative comment! - we're not all bad!

[@WaffleStaffel]

Maybe a needle descaler for the bubbles?

[@connorb057]

Automotive painting tip: spray the ground with water before you start painting. It encapsulates any dust or debris on the ground and keeps it from spraying up onto the surface.

[@davey12678]

I was just about to ask if that's part of the spraying process.

[@Novice_Mentality]

Car guy here....beat me to it lol. Seen plenty of videos where spraying down the floor in a DIY paint booth helps reduce those contaminants. Doesn't completely get rid of them, but the difference is significant.

[@ItsDobbs]

I was about to comment this same thing!

[@Flornmonk]

This guy paints.

[@Omni11B]

Also seal the tarps together and to the floor. That air extractor is just pulling shit from the shop in through the gaps. (FYI I'm not an automotive guy, just a guy with a fraction of your shop.)

[@discodubber85]

Ok. I’ve done the DIY paint booth. I can give you a few pointers. 1) You need to use PLASTIC drop cloth. Fabric drop cloth has loose fibers that can blow around. 2) You need to put the drop cloth at top, sides, and bottom, and they need to be taped together to seal the area. Also, tape around your ventilation unit. 3) Your “doorway” needs to be double flapped. By that, I mean that an overlap isn’t enough. Where the curtain parts to allow you access, you need another drop cloth over the gap to prevent the gap from opening up and letting dust in. 4) You need more slack on your air hose than you actually need because you need to tape it down and seal the drop cloth around it. 5) You should be wearing booties over your shoes. They’re not just for protecting your shoes, they’re also to keep any dust and crud from your shoes from getting blown around. Basically, be as OCD as possible when it comes to prepping the area. Maybe bring your wife out to check the area? Lol

[@_iphern]

Another tip: get the floor wet before spraying, prevents any dust/debris from the floor getting blown/sucked up.

[@mxerable]

Another tip from someone who did this kind of spray booth in their garage: Lay out some Newspaper on the floor and wet it down with a watering can, It prevents dust from getting airborne and paint sticking to the floor.

[@ericlee8231]

Well said

[@RickSchiver]

Was going to suggest this but you beat me to it.

[@Kevlar187]

@@_iphern That's what I was thinking too when watching. Def. need to spray down the floor first.

[@jtw-r]

Shouts out to Scott for the honesty! And shouts out to Cam for being able to accept critical feedback without getting puffy chested

[@l3eaver]

Use “flexseal” for your leaks when they appear

[@smokintoes]

This is a perfect example of "trusting the process." That ending is IMMACULATE

[@TraceyOfficial]

I love how Scott feels like a Friend, not just a guy you've hired but someone who adds to the show.

[@rittethetube]

Yeah, I wasn't sure how a camera person would fit in. But Scott definitely adds to the videos!

[@cineblazer]

Agreed, Scott is awesome

[@laurencapwell180]

Engineer's painting tip: After you set up your booth, run a hepa air filter inside the booth for several hours to remove dust and debris from the air. Keep it running while the piece is drying to keep the air as clean as possible. Also, if proper ventilation allows use plastic drop cloths for the walls instead of cloth. Cloth gives off lint and dust particles, but plastic is much cleaner and won't contaminate the space. Make sure the floor is clean (wet helps) and wear a fresh clean suit. If your booth is sealed from floor to ceiling, then most contamination will come from your clothing. Also make sure the ceiling of your booth is closed so that contamination can't float in from outside. Once your booth is set up and clean, make sure you run the air filter for a few hours before you start.

[@shen1801]

Mix that with water on the floor, and you wont kick up debris while you are coating it as well. This should be more than enough for a home shop.

[@tobetinkering]

@@shen1801 I painted in my uncles garage and wetted down the walls also and got a decent finish

[@-_-naab-_-]

@@shen1801 good comment you had same toughts as me!

[@un7ucky]

he also has no where for the air to come in except from the dusty ceiling, its not helping

[@user-yg5mi9tt2u]

If you haven’t figured out the dust problem yet from your DIY spray booth, it could be because you were using organic material drop cloths which have minuscule fibers. When the drop cloths are moved or bumped, they will drop fibers in the air and end up in your work. Could consider using plastic or spray your drop cloths with resin or another substance, which could bind all the small fibers, but still allow flexibility in the cloth. Just a thought, not sure I’m right. Also, your intake side of your booth if opening is at the top, your particulate matter is falling from the ceiling and ending on your work while being sucked through your vent at the bottom. Sealing your booth at the top and adding an additional filter at the bottom would create a lower entry point and exit point for your air intake and output and may keep particulate matter towards the bottom of your booth.

[@agracer1000]

First thing I thought as well, seal the top!

[@argentimaginationjewlery6020]

I love that you show the mistakes when making your projects. The best lessons come from mistakes. Mistakes always give a person a new perspective, changing how to use techniques for different projects.

[@matthewrichardson148]

Very true he could edit out any mistakes but the way he does it is great

[@Zercell]

It would be interesting to one day see a table where you take advantage of the bubbles from the epoxy and turn them into a feature

[@jimmykelly5928]

Yo that's a great idea. I saw an epoxy table that had an accidental bubbling issue that ended up looking almost cool, but doing it on purpose would be super dope.

[@Danielism]

Yeah induced bubbles, then fill the bubbles with another colour. And then seal over them. Would be a cool experiment.

[@wiseguy5313]

Waterfall style table into bubbles…???

[@Zercell]

Perhaps taking advantage of how the bubbles can often look like they're glowing when lighted the right way

[@frednoble3547]

Or lots of levels of surface bubbles in very thin lifts could look like the epoxy is fizzing!

[@slimdout]

From a fellow woodworker who was an auto body guy in a past life... canvas is fabric and holds dust and the like, bringing it into your booth. Plastic makes for a cleaner booth. Also, if you wet the floor a bit, it will hold down a lot of dust and light debris that you're finding in your finish. Makes the early and in between stages a lot easier on you. 🤘 Also, more. love these outside-the-box builds. Keep rockin on, man.

[@nickzeigler3134]

100% correct. Canvas for gust control, 5mil+ plastic sheeting on the inside for dust control. Have a filter on the passive INLET side to the 'booth' and keep the outlet(s) at or below floor level. Clean everything, then mist all surfaces with water and leave a decent amount on the floor. Bring in the slab, tack it clean, wipe down with fast drying spirits of some kind, then spray and pray. Sand, repeat. @Blacktail Studio - inflatable paintbooths are a thing! I also like using the cheap carports from Harbor Freight.

[@josiespreitzer1690]

Would spraying the canvas walls with water (as well as the floor) keep dust from getting on the project surface?

[@truckguy6.7]

You were also brushing up against the canvas which was dislodging the dust particles.

[@bv1726]

Ditto Real Fehlany's remarks. I helped a friend paint a home-built plane a few years back and we created a 'plastic' lined spray booth. We washed down the plastic with a hose and dampened the floor before spraying. We also had an air supply setup similar to what Marc T. described above. It worked really well and the plane won some prizes for its finish at aviation fly-in events.

[@VelebitMountainMan]

I work in construction and build hospitals. Part of what we do is build infection control so dust doesn't escape the site and infect patients. Never use drop clothes, they are filled with stuff. The best solution for you is Zip Poles, visqueen and tape. Add a zipper or two for access. Install some plywood over the joists, paint it so it seals up the pores and can be taped nicely. Install a negative air machine on one side and another on the opposite side. One machine will run negative and the other positive so you aren't sucking dust from the exterior. Tape all your joints including floor, ceiling and walls. You can adjust the negative air to compensate for the spray gun. Pretty clean and easy solution, whole set up is about $1,500. All the cost is in the negative air machines and the filters.

[@mattrowland8425]

The small accident on your first table is what made it so good. This one looks like it has a big black line through the middle of it. You should make it more organic with more “accidents“ more organic transitions from black to natural wood. Amazing work ethic.👏

[@user-pt5nm2hx9p]

I hate tubers that stand in front of the camera and talk about what they are going to be doing and showing a fire for ever. That’s the reason that I really like Blacktail, you talk in the background while showing what you’re doing! Excellent, keep them coming!!

[@gordy15604]

I will never make big resin projects or slab furniture, but your understated humor still makes this one of my very favorite channels.

[@frankmurphy5]

Scott's been a great addition to the shop. It looks like you guys get along really well. That's the most important thing 🙂

[@tylerrydell]

Except the “There’s no such thing as good bubbles, Scott” moment. Felt bad for Scott there.

[@aaroncook8890]

Love Scott!

[@joewwilliams]

The real epoxy tables are the friends we made along the way!

[@BeingMan11]

I am a certified fan of this channel. A major that I worked with in the Army once said to me. "I know that you make mistakes but I just can't catch you at them." To which I replied "Sir it's not about making mistakes, it knowing how to fix them." That principle is what keeps me coming back for more of BlacktailStudio projects. You make mistakes but watching you fix them is as informative as watching you start the project. It is so enjoyable to watch your programing, you don't talk so fast that I have to hit rewind 2 or 3 times and you really do create some outstanding pieces. Look forward to seeing more. Thanks.

[@josecardoso297]

I really love the burned wood look table videos. Especially the dragons breath one.

[@sams6090]

A real good idea for doing a sterile work place area/spray booth is to isolate it like you did and then use a water sprayer with a fine mist to knock down any floating dust. Also don't use a fabric cloth to isolate things as every single time you touch it, a little bit of the fabric will break off and fall down onto your surface. Use a plastic sheet or at the least try treating your fabric first to strengthen it and make sure to never ever touch any of the walls or disturb the sheeting. Also don't have a blower going inside of the area as it'll still kick dust up and around. Also it might seem excessive but you can try doing a secondary layer of sheeting/fabric with a space between the two layers large enough for you to walk through. That way it limits any external air from entering the clean space when you walk between them through the void.

[@BlacktailStudio]

I appreciate that. I started doing the water treatment. Helped some. But I think you're right on the fabric wall part. Need plastic instead

[@dominicdiclemente8877]

@@BlacktailStudio Use the thick plastic drop sheets they sell at all big box stores, 1 sheet per wall and DON'T forget to cover the floor.

[@jonahthebear]

If you get the opportunity to work with three nearly identical slabs, I think it’d be really cool to see a “table in a day, table in a week, table in a month” video where you show the different levels of dedication to proper finish and polish and everything.

[@androswolf]

I think the only problem with this approach might be wether there is suitable resin available that cures good enough in less then day and still gives him enough time to do the other steps needed to finish the table

[@salvesenm]

Love this idea

[@davidmenezes8112]

Can only does perfect level haha

[@joseppedaia3673]

@@androswolf might be "table in a day of work"

[@patrom8164]

That's actually the best idea for this channel. Since he puts so much work into finish.

[@RazorStrap]

Hose down inside the spay booth (tarps, top, floor) to rid the dust. Keep the walls and floor damp so dust can't be kicked up into the air. Make sure the ventilator filtration is working well. Maybe duct outside are to the ventilator. The shop air is probably pretty dusty. Don't want to put that into the paint booth.

[@dhebert111]

More. Definitely more! These are the only woodworking channel I'll watch every second of, repeatedly.... Definitely inspirational.

[@Zercell]

It's always impressive how you persevere and continue through errors and accidents to create something stunning

[@sshep7119]

If you intend to do this DIY spray booth again, look into buying a small wedding tent with all the wall panels. The fabric drop cloth do nothing but release the kraken when it comes to finish work. The PVC wedding tents don't do that, plus they have a canopy which is huge as a significant amount of debris is dislodged from the ceiling from the airflow of the paint gun. I saw another commenter mentioned wetting down the ground (you would be amazed at how much dust gets kicked up). Having a dedicated spray hose, or get a hose cover that is single use. The spray gun is clean, the painter suit is clean, but everyone forgets the damn hose for some reason. If you really want to get obnoxious with the prep and clean you can hook up a negative and positive to your suit and your part. If you think your suit is up to the challenge, try taking a really clean part and rubbing it on your suit. Wait until you see how much debris collects on the suit just from static. If you must stick with the drop cloths, buy a garden pump sprayer and fill it with water, right before you do the final tack spray the drop cloths to the point they are wet. Keep at it, there are so many lessons that are learned only through trial by combat.

[@TheUnknownDutchman]

Yacht painting tip: spray the curtains with a sticky material. Use a filtered airpump to create overpressure. Use a filter to release the overpressure.

[@JerodHughes]

The burn finish totally kicks ass I'd be surprised if there isn't a high demand for them.

[@windraizou]

I love the rapport you and Scott have. And that there's such good communication between you two, it's refreshing.

[@seanliv]

Having been to the giant redwood forests and seen the hundreds of years worth of forest fire damage on some of these beautiful trees, I think the burned redwood look tells such a rich story about the life cycle of a redwood. And on top of that, you made it look stunning! The black textured burned areas contrast beautifully with the smooth, rich red/ brown of the surfaced areas. Well done, sir 👏

[@BlacktailStudio]

I was sure this comment was going to be negative when I started reading. Glad I was wrong! Thanks Sean, I appreciate it

[@perniciouspete4986]

Doesn't fire burn from the outside? The inner part of the wood is burned instead of the outside.

[@AdaSoto]

​@@perniciouspete4986 Redwood bark is fire resistant. When fires do get to them it's not uncommon for the fire to work its way between where the root/tree transition is then slowly smolder, hollowing out the tree. There were trees where I would camp as a kid that were alive and healthy but you could climb through a burnt crack into the trunk and see the charing.

[@leonvigil2045]

Man that table came out awesome! I wouldn't pay attention to half of these people on here. They probably have never attempted anything in their life. Keep up the good work. Your work just inspired my ideas.

[@TheSassChan]

I know this video is 3 mo old, sorry for the delayed comment. I’m not an automotive painter, but do specialize in staining and finishing raw wood among other things. I have a couple little ideas that may help. The first thing I noticed with your set up was the open top so anything near the rafters in your shop was free to come visit your wet piece. Secondly, the drop cloths used are fabric, which can have hairs and lint itself. Even the moving in and out of the booth could have been disturbing those. And of course anything that made it in while the curtain was open or on your feet or statically attracted to your “paint jammies.”As I like to call them. My recommendation for at home paint booths are actually really easy to get. They have plastic ones now that are sealed all sides and have a zippered entrance. I’ve seen both ones with a frame you can set up and ones that attach to the ceiling to hold open. I’ve seen them at Home Depot and Lowe’s. I’d be willing to wager they are available at some paint supply stores most places. I hope that helps with the dust and hairs a bit. Thank you for making these beautiful projects. You’ve inspired me to add slab projects to my list of goals. I even have a few giant beautiful knotty maple logs that I’ll be having milled and kiln dried before long.

[@RangeGleasry]

As a person who is indifferent to this table, what I love the most about this video is how you take every challenge and every error as an opportunity to learn and perfect your craft. At one point you reflect “that’s part of it I guess” and that just really resonated with me because that’s the attitude everyone should have towards every unexpected difficulty ever. I feel inspired to apply that same calm, perseverance and humility to my own life.

[@ginonajiola4326]

You will become clever through your mistakes. -German proverb

[@Unc_Talks]

More! Id love to see a geometric pattern since you're perfecting only burning certain areas. Like, squares with a charred outline, or reverse.

[@BogdanManciu]

I'm thinking rombus. Maybe even have inlays to frame the burned region. Like those checkered or 3d cutting boards, but with burned rombus and thin dark inlays.

[@frednoble3547]

Ooooh, mix and match the charring and patchwork techniques!!

[@3XJ-DreamWoods]

I love how you took the wind out of the sails of the haters, that we’re gonna point out how dangerous this is

[@ManyGhosts]

More, more more. I absolutely love these burnt, odd shape slab tables. Wasn't nuts about the legs - I feel like with the way they stick out past the edge of the table I'd be tripping over them/bumping into them all the time and they looked a bit too... fancy. You said this in the standing desk video and I totally agree - unusual tables should have simple/minimalist accessories. And seriously, Cam, your comments totally slay me. Hilarious. 😅

[@danaeroberts684]

More of those tables, please. I love the contrast between the burned area and redwood grain.

[@gullielli]

I pretty much never comment on KZbin vids but this time I had to let you know that I thought this piece of work was excellent. I’d love to see more projects like these. Really enjoyed the back and forth discussions between you and Scott.

[@Nunya58294]

I highly doubt you've "never" commented on KZbin. You're required to remove this comment now.

[@maoriwarrior9908]

MORE........ the shape, size and finish is pure art.... you have such a gift.... I canwatch the videos all day.... Please keep making them. Kind regards Gabriel

[@Skeld1ng]

Watched one of your table build videos just because it looked interesting…that was 2 days ago ..I’ve sat on the sofa and watched all your videos now I think ..enjoyed them all and I really like listening to your commentary,wish I still had my workshop to try building a small table ..also wish I hadn’t damaged my back lifting heavy stuff for years and had to have surgery a couple of times over last few years….look after your back bud ..just because you can lift those slabs of wood doesn’t mean you should be ,I promise you ,you do not want to damage your back !!

[@Fabiozon]

I love the look!! I think a gradual, more organic fade from the burnt to the raw wood would've looked better. Kind of like a "flame kissed" vibe.

[@MV-Audio]

More thank’s! Multitasker tip: Spray the entire surroundings with water before you start painting, the floor should preferably be wet and the walls slightly damp at least. As long as there is no water dripping from the roof, you cannot water too much.

[@AkaiKnight]

that makes so much frikin sense. Also, wouldn't plastic drapes be preferable to fiber?

[@clericalthoughts]

I would LOVE a table from a series like this!!!

[@angelahighwolf]

I admire you for never giving up. People don’t understand that is how you learn tricks other people don’t know.

[@angiegoodson3652]

I absolutely LOVE how your table turned out. I also love that you aren't afraid to bare your soul in these videos. Kudos to Scott for keeping it honest too.

[@charlesfrazier3578]

I would like more of this type of table design ! I love the contrasting look of the burned wood and epoxy. I plan on trying my hand at it on a much smaller scale (bookcases, bookends and valet stands)!

[@123456bpb]

Not dangerous at all. You had control at all times and as a plus, you had a plan for unseen events. Keep up the good work. We all love it.

[@dianeluke1746]

More. I really like the charred look and how it accentuates the natural look of the wood surrounding. The wood grain that still pops through the char is my favorite part. The table is already at $11k so congrats Cam!

[@JaX0rton]

More. Definitely more. Loved how the table turned out. The charring in the center and natural red wood on the side looks great. Amazing job!

[@fuzzyelm1]

Really ? You liked that ugly piece of trash ? That thing looks ugly , compared to what it looked like from the beginning it looked better edited he touched it

[@girlscarf]

wow the contrast is awesome with the shiny black and the matte black edges

[@Steve14157]

I’m a painter and we often use the Zipwall system which would be perfect to make a pop-up spray booth for your application. Also the table looks awesome! Just another idea is maybe you can try it again with the redwood in the center and the burnt wood on the edges

[@HyperactiveNeuron]

More. Definitely a very cool project. I'm also a big fan of how you don't shy away from taking about and showing your mistakes and unhappy accidents. Listening to Scott's opinions is a super cool move too. I think it not only shows how you two have become honest friends which is a really big thing but how open you are to other people's ideas and your openness to trying something different.

[@sidewayskiwikick2899]

I love watching this channel, one of the few KZbins that’s no nonsense content. He doesn’t just make tables, he makes beautiful art.

[@markcollins457]

The burnt center section has a living organism appearance to it almost like a scene from Alien. This is a complement it is striking.

[@tylersanford1470]

More of this type of project!! I would love to see a burnt lava table with some notes of 3D red/orange to look like molten lava!

[@graememitchell6663]

Cam, this is really close to my favorite table you've ever done. It's extremely textured (if that makes sense) and the way the char goes natural in the middle is sweet AF. Amazing man. It's absolutely amazing.

[@jukrvv]

I would love to see a bit more of this style of table design. Maybe an inverted version of this with char around everywhere and unburnt wood trapped or flowing throughout the center. You could maybe even experiment with different untouched wood patterns like a cross in the middle. I would enjoy seeing a non live edge version of this table as well. Great work!

[@williammaxwell1919]

My thought too

[@eyflfla]

Oh! or like a starburst kind of shape.

[@Beechcomber96]

Mate, I think you’re a highly skilled, artistic and impressive woodworker/craftsman!! I’ve been a joiner/carpenter for 26 years now and I’m soooo amazed at your skill level!!!! Just wow!!! Keep up the good work and beautiful designs cause the world needs more of it!!!! RESPECT to your magic and skills, and thanks for putting it out there. ❤❤ P.S…… I’ve had a bit shipyard experience and when a ship is breached and has a leak the procedure is usually, timber props , rubber and wedges…Maybe when the epoxy leaks from the underside you could try a simple prop and some rubber, some of those silicone gloves could be used to fill in the uneven bit’s?????? Much love and respect to you!!!!!! ❤❤❤

[@emory442]

One of my favorite pieces you've done. I love how you keep it real

[@ZoliMusic]

More often than not, I enjoy your mess ups and - even more so - your recoveries. Thanks for the content and inspiration, Cam!

[@melissahatfield4773]

Dust tip. Dust is ALWAYS in the air. No matter how clean a house or booth is. My advice is to have a piece of 1” plywood larger than your project and have it hover about 1” above your project while it is drying to prevent dust and hair from getting into your finished epoxy. Remember that every time you enter the area you have your piece you are bringing dust and hair with you. I would love to see more projects like this I love the look of the burnt wood

[@shawnwalker-ir1qk]

I have been doing countertops and floors for a few years and that table looks absolutely fantastic

[@DS-ue6hg]

MORE!!! Love your work and overall presentation of your work, processes, and procedures. I have been binge watching your videos to catch up on your projects. Love the fact that you show the good, the bad, and the ugly! LOL Keep up the amazing work!!!

[@Zercell]

I was never sure about the burnt look but I have to admit that you do it really well and stylishly

[@BlacktailStudio]

Oh thanks man. I wasn't sure either

[@Zercell]

@@BlacktailStudio I definitely have to admit that I love the look of a black live edge

[@rickrochester8480]

More! You are the only You Tuber that I watch start to finish with all your videos. You do amazing work!

[@brentmcdaniel2355]

I painted for 20 years I believe the fibers and dust came from the drop cloths being so close to your table while spraying. Love the content!

[@markhollen8679]

More! That table looks awesome!

[@Kelligirl999]

More of these tables. I have been binge watching these videos since I really enjoy your honesty and sense of humor. Your work is amazing to watch come together.

[@marcodhaene]

More! It's always a good day when a new Blacktail Studio video comes out and this one didn't disappoint. I like that you try new stuff or approach at a different angle and don't shy away from showing mistakes. We all have them and it's part of the exploration and learning curve. Nice one 👍🏻

[@GardenGuy1943]

…..

[@cynthiasauer4025]

More! I might be one of the few females who regularly watches your channel but I love all of your work. I walked in on my husband watching one of your videos last summer and was fascinated, I’ve subscribed and watched all of them since. Your self deprecating humor absolutely kills me! I’m not in any way interested in being a woodworker, I just really find watching the entire process you go through so interesting! Thanks for being so genuine and keep up the great work! 😊

[@OverlordIcy]

Same. I don't/wouldn't mind working on a few small things, but I'm not really interested in doing it all, let alone often. I am however always VERY interested in learning new things, knowledge and skills such as these.

[@unaoconnor3628]

Likewise. Incredible dedication to his craft. 🇮🇪

[@juliebeans5000]

More! And really loving the different types of wood. Of course the walnut is lovely. But part of our fun is watching you solve new problems in a creative way.

[@lolcepcion5515]

Definitely more. Projects like these are so interesting and just keeps me coming back to your channel!

[@j.d.3680]

What i love about your videos is how you admit your own mistakes and give tips on how to avoid them next time, great work!

[@Rogers3712]

More of this stuff would be great. Also, continued kudos to Scott. I think the positioning change and the powder coating on the legs made a massive difference in the end product. Gorgeous table in the end.

[@BPBomber]

Lol Cam, it’s another work of art. It’s absolutely gorgeous. Don’t be so hard on yourself. I actually like seeing you screw up, it makes you human and I think also helps the rest of us to manage project frustrations. And it means your stretching yourself and growing your skills. I have found that growth is almost always uncomfortable but, in the end, almost always worth the temporary discomfort.

[@farhadamon8389]

More , excellent. As an old restorer and vinery and French polish skill I have you have taken it and better it. Great work.

[@bgross685]

I do believe that you have changed my opinion about burnt wood. That's a beautiful table. As always, your problem solving and commentary about said problem solving is impressive and entertaining

[@geraldmoore3686]

More please, this is beyond believable. You take woodworking to a totally new level. I love it.

[@eliwood2328]

I was honestly born and raised doing body work and paint work. The canvas curtains you got . You can keep them but cover it with plastic on the inside, clean new plastic. And if you have a garden hose handy not on full throttle but lightly spray down the plastic to wash any dust off of it and even spray the floor down a little bit to keep the dust down. And don't be afraid to put three colts on before you start standing it. Dust you can sand out chunks and specs of dirt you cannot. And your final coat you can always lightly san and polish it out. Good luck to you everything looks great so far.

[@paulcarter5181]

I couldn't nail two pieces of wood together, but I love watching people create their art. Great stuff. Plus, I'm originally from Portland so I gotta show my support.

[@pudniskool]

I love Scott's random input and comments, as well as the overall style of your videos. Thanks for keeping me entertained while I slack off at work! Also more of these tables are awesome, love the live edge burnt look!

[@gramof5396]

Cam, what I like about you videos is your humble attitude, telling the good results as well as the bad ones! A wonderful way to teach people watching this channel. If we had a redo button on life this is what I would have done for a career, however back in those days “young ladies” didn’t get those opportunities. I am retired enjoying you videos please keep them coming. ❤

[@user-hn5fb4hy8q]

I love that pom-pom hat don’t ever be intimidated by somebody else just keep using it

[@abhinavm5952]

some fancy restaurants have tables with typical brown wood finish on the sides, and have a channel down the middle with pebbles filling it. I absolutely love that style. But this table, is that style turned up to 100, especially with the gloss you've achieved and the burnt wood finish. Lovely. also, definetely MORE.

[@GodlyWarrior_]

Definitely MORE! I love seeing you push the creative boundaries. For me, this table just had a lot happening. The live edge was beautiful to see but in the end was too distracting. I’m looking forward to you exploring the “half burnt, half normal wood” concept though! Keep them coming.

[@Blackwater2.0]

As an automotive painter of 20 years and wanting to break away from the trade your work is a real eye opener as to how wide of an area my trade overlaps others. Keep up the fantastic work brother! Your whole garage spray set up did better than most shops in my area that have actual spray booth setups 😂 don't be too discouraged.

[@chrism5508]

So true, most people will spray and put out crap products because most people would never notice. It's a sad reality. You can get away with garbage work because unless you've worked it, most people don't even notice.

[@toastedt140]

​@chrism5508 If you buy any of this junk that's on you lol. I keep old saw blades and paint little sunsets on them and old ladies snap them up like they're hotcakes.

[@ronalger2184]

My wife absolutely loves it. She says make more of them and one day I will have one. Thank you

[@DSN0W39]

I love the burnt tables. With the black legs and edges. Its awesome.! I can only dream of ever owning one though.

[@almcrae3491]

More of these please. You said in this video that you didn't really like the fact that you could only see the wood grain in the burnt section of the original piece in direct sunlight but personally I think that it looks better than the effect in this new piece. High end furniture like you're doing needs that wow factor and I think that the original burnt table amplifies this. When people walk up to the table they're already blown away by the beauty and craftsmanship but then,as they walk around the light hits just right and all of a sudden the hidden gem of that burnt woodgrain hits them.

[@JoeBrinkman66]

That table, like most of your projects, is absolutely stunning. Love the contrast between the burnt wood and the raw wood.

[@sE-pn8ds]

More! Do a table that fades from full burnt on one end, to not burnt at all on the other!

[@kappagrapes]

More of these charred wood tables would be pretty fantastic!

[@-DooM.-]

More, This table looks phenomenal and the overall look of a natural char vs a painted or dyed black is amazing. I really enjoy the look of the transitions between the live edge and epoxy running through the center. I think you did a fantastic job.

[@northstardawg]

More! More of all of it! Your channel is the one I most look forward to updates on, and it's stuff like this - from the project itself, to your honesty about your "mistakes", to your humor that keeps me coming back every time!

[@radoris7112]

....do you know the truth? for you it seems dificult to embrace it.... please don't suggest overwise... ok? i guess this is the end for the fancyseekers.... like you....

[@michaeldiaz5641]

Excellent table!!! I love how there is depth under the epoxy revealing the burned wood peaks and valleys. I bet it looks even more incredible when shining a flashlight through the side of it at night?!

[@HavendaleBlvd80]

Table is a real beaut. I love how under certain lighting you can see the depth in color tones of the wood.

[@andersonbarbosa4405]

More of these tables PLEASE! They're amazing looking and watching you go through the process is both funny and satisfying. Perfectionists feel each other's pain!!!

[@fuzzyelm1]

You can’t be serious! That thing is ugliest trash ever it looked better before he touched it !

[@mangopies2260]

​@@fuzzyelm1Sometimes before you comment remember that no one cares how you feel when you say something negative like this so next time you wake up and think you want to make someone feel sad or disheartened just remember this. KEEP YOUR FEELINGS TO YOUR SELF.

[@fuzzyelm1]

@@mangopies2260 look it’s ugly ! If you think it’s not ugly then your stupid ! Simple facts ! Sorry I hurt your feelings! Didn’t know Ives’s dealing with a second grader !

[@andersonbarbosa4405]

​@@mangopies2260best reply ever! ❤

[@tibbers5211]

I love Scott! His input and your back and forth is so good and I feel like he really helps bring that soundboard into things, in a way that helps make the projects better? Not that you're not great already, but he's like an in-person audience, and the camera work is just 👌

[@allochthonplays2978]

More. I love this piece. Looks like a table made from a lightning-strike!

[@echoc7213]

More; the grain in the charred wood really popped, and it looks great! I love the contrast between the charred and uncharred redwood, with the charred live edges as well. Just saw the bidding is up to $11k! Congrats!

[@Koselill]

I think the thing I love the most about this channel is how everyone comes together in your comment section to help improve the craft. It's not about money, it's about passion and combining our knowledge to keep crafts alive. It's always so facinating when you meet an old person and they're a master at their craft and when you try to do it yourself it's SO DANG HARD. It really makes you appreciate all the hard work they put in and makes you wonder if they were always this good and how they got there. Well with this channel you don't have to wonder. You get to see all the mistakes and cool accidents that create beautiful stunning pieces. As a handy person myself, I absolutely adore this channel and all the people in the comments giving advice 🥰❤

[@LenaMc28]

My partner is a woodworker and she’s forever watching videos on KZbin and always trying to get me into them but I just don’t find them engaging, and then she showed me your videos and I’ve literally just spent a whole day watching, I love your projects the time and effort that goes into them is amazing, thank you for giving me a love for woodworking my partner is now very happy 😂😂

[@vjdjwaffelz]

As a paint guy thats made spray booths on construction sites MANY times i highly reccomend watching the tv serries "dexter" to get better understanding of making a "clean room"

[@ollietheartist1719]

I think the thing that was cool about the other one was the dominant being the burnt wood in the design. I’d love to see the reverse- the void being the unburnt and the majority of the table being burnt. Love your vids ❤

[@nancylynch6045]

I love this idea! Like something recovered from a fire.