Blade guides for my 26" bandsaw

[@spinningchurro]

I’m so happy you’re healed up and doing big projects again.

[@Mrlaughy99]

I'm currently building your 20" bandsaw and last night I got it powered for the first time it was very rewarding and is running great. I too haven't actually balanced the wheels yet but they seemed pretty well balanced just on there own bearings. I also did the same thing threading the bolt in for the upper guide block but I added some glue too. Love watching your videos!

[@iainburgess8577]

Matthias aways manages a fascinating mix of beautifully finished & rough but ready that I always struggle with in making. Very fun to watch.

[@gizmohawaii]

On end grain tap threading after drilling a slightly smaller hole I use Hot Stuff (CA) and spread it all around in the hole with a BBQ stick. Let it setup and re-drill the hole to ream out excess then tap. This for me makes the threading hold and last for a longer time. Cool Band saw build by the way !

[@Loekamber]

okay, I won't remind you of the loose sleeve... But you wrote ediging there which might be worse

[@alejandroalessandro7820]

Think that's that cheeky Matthias trolling us

[@arlingtonhynes]

@@alejandroalessandro7820 I think you’re right.

[@AllenBrosowsky]

@@alejandroalessandro7820 Face it, there are trolls that have earned that.

[@_P0tat07_]

69 likes. Eyyyyy

[@reidflemingworldstoughestm1394]

Call me if you're looking for a annotation editor.

[@janhbrenna4264]

For some reason i never get tierd of bandsaw and dust collection builds, or anything else Mathias builds :)

[@brodystowers8092]

Ahhhhh. Another wonderful morning. Matthias posted a new video! Please keep 'em coming for all eternity!

[@DesignPrototypeTest]

I will always love Matthias. I found his Woodgears website first back in like 2012 then when I realized it was the same guy making KZbin videos I was super excited. Thanks for the videos! Don't ever quit.

[@chrisgriffith1573]

I really like the way you engineer the grips for your guide adjustment arms, very sturdy and secure. You make it look so simple, but I am sure you took several hours to get there... I watched your guide for Big Bandsaw Guides and see how much time you spent thinking about these details. Great reference!

[@vertigo72480_official]

Matthias with the sarcasm. I freaking love it.

[@paulsmyers203]

10:15, shaking in reference to having a stand or not, you might want to look into trebuchets on wheels. I think what you're seeing is related to the concept that trebuchet designers use when adding wheels to their systems. I wish I could explain more but I was tricked into taking chemistry instead of physics in high school. :D

[@DATTURTL3]

This was posted at the start of my shift today. I just got home. First thing I see and I’m happy I did!

[@dannyjepp985]

That's so fascinating about the resonance frequency. I'd love to see you crunch some numbers regarding this when you get to the balancing.

[@Bence205]

I absolutely love your machine builds. Seeing you tackle yet another bandsaw, i finally gave in and bought all your bandsaw plans. Super excited to start building in a few days!

[@davidcapes9629]

Funny how much time I spend watching this man make bandsaws.

[@MRrwmac]

Matthias, Another great walk through video. Makes me want to build some even if I don’t need them, yet! Thank you.

[@kiwdwks]

Always amazed what you build! Not many can saw they've made their bandsaw...

[@vvvbbbbcccc]

Matthias, I've been watching your videos for years and I love them. FYI, I have absolutely no intention of ever making any of this stuff.Keep up the good work and keep on trolling the trolls.

[@rpavlik1]

Love seeing the process of these "rep-rap bandsaws"

[@Lucas_sGarage]

I get that joke of 3D printers good job bro hahah

[@qvatch]

The Gingery of wood.

[@TheDrake]

But he's using wood, so wouldn't that be "rep strapping" ? :P

[@ManMadeOfGold]

Turning bolts (or cammed out philips head screws) into flathead screws is one of my favorite power moves!

[@Alex_science]

It is amazing the level of quality of your jobs! Congrats

[@michaeljohn7398]

Brilliant as always 🙂. Thank you for sharing your experience and knowledge. Cheers from Michael. Australia.

[@jeanmike]

And here I am.... Bought the plans and still haven't started building mine. Hope I can start/finish it this year.

[@adammenz]

HEY... I didn't notice it till you pointed it out but your shirt sleeves are entirely your business!!! thanks for your content enjoy your creativity and ingenuity!!

[@daniel_bohrer]

Thank you, I couldn't have thought of a better comment! 😁

[@ShopTherapy623]

When you have a tripod shot like that, get your camera in the focus you want, and then switch the lens to "manual focus." The focus will be set, and you won't go in and out of focus like you did there. Awesome video as always! I've already built your first band saw......maybe time for an upgrade?

[@enriquemacavilca7668]

Enrique, Desde Argentina, no entiendo mucho el inglés pero muy contento felicitaciones eres un fenómeno con tus vídeos aprendí mucho. Aunque aquí no hay las herramientas ni materiales que existen allá en fin me arreglo con lo poco. Saludos.

[@cbalan777]

The wobbling you described makes me think of those Japanese pagodas that have a giant beam and joints made to move and absorb the energy of earthquakes.

[@theobserver1219]

Great build! I see you as one of the standard bearers of woodwork! You inspire me to improve one video at a time!

[@technikfuzzie]

Hey Matthias, I'm waiting for the Plan, i need a Bandsaw so much and the 26" is the perfect size. Greetings from Germany!

[@thesesh5629]

So for the blade guides would using something like nylon instead of that exotic hardwood work ? As I know it’s used in things like top hats and sleeves for moving joints etc. or would bearings being better instead in this case ? Would appreciate any feed back

[@yorkshirepudd7532]

I got plans from mat for a band saw years ago. It still runs sweet and has had plenty of abuse thumbs up from me

[@user3141592635]

I have a tip when you thread machine-threads into wood. After the first round with the threading-tap, you soak the threaded hole with extra thin super-glue. After it has set completely, run the tap through the hole once again, allways dry and de-greased. Then you might want to repeat the process one or more times. Make sure the tap is clean before repeating. The glue cuttings tends to stick to the tap grooves and might damage the threads on the next pass if not removed. I use a needle to scrape the grooves clean. It flakes off quite easily. This strenghtens the threads greatly and protects them against wear as well. Do not use "Zap-Kicker" or Acclerator, just take your time and let the glue set as normal. Use parrafin-wax, bees wax, or similair compounds as a lubricant as needed in the final usage. Not oil or grease under any circumstances.

[@leksey7870]

Great machine turned out! Saws easily, like clockwork. Good luck!

[@latherookie]

Amazing job on this saw. I really am considering building one.

[@maxupp]

Hey Matthias, the shaking gets worse, because as you are adding weight you are shifting the natural frequency of the frame clsoer towards the frequency of the oscillation. Balancing the wheels is the way to go, or if you want to be fancy about it, add a tuned absorber.

[@Didin95]

I enjoyed watching some of your videos and it taught me a lot

[@bird9455]

Why not all of them? Are you some kind of hater?

[@Didin95]

@@bird9455 No friends, it's not like that, I'm just saying that because I haven't watched all the videos on this channel

[@matthiaswandel]

'com on, you can do it! :)

[@Didin95]

@@matthiaswandel thanks i will do it 

[@_P0tat07_]

Always a treat to see a new video, Matthias!

[@stoffes]

you my man is a engineer and a pioneer in the industry

[@bbrockert]

The angle grinder is an under-appreciated wood working tool.

[@antraxxslingshots]

I´d like to ask if the downward angle on the bladesupport on the upper guide isn´t counterintuitive. I know a downward angle might look like it guides the blade itself better, but wouldn´t an upward angle deflect stuff like clogged up sawdust way better then this "pit" that might even catch bigger stuff and get the blade stuck? I doubt that funnel shape is necessary since the blade is already "threaded in" if i might say it that way. A funnel helps if stuff is not guided from below right?

[@matthiaswandel]

That's why the bottom guides aren't downward. But the downward angle also puts the blocks closer to the workpiece, and wood in general wears less if it's rubbing out of the grain than in. Into the grain could lead to jamming if the blocks get loose too.

[@antraxxslingshots]

@@matthiaswandel Makes perfect sense, thank you for your reply.

[@mirsimz]

10:54... I always enjoy your videos Matthias! Especially when the ediging is just right! 😂

[@canoetipper019]

Ilike the project...worts and all...like the frame falling just like it would for any average person...lol. Cheers from NB

[@nippocast]

First I put the like and then I watch the video, I trust

[@LeesChannel]

I've been watching the progression of this build and the quick an casual sawing, thinking to myself "geez, how often does he get cut?" Then right in the beginning of this video a healthy hand turns into a cut hand in the next scene.

[@sergebeata7290]

Ce mec est un génie dans la vulgarisation de l'ingénierie !

[@petermoore9504]

If you can get some elastic strap 50mm wide or so you can make some arm bands you can put over any shirt. Snooker players used to use similar things with their shirts. Cheers

[@mpetersen6]

As to balancing the wheels. When building the wheels you could place threaded inserts every 30° (15 works better) and use those to attach you weights. The farther from the center of rotation the better. There are phone apps for checking vibration levels. Before I retired I used to have to balance large centrifuges for waste treatment plants after rebuilding them. Hey, it's a growth industry, every body poops. And every year there's more people. For centering the bearings on the screws. Just use short bushings either out of the hardware store selection or from plastic tubing if it fits.

[@esotericsean]

I'm really grateful for all the videos you post Matthias. Does is ever feel weird to work on a project without filming it now?

[@KaleidoscopeJunkie]

Your attention to detail is always awesome. But showing at those gorgeous, brown eyes at the end is genius. Everything goes right out f My head and I have to watch the video a second time. :-) -KJ

[@DJMankiewicz]

I like how Matthias expresses frustration like a Canadian Hank Hill.

[@birigoboom]

Unlike the other Canadian, "FOCUS, you F*CK" 🤣

[@wolfman75]

Looking Great!!! Loose Sleeve!!!! Did you also see the almost kick back on your table saw? Thank You for sharing!!! 😃👍😁😲😎

[@Yonatan24]

Why are the lignum vitae blocks at an angle? So you can get more in the same space?

[@nicolasgoosen5142]

You are a legend! I've learnt so much from your channel, thank you! Oh, and by the way, your sleeves were loose while sawing...

[@georgebayliss3291]

Coming along nicely, Matthias. Always enjoy watching you build your machines. Is it possible for a total (estimated?) build time to be mentioned when the saw is completely finished?

[@stevem815]

Second this! It's a cool project but I can't help thinking I could spend the time working my normal job and buy two bandsaws with what I'd earn in the time it took to make this one. I guess that's probably not the point of it all though. I guess that's kind of like looking at people riding bicycles and thinking 'but I can drive way faster'.

[@georgebayliss3291]

@@stevem815 I think the idea is he gets his own custom design to how he wants the saw to function, which a store-bought saw wouldn't give Matthias. I imagine he gets extreme satisfaction in and at the end of the building process.

[@BennettPictures]

10:19 Wow that's wild, its like the wobbly stand acted as a gimbal stabilizer

[@martinsch565]

Why is the top bearing not rotated by 90 degrees? My inituiton tells me it would run better that way, but I have i seen it like in the video in a lot of bandsaws so it must have some advantages. Whats the reason to have it like this?

[@matthiaswandel]

too noisy running that way.

[@byrdt6528]

You’re an impressive engineer!

[@tlange5091]

focus dammit? I remember the saying differently. Anyways, superb video about making the guides with always new information. Thank you

[@bird9455]

YOu, my friend, are a genius!

[@johninsana313]

I enjoy your videos, and realize your plate is pretty full and you kind of do your own thing, which i respect. But would you consider making a video just about precision and errors. When you may or may not want or need precision, ways errors are introduced, how to avoid them , etc. In your videos you often comment about this but i thought it would be nice to have your take and thought process on it in one video. I was thinking about this when i see you trying to dial things down to a few thou and then wonder if its all for naught, as something like thermal expansion of the table saw or band saw blade or the axles might be double that amount

[@ajl9491]

Mathias can you do some holding strength experiments on tapped holes in wood?

[@matthiaswandel]

yes, I did at some point. I broke the bolt.

[@fnfjan]

Hey! Your shirt sleeve is loose

[@stingray4567]

I cant believe he didnt notice that in all the hours he spent ediging this video!

[@antraxxslingshots]

@@stingray4567 ikr? (kudos for including the spelling error...i didn´t even notice that the first time!)

[@niqhtt]

And I read that as that damn ocarina of time fairy...

[@mentaldemise]

Hey man, your shirt sleeve is loose! :D You're an inspiration.

[@richardpatterson4312]

I'm going to build this bandsaw. I want to have 16+ inches of resaw height. Maybe closer to 18. Is it a simple as making the frame taller? Will I sacrifice other features or usability in doing so? I'm sure the blades will cost more but in terms of detail work, stability, etc. Thank you.

[@PiefacePete46]

A family friend was using my father's engineers lathe, and his loose sleeve was caught by the chuck jaw... result was a shattered wrist in about one millisecond! Thanks for pointing out the lurking danger in your case.

[@eideticex]

Maybe foam and paver base to dampen the vibrations. Would have to play with the thickness of the foam a bit to find a good balance between stability and dampening.

[@matthijspw]

For holding bearings, I like to use countersunk bolts with a head a fraction larger than the inside diameter of the bearing. E.g. M10 for a bearing with an ID of 20mm. It is nearly flush with the bearing and keeps it nice and centered.

[@matthiaswandel]

yes,if you have bolts like that

[@MCsCreations]

Amazing work, Matthias! 😃 I'm almost deciding to build my own as well instead of buying it... But we'll see... 😬 Anyway, stay safe there with your family! 🖖😊

[@firsttpt]

For those of you thrown by the odd 18mm plywood dimension mentioned, it's just standard 45/64ths plywood as measured in freedom units..

[@ljoffe]

Being an engineer you should be familiar with how buildings are designed to survive earthquakes. They have liquid plates under the building so that the building can shake with the earth movement and not come apart. That is the same reaction you were describing with the wobbly base on the moving bandsaw. Just thought you would want to know. Love your builds.

[@crackin2000]

You should make a clear plexy enclosure for something so beautiful.

[@wecksell]

I think there is static balance which you fix but dynamic balance that is probably the cause for your imbalance, that is, your cg is centered in the plane of the wheel, but you have weight differences in the other planes. See what a car tyre balance machine does when it spins the wheel.

[@LordBarbox]

Looking forward to an upcoming video titled "DIY Tuned Mass Damper for my 26" bandsaw"

[@MikeFyxdt]

How many band saws is enough band saws?

[@anderswegge6828]

N+1 where N is the number of bandsaws presently owned.

[@daniel_bohrer]

It's the same as with clamps.

[@MikeFyxdt]

@@daniel_bohrer - Clamps formula N+2, because all clamps should have a twin.

[@johnfithian-franks8276]

I didn’t notice ether, I had to run the video again to notice so if you had not told me I would be none the wiser. I have already watch most of your videos three or four times, even your oldest videos as I have most of your plans as well

[@carpdude73]

Nice! Looks like it cuts better than my Grizzly!

[@ndmusick11]

I'd be interested on your opinion about using fluid balancing to balance the band saw wheels.

[@matthiaswandel]

doesn’t work for fixed axles

[@MuhammadDaudkhanTV100]

Beautiful ideas brother and cool content

[@ciroarienzo8409]

Congrat for work and project from italy

[@decyrano]

Where will the sheet music stand be? We are dealing with harmonics, and you will want to be in tune when your band is in session.

[@Hoaxer51]

Matthias, could you at some point explain the best speeds and pulley sizes that would be best used in using a band saw to cut metal? I know that you cut metal at times and it would be nice to have a saw set up to cut metal especially if you have multiple saws.

[@matthiaswandel]

you need two stages or reduction to cut metal. I have a video about cutting metal on my bandsaw.

[@Hoaxer51]

@@matthiaswandel, I’ll check it out, thanks!

[@chrisgriffith1573]

Love hearing the kid's video game upstair while you are trying to figure out the balance for the wheels... lol.

[@matthiaswandel]

its a piano

[@michelevitarelli]

Amazing project. Thanks for sharing.

[@sdavidleigh6642]

genius at work.

[@FredrikRambris]

Will sawdust on lower wheel tyre become a problem?

[@themastermason1]

I always come back to Matthias's channel after someone tries to talk my ear off about 3D printing.

[@TWX1138]

Yeah. 3D printing has its place but it seems like a lot of people want to claim that it's superior even for applications when it really isn't.

[@DanielH]

You have a wobbly band saw

[@spencerbass7142]

Interesting, it is a fun video to watch. You are quite handy.

[@yossiyaari3760]

I have a bandsaw question, and I don't know where else to ask it. Why are the wheels so big? Could one build a bandsaw with a smaller wheel size and same blade length?

[@Havreflan]

3:06 It's happening. Won't be long before Matthias starts taking apart DIY machinery to assess the skookumness of hardwood cogwheels. Keep your stick on the ice.

[@crocswithsocks1003]

someones been watching too much AvE

[@TheVisidor]

@@crocswithsocks1003 that is impossible! There can never be enough

[@neilf4128]

You may have answered this question a bunch of times, I apologizes. Why do you need / want, more than two bandsaw? I do however love watching you engineer shop tools, so thank you for your passions

[@daniel_bohrer]

he's answered this in the first video of this series, a few weeks back.

[@neilf4128]

@@daniel_bohrer ok. Thnks. I'll go look and see if I can find it.

[@neilf4128]

@@daniel_bohrer Nope. I missed it. I still have no clue why He's building yet another bandsaw, unless it's just because he can. No worries. If you know the reason, I'd sure appreciate an answer, however, life goes on. Thanks.

[@tryphontournesol427]

@@neilf4128 He had no 26" bandsaw.

[@RemyTerjanian]

Yay more bandsaw content!

[@lawrencebartel5605]

Why do you choose to mount the upper blade guide bearing orientated such that the blade runs across the side of the bearing? I've had some trouble with that in my unheated shop. The bearing may not turn freely if the grease is too cold and then the blade wears a slot in the edge of the outer bearing race ruining the bearing. I think Carter blade guides turn the bearing 90 degrees and it seems better to me. Of course I don't own a Carter blade guide...too expensive for me.

[@matthiaswandel]

I thought running it on the outer edge was better way back, but its much louder, so I switched back to the standard orientation for the top bearing.

[@rigidironworks9834]

Mathias, when you built the first band saw, did you experiment with various designs or did you know right from the start how you were going to do it ?

[@matthiaswandel]

watch my videos about what I learned from my 18" bandsaw build.

[@jeffm4459]

9:58....Is that the safe way to cut a bevel with blade angled toward fence?

[@TWX1138]

Would you care to address why the roller bearing is mounted in that orientation? I'm curious as to why so many guide assemblies are made this way but I'm not even sure where to start in order to find out.

[@mckenziekeith7434]

A long time ago in one of his other bandsaw builds he tested them the obvious way. It was really, really noisy, if I recall correctly. So he decided to do it the way everyone else does it (the way you see in this video).

[@PJSproductions97]

You ever have any issues with reliability on the threads tapped right into the wood? Obviously they must be mostly fine otherwise you wouldn't do it, but they must sell threaded inserts for a reason right?

[@matthiaswandel]

Way back I experimented with how well the threads in the wood held. But I ended up breaking the bolt first.

[@BeeRich33]

Sleeve: construction adhesive. Or pocket screws.

[@THX..1138]

I'm thinking the shaking was coming more from the bottom wheel. It got worse when you put the weights on top because you were in essence placing them at the end of a lever the imbalanced bottom wheel was acting on.

[@hassanal-mosawi4235]

Thanks for sharing that, good build!