Blaster Surface Shield Undercoating - How Did it Hold Up After the First Winter?

Рет қаралды 12,521

Күн бұрын

Пікірлер: 34

@thebrookster 9 ай бұрын

you don't want to clean that dirt off, that works with the oil as a protective coating. I use it on my 2020 F150 in Ontario, Canada

@paulthomas8518 4 күн бұрын

Good job set cans in hot pale for an hour no clogging if that happens good review!

@chrisridebike8 10 ай бұрын

I’m torn between this and Fluid Film. Probably can’t go wrong with either one. Can’t get Wool Wax in my area.

@algarinthompson8749 10 ай бұрын

I have been using Fluid Film for the last 3yrs on my JLU, and so far there is no rust at all.

@chrisridebike8 10 ай бұрын

@@algarinthompson8749 I ended up getting fluid film. Thanks for the feedback!

@skrsys 10 ай бұрын

I used to use Fluid film now I switched over to Surface Blaster. Both are good products, but SB seems to hold better, and it is easier to apply. You have to warm up FF in colder weather and mix it up really good in order to apply. I don't find that as necessary with SB.

@chrisridebike8 10 ай бұрын

@@skrsys I just finished up Fluid Film today. I’m in Hawaii but moving back to the mainland, so the truck will be protected on the boat and will only see occasional trips to areas with road salt. It should be more than adequate but it will definitely be something to consider if I redo things in the future

@skrsys 10 ай бұрын

@@chrisridebike8 you should be good with either one. But if you’re going to do it on a regular basis, I would switch to SB for ease of application

@alisaleh2509 2 ай бұрын

This spray stops rust very good product i recommend to apply it once a year for better protection

@thomasbartlett3409 7 ай бұрын

Vehicles also rot from the inside out. All inner frames, and enclosed areas like rocker panels and doors need treatment . They are more important than the exposed areas...

@T-Mo_ 2 ай бұрын

I don't skip a year because i only use 2 cans on my car and they're only like $9.30 at home depot. Used fluid film for 3 years and today sprayed on my 3rd application of surface shield.

@chucklucas8747 2 ай бұрын

They have it on sale for 5.79

@46GarageUSA 4 ай бұрын

Surface Shield 🛡️ updated their can nozzle so no more issues with their cans

@Slythey 3 ай бұрын

yes they did- they sent me a whole 6 pack replacement free of charge because I had gotten my hands on the bad ones

@workingshlub8861 2 ай бұрын

@@Slythey good its not just me...got a few bad cans last month..i was annoyed ...glad they fixed the problem.

@TK-ff5kc 3 күн бұрын

Harbor freight has this and was 8.99. Used this on wife's new outback.

@sogbryan6633 2 ай бұрын

@4-LOW. The one big thing you missed is coating the inside of the frame!!!

@jasonfalk7696 10 ай бұрын

Now that you've had the Super Duty for a while, do you have any regrets? I have a 2020 Ram 1500, that I'm consistently over my rear axle weight by 400 lbs. A new trailer will help that, but its still overweight.

@4-LOW 10 ай бұрын

I miss my last Ram every single day simply because it was a much nicer vehicle. It was a better daily driver. It was more comfortable in winter. The Ram Laramie is just amazing. Having said that, if I could afford a nicer trim level Super Duty with a gas engine I'd never look back.

@jasonfalk7696 10 ай бұрын

@4-LOW this is the decision I'm faced with. Right now, I put one atv in the bed, and three machines on the trailer. The biggest plus to a Ford, is the Super Duties shorter bed is still 6¾ long. Rams is 6'4", which means the Ford tailgate will close, and the Rams wont.

@kenj.8897 10 ай бұрын

To do a really thorough job it's like 7-8 cans on a Super Duty . Inside all the frame rails , behind the bumpers . Up over the rear wheel arches , up inside any pinch welds , when you really get into it the cans go fast . But Kentucky isn't Michigan so maybe you can get away with a lighter touch down there . 👍

@camelblue713 10 ай бұрын

90K miles and just one treatment? So in your area are "soft" winters? Seems they dont use much salt, otherwise it would be rusty already i guess

@JohnnyReno71 4 ай бұрын

Do you spray everything underneath? Is there anything you shouldn’t hit with this ?

@slumy8195 2 ай бұрын

rewatch the video and pay close attention whats covered in black.

@TheMajictech 3 ай бұрын

Doesn’t look like you got enough on the exhaust 😅

@LayneSteighlee 5 ай бұрын

surface shield or nothing! it is far superior to any other similar products...results from every youtube channel shows this.

@Bloodbain88 4 күн бұрын

I've been using fluid film for years and I'm thinking about trying surface shield now. My ONLY sticking point is that I don't know how well it acts as a lubricant. Fluid film does great on all my door and hood hinges and suspension parts as a lubricant because it stays so wet. So what's your opinion on how it keeps those moving parts lubed vs Fluid film?