XJ Rear Tire Carrier Install - JcrOffroad

[@aidanmakinster922]

This is much better thought out than some others ones I've seen. I really like the small thoughtful details incorporated into it.

[@albertosotelo9969]

Those tires are no joke!!! I thought you were kidding, I can't imagine how difficult it would be changing a tire on one's own!, looks amazing, someday I wish I can do that to my XJ

[@mfcj09]

I love your channel I just bought a 1991 and your jeep is the inspiration for how I want to build my jeep! thank you for your channel and great feed!

[@gateway8833]

I have got to admit I have never seen anyone bet their bearings so proficiently. When we filled bearings we used a sweeping motion, I think I like your method better, looks like it gets the job done much faster.

[@ManMak6]

The color of your Jeep is just awesome!

[@wadehiers]

It's hard to tell since I'm watching on my phone.. but I think you put the seal in backwards.. it looked like the lip (with spring) was facing out.

[@deadkemper]

That looks so well made and expensive. Great vid

[@geipelstoys9923]

I worked in the shipping department at JCR for a little while. those tire carriers were fun to box up lol

[@bleepinjeep]

tyler geipel everything comes in rectangular boxes now with foam.

[@geipelstoys9923]

yep, spraying that foam in the boxes got interesting at times lol

[@briansmobile1]

That unit looks SHARP! I like it!

[@jbossnack]

God bless your mailman! Nice install. Looks solidly built.

[@nicderemer1]

Those birds chirping are so peaceful

[@haymakerish]

I have to say that I really enjoy your videos. Just bought a 98 zj. Hoping to build an overland out of it.

[@MrGigaHurtz]

Bleepinjeep could you do another video on a different rear tire carrier? This is an awesome video, I love to see it w a different tire carrier. The JCR is cool but @ $1800 (after you add the powdercoat and brackets for rotopack+jack) it is crazy expensive. Think of all the other things you could do w/ that $$$$. Are there any other rear tire carriers you'd recommend?

[@syzfilms]

Enjoy your stuff Matt. Good Job of showing your work in a fun way.

[@stevenator117]

This would definitely be worth the time to do I have an 01 Cherokee with no rust whatsoever on the body

[@benjamintresham9649]

This is a great looking carrier BleepingJeep. Very good design. Is the latch a two stage catch?. Just like a car door type. I don't want to be picky but I think you have installed the grease seal upside down. That thin section of rubber that stands up that you faced down is meant to rub on a flat surface on the stub axle and seal out dirt/sand. If you look at the steel section of the seal, look at the end you are hitting with the punch carefully you will notice it has a chamfer. This makes starting or inserting the seal into the housing easy. Trailer axel seal it is and they are fitted this way. Also grease the seal's lips before fitting on to the stub shaft or axel. The main lip is the one with the small tension spring on the inside of it. The way you fitted it this spring is now exposed to the weather or elements. Springs are only on good quality seals. I like all the work you do on the Jeeps. It's good to see someone having a go.

[@latamirlaroux3632]

Before installing the spindle to the bumper you can use it to set the lower bearing.

[@retiredppd]

I have never saw anyone pack a wheel bearing like that. It gave me a good laugh.

[@xxRamD3yruxx]

retiredppd I thought you push it in from your palm, not pat it in

[@robertwebber2107]

You have to admit that it did work though.

[@moose2934]

Easily the most R-rated BleepinJeep video out there

[@mustang7288]

retiredppd That’s actually how you packet dumbass

[@sleepy6636]

Sounds like Rudy is an expert in packing

[@zombiecop77]

Damn man...I let my son watch this & ur on the screen greasing up and slappin that bearing.

[@otmtex]

Great vid, I used coiled wire for my license plate lamp and 3rd brake lamp on my TJ, helps with the swing out.

[@montimitchellsr]

I’m a land cruiser owner and I enjoy your videos Thanks. M

[@garagezu]

This is the best project I've seen so far. Great job

[@swimmer8585]

3:19 the neighbors are gonna think I'll be doing something else lol

[@theronellis1514]

lmao

[@carloscubillosc]

Hello, thank you for your video, it is very detailed. I've been looking for that rear bumper for a while, do you know if I can buy it somewhere?

[@dreamgaming1758]

I drilled holes and add grease nipple in my tire carrier so I can top up my grease

[@trailblazer4256]

I wish they'd make some of this stuff for my 4Runner!

[@mikebarto1743]

Great video! I have that bumper and carrier & i love it! Very well built & it looks great

[@jamesdoe5824]

That is a sick rear bumper kit. Wow I need this for my xj

[@caparzzo]

i'm watching your videos, and i don't even have an XJ, one day i will.

[@javiroo1743]

same here.. don't hurt to dream wright?

[@josepttellez5662]

+javier hernandez yup I hear the 1999 had the best engine

[@Transphoenixbiker]

+Jose Pt Tellez nope nope nope....98 is the last good year after that they have block cracking issues.

[@adamswaz4878]

Not block cracking , 0331 stamped heads have head cracking issues

[@laqutis1119]

bentovergarage Wrong

[@officialWWM]

This video is 7 years old and this is still one of the best looking tyre carriers on the market. The only thing I don’t like is that it blocks the indicators a bit.

[@MichaelStiles]

Hey! Question for you, do you still own this bumper and tire carrier? I have the same one but for my 03 TJ. I have all of the accessory parts except for the rotopax mounts. Unfortunately, JCR discontinued the bumper/tire carrier and the accessory parts. I have reached out and they said they wouldn't be able to help. I am wondering if you are able to take some measurements for me so that I can have a set fabricated. Unless of course you are willing to sell them! Let me know! Thanks!

[@pwagner0148]

Love the mail man helping lift the tire Lol

[@joshsquire555]

I screwed up and bought the OR FAB Cut n Fold rear bumper. It's a great bumper, but I want a tire carrier, so I can use the back for more camping gear.. Gonna have to make a custom hitch carrier now..

[@pinay56]

When I was in the Army years ago, we used to pack wheel bearings by taking a large glob of grease; then holding the new bearing in one hand, force the clean bearing into the grease, while moving it around in a circle. Then once you finished you would wipe off the extra grease, or just push the greased bearing into the wheel......

[@doalex2085]

Very nice I subscribe cause my pore 96 Jeep is parked bad knocking. Going to put new motor in soon. And want to fix it up thanks for your help

[@blinkandhockeylvr182]

Any rattling or anything with time? Sweet bumper but curious about how the latch held up, want to get one myself

[@hopefloats7573]

I can tell you exactly how it's held up. Quite well. Latch still works. Only lube the pin occasionally or it will stick. Jeep has run a lot of washes and rough roads. Minor rattle. I run a 33 10.50 15 to reduce weight. Also installed a rear camera.

[@blinkandhockeylvr182]

@@hopefloats7573 sweet, good to know, thanks a lot dude!

[@jaxonmarkey9081]

Mom-“what are you watching?!?” Me-“How to pack grease”

[@3fff]

Nice work 👍 With my best regards From RIYADH Capitol of SAUDI ARABIA

[@yotasteve3646]

Did anyone else notice that this tire carrier entirely blocks BOTH reverse lights?

[@Keith1212]

Yes lmao! Jeeps have never been much about safety.

[@aznes004]

The bumper has cutouts for LED lighting

[@markyboi79]

Real men don't ever need to go backwards!

[@zzz7zzz9]

who are reverse lights for anyway?

[@zzz7zzz9]

dumber is that it completely covers the license plate. I have never liked a swing-away tire carrier. I like having sight out my rear window. I carry my spare on my roof rack, plus there, it's weight is evenly distributed on the vehicle.

[@mheringhering6045]

How much total for bumper and the carrier? I know depends on vehicle. Mine is 1991 Ford Bronco XLT..

[@clayzer11]

Do they make this anymore? I cant seem to find it anywhere.

[@kingblack22ss]

Where can I find this setup do they sale this anymore?

[@23Boarder10]

Where did you get the XJ painted? Looks like a pretty good paint job.

[@bradstratton639]

Does the rear even still open up with that installed? Must weigh a ton

[@blakerogers407]

Is that bumper and carrier still available?

[@CJLane-62]

I like that, wonder if its still available 7 years later,wouldn't mind having 1 made from aircraft grade aluminum, but would angle it outward at the 2 ends so tire and rack has a bit more space tween it and the back of the XJ rear hatch!😏

[@yjmoneypit]

how many times did u put that part on loosely

[@GotrekGurninsson]

Should add a grease fitting to the hinge so you can grease it without taking it all apart again.

[@vikingrobot4179]

Do they still make this tire carrier? They have a vanguard bumper but I dont see the carrier.

[@onwheels8232]

14:00 take out the air. It's gonne be lighter 😂

[@1991zakman]

add some helium

[@wsgregory]

Well as fan and an xj owner myself with long arm / Travel custom built by me and a 4-link coil spring upgrade instead of Leaf springs this tire carrier is much too heavy and then to having to hang a oversized 32x12.50 x 15 tire and wheel on it will overtake the enjoyed spring rates the owner enjoyed prior to install. They fail to mention this and how expensive the alternatives to buying extra spring for both leaf springs or coils, to compensate. This is an upgrade that would be wise at time of build. It’s is HIGHLY recommended

[@PlumdogMilli0naire]

3:39 Sounds like my room at 11pm when I was 16

[@423XJ]

Total weight of bumper and tire carrier portion? (without tire, hilift etc)

[@stevencallaway3777]

I sure would like to purchase just the latch assembly and the locking pin assembly for a custom project I'm working on

[@theviper6602]

Hey matt do you know if they still over this bumper set up i dont see it on their site i really want this rear bumper

[@CharlesWillisBonsai]

I was waiting on you to put the spare on a jack to get it up to the carrier.

[@sergkaizen5342]

Nice design wish they made similar unit for jk

[@conormccullar4797]

Where did you find that f Farm jack? I looked for a gold one to match my truck

[@luisdesantiago7286]

Love the bumper and the carrier! I am deciding between the xrc and this one. Whats the wheels brand / make?

[@CarlosRivera-oe1zr]

feet women

[@michaelboyle4119]

Looks awesome . Nice job .

[@yandriarce2439]

Maybe they'll smarten up and make the carrier out of aluminum light and strong

[@SamVeneman]

I'm about to buy a used one of these. How is it working since this install?

[@tallmanmike6436]

I enjoyed this video, I like build videos in general, but I have a question: What happens if you get a flat tire when you're out in the boonies? Getting the spare off the carrier isn't too much of a problem if you're careful, but how do you get the flat tire back onto the carrier? Do they make a small winch for it? We aren't all muscle men.

[@SuperDad1776]

Use a ratchet strap off your roof rack rails to lift it up or run a board to the bumper roll it up an pivot onto the mount but honestly just don’t go out alone would be best practice

[@MyAlexVideos]

im watching your videos in my xj.....i think i love my jeep yo much lol

[@MrCard031584]

bearing race driver set from harbor freight for about $15-20 bucks would help tremendously in setting that seal...

[@MrCard031584]

also a bearing packer for about the same price...

[@wsgregory]

Derik Card if you require only one use IF your very careful, from the Harbor freight bearing and race drivers, when if you are willing to spend just a little more an American made set by any manufacturer would be the better and safer advice. They will tend to out last their owner and the next owner. Hoping no one took your advice and bought the Chinese version im sure they are missing a finger or hand or something. I try never to recommend Chinese junk. It’s dangerous. I know this is an old post, but one day it’s likely to come back to bite you, referring harbor freight hand tools. Not sure why we even let them off the ship. It’s not worthy of the name tool.

[@paulalabe18]

I've been looking for something JUST like this, but for the WJ Grand Cherokee. Got any links to one? I won't how hard it would be to modify one of these to work with a WJ?

[@wilsoncampos5012]

Good morning they ship the products to Perú?

[@mathewmyers8252]

love the set up

[@Halsafe]

I want an xj now

[@johnheine4099]

Did they discontinue this? I can't find it on their website

[@PhilipGragg]

gotta tighten up that bumper.. or weld it on... when you lifted the tire carrier, you could see the bumper bending from the jeep

[@PhilipGragg]

azzkicker1337 well, maybe with some body stiffeners...

[@1Buckluck]

Seal upside down flat metal part always faces out now you have to take it back off n fix it!!!🤣

[@TundraVic]

Lip seals always face the bearing! Really won’t matter on this particular application...😂

[@broncoiination6398]

What color would you call the paint job on your truck?

[@phuckyewgewgle]

id like to see most people try to lift a 35 with wheel. not to mention generals weigh three times a normal tire...

[@hopefloats7573]

tom Placentia The General tire with the Raceline wheel weighs 92lbs.

[@louisdiaz19]

Brother, you are very intelligent and are great at these DIY's but you need to hit the weights mate.

[@PSS-uw9zr]

Yeah, never put wheels on your ride bigger than you can lift!

[@that__one__guy5405]

Great videos so far! What kind of bumper do you have on the rear that you mounted the swing arm to? Thanks!

[@dirtysouthtv2209]

JCR Off-Road rear bumper and rear bumper accessories. Then there are the rotopax, the high lift jack and the license plate relocation bracket.

[@jessemiller6830]

Who cares about a seal? Lol. Dude rocks. Does way more work than most of you people have ever done. 😂😂. Shit happens guys.

[@macp91]

Hey does any one know the name of those wheels love the look plus nice video!! Thanks

[@suchasreallife]

you have to take the plate off to take the spare off ? spare tires impacted on how are you gonna get it off on a trail

[@skeetorkiftwon]

suchasreallife Mall crawlers don't go on the trail lol

[@skeetorkiftwon]

suchasreallife AAA going to take that tire off. Kid can't even lift his 34 10s lol

[@coupesix]

Yeah that would be super tough to take the license plate off....

[@logan.vanderbeck]

What color paint you got on that XJ? Want to put it on my bronco

[@418garcia]

Nice xj. What kind of wheels are those?

[@bleepinjeep]

kzbin.info/www/bejne/qZLdaKFvrcR4mJY

[@amputnam81]

What color is your Jeep? It's pretty much exactly what I want!

[@creamatedbiscuit4756]

Army green? I think its a custom colour.

[@javiroo1743]

finally got my xj.. what's the totol cost on that setup?

[@Se7enAte]

A bomb proof spindle huh? I'll have to test that...

[@bleepinjeep]

Se7enAte would love to see a video!

[@Transphoenixbiker]

+BleepinJeep I second that

[@javiroo1743]

thank god for the mail man. would suck to be alone and get a flat..

[@CarManiac125]

What did you think of those general tires? A friend of mine had them on his truck and he didn't seem to care for em. I was just curious as I believe he is just not driving right but what do I know, lol

[@bleepinjeep]

I hear they are great on road and sand.

[@skeetorkiftwon]

Car Maniac125 Federal M/T Couragias. Cheap as fuck, last forever for their aggressive tread, UPS and Fedex use these in winter. They hold up good on the trail. Price is right to buy two and not care vs more expensive tires. Downside is road noise. I don't mind road noise. Should get two years out of them. simpletire.com/federal-lt235-75r15-46ce53fa-tires?stmodel=couragia-m-t&stcategory=mud-terrain&sttype=light-truck&gclid=Cj0KCQjwu_jYBRD8ARIsAC3EGCJgXUmXQPKH-uWBG3miu116ibiGTpUZTnDu6lfyWXseIKDXNfTDpQgaAnW1EALw_wcB

[@hopefloats7573]

Car Maniac125 The General's are great in the desert. Lousy in snow!

[@donaldgonzalez4285]

very very nice bro...

[@ajmorgan5940]

Very cool.

[@jorgecantusosa7942]

i have a 01 jeep grand cherokee do u have any wed sites that i can get something like that and any other body armer and bumpers

[@roberthravanal61]

HOLA, DONDE SE PUEDE COMPRAR ESA BISAGRA DE RODAMIENTO? QUÉ NOMBRE TIENE? ESTOY ATENTO GRACIAS.

[@danielpritchett3896]

does anybody know if the bumper and tire carrier in this video will work on a mj

[@HeRcUlEs782]

Nice jeep!

[@joeflint9398]

I have a 2000 Chevy Blazer and I'm trying to find a tire carrier similar to this-does anyone have any suggestions?

[@alejandrojimenez36]

I've a zj and I'd like to buy the front and the back bumper like yours, but I don't know where. Do You have some website to buy the bumpers?

[@bleepinjeep]

jcroffroad.com

[@antonioferrusquilla4976]

So can this be installed on a different rear bumper?

[@theholasoyfrank]

Now thats a big ass tire.

[@fafixsffhj506]

Ile kosztuje taki zderzak

[@franciscomontesdeoca5316]

Super video

[@TheYearout]

What color is that XJ. I did that.

[@junkopotomus]

I did not know Jay Baruchel was into off road fabricating.

[@garagezu]

Great job, like it.