Matt Shows Up to Help Colt With The Smoke Show S10! OnX Offroad Build Challenge Part: 8

This will be the first time Matt has seen the Smoke Show S10 since its debut in Moab Utah against @rudysadventureanddesign717 @MischiefMakerTV @DirtLifestyle @thedirtheadshed on the OnX Off Road Build Challenge. Things have changed a lot but there is still a lot to do. This is one interesting episode!
Vote Here:
www.onxmaps.co...
*********************************
Like this video? Check out these:
ONX Build Challenge Part 1: • The Vehicle You Never ...
ONX Build Challenge Part 2: • Did we BUY THE RIGHT T...
ONX Build Challenge Part 3: • How To Build A Junkyar...
ONX Build Challenge Part 4: • Jeep Suspension On A C...
ONX Build Challenge Part 5: • Steering and Wheel SEC...
ONX Build Challenge Part 6: • CHEAP Transfercase Mod...
ONX Build Challenge Part 7: • IT ROLLS!!!! Rear Susp...
*ONX Build Challenge Part 8: • Matt Shows Up to Help ...
ONX Build Challenge Part 9: • HELP!!! It's Going Ou...
ONX Build Challenge Part 10: • Just Call Me Bob! How-...
ONX Build Challenge Part 11: • Bend & Flex. We Build...
ONX Build Challenge Part 12: • Is This The End Of The...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.co...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on KZbin: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

[@michaelwpaulin4876]

This video reminds me of the first Utube video I ever watched. Bleepin Matt was replacing the floor pans in the White Comanche. I had the same truck then and considered doing that project myself. I ended up selling the truck but I have an XJ that needs it too. I talked with Matt at the Jeep Invasion in Pigeon Forge last year. His Scorpion is amazing. You guys make a great team. Stay Safe in your work. MWP Cosby, Tn.

[@doug9418]

Vote, Vote, Vote, guy's let keep these guy's in the lead, they deserve to win. 🇺🇸

[@susansmith-franks684]

When competing in a team event, it pays to partner with someone you’ve known and worked well with for years. You guys are doing a fantastic build!

[@coltbuildsit]

Thank you Susan!

[@VermontPaintandPhoto]

Grab a old welding jacket cut a panel off and attach to the glasses..a simple alligator clipped string holds the bottom to you. It helps shield and its cheap fix

[@doug9418]

Hey now that's darn cool idea

[@taylormade710]

Getting excited to see y the truck completed

[@AntonioClaudioMichael]

Crazy all the flaces you went and autozone had the brake fitting

[@rocknsnowryan9400]

I'm with Matt, down means South!

[@colbysheppard3682]

I agree Matt. I use south as down and North as up. 🇨🇦 love the build guys your budget friendly approach appeals to most of us off-roaders 🇨🇦

[@AntonioClaudioMichael]

Tons of progress hydraulic ram assist steering looks good

[@jimdawson2549]

Matt’s correct. If a town is south of you is down and up if north.

[@jmowiscoproud]

Hell ya fellas I have to agree, we have a Mills Fleet Farm in my home town, the Home of the Four Wheel Drive, Seagrave Fire Apparatus! All the locals could not live without fleet farm, from Groceries to Gardening n everything in between!!!

[@AntonioClaudioMichael]

Nice custom made weld setup with batteries

[@timpowell3255]

Guys this lil truck is going be wicked cool when you get her done no doubt ! Can't wait to see y'all get there right along with you ! Keep up the great work and thanks for sharing the adventures of the build with us all and best of luck for the contest Gentlemen ! ✌️❤️🙏

[@carlfinnegan6617]

They are called sheet metal tongs.😊 Keep up the great content.

[@1a1u0g9t4s2u]

Another great video eventhough BleepinJeep can't jump. Thanks for sharing.

[@pigasus_1]

I can't wait to see it fully built

[@psg6314]

Awesome video and great job with the truck Hope to see it on the trail and stay safe and God bless from GA

[@ggalland1]

Great video guys. That S10 is gonna look awesome!

[@garychaiken808]

You guys are great. Merlin’s old school garage shows how to weld off your alternator. And colts garage almost looks as bad as mine. I usually don’t let people in my garage. They might get lost and not get out alive. 😂😂

[@dezfan]

He does exist! 😲. Good to see Matt put in some work! 👍🏼

[@mclarenscca]

Fleet Farm sounds like our Farm & Home that we have here! 🙂

[@mathewmay5361]

I love the dedication and team work. The S10 build is awesome and i can't wait to see it wheeling!!

[@granitesand78]

You guys are great!

[@davidboisvert617]

Great video looking forward to watching more of the S10 build. Remember to get more viewers to VOTE for BleepinJeeps OnX Offroad Build Challenge. VOT VOTE VOTE :)

[@bleepinjeep]

All the votes!! Thanks David

[@harrywalker968]

@@bleepinjeep hey i need the jeep outside weather seals,, they crack here something bad,,can you get me a set or 2, ill pay freight,,,,,to aus.. & no,,im not flying there..lol,,i drive ford,,jeeps got bad rep here..

[@richardashley6312]

Loving this build, your video’s are great and full of information and humour. Top shelf stuff! Thanks Colt and Matt. Don’t forget to vote for Bleepinjeep in the OnX off road challenge!!

[@bleepinjeep]

We appreciate that!

[@mblake0420]

The rear of the s10 frame will twist the frame if its too large to handle all the beef. I would box the rear of the chassis especially if you go to a coil link setup. If sticking with leaf springs it may be ok as it spreads the side to side loads more.

[@EdwinCabrera-jx1oq]

I dig your video and" I support your case bro"😂😂😂😂

[@tracyknight5130]

I wish you guys could do more videos together. Y'all are hilarious.

[@AntonioClaudioMichael]

That is super heavy duty Steering

[@evans1756]

I'm gonna be in Rapid City the first week of July. Hope to see you around. :)

[@patrickkelly5372]

Rubber the Right Way has all the rubber seals for the Cherokee. Even the divider bar pieces.

[@bleepinjeep]

Good to know I get that question a lot.

[@jeremystiltner6781]

My grandpa built trailer hitches in the 70s and 80s for people. He had a drill press that drilled up. Iv got it now😏

[@JunoTafoya]

Hella great fun fellas

[@davidborboa77]

I had a transmission slip off a jack and land on me once, not a good time.

[@gonzalez7805]

Good show guys...

[@allentinnell4497]

S10 looking good great job so far

[@edwardsimmons3721]

Always awesome to see a budget built. Any way to save some $$$ is great.

[@tonypatrick9362]

Thanks guys for a fun team work video the world needs more of these great video too

[@jelainecuevas9476]

Vote,vote,vote, this s10 build video, can’t wait to see it.. Bleepinjeep in the one..

[@dannop2562]

Fleet and Menards… Quite the cultural tour that Matt received! If y’all climbed the dinosaurs on Skyline, it’d be like the trifecta!!

[@cameronhoover7561]

Heck yea its coming along!!! Cant wait to see yall kick butt off road

[@keitharnett2647]

All roads lead Windrock get those Utah boys head East last time Matt had Matt out there thought put Morvair in crate ship back Hurricane. Go Tennessee!

[@GrandPappySmooth]

haha love the trail welder! paint it red and put a lincoln sticker on it XD

[@chrispassarella5634]

Made me jump when that transfer case spun down

[@magnusshawn4698]

Matt’s right about the up down thing. Great video as always. Thank you!

[@nicholascooper1193]

having a battery welder setup in a tool bag can be a life saver. Practice with it also.

[@Derf1313]

Gee Matt, didn't check the tool encyclopedia? Think old British sports car, they all got a "Hand Brake", lol! Dad taught me tin nock-en back in the 60's, right along with wood butchering & contracting, lol. Good skills, but who uses lead, when there bondo, lol! Fun build, looking forward to y'all using it! Thanx !

[@AntonioClaudioMichael]

My paint booth is a gazebo 😂😂

[@kakedog]

You can always use the 3,4,5 rule to check for square

[@SSTANDLEY3557]

Matt is so funny! It was hilarious watching him try to tie those strings around his face. His poor wife. Lol!! Mr Colt, it appears that you have lost weight. Doing a great job at it. wished i was. Anyway, God bless!!

[@chrishayford7900]

Up north and down south! Matt is correct.

[@katreniaclark]

Great episode.

[@JeepTeriyaki]

"Here comes the Boom" was the movie... Was Bas Rutten who did that

[@jakebreak8917]

Gettin er done Colt and Matt! I always enjoy the videos!

[@tomizbick4922]

Great job guys!

[@chipprice1174]

Rig is coming along nicely! Most times, as I watch things being built, be as antithetical as I am, I find stuff, some ever so minor, and comment on it. On yours, I don't except for one thing, The wheel base. I have a 120" wheel base, and a lot of times, I wish I had rear steer, or, it hangs me up into the center because of the break over of an obstacle or what ever. That is my one and only concern with your build, except for I'd have gone with an aluminum 7075 tie rod, as when it bends, it comes back out in shape. Something else that helps anything that gets rubbed hard on the rocks, like your tie rod, and maybe your rocker guards, is to put 7075 slugs inside, which requires some milling and fitment. But, it works very good!

[@anthonyraines5951]

"Here comes the Boom" And there is no end to the usefulness of ammo cans especially 40mm cans

[@chrisgilman33]

Would love to see a parts list whenever you’re down. I have a 88 S15 that I need to do something with

[@j.till_z]

Installing new banjo bolts is like music for your brakes.

[@freeidaho-videos]

Best build of the three, best choice of vehicle of the three. One is being decorated, the other is making terrible technical choices, starting with the vehicle. Good luck on the vote. BTW, many of us come for the build, not the grade school antics.

[@sapperROSS]

I'm only watching these guys build, could care less about the other teams lol.

[@travislangolf7800]

Fleet Farm, the MAN'S MALL. I'm from Wisconsin, the home of fleet farm

[@Willisfitner]

It would be real cool to see a square body dime on UA

[@felonysounds]

I bought a 5 speed swap for my S10 and the guy I got it from had one of those welder stick leads as the shifter, so he always had one handy lol

[@davidwoermansr]

I miss that tow yard it was a hippie parts place when I was around Custer/Rapid City depending on where in the Black Hills we were camped (in the early 90s) you could trade parts for parts work for parts I rebuilt an Olds 350 rocket (they bought the parts and paid the machine shop I worked in the yard and towed for them till it was paid for then continued working during the day and used the shop after hrs to build my engine luckily it wasn't hurt bad just lost oil pressure and shut it down while I still had 10psi and dropping and coasted into Custer and the friend I was going to be best man for was related to the owner so we worked out a sweet deal since I was 10 hrs from home took me all summer (by choice) to get my Cutlass ready to rock and roll home then I had to take my single rear wheel 83 K30 3+3 camper special that id extended the frame installed a 14 ft utility bed and my 40 ft gooseneck flatbed trailer to haul the vehicles and parts home I can't remember how many 1 ton axles were chained to the top of the neck I had a couple 454s with granny 4 speeds in the bed with several t-cases a couple CJ rollers stacked up front a K5 blazer and a couple K20s with a shortbed C10 (later converted to a K30) barely on the back of the trailer (we had to remove the tires to chain it down without the rear tires falling off the trailer) lots of misc parts in the vehicles and more picked up along the way home now most my loaded are derby cars so I can stack 2-3 high without worrying about body damage and I take my modified Kodiak top kick if I'm picking up more than rollers for rollers the trusty 83 Silverrattle still puts in work

[@ryanreaves1203]

Drill a hole in a pop bottle next time you drill above your head

[@ryanreaves1203]

Yeah, and four arm saver.

[@slowboat_8651]

From a guy that's 50, I never thought about that, been to eye doctor 2 times to have metal removed from my eye, and yes I had full safety glasses on at the time, but anyway I have used small cardboard boxes in the same idea and works great

[@slowboat_8651]

@ryan-qz5xb that was before face shields came about, I was a teenager then lol, but definitely agree safety glasses are worse then squints,

[@bradleymadosh911]

I got those same welding glasses. I got burned up and was pealing lol. But they did the job at the time. Great build fellas

[@chuckfinley3152]

Coke bottle*

[@JM-yl8md]

here comes the boom!

[@87sport]

great video, very informative. On another note my BleepinJeep merch came in and I wore my "Tree Hugger" shirt out last night. Chicks dig it, lol. you guys have the best build going so far, keep it up!

[@genedwg6689]

Gee I saw a guy from Wisconsin weld stuff using batteries at the Wrecker Games. Nifty idea

[@chrispassarella5634]

Omg is that Matt!!!!!!!!!

[@jaywebb3105]

Wow you will just let anyone work on your rig...lol 😂😊

[@IronDragonSC]

Love the build but I hope that tcase isn’t already leaking 😂

[@hangrymachinist]

This build just keeps on getting cooler with every video

[@thegmanfromsf]

I really enjoyed the 231 doubling videos. However I noticed that you installed the 6 pinion planetary gear in the cut tcase and the 4 pinion in the full tcase, and then the cut tcase is the one closest to the engine to gain length for the driveshaft. Doesn't it make sense to have the 6 pinion inline AFTER the 4 pinion to handle the extra torque of the first reduction?

[@DJ63phx]

Dude when I saw that transfer case start to fall. I put my legs up the block it. I had one of them fall on me for my 41 MB1 Willie Jeep

[@freeidaho-videos]

BTW, you get a "sun burn" not a nice tan from welding without a helmet. I often tack weld things in my shop without a helmet, but after 10 or more tacks, I get a sunburn. More tacks, the more it hurts. Welding is worse.

[@edwardcokley9224]

That's some $hit I'd do... oh the transfer case is falling let's try to catch it! 😂 That said was it the transfer cases falling or the fact you legitimately tried to catch them (on a creeper no less) that made you say "that was scary"

[@bleepinjeep]

It was scary because I thought it was falling on my lap, haha

[@poolmonkey7479]

Cool video, time for breakfast😃

[@kellyessenwanger9800]

The definition of "up" is: "Away from the center of gravity" when you're going up in elevation you're going further away from the center of gravity on earth and that is the correct use of "up". heading north alone does not change your relationship to earth's gravity so it would not constitute the term going "up".

[@scottparker3329]

If you like Fleet Farm now you would have loved it when the Mill’s family owned it.

[@jasonturck7121]

Here comes the boom

[@michaelwpaulin4876]

I think the North is up and South is down comes from referencing a Map. I’ve always used those same references.

[@joegraffhobo-elect9128]

I've got an identical truck sitting out back, waiting for its turn to be lifted and mobilized. My Harley scrambler is mid build. But getting great ideas of where it should go.

[@rileysnyder5154]

Fleet Farm = Man Mall!! That's one of the things I miss since moving to MT (but at least we have Murdoch's)

[@hikerJohn]

That was helpful

[@chrischandler7650]

Up is north and down is south 😂

[@christopherenoch4230]

Matt, compare Farm Fleet, to RK.... I'm in West Virginia and Rural King is the biggest store in that category for me.

[@deeppowhazylab]

When that dual t case almost feel on you I winced. Had a 242 fall on my chest and I thought my lung collapsed.

[@papatomsthoughts]

Just last week I was wondering if Matt was going to work on the S10. LOL

[@samwalker1304]

Need to invent sumtin to hold the axle in when you break it for a 8.25 or any c clip diff.

[@davidblank5867]

AND BEER.....fleet farm ,that is😊

[@bleepinjeep]

Oww wow they really do have it all huh? Tractors AND Beer!

[@davidwoermansr]

Going from Custer to Rapid City might be up on the map but it's down in more ways than elevation (unless you're going on base then it's up) so down wins the majority of the time when making that trip

[@aaronb7990]

24:30 🤯 Thats a mind fk one 😂. live in the California Central Valley and usually refer to up or down ans N or S... but when you said that I realized that I also use it as Colt said. When going 'Up' to my friends house that isnt N or S but in the mountains we always say Up to his house or back Down to our house.

[@bleepinjeep]

Lol, need to come up with a new one... we are going "over" to Danny's. For east and west 😆

[@aaronb7990]

@bleepinjeep ahh, you're blowing my mind even more. When we go to the coast, we say 'over to the coast' whether it's N or S because the mountains are in the way... and we have to go 'over' them.

[@invaliduzer]

here comes the boom

[@RM-kc6qk]

Up to Canada

[@AnotherUnsociableOne]

I jumped when that transfer case nearly fell on you.

[@bleepinjeep]

Probably a good thing I didn't or I would've knocked myself out, haha

[@zsb23]

It's a DOT 5 willy!

[@bleepinjeep]

Haha, doesn't sound fun!

[@techniciantrar6923]

Don't worry Matt its easier to dunk and slap the height thingies when you are so tall bigfoot be taking pictures of you.

[@bullittdog4352]

Colt looking lean and mean and a fab’n machine!

[@arnildflowers1444]

Duck bills are the name of that bender.

[@Derf1313]

Lol, not quite. Duck bills are still snips, that's a hand brake...

[@RemingtonWelding]

Up is North thats why they call it down south haha