Just Call Me Bob! How-To Bob A Pickup Truck Bed. OnX Offroad Build Challenge Part: 10

If you're looking to shorten up the length of your pickup bed then look no farther. This is a great offroad mod that you can do to your truck following these simple DIY steps. We are making on radical S-10 from all our parts and pieces along the way and our goal is to stay true to the Do It Yourself builder in their regular garage without the fancy stuff. We hope you enjoy this video and please vote for us EVERY DAY in this OnX Offroad Build Challenge series!
**Vote Here**
www.onxmaps.co...
*********************************
Like this video? Check out these:
OnX Build Series: • ONX Build Challenge 2023
UniBody Takeover: • Cliffhanging in Moab W...
Moab must do's: • 1st Time In Moab Utah!...
Build a free crawler: • How To Build a Rock Cr...
Never do Balljoints again: • NEVER REPLACE BALL JOI...
*********************************
ONX Build Challenge Part 1: • The Vehicle You Never ...
ONX Build Challenge Part 2: • Did we BUY THE RIGHT T...
ONX Build Challenge Part 3: • How To Build A Junkyar...
ONX Build Challenge Part 4: • Jeep Suspension On A C...
ONX Build Challenge Part 5: • Steering and Wheel SEC...
ONX Build Challenge Part 6: • CHEAP Transfercase Mod...
ONX Build Challenge Part 7: • IT ROLLS!!!! Rear Susp...
ONX Build Challenge Part 8: • Matt Shows Up to Help ...
ONX Build Challenge Part 9: • HELP!!! It's Going Ou...
*ONX Build Challenge Part 10: • Just Call Me Bob! How-...
ONX Build Challenge Part 11: • Bend & Flex. We Build...
ONX Build Challenge Part 12: • Is This The End Of The...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.co...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on KZbin: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep...
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

[@scorpion2005765]

In my opinion, your build looks the coolest so far. Good job man!

[@bleepinjeep]

Thank you, I'm working hard to make it cool and fall into the realistic budget.

[@MichaelSmith-jv7zm]

That was real Douchebag to talk about your competitors just have their shocks laying around when you talk about buying yours. I'm sure they appreciate you calling them liars and cheaters.

[@Kyle-ev4fk]

@@bleepinjeep Are you going to come in under budget? I would bet at least lower than the competition.

[@trevortripsalot]

Colt, I like your guys’ build so much I gave you a vote. Don’t tell Rudy 👀. I hope in the end all of you get to go on UA. Every teams’ build it awesome.

[@bleepinjeep]

Thanks Trevor! I like your flame throwing video😜

[@trevortripsalot]

@@bleepinjeep Thanks! Next time you guys are in town we should go burn some stuff.

[@Rudysadventureanddesignreal]

TREVOR!!!!

[@trevortripsalot]

@@Rudysadventureanddesignreal @&$#! Stop reading comments Rudy. You’ve got a build to finish.

[@joshuabaker5712]

This build is like a reminder of what guys were doing when i got into wheeling. Building with minimal money and fabricating everything they could. The fact you are doing all the old school stuff and keeping it leaf sprung is way cooler then the others IMO. Yeah sure tossing some coil overs in and big axles is cool but this is like an everyday guys build.

[@lennyross2813]

Exactly!

[@cunever]

I just love Colt’s thoroughly astute meteorological observations “today the sky is not blue because it’s grey” and then simply carries on with stuff he can do something about (a quality weather doesn’t have, lol). I like the way that sums up the man.

[@timothybailey7118]

I appreciate how you painstakingly teach/tutorial through your video

[@Oldplacerminer99]

This rig is the best yet !! Super Tough build !! You guys got this 💪

[@tommyrioux2240]

Been voting for BleepinJeep every day!

[@thunderstruck1078]

You mentioned cold weather in July. Here in Europe, Croatia, we've just had a huge thunderstorm that pulled out a bunch of trees and all grandmas and grandpas say they've never seen such a storm. Love the progress!

[@Chevyv8man1]

Great video, I could watch your videos all day. You do a great job of videoing your work and I just wanted to say thank you and please keep doing it. I love the way you explain everything that you're doing and the process of it all. Others just jump from start to finish on whatever they are doing but you don't and also ;your attitude while doing it is great. In the end I just wanted to let you know that you and your work are very much appreciated . Later

[@bleepinjeep]

Wow, thank you!

[@aaronb7990]

​@@bleepinjeep💪😎👍

[@davidboisvert617]

Nice build Colt. I have been voting every day from the start of the challenge. I enjoy watching this build because I had a 1986 S10 4X4 when I was stationed at Ft Carson Co. Mine was Black and Red interior. Hope more viewers can vote to put you back over the top again. Please VOTE, VOTE, VOTE for the S10 build to win.

[@bleepinjeep]

Thank you for your votes and service😎👍

[@freeidaho-videos]

Overalls? Learned a new word, rigidify. Best build of the three!

[@geriatricginger]

well done. I fully expected you to dovetail it. LOL Colt you're killin' this build like a champ!!

[@billharlan9189]

I love the way that you shortened the bed and it will look stock when finished..

[@Compound_B_Fabrication]

I would vote for you guys if the OnX website was not a pile of trash. You deserve all the votes. Coolest build! Best story! And I would bet that you’re the best drivers, too!

[@Weidjeep]

We've been having the same freak weather here in Billings MT. My lawn loves it.

[@DaKayH]

Rigidify Is a real word. Well, I learned a new today. Thanks BleepinJeep. I like this because I have this exact same S10 .

[@chuckieswickedgoodfab]

Great Content!!! Slick move with the extra drive shaft and thanks for the bob bed tip using the backing for welding sheet metal!!!!! Thanks again Colt.

[@jasonlavery6449]

Hey buddy I am in your corner always. I like that you do your truck like a real guy with no fancy shop and equipment. Thanks for time you spend on the videos.

[@Derf1313]

Gonna have to show this to my son. (He just sold a Ranger back to the original owner. He hasn't been able to work on it, he's now got twin baby girls, lol!). Always liked the looks of some of the S-15's, but fit better in a full size, lol! But, trying to find anything that's not a rust bucket here in W. Mich, darned near impossible. Great build, definitely shows some forethought in the rig! Thanx !

[@strykerentllc]

You should have a TV show on Motor Trend or Discovery Channel. Such an easy going dude that takes the time to explain the reasons behind your actions for the average guy that doesn't have the knowledge and experience in building off road rigs. Cheers!

[@grenobel]

That thing is looking total badass - definitely the sickest build of them all.. I really hope y'all make it.

[@MarkoMygun]

That S 10 is totally cool lookin and I belive it's gonna do great Colt.

[@ben67jeepster]

I live in Duluth Minnesota! Thanks for the shout-out to our local company 😂

[@DeanJohnson67]

not gonna lie! I like all 3 teams equally so I vote for each team in a rotation! Would be cool to have a winner AND a plot twist that all 3 get to go to UA!

[@rweasel801]

That thing is looking Bleepin awesome. Great job colt, and contributing to the advancement of the English language while you're at it; "rigidify" definitely gonna be using that one.

[@jtcustoms1182]

Colt, all I can say is your killing it. Time to by an s10 again.

[@TheBibleExplorer]

Brother, that's one cool ol' S-10... Can't wait to see it on the trails 🤠👍 O ya, really like the driveshaft storage...

[@carlnewby5963]

Love the factory bumper! That’s sick!

[@charleytodd5792]

Love the stock rear bumper

[@chiefvilla3167]

Looking cool bud. Good job dude. Especially for one man one big man.👍🏽🤟🏽💪🏽..

[@papatomsthoughts]

Love how you think outside the box, like driveline. Also, you not thinking like an engineer, planning how to get tyranny cooler out easily. LOL

[@tyrel8613]

Hell yeah bleeping colt keep it up I hope you get picked I love watching your's and Matt's video's keep up the amazing and awesome video's

[@harryellis8873]

Your getting like Paul from fabrats he loves cutting the bed and adding bits on good luck with your project

[@joeeyman7503]

Respect for the overalls! Love mine, never have to do the pull the pants up while working! 🙏❤️😎🤙🛻💨

[@DinkAround]

You all have the best rig, hands down. Stayed in budget, built the best rig, worked the hardest. Hopefully you go to UA. Vote submitted

[@billclisham8668]

Congrats on the win to the UA ! I love how simple and well thunked out this rig is. The two thinks I like best are the leaf springs and the 4.3. I think the 4.3 is the most under rated engine for off roading. Having watched Jeremy Rose wheel his leaf sprung CJ8 I forgot how well they actually work off road.

[@thunder_lloyd]

Love the stock rear bumper! This thing is coming out so good

[@kennethmedcraft9721]

The rig looks great hope you get in

[@seanlaskey2873]

Coveralls have the sleeves, those are Bibs! Lol Love the content, good luck on the contest!

[@Bryanja81]

Thanks for the video! I always learn something new watching your videos. Much appreciated.

[@apache6167]

😂 Fighting Smur 😅 I was wondering where Matt was... 👤

[@1nf1d31]

Great build! Also love that your building this rig how any of us would have to and thats without lifts!! Ive voted for ya'll love the build and Bleepin Jeep!!

[@SuperDad1776]

Vote for Bleepin Jeep!!!! This rig an team needs to win!

[@bobwarcimaga451]

Most honest of build parts and budget

[@doug9418]

Come on folk's we can make up the 521 vote deficit over night if we all vote, Colt has been working his a** off on this and teaching us how it's done with Minimal tool's and workshop. 🎉I take my hat off to Colt for his hard work done so far. 😊

[@bleepinjeep]

Thanks Doug

[@Digitydan]

Went to vote, had to create a an account, created an account, voted, says I need to login, logged in, voted, says I need to login, logged in, voted, says I need to log in, gave up. Sorry, I’d like you to win.

[@lanetpickett]

that truck is so sick! I wish I could hang out with you for like a month and learn some cool stuff. We could make my 79 toyota pickup way sicker than it already is. cool video man keep making cool stuff. big ups and keep being awesome your fans appreciate it.

[@87sport]

By far, the best build going in this competition. Props

[@dezfan]

My favorite OnX build by far! 👍🏼

[@bleepinjeep]

Thank you, I'm trying to make it awesome

[@deshb22]

By far the best build IMO. awesome job

[@SammyTheDitchDoctor]

You deserve this. By far and away you’ve put in the time with the off road community, have the talent, imagination and have built some really cool rigs. I’m voting daily.

[@bleepinjeep]

I appreciate that!

[@raullasvegas]

Voting for you every day Colt. 👍👍 Everyone else would have just thrown that driveshaft in the bed. I appreciate the thought you have put into this build.

[@nickyduhr8355]

I like the placement of the exhaust!

[@JeffJones-om2nh]

Hey Colt, the Duluth Trading overalls and britches are great stuff. I myself enjoy the relaxed flex fit stuff. That prevents those untimely crotch rips and such. I'm embarrassing enough, I don't need anything else contributing!! 😂

[@johnnymack8442]

I like this build. Good luck hope you guys win!

[@dimensionsoffroad]

Dude you’re killing it on the build! All the builds are cool, yes… but you played by all the rules, (def made me laugh when you didn’t happen to have a set of $3k 2.5” FOX IFP coilovers “laying around”) lol) hence followed a real budget, and used your skills as a fabricator and thinking outside the box to bring a build that is not only unique but absolutely proved something super capable can be built in a two car garage with minimal equipment and expense! You got my vote 👍🏻

[@ludercoarms]

I almost always use flux core wire. My welder can use either one, just have to swap a connection. The reason is every time I weld with gas, I always run out of welding gas after hours or on the weekend, and there is nowhere to get any gas except during normal weekday business hours. Problem with that is I go to work several hours before the welding supply opens, and get off work after they close. So I have learned to use the flux core wire and make it work well for me. Y'alls build is coming along awesome!! So many people do not appreciate the comfort of a good pair of overalls!!

[@one-WildCard]

You got my vote! Definitely the coolest build. btw, if we ever have a WD40 shortage, we know who has them. LOL!!! Cheers!

[@kurikuri4sherm]

Great choice keeping the factory rear bumper! Looks awesome!

[@bleepinjeep]

Thanks! 👍

[@justins.1991]

my fav build. that thing is going to be wicked when its done

[@EvanMoon]

So sWEEt. Definitely the best design vehicle.

[@davidmech2956]

That bed came out mint

[@user-wn6wo6kd5o]

Enjoy the videos. Good luck with the challenge .

[@tomhubbard353]

I have been welding sheet metal with my big MIG with .030-.035 wire. Tack tack tack tack for days. My buddy had me come over to his shop to weld in a new floor and some body patch panels in his truck. He asked me to help him set up his little Lincoln MIG so we went with .020. WHOLLY CRAP You can damn near weld like you do on 1/8 plus plate! After 25 plus years of using my big welder for everything, I now want a little zapper box (gas not inner shield)for sheet metal only. So freaking easy and way faster!

[@cole33333333]

I would love that weather, todays high here 118°.

[@MattBrownbill]

I have 14 240v sockets in my garage. Lol. UK ring-main for the win 😊 🇬🇧

[@mudslinger995]

Great video Colt, love the play by play of what you are doing. I love the way you show how the work you are doing can be done in a "low budget" shop as a hobby. You have my vote.

[@BlackAndBlueGarage]

looks good buddy, speaking of more than one way to skin a cat. I Bobbed the Comanche with the bed off and standing up on it's front. Had to take 24 inches off of mine!

[@tonypatrick9362]

Awesome video thanks lots of information this is a cool truck

[@joshuajohnson4800]

Love the stock bumper.

[@delinquentdesign]

Colt! You should hardwire your compressor with a disconnect box and free up your other 220v plug so you can keep from wearing your 220v outlet out.

[@beaker2000]

That is an awesome truck you are building.

[@paullinkie4661]

you are real. keep up the good work

[@423gamble]

I need this when yall are done with this! I want to go riding

[@vetguy2562]

Colt, that's awesome, one of my favorite trucks, and one of my favorite modifications 🤘😁

[@taylormade710]

Love the S-10, can’t wait to see it on the trail.

[@stevectl1]

Love this build looks good, I had the same truck in high school. My brother dad, and me painted it and I put a 305 in it from a Monti Carlo. I thought it was the fastest thing in the world, lol. I think they make 4 bangers now with more horse power.

[@kaneb221]

Dude! That driveshaft carrier is fucking ingenious! That shall be incorporated in my future builds! Thank you for all of your invaluable knowledge!

[@karena-keithjensen6662]

Colt I appreciate everything you have shown on this build. Thank you for everything. You have my vote. I hope you make the U.A. This year.

[@LaDonnaShielded-kc7zm]

Bleepin amazing work Colt. Can you put a picture on KZbin community page? Voting daily💥!!! S10's rock❣️

[@YouTubeBinging]

Sometimes people are born specifically for things. Colt is the man.

[@stanleyhall6102]

I can see alott of forward traction to be had with just some simple grooving and give you just that 20% percent advantage to walk circles around the competition 😂

[@michaelwpaulin4876]

Very Professional in your presentation. Great Video, your Rig is Looking really Sharp. MWP, Cosby Tn.

[@abnpthfdr2934]

This is just the video that I was waiting for. When you asked, I voted for you to leave the wheelbase as is and used the money for other things, and suggested to use that time to bob the bed instead!!! I'm glad you did it! The S-10 looks killer!!! I love the whole set up. Can't lie, out of all three vehicles I just couldn't put my finger on what you could do to the S-10 to make it a competitor against the others, but I knew you had some tricks up your sleeve and it you're putting them all to work!!!

[@larryhollifield9607]

That is a COOL S-TEROID 10

[@Nicco.L]

Rollcage on the outside of the cab 😏🤩

[@kryan318]

thanks for explaining what you are doing

[@tjtobin86]

Love the build! One thing that I'm sure you are aware of, but is worth pointing out. Flux core is a strong weld (with the right settings obviously) and can be used for structural supports. Since it works well in windy environments it is often used by farmers for repairing gates and fences. Again, you are clearly someone who knows this and was just saying what you said to keep from getting hate comments about welding your rig up with a low amp buzz box.

[@pornstar2469]

Sure hope you get to go to the ultimate off road challenge your building a cool truck the way we all had to at one time .

[@timlandegent3536]

Rigidify!!! Looking sweet. Was wheeling up in your neck of the woods last week.

[@codyhowell1]

I am a Lexus/Toyota guy through and through so I have a little bias towards the Dumpster fire build, but this build honestly might be the best so far! Good work!!

[@bleepinjeep]

I appreciate that!

[@Wooolfey]

Great build!!!! Love the way this is going!!

[@isomer13]

I vote as much as I can(or as I remember.) At any rate, at least 3 times a week-and I'd vote more-but sometimes it just won't take my vote. Dunno why the site does that. I was under the impression you could vote once a day.

[@spacekb17]

I think it might have a 24 hour rule. I've ran into that when I vote late the day before and try early the next day. The site isn't perfect

[@danielcotts8673]

Yes, You can vote once a day. I've had votes rejected. Just tried again several hours later and it worked.

[@bryanstephenson2313]

You can vote every 12 hours, I have been doing it since the first day.

[@jamesdecanteur4485]

I vote almost every day and only once would it not take my vote

[@woodstk70]

Looking good Colt. I have been building an 88 S10 Blazer, started in 2020. 4 link rear and 3 link front on 1 tons and 40s. Hopefully have it done soon.

[@princ3ssros340]

118* in Phoenix I would love 50* any day! Starting to look good 👍

[@stanleyhall6102]

Would like to see those tires . Grooved

[@matty86suk]

love this build!!

[@Kyle-ev4fk]

I'm diggin the build. Great job!

[@jvcajw1]

DOUBLE THE POWER! Add a second 30 amp 220 volt outlet right next to the current one. There is no need to add a new breaker or circuit. Just don't run both the welder and plasma cutter at the same time. I do this myself, and it works great. Weld, then plasma cut, then back to welding. No more changing plugs back and forth. Cool build. Seems like a lot of work, time, and money for a rock crawler. I would think you could find a vehicle that is mostly done, or has a lot done already...

[@SteveInGear]

But then we couldn't see all the cool fab work.

[@Crewsy]

Looking great Colt. I hope you maintain the stock appearance of the front bumper and utilize what you can around that Barnes winch mount. I’ll have a look on Instagram to see what you did.

[@jhawk1985]

I grew up in the 80s and loved the ninja turtles. The diff cover is cool 😂. Always loved square body chevy's too and this truck is gonna be so nice. The wheels really look great also