Blending Made Easy With Axalta

[@juanmata2433]

Another awesome job sir!

[@everyday_painter]

Thank you!

[@donproctor4480]

Looks great as usual.

[@everyday_painter]

Thank you

[@ChadHendrickson-s4z]

Any reason for not putting color on the front hood edge and upper bumper edge? That way color would match as good as it would get

[@diamonddetails9445]

Genius 👀💯😎👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@markperez6195]

How does one know how long to extend the blend coverage from the repaired substrate?

[@draghixa]

Thanks again, learning a lot from you!

[@everyday_painter]

Glad I can help! Thank you for watching!

[@JohnWD40TC02]

Hi Mick lovely job on the finish mate it came out looking mint. I've seen some people lay their drop/effect coat after last coat is flashed off but you do it while it's still wet, as you know I use a solvent basecoat scheme and I find that if I let the last coat flash then do my drop coat it feels dry but doing it while wet it feels so much smoother but I've always been told to let solvent base flash before the drop coat, does it really matter which way I do it? Sorry for the long comment but I'm just a hobby painter wanting to learn and do it properly🤔🙏👍John UK.

[@thatdude3832]

I'll be bringing you my car soon!

[@kr2513]

Either not all waterborne systems are the same or you have your own way of doing it. I know people who spray Sherwin 9k and they almost have to dead stop each pass to blend or it will send big rocks everywhere. I hear envirobase is the same. Either way very nice work as always. Wish I could slam it on like that

[@everyday_painter]

Not all waterborne is the same. Axalta is very thick and has a “clay” like binder which allows to be slammed on the way I do. Also the wetbed I spray before my basecoat helps prevent any sand piling you are mentioning. I only flick the way I do with this system. I don’t spray this way with any other system. Since this paint is so thick It halos easily and is better to be blended out this way. I used to spray sikkens autowave which is essentially the same as envirobase. Great system. Takes multiple coats to cover like most other system. You should tack between each coat to avoid any sand piling.

[@claytonparkhurst4328]

Sherwin kinda sucks. Not gonna lie... I used the awx waterborne system. Worst paint ever!

[@kr2513]

@@claytonparkhurst4328 awx is toast I believe, and yeah they are or were being sued over that line.

[@kr2513]

@@everyday_painter clay like binder! It never ends the weird stuff I learn every day thanks.

[@everyday_painter]

It’s not completely thick like a clay. But it is thick. When the rep explained it to me he said there is a type of clay in the binder which allows the basecoat to set on the panel without running. After being spray on very heavily.

[@claytonparkhurst4328]

What pressure for kiwami 4? 29?

[@everyday_painter]

Around 25 or so. I don’t use a regulator so I’m not sure exactly. I’m getting one though so I can show what I spray at.

[@ANDY-we7mr]

You haven't again put the settings on for the guns the kiwami 4 for the clear really helps people out on you tube who are just learning how to spray cars and body work

[@everyday_painter]

Still have a few videos pre recorded that I didn’t mention my setup. I will start saying it in my new videos. But there will still be a few coming that don’t mention it. I can put it in description for now though.

[@ANDY-we7mr]

Just subscribe to your channel iam going to paint my bumper later on ford focus mk3 front its say its already primed will I have to put a blend on it or just the base coat and 2 coats of clear coat paint

[@everyday_painter]

For a new bumper that is primed I would do a coat of sealer first. Then basecoat. Then clearcoat.

[@ANDY-we7mr]

@@everyday_painter so no blend to match the car

[@everyday_painter]

You can blend the fenders if you want to. But if you have a good color match you don’t have to. When we do bumper replacements we don’t blend the fender unless there is damage.

[@JulianHiram-y9k]

Rodriguez Sharon Rodriguez Dorothy Walker Nancy

[@claytonparkhurst4328]

What pressure for kiwami 4? 29?