Blitz Freezer 2.0: DIY Miracle at -24°C in Half a Minute || Mini Fast Cooling Air conditioner AC

Subscribe to Mr iPoo : bit.ly/3FrUgsT Become a channel sponsor and you will get access to exclusive bonuses. More details:
/ @mripoo
----------------------------------------------------------------------------------------
In this captivating video, we present to you the most amazing and useful life hacks that can significantly improve the quality of your life. Get ready for mind-blowing ideas that will make your everyday life simpler, more convenient, and more efficient.
----------------------------------------------------------------------------------------
TIMESTAMPS:
00:01 - Demonstration of the effective operation of a homemade rapid beverage cooler. The temperature reaches -24 degrees in just 30 seconds!
02:01- Make 2 capillary tubes. A thin copper tube with a diameter of 1.2 millimeters will serve as the capillary tube.
02:42 - Make the condenser. The condenser is a component where the hot gaseous refrigerant, having passed through the evaporator, condenses back into liquid.
05:13 - Connect high-pressure silicone hoses to the copper tubes.
06:52 - Make sure to use high-pressure silicone hoses.
07:05 - Look at how amazingly simple it is for us to create a very powerful, small, portable beverage cooler.
This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability.The following video might feature activity performed by our actors within controlled environment - please use judgment, care, and precaution if you plan to replicate.
◉ TikTok: / mr.ipoo
◉ KZbin: / @mripoo
◉ Instagram: / mr_ipoo
Let's unleash your inner builder and craft amazing projects together. 🛠️

[@paulcole1171]

This is a load of rubbish the unit would not last long as a Fridge Fitter myself you have to vacumm all moister out of the system which he does not and in the end the water will freeze at the capillery tube plus he is using water pumps so the gas will leak out of the shafts and it will not work in the end.

[@clownbooface2624]

Those are small diaphragm pumps, ice wont form too low pressure, this just works on pressure differential hence the small capillary, suction side cold pressure side hot, the same as how compresed air discharge hose gets cold

[@olegschwengler]

Предположим, эта система работает. Можно установить клапан и этим же насосом выкачать воздух из системы. А чтобы не было влаги, установить осушитель. Насос долго не прослужит их за пластиковых элементов, в этом вы правы

[@VitaliiKovalev-xb3tq]

Лайк огромный за видео

[@vmakwana46]

Which type of motor is that, to pump gas

[@MR-Nitro]

You guys just keep saying that this is fake and no one tries to do it, I'm going to try to do it, I just need to buy the gas, then I'll prove if it's true because I already handle this gas and it produces ice when in contact with metal.

[@purple___skys_612]

True

[@3xP10d3R]

Q:Why nobody has a patent of the invention? A:Because its fake..

[@maXms_RD]

​@@3xP10d3R Lol 😆 u need study how a fridge compressor works

[@3xP10d3R]

​​@@maXms_RDyou just need to know how to edit a video to make it appear it goes forward instead backwards.. And this is the case.. 😂

[@maXms_RD]

@@3xP10d3R lol am saying about it works not like this much speed

[@RedMoon-666]

Cyдя пo прoисходящему aвтop являeтcя пeтyxoм, который любит реверсировать видео.

[@GunaSatu-uj2gn]

Condensor is not hot

[@cloud-dragon]

Why do you need the fan at the top? I thought it should blow excess heat from the base tubes

[@cloud-dragon]

@@brlinrainf Well, I don't think it's fake - it's definitely works. Even if it's incorrectly designed. I suppose everyone i simply copying AC version of it where you need a fan to cool down the air :) I just thought maybe I don't know something author knows) Because otherwise I'll need to build something like this myself to compare results :)

[@neodiy]

please do and lets see how it goes@@cloud-dragon

[@danwyan]

So the base is only used to store the excess hose (and the secret refrigerant line coming from under the table)?

[@IasonPetridis-ng3ve]

No need for tricks. This works. It's a mini refrigerator. Butane ,is great as refrigerator liquid.

[@danwyan]

@@IasonPetridis-ng3ve Well, of course, butane is used as a refrigerant (R600A), but won't do much without the mini fridge compressor under the table. How many fingers am I holding up? ✌️ (This guy wants you to say three). Don't believe anything you hear and only half of what you see.

[@IasonPetridis-ng3ve]

@@danwyan He uses a pump as compressor and it"s enough. I don't believe everything i hear ,that's why i don't believe you. I believe only what i know is valid , and this is a simple refrigerator and it works.

[@danwyan]

@@IasonPetridis-ng3ve ok, let's see your make of it. I won't wait since it won't happen (without a hidden compressor).

[@IasonPetridis-ng3ve]

@@danwyan Man , believe what you want. It is working, he is using pumps as compressor. It' s the same thing. Compressor is a pump , please go to school to learn that. He is using butane, he don't need high pressure. No need for compressor under the table . The compressors are on the table in front of your eyes.

[@fluffybutt38]

According to other web sites this is fake.

[@onklim3132]

He doesn't understood about heat pump cycle.

[@ercankoca7907]

dalavere baska birsey degil. motorlarin giris ve cikislarini ayni bagladin birbirlerinden emiş yapmaya calisacaklar bu sistemde gaz nasil donecek?

[@Gambiarte]

The fan in that position makes zero sense as it is heating the beverage. Something is wrong...

[@samuelfellows6923]

= fraud 😠

[@eliasbinislam22]

how to gas charge! without vaccuam?

[@andyplage6590]

Poorly is the Answer 😅

[@rawat_khatli_se4518]

These are water pumps not compresser

[@GunaSatu-uj2gn]

Ethanol more cold than butane gas

[@biker_one208]

So wie der Lüfter plaziert ist entzieht er dem kalten Bereich die Kälte. Offensichtlich wegen des Luftspalt und der daraus resultierenden geringen termischen Kopplung zur Getränkedose. Soll wohl die Kälte auf diese Art übertragen.Üblicherweise kühlt man die heiße Seite, isoliert die kalte Seite und sorgt hier für eine gute Wärmeübertragung. Ansonsten handwerklich gut gemacht.

[@larshoernle5400]

Danke! Hab mir genau das gleiche gedacht. Aber find spanned, dass die Verengung im Kupferrohr schon reicht um wie ein Ventil zu wirken.

[@hoctin1875]

What type gas you use in this your system ?

[@NamaAku-sl5gh]

you can try is bigger for mini air conditioner using 30 watt pump

[@gregorykusiak5424]

The “canned air” people use to blow dust off/out of electronics can also be used as a coolant. You do not need as much of it as you might think.

[@ambush427]

How do you expect the pump to produce enough pressure for refrigerant to start react?

[@davidekay5869]

how many roosters?

[@andreaskubacki4203]

Hat das einer schon nachgebaut?

[@MiguelDeMarchena]

how about design a mini-fridge using one styrofoam cooler ?

[@Ansatt666]

Are you sitting in a damn chicken coop?

[@АлексейГолованов-ь1р]

В холодильную систему впаеваеться вилосипедный мипель, и можно заправить обычный холодильник, или любую другую холодильную систему и этот газ будет работать, проверено лично.

[@arashfarvardin]

can you also show the direction of the gas flow and the overall schematics of the pipes?

[@CadillacUnautorthorizedservice]

Ya how we even gonna find a pump for that. There is no info for the pump anyplace I can find

[@radioactive4388]

I am in the process of making this, its just a simple air-conditioning set up , oh and the comments are more entertaining than the vid it self 😅😅😅

[@amper66c.d55]

woooow that's freezing. This is the invention I want to make for a can of Coca Cola. thanks friend for the video 👍🏻😃

[@davidekay5869]

yeah the balcony on the executive, lamest floor

[@GunaSatu-uj2gn]

How long does it last and doesn't burn?, Please answer

[@samspade975]

All of a sudden I fancy a nice chicken curry

[@MyMusic-nu3wh]

Time lapse + rewind and its works! 😂

[@FrankenLab]

@mripoo What other refrigerants can be used?

[@kadriiddrisu9694]

Nice work, please what is the diameter of the coper tube

[@gilfran644]

Tu devrais faire plus esthetique,!!!!!!

[@mihailkolesov2902]

Да, это будет работать. Только ещё воздух из трубок выгнать, будет безопаснее.

[@jzherry9841]

Can u make ice cream roll machine 🙏

[@arvilblank4842]

Did you check the power consume ?

[@GunaSatu-uj2gn]

You can try is biger

[@davidekay5869]

gold, silver, btc...

[@chansam2675]

Convert it into freeze dryer

[@caagudelor]

Hola, gran proyecto. como acondicionarlo para tomar la humedad del aire y recuperar ese liquido.

[@ThexBorg]

Why aren’t the plastic tubes frosting

[@gennadiy.1981]

Потому что силикон и пластик нейтрален к перепаду температуры, у них очень низкая теплопроводность, поэтому на их поверхности не образуется конденсат.

[@wawerukamau1260]

That's condenser side of the of that refrigeration system.

[@luislopez-pf5fi]

f

[@CyberPick]

This one is amazing, and with butane gas :o nice work mister.

[@Qiasky]

This is the DIY process: DIY refrigeration systems involve some complex engineering and safety considerations, especially when it comes to refrigerants. If you want to use butane as a refrigerant, you need to ensure that you have the relevant knowledge and skills and strictly follow safety protocols. Below is a basic outline of a DIY refrigeration system, but please note that this is just a conceptual example. Specific implementation requires deeper understanding and professional knowledge: 1. **Materials and Tools Preparation**: - Butane refrigerant: Purchase high-purity butane refrigerant. - Compressor: Select a small compressor suitable for DIY refrigeration systems to compress butane gas. - Condenser: Used to cool compressed butane gas into liquid form. - Evaporator: Used to absorb heat during the refrigeration process. - Pipes and fittings: Used to connect various components. - Temperature controller: Used to control the operation of the refrigeration system. - Insulation materials: Used to wrap refrigeration pipes to reduce energy loss. 2. **Design of Refrigeration System**: - Design the overall structure and parameters of the refrigeration system based on the desired refrigeration effect and scenario. - Determine the size and specifications of the compressor, condenser, evaporator, etc. 3. **Assembly of Refrigeration System**: - Install the compressor, condenser, evaporator, etc., and make corresponding connections. - Use pipes and fittings to connect various components to form a closed-loop refrigeration system. 4. **Filling Butane Refrigerant**: - Fill the refrigeration system with an appropriate amount of butane refrigerant according to the system's capacity and design requirements. - Pay attention to safety operations to avoid butane leakage and fire hazards. 5. **Testing and Debugging**: - Start the refrigeration system, observe the operation of various components, and check for abnormalities. - Use the temperature controller to adjust the operation of the refrigeration system, test the refrigeration effect, and debug as needed. 6. **Safety Precautions**: - Ensure that the installation and use of the refrigeration system comply with relevant safety regulations and standards. - Avoid butane leakage and fire hazards, ensuring the safety of the refrigeration system. - Ensure proper ventilation to prevent the accumulation of excessive butane gas indoors. It is important to emphasize that DIY refrigeration systems involve serious safety issues, especially when it comes to refrigerants. Butane is a flammable gas, and incorrect use or operation may result in serious consequences such as fire or explosion. Therefore, before attempting a DIY refrigeration system, be sure to thoroughly research relevant knowledge, understand safety operating procedures, and ensure that you have sufficient knowledge and skills to safely execute the project. It is advisable to consult with professionals for guidance and advice.

[@SweetLemon13]

me pergunto a real eficiência disso. realmente funciona? sim? entao porque não tem pequenos refrigeradores para comprar? parece ser um sistema que pode ser bem compacto se for produzido para mine refrigeradores, ar condicionado etc.

[@stanleydiias]

É Fake! Já tentei reproduzir o mesmo projeto e sem sucesso!

[@SweetLemon13]

@@stanleydiias é complicado, ta cheio de gente desse tipo na internet.

[@isuruvfx4377]

​@@stanleydiiasI've seen so many people doing this from few months. Is that actually fake ?🤔

[@MR-Nitro]

@@stanleydiias You guys just keep saying that this is fake and no one tries to do it, I'm going to try to do it, I just need to buy the gas, then I'll prove if it's true because I already handle this gas and it produces ice when in contact with metal.

[@amper66c.d55]

Amigo esto va a cambiar la industria de la refrigeración. Se podrá hacer pequeños enfriadores con poco dinero y van hacer más económico. Este mini sistema de enfriamiento desplazará a las placas peltier 👍🏻

[@aransmitch]

I'd like you to try using air freshener or refrigerator liquid. Try doing it and see what the results will be?

[@Elijah-n6s]

This is absolutely not fake, the lighter fluid has the cooling agent in it. When pushed under pressure circulating the copper line a crude air-condition effect happens. Spray some of the gas on your hand and you will gill the cooling effect he is using. It's a genius way to cool something quick.

[@hybridgaming9490]

How much pressure do you think a 6v or 12v water pump motor could generate

[@slimel-gharbi8170]

thank you very much sir !

[@mohammadzare9927]

thank you 🙏 is it ok to use aluminum pipe instead of copper? ❤

[@a2zvalley363]

Nice

[@norbertk.1473]

👍

[@andreiandrei1537]

👏👏👏🤗😘

[@bunnyenergetic3142]

Suuuuper .

[@MrMorgalis]

good work

[@โดร่าเอม่อน-ฦ6ย]

What the gas

[@โดร่าเอม่อน-ฦ6ย]

Lighter gas or not

[@edificando1172]

Hola , que tipo de gas usaste para inyectar en las mangueras. Que tipo de motores usa este sistema. Y por último el gas que le inyectaste no se fuga?. Saludos 😊

[@mariquevandermerwe8516]

u stay at a farm or zoo