Blown amp, welded door and setting gains

[@BassTheExplorer]

Thanks Jerry for setting my gains. I had a blast hanging out with you Debbie and Duston at the shop. Fun times

[@JerryAintloud]

Always bro.

[@randyhauss6842]

mount them fans in some foam that fits the window opening and paint it black. roll the window down and put fans in and roll the window up. with it sealed they should pull more air.

[@WAGONMAFIAMUSIX]

Jerry u ah man of all trades

[@eighty3boxchevy]

That’s what I’ve been doing lately. Money tight so I’ve been using stuff that I have around the house. I was stressing over buying tweeters when I had 2 pairs sitting here. Made some rings so that they’ll fit and now I’m happy. They’re still temporary but at least I got some

[@laska4075]

Hey FYI, welding sparks burn glass. They will leave little pits and pores that’s going to make the windshield compromised. It might make it blow easier. And you should always remove power and ground from the vehicle when you weld on it that shit will below 12 V equipment to smithereens it will backfeed through your amplifiers head unit electronics. All types of stuff can kill ECU very very bad, always unplugged, power and ground to the vehicle when welding.

[@sethgt1234]

Sounds like a bad ground or a bad set of RCA's that are causing the pop.

[@Basshead_Pyro]

Take a torch and heat up the end of the cables and slap a dab of solder on the ends to keep the wire on the weed eater from fraying/un-winding brotherman

[@chefleon2967]

Yay I got a indirect shout out lol😂 can wait to meet yall

[@skyrimdragon250]

Looks good do what ever you can to stay cold

[@1ohmwrecker]

I use that chemical guys tire shine. The blue stuff. Doesn't fling, and stays on for 2 or 3 weeks. Stuff is awesome!

[@timcouch5005]

Been so busy lately not enough time to work on my own stuff ... I miss it ...thanks for the fix..

[@nofksgvn85]

Check out the terminals on the horns one could be lose or bad

[@JerryAintloud]

Nope

[@buddyardis1400]

Cover the windshield!

[@coreycaplinger9747]

I was thinking about a cool, kind of unique build for the channel and I believe you can pick them up fairly cheap.. a old milk truck lol, we have one at my job and I always look at it and think it’d be an awesome bass vehicle.

[@Slumericannandit83]

When u welded the brace u popped that apocalypse amp you got to disconnect the battery from everything when welding buddy

[@JerryAintloud]

Nope It was acting up when I pulled in

[@z1berzerker]

Check your horn resistance... could be out of standard compliance aka not the proper resistance, it could cause the popping you mention

[@daminhansford755]

Check the crossover or DSP go directly and see if it persists

[@SteveHughes-fo7lu]

Do u unhook the battery before u wield ?

[@cowboyexecution3642]

Paul got it going on 💯

[@martystephens6929]

Nice save on the door!!!! So the question i have for you is what made you choose 8’s and horns for the doors instead of a different size and tweet, and the amp size that you put to them? I am up in the air on what size i want to run in my truck, have never had anything bigger than a 6.5 and only 1 at that. I want it loud but clear more than anything. Thanks for your videos and say hello to the crew and see you on the next video🇺🇸🇺🇸🇺🇸🇺🇸

[@JerryAintloud]

The 8s have more mid-bass and I don’t like tweeters, horns sound 100 times better

[@martystephens6929]

@@JerryAintloud since you are basicly a single cab, are you useing just the front rca from radio or are you useing the rear set on any part of you build? Thanks

[@worldwideteambasscatdownri6963]

Jerry found Towelie. Oh no poor Apocalypse amp. Sweet Jerry got more tire shine. HI MR BIGALSWORTH Much love buddy. 🔊🔊🐈 Mr. Bassin' Bigals.

[@jermainephillips5179]

Steel cable unwinds over time on the weed eater.ask me how i know...i gotva blade for hd shit lol

[@JasonWW2000]

Hmmm, maybe a spot weld at the end would be enough to hold it together?

[@djjermagicstick]

you can flip amp and take top cover off and flip i think so if not take ds 18 logo off and flip it lol with heat gun and re glue it

[@JerryAintloud]

Then the power wires won’t be long enough 😢

[@martystephens6929]

What kit did you use on the steering wheel? I want to be able to remove mine also

[@JerryAintloud]

Cheap stuff from eBay

[@christophermcbride3284]

hey j I was looking for tht site for c max cause I'm doing my research on wht I wanna get but good video

[@jacobclark89]

I tried cable weed eater string , when it breaks off it will stick in you !🤕 I don't know if it will fit your weed eater but I upgraded my DeWalt 60v to a Husqvarna t35 after market bump head , I recommend,

[@HuntJ62]

Sucks i cant go to sundown this year hopefully i can make it next year

[@anthonykilts6953]

U said it yourself the positive wire was rubbed thru you shorted the amp out

[@CarAudioEnthusiasts]

i was thinking the same thing

[@jermainephillips5179]

Thats sucks when you replace a amp and have to re configure your speaker and power wires..tad short..the story of my life lol

[@jessebeatty9696]

Is that amp made in Brazil I know some of them you can’t have power going to them with out some type of load on it

[@NatelFacility]

mow that grass jerry!!!

[@buddyardis1400]

Did it happen after welding? A welder can fry shit for sure

[@JerryAintloud]

Before

[@skyrimdragon250]

: Yo Jerry I got a question I’m starting a new build for my car going 6th order I got the back port dial but idk what to do with front I’m playing low like you but my builds single 12 1:5 ratio 6th tuned to 17 in the rear it’s between 27-25 cube front haven’t done math for bracing and stuff I want it to be big enough for me to fit thru but not tuned to high to where it hurts my lows if that’s even possible

[@highgoals4204]

Isn't that amp supposed to be black like the rest of them? It looks like it started to get real hot and faded out.

[@JerryAintloud]

Yup been like that for a month or so

[@aaronbigbie431]

Jerry me and my wife do decals if you need any work done

[@aaronbigbie431]

Also shirts hats coozies or anything else we can press on

[@74midwestbass74]

👍👍

[@anthonydunn4613]

debs sis said hi lol you know her lol why....🎉🎉🎉

[@anthonydunn4613]

we still speek some

[@anthonydunn4613]

my 2 12s agint your big heavy 😢

[@fusion82]

Yooo

[@davisben75]

Rca's

[@Kylerad98]

Does that s10 have fucking bmw rims??? That’s dope if so lol

[@gorgonismztruth1551]

DEAFBONCE amps suck I had one that WAS DOA

[@lee28.78]

Can you please put up a link for those fans Please And Thank you J