Broken Swivel Vise Restoration

Hello. In this video you will see how i restored this Broken Swivel Vise.
This project took me almost
5 days to complet.
Thank you for watching
I hope you like my work and the video.
Donation for new tools - PayPal: [e-mail]
#Restoration

[@dumitrucolcova8164]

This vise will never resist to a real strong work.She will broke again at the first serious usage.Well, your vise is just like my English.

[@missionpassed4584]

These videos always make me feel lazy, rather than doing it myself I'm just chilling here in my comfy seat with a coffee watching someone else doing all the hard work lol

[@ChristopherSalisburySalz]

That is the beauty of it! You get to feel like you did something without the mess and frustration.

[@bigsem32]

This tool is now ready for exhibition only, not for work!

[@davesherwood5500]

After seeing that welding job, I can understand why you didn't show clamping of anything. No Dude, Cast Iron Rods are available for Arc welding from just about every hardware store, and pre-heating and chamfering of the casting is a must, that job is not gonna hold.

[@MrBucala]

Plus, use of some Loctite instead of grease on the screws, some washers on the hold down nuts, the jaws have zero grip, and do not match on the top. C+

[@carlmcgee1623]

And the SICK metal achievement award goes to YOU !!! Outstanding !!!!!!!!

[@philosov]

Смотрю и вижу напильники, которые делал наш инструментальный в 70х, потом до боли знакомый ккуглый напильник, АГА а в конце на тисках ГОСТ ну ёмаё знакомые детали из СССР. И еще резанул глаз электрод с медной проволокой, как меня учил старый мастер, но он же говорил что это бесполезно., ибо как новый не будет...

[@user-co2db4ih6x]

Такая же хрень, точили плоскогубцы, отвёртки,зубила и разную хрень, напильники тупые как преподаватели, аж руки до мозолей стирали.

[@wielowieprzwieprz1637]

Looks noce as display Item. Unsuitable for heavy work. Chamfer for weld not been made, not been properly preheated and cooled.

[@desmondvater8220]

@jameshisself 5 t give#

[@dirtfarmer7472]

I agree with you, just a nice table decoration

[@user-yk9pw1gr8w]

@@desmondvater8220 @000

[@gkvogt]

I'm sure that he only meant it as a display piece.

[@user-me6eo2pv6m]

Не плохо бы теперь зажать что-нибудь в них, проверить качество шва! Думаю на раз эти тиски!)

[@crimerevoltyourfriend5477]

Так и есть.

[@user-tl7xo1ei3v]

@@crimerevoltyourfriend5477 На продажу пойдет))).

[@csamby1694]

Cool it’s always good to see something well-made been brought back to life I hoip whoever has this Vice Has many years of good use out It

[@lindawallace6750]

BEAUTIFUL !!

[@georgelimoncello5874]

On the 11:28 you've made a trick with wrapped copper around your welding rod. Could you tell us more about that?

[@henkgelauf442]

I know you can it repair i like you video

[@user-wn3jc1vf7l]

GOOD VERY GOOD 🌹🌲🌹🌼🏵️🌸🏵️

[@mirzawaseem2006]

I watched this video only to see what method you use for welding the two pieces. After watching i have come to the conclusion that your work might be good but the joint you welded would never last long. No matter what method you use.

[@nalsur5204]

Он его продаст. Не покупайте с рук крашенные тиски.

[@user-jn1td2of9y]

И топоры

[@adriamiraguilar]

Perfecto !! Que desafío !!

[@rayfalcone6897]

excellent video thank you for sharing with us on youtube

[@Andreas-du7eg]

8:03 the old piece with deep rust marks 8:20 another piece, complety new

[@valveman12]

I really enjoy restorations videos like this. I learn something new every time.

[@swanseauk]

I totally agree...I learnt how bad some people are at welding

[@valveman12]

@@swanseauk If it works and is not being used in an industrial situation, and the welds hold, who cares!

[@Anmobgoccult20]

Again, Eeee, well done again, it's a great honor for me to see another person with precise attention to detail and his wonderful work, well done and respect from old BG.

[@marcuscicero9587]

applaud the effort. thanks

[@FOMI1970]

I've watched the whole video just to know how is he going to weld the broken parts only to see this inappropriate and weak joint !!!

[@user-xj3sw5we6m]

варить чугун бесполезное дело.Их теперь только в сервант поставить...Лучше бы без трещины нашел и реставрировал.

[@user-oh9fd1gd9i]

Ты не прав друг мой , мне таким же способом заварили, живые тески до сих пор что я только зажимал ими сбивал на них.

[@user-wb5wo8ns5w]

видимо зря целый нии в свое время разрабатывал электроды по чугуну))) скажи им что они впустую потратили свою жизнь

[@user-xj3sw5we6m]

@@user-wb5wo8ns5w Варить чугун можно,но место сварки,все равно будет самое слабое.Варил я много раз чугун,лопнет не по сварному шву,а рядом.

[@dahintenviktor8493]

Чугун можно варить, но надо знать как это делается. То как он сделал большой ему минус за сварку

[@f75gunslinger]

Easy with the bondo there dude...you just want to apply enough to fill the holes in. Otherwise you just make more work for yourself. The welding was...interesting. Not sure it will hold up to heavy use. Not sure why you filled the entire side with the lettering in with filler. You have a small die grinder/dremel. That's perfect for cleaning the letting out. Most of the chamfering you did on the sharp edges would have been cleaner using a file. Small die cutters are very hard to use to make a nice even chamfer. You also painted part of the bottom where the parts slide together. Keep working on your skills and aquire more tools...the right tools make all the difference. When fighting rusted/frozen bolts, stick to a 6 sided socket. 12 points will get you into trouble. Overall it came out pretty well. Take your time too...you already put that much time into it. Might as well put in a little bit more and have an outstanding finished product.

[@fm00078]

Possible he's using basic tools to show how it can be done with basic tools. Tho the Dremel is out of place here. Agreed, FILE IT under, file it.

[@restoreandmake]

Absolutely brilliant, your work is a great inspiration for my own videos😊👍

[@TheFabrik]

Such a good job ! Very pleasant to watch. Subscribed ! 👋

[@winstongang2115]

Thanks bro I enjoy watching ur vids. Keep up the good work. Its obv that you enjoy what ur doing. That's a passion at heart!

[@panchalhardik4118]

Your tools and workplace and techniques are good

[@john_zhukov]

2 вопроса: 1) зачем призму для труб с губы убрал; 2) зачем губы сгладил?

[@user-mh1zg2pd9k]

Согласен с вопросами.

[@pavelandreyuk807]

3 вопрос, почему так плохо заварил подвижную часть. Зато полировка, да

[@alextrofimov6208]

Вопрос в другом. После сварки ЭТО нагрузку держит? Или сразу по сварке отвалилось? Тогда ему и призма не нужна, а только внешний вид.

[@user-jp6pf3zc1v]

Согласен 💯 %

[@alextih5971]

БУ,ТАФОРНАЯ работа на 100% надо знать сопромат или хотябы металоведение

[@Hadidkb]

Hi dear friend. My name is Hadi and I live in Iran. I was 👏👏amazed at your accuracy and creativity in doing things. dude I am a fan of your channel. I introduce your KZbin channel to all the people of my country and I pray to God that you and your family and everyone you love are always healthy.😍👏👏👏

[@leehunter1967]

What a wonderful comment. That’s very nice of you to say. Bless you 🇨🇦🙏✝️

[@user-en9oo7zt6s]

Bravo...

[@user-kd4eu6hs4j]

.هاللـًـًٍـٍَـًٍـًٍـًٍه هاللـًـًٍـٍَـًـًٍـًٍه جميـــــــــــــــــــــــــــــــــــــــــــل

[@paulsweeney5642]

Enjoyed watching, keep em coming.

[@user-cx4vd5sk8z]

Қойил. Отангизга рахмат

[@user-cm8ic2wb8c]

Э нимасига рахмат?! Чугунни сварка килип уни кайта болгарка билан шлифовка килип койди. Бу темирни кисканда уша сварка буган жойдан яна ажралип кетади😅

[@user-hk2hh9pc1h]

Бриллиант :)))))

[@rogerforce8061]

HELLO MY FRIENDS. I AN ROGER OF BRAZIL.....THIS VIDEO IS VERY TOP !!!!

[@hasannaci]

Nice effort. you have the determination, take your time think it over, you will get there.

[@billgeorge7804]

That weld won’t hold beyond the first pinch of the vice jaws. In forty years of engineering I can truthfully say I’ve never seen anyone wrap what looked like a standard mild steel electrode in copper wire. You should have used a low hydrogen version, bevelling the edges prior to welding. Keep trying though, the rest was good, barring when you straightened that clamp bar on the jaw of the vice jaw rather than using the little anvil at the back . . .

[@osarostov]

He's an idiot.

[@Reman1975]

I did wonder what the deal was with the copper wound welding rod? Never seen that done before, and I feel I've probably used (Or at least seen) most of the tricks that do work on cast iron. Personally, I'd probably have ground the makers marks and logo off those recesses on the moving jaws sides, bevelled the edges of the break and brazed it, them made some steel plates that fit into the side recesses and Brazed those on too. It probably still wouldn't be as strong as a well prepped and executed stick weld, but it would be a damn sight easier for this guy to get right without filling the whole area with stress fractures.

[@freezemanrjbr]

Nasarov Method, about the fifties (1950 decade) www.alustir.com/english/did-you-know/nasarov-method/ I have a degree in Electric Engineering but I work as welder. This method was developed in Soviet Union to repair cast iron pieces without pre-heating.

[@Reman1975]

@@freezemanrjbr interesting reading there. It's defiantly a new concept to me. It seems they partly used this method, but didn't coat the hybrid rods in borax and sodium silicate. But surly, if this semi brazing method worked as well as welding pre heated cast iron we'd be able to buy pre wound and coated welding rods? I'm now really curious how strong their welds actually turned out?

[@freezemanrjbr]

@@Reman1975 I really prefer to pre heat and weld with a 7018... but all this people is saying that what he did doesn't exist, and it actually is an old method... These people, I think, never studied welding...

[@garyjones2582]

Very nice job.. Camera work is very good.. I do have one suggestion and it can actually save u some money.. Put away the WD-40 for squeaky door hinges and mix up a 50-50 batch of Acetone and Automatic Transmission fluid.. It makes WD-40 look like water.. spray it on heavily and let it soak up to 4 hrs before recording.. I noticed how heavily u applied the WD-40 and when you removed the screws the threads were still dry.. You're doing a fantastic job, keep it up...

[@AugustRestoration13]

Great job!

[@quadflopper1012]

welding cracks in cast exhaust manifolds is totally doable, welding cast on a broken vise will never hold, even if you managed to get the weld to hold, it will just break right next to the weld......

[@ScottH1130]

After watching My Mechanics everyone else on KZbin is like amateur hour.

[@lukasvesely3398]

Agree. Your's restorations are amazing!

[@technician-technologist8590]

We've come up with a yak ad channel

[@deserteagle9624]

That's the curse of having found the best restoring channel.

[@hasannaci]

My Mechanics is the man. but I bet he started off amateurish.

[@technician-technologist8590]

I also started with amateuring my channel. So what? But I want to tell you one thing that a simple person who started shooting and posting videos on KZbin until he pays the money for someone to promote it, will not achieve anything even if his videos are very cool.

[@salvatoreserra9143]

Wow, this is a really good job👏👏👏

[@user-dm8dc6vd3m]

Много лишней работы, которая на конечный результат никак не сказалась. Что шпаклевал ты их, что нет , покрасил бы сразу и результат был бы такой же ! И самое главное держать сварка без разделки и усиления вряд ли будет.😉

[@fanacm5]

Как по мне, либо варить на горячую нужно было с плавным отпуском, либо сшивать.

[@user-cc6uj6fj5i]

Лейла! А ты шаришь!)))

[@user-lx2kl2bf8o]

Зварювати чавун потрібно аргоном, з мідною присадкою,і то не факт що буде дуже надійно.Доброго всім вечора.

[@user-yd3ir4wb1m]

@@user-lx2kl2bf8o Разогреть 300-400 гр и варить обычными электродами, или специальные электроды. Медь это херня

[@user-on6or3ow3i]

А ему и ненадо что бы держало, он их на выставку готовит.

[@vikinglogan9715]

Truly a Beautiful Boat Anchor.

[@SilverBricks17]

*500 sheets of sand paper later* “I may have put too much bondo on this thing”

[@thomasthompson6799]

Wow that was a badly abused little vise but you gave it a new life. Excellent work!

[@billreyna1355]

Looks good. I suspect that you forgot to put the grid pattern on the jaws blocks. It may grip but any pounding will loosen too quickly. Longer bolts for base pedestal so you can rotate and not lose nuts when you need to adjust. My hands hurt after watching you sanding. Nice work.

[@AutoMotivate]

I see a lot of hate here in the comment section. Making a piece like this into art isn’t a bad thing. Probably still do okay in lighter jobs, too.

[@davidhall8874]

One vice restoration among hundreds. These restorations spring up faster than sailing channels!

[@andreabirritteri6599]

Uno dei più bei lavori di restauro, a cui abbia mai assistito, complimenti.

[@chrisnorton2837]

Confused as to why you ground off the cross hatching on the jaws? That's put there for a reason, so you can grip your workpieces.

[@sonnyajvoll5865]

I watched a similar video where someone did the same thing just coz he already had a vise but had a use for a smooth-jawed one too, maybe this dude was the same?

[@aminnemec4791]

Даа, прям красиво снято,,,,,а деталь так себе

[@freezemanrjbr]

THank you. I only saw Nasarov Method in books... Now I can say I already saw somebody using it.

[@davidmotoole]

Very interesting. Thanks for pointing it out! www.alustir.com/english/did-you-know/nasarov-method/

[@rumata_estorski]

Good work!

[@harveythepukka3301]

Very nice job not using a mill or lathe

[@claudioferras5572]

Ficou extremamente linda!

[@abmorozov61]

про гладкие губы шпатлевку и сварку чугуна тут уже много писали?)))

[@ivandogshit7880]

Перед сваркой кромки не разделал .

[@massimosicily1461]

Bel lavoro 👍

[@Daves_adventures4315]

Turned out nice

[@angeldiaz9430]

Sad but this was though to watch.

[@marivaldooliveira2542]

Bom trabalho

[@bubihartmann3961]

Eine gute Arbeit von einem guten Mann!👍😁🍀 Viele Grüße aus Deutschland

[@andrzejporeda7281]

Świetnie jest to stare przedwojenne imadło odremontowane pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍

[@g.l.swartz3157]

You tube recommended this video to me. First time I have seen your work. Very impressive. I have seen many vise restorations and that vise was by far in the worst condition to start working on. I subscribed immediately after watching and will check out your other videos.

[@leoroel99]

Nevermind the weld, never ever buy a swivel vice. That aside, I think you're stating and I'd like to encourage you to continue, get a tripod for the camera (there are some telescopic ones that work on the table or floor, but some are expensive) that will get you better shots, keep honing your skills, awesome work.

[@hotice8885]

What is wrong with swivel vices?

[@hotice8885]

@@joesgarage2493 , GOT it. Thanks, man!

[@michaellaskowski7887]

Eine sehr gute Restauration. Respekt.

[@zurab1686]

Выстави на авито на продажу, впарь как новые. Так то годны на запчасти. Винт, гайка, сам корпус.

[@paulorth2251]

Nice piece of shelf art, looks good but can't be used to perform its primary purpose. Like I said nice piece of artwork. Texas watches.

[@abrosimovengineering3952]

Пустая работа. на полку поставить, ждем тестов.

[@user-yd3ir4wb1m]

Ремонт на соплях, ещё бы на пластилин посадил.

[@viktornikanoroff8300]

Работа ради самого процесса

[@MrDIY8]

It is very but can restore, Nice

[@YaqoubAhmad]

فنان عمل رائع

[@jeffreycash3662]

I have yet to see the penetrating oil actually get to where it's supposed to go. Total waste.

[@sultan560]

hard worker, thumps up

[@Multantechinfo]

good work

[@marcoserra9827]

Mamma mia che figata..

[@almostperfectrestoration]

Those vises are soviet, where did you get them? Good work✓

[@MrScrew]

Good job

[@michaelgayandproud6466]

Great job thanks for sharing your great talent

[@antiquesrestoration3339]

🤟🤟 good job!

[@markadams7597]

Holy Smokes! 4 commercials during this brief 24 minute vid. Hope the u-tubeys were generous with you.

[@benhouari5021]

DES MAINS EN OR ! BONNE JOURNEE

[@tructieptinvui1248]

Very good friend, let's create together, see you all again

[@williampz]

Nice work. Tell your cameraman to zoom out. Damn that is way too much close up.

[@podocrypto6072]

WD-40 sucks as a penetrating oil. It's only a lubricant. Use PB Blaster for deep penetrating oil to break up rust and gunk to get things loose.

[@joaquimsilva9631]

Bom

[@tinlapchoi2740]

Amazing

[@williamkendall7412]

Looks nice. But not sure of the strength with that weld though.

[@brandonstutts90]

That’s what I was thinking. What kind of rod was that?

[@martinjavierdemaria1137]

Que lindo pisapapeles

[@adilsonalvesdeao1294]

Showww top👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷

[@user-tg7oz5bn9n]

Там по мимо сварки нужно наложить металлическую пластину,взять ее на болты,а так это музейный экспонат,не более,или макет.

[@latessaallison1228]

I'm a new subscriber and think your work is good. Don't pay attention to the negative comments most of those people prob never restored anything in their life. And practice makes perfect. I'm sure u know what needs improvement and your doing the right thing by even restoring these parts. Keep it up.

[@KOKO-jo6ty]

just for fun!! unuseful!!! the welding is not strong enough!

[@IlNamelessKinglI]

He can weld it again when it fails. Whats the problem? He was using an old style technique for welding but it didn't come out perfectely. Once he gets better at welding he can always improve it unless he sells the thing.

[@jonwatson9765]

Shame the new swivel mounting bolts are too short.

[@user-vj9zt1fo7o]

Где ж вы только их находите...?)))

[@roncooke2188]

Penetrating oil is best left soaking a couple of days, a touch of butane is best releasing treatment. Great video interesting too

[@reubenrodriguez6219]

Great job. Amazing

[@maenabed9827]

Nice

[@user-ll1qt4jn2v]

Проникающая смазка никуда не проникает!