Some Things You Need... And Some You Don't / INSTALL & TEST DRIVE

[@55naudet]

It's always easy to ignore the little things until they build up and becoming overwhelming. Great video and perspective as always! can't wait for then next one

[@paulhudgins5120]

Oh yeah the Retro fox is sounding so good, love new mufflers, looks she is getting up the road real good. And yes that B-cam is still talking $hit.

[@reaperstang2717]

Loved the video. Can't wait to watch it with my daughter tonight. Brings back a lot of nostalgia when I watch all your videos ..... thank you for all your hard work and dedication to this channel and your family 👏 ❤ 🙏

[@BREW2LFOXBODY]

Thank you 🙏

[@zlowe3643]

@@BREW2LFOXBODY how do u get the little fox beside name

[@BREW2LFOXBODY]

You get that if you become a member by clicking the join button. 2.99 or 5.99 monthly options.

[@zlowe3643]

@@BREW2LFOXBODY a small price to pay for salvation

[@Jerry-jzg]

That’s really cool your daughter helping you

[@BREW2LFOXBODY]

She loves to help!

[@whitefoxpaul199]

Video looks great as always, car sounds awesome. Thanks to you and the Mrs. For the care package that I received yesterday thank you so much.

[@BREW2LFOXBODY]

You’re welcome and thank you 🙏

[@bama_5.051]

All ur videos get my attention n keep it lol.. man I really love the sound when I get mine up n running smooth again I'm going to check into that muffler.

[@79beans347]

Aw man I wanted more details on the spark plug install, I got my 347 built and can't figure out how to get the plugs installed..😳🥺......................................................... 😂🤣😂🤣 just messing with ya man, figured that you could use a laugh or a "what the hell " moment 🤣😂

[@BREW2LFOXBODY]

Looool I was wondering there for a minute 👀😂

[@79beans347]

@@BREW2LFOXBODY 😂🤣😂 Glad you read it and got a laugh, I like to throw in random ,crazy ,off the wall stuff for a good laugh 🤣 there will be more to come !!! 👍🏾🚗💨💨💨

[@stephenroberts7816]

Nice! All buttoned up and chirping the tires. Love it!

[@alexirodriguez9121]

Nice! From what I've read, the coolant is used to cool down the EGR spacer since the exhaust gasses recirculating through there during steady acceleration (cruising) situations is much hotter. Also, the 93' Cobra has the EGR and coolant setup, but it is part of the upper intake manifold instead of a spacer like the regular 5.0 HO engines.

[@hotrodray6802]

Dump the egr if smog is not important. Stop the exhaust flow into the spacer. Leave sensor vac hooked.

[@johnkovich1617]

let’s get the facts straight …… the 93 cobra DOES NOT have coolant flowing through the upper intake . 😊😊

[@ricardo340]

I didn’t know the turn signal switch was that easy to do. Got an 89 tilt column for my 91 so this helps me understand how it’s in there. Thanks

[@zacharytotten5238]

Awesome video as usual!

[@STXDrIvEr98544]

Loved the video! I've been trying to decide if I should order a bump steer kit and what your thoughts were on it, I'd love to see you do a review on the SVE or MM kit on the retro since we all have lowered foxes now days. Do like a before driving vid over some bumps and whatnot and then an after. Mine seems to "fall" into lines in the road and track back and forth at times. Just figured it could be a good video suggestion since they are only about 70 bucks for the kit.

[@BREW2LFOXBODY]

I have one I need to install… maybe I’ll do that next week?

[@STXDrIvEr98544]

@@BREW2LFOXBODY Hell yea man! that would be awesome!

[@hotrodray6802]

🔔😎 They help. You'd be surprised how much tires affect the wandering and pulling. Not all tires that are rated the same and the same size steer and handle the same. Major differences. Diameter and wheel offset alters scrub radius and can make things worse. Use what works for others. JMO 😎

[@brianloftin9196]

You are not kidding. My 88 is on the typical fake cobra wheels and BF Goodrich KDWS 245’s. It tram rails very badly.

[@woundedfox5109]

Hey bubba,can I suggest that ya get sum lights that you can stick under hood, sum the shots are so dark

[@FoxcastMedia]

Ole Retro starting to be a player!

[@BREW2LFOXBODY]

Slowly… 😂😎

[@hotrodray6802]

Early 90s Ford Motorsports has an HO deuce roller chassis at NSRA shows. Showed what smog etc could be eliminated easily and how. Lots of people fighting simple things.

[@sav22rem22]

I remember why your fan was tore up I think. When one of the bolts backed out and let the fan go crazy and it tweaked the water pump and made it leak as well

[@BREW2LFOXBODY]

Ahhh yes! That’s right 👌

[@Pete-lz5eg]

Is that the same video that the cut springs fell out?

[@BomB_Don]

Running lean at idle is usually the main issue.. after HCI..low idle.. runs hotter than normal.. tune will fix. if everything is right. Another problem is leak timing cover/ water pump.

[@mysticker11]

noticed the 4 hole fan spacer got thrown around alot making that nice cling..sound...but isnt it not used on the foxbody>!!!

[@BREW2LFOXBODY]

I’m pretty sure it’s used on the pre- aero cars. But I’m not 💯 on that.

[@Driver_Joe]

Great video as always. 👍

[@benbeckerson2107]

I just did the clutch fan also. Wasn't to bad.

[@StLMikie]

Thanks for the video B.

[@Gmed11]

did you have to get that egr plug delete??

[@bobyoung1698]

That shop assistant helping you with the fan must be the driver of the pink jeep I've seen in your garage. Does it have a 5.0 in it?😉

[@BlueTx68F100]

They make the EGR delete that is the same thickness as the stock one. That way you can leave your cruise control hooked up.

[@BREW2LFOXBODY]

👌true.. I like the look of the small one.

[@BlueTx68F100]

@@BREW2LFOXBODY as long as your ok tucking LOL

[@tedjones450]

I heard the reason for the engine coolant going through the egr spacer was to keep it cooler due to the exhaust gases being hotter than the coolant. You can get a thicker spacer usually on e-bay and as for the water tube I just cut and weld where the small hose goes and it makes for a cleaner look. Put a pipe plug on the rear of the intake at the location where the other hose was.

[@williamcorum9402]

😎 sent mine down to you next year😄😄😄

[@scottpenegor1523]

I drill another hole to release some of the throttle body spring and change the hook side also. It's now the same as stock .

[@MustangGuy6501]

Awesome sounds good!

[@zlowe3643]

The sve electric fan kit is actually pretty dang good

[@jbone1008]

The coolant going through the EGR spacer is WAY cooler than the exhaust going through it.

[@hotrodray6802]

🔔😎 JMO MSD Digital 6al with the plug and play 8874 harness makes plug gaps irrelevant. Also helps the cold start and cam idle, tune, and torque, bad gas, etc. JMO 😎

[@frank3stangs]

Nice video! What made you change the turn signal switch? I have no turn signals on my 92! Just wondering if that's my problem!

[@jonathancorona1423]

Do your hazards work?

[@frank3stangs]

@@jonathancorona1423 no, I think I need a new switch for the hazards. It don't click when I turn them on. Would that affect the turn signal from coming on?

[@sav22rem22]

@@frank3stangs They are sort of wired together in a weird way. However if you take out your hazard switch, check to make sure no wires have fallen out of the connector on the back

[@jonathancorona1423]

@@sav22rem22 yup, i had that problem and had to check every wire and make sure it was in the right spot and turns out that one of them was in the wrong spot. Unless the wiring is correct then most likely it’s the switch being the issue or the flasher

[@rr122608]

I also noticed that the 70mm tb I put on my stock fox was stiffer than stock. I’m now looking for an aftermarket 19lb mass air meter since it runs rough during cold starts. I just purchase today the ect and act sensors like you said on your previous video. Hopefully that will do to make my fox run like new again.

[@ryanberg4217]

Hell yeah brother nice ride mines almost there haha

[@jerrodminton1736]

So is retro's heater core bad. I noticed it isn't hooked up

[@BIGDMEDIA]

Retro Fox Sounds Good!!!

[@jerrodminton1736]

Could you use a phenolic spacer between the upper and lower intake, and get enough clearance to hook up cruise that way?

[@jerrodminton1736]

Why didn't you got to a electric fan? I've always have had good luck with the proform. Just curious?

[@irshred]

Sounded sweet! Could u tell a difference with the head swap?

[@BREW2LFOXBODY]

Honestly maybe 30-40 hp

[@GearHead704]

Retro Fox sounds really good 🔥

[@evelproductions9952]

So that's what that is.... Lol nice man I did the same didn't cut just tucked em nice and neat

[@sergiovelasquez6549]

Whit the egr delete plate I read you have to use diferent throttle cable hardware? Or not and did you use a Resistor on egr valve plug to avoid CEL?

[@rickgarza45]

How did you get your throttle cable bracket to connect to the delete plate mines also hits the heater tubes

[@89gt5.0]

What’s the advantage or disadvantage of the delate plate? And did you plug in a resistor?

[@BREW2LFOXBODY]

Nothing really. I just like the cleaner look.

[@lamarrichardson1782]

Hell Yeah!!!

[@feellnfroggy]

"Alright guys, I'll get back with you when I get everything off the calypso....." just like my grandma and grandkids, can get the right name to the right kid to save her life. 😂

[@BREW2LFOXBODY]

Did I get the names mixed up?😂🤦‍♂️ I did have to get the throttle body off the calypso to put on the retro. But I wouldn’t doubt I got them mixed up 🤷‍♂️

[@feellnfroggy]

@@BREW2LFOXBODY then maybe you didnt mix them up. I understood the body on the bench for the retro, not pulling from calypso. Makes sense. Was just a funny comparison in my head. Too many cars or too many grandkids? Lol

[@jblaze0382nj]

Still waiting on those door lock knobs I see. LMAO 🤣

[@BREW2LFOXBODY]

Me too 😂😂

[@jblaze0382nj]

@@BREW2LFOXBODY what did you say? I couldn't hear you cause of all the rattling. Lol your the man brother!!! 🙏

[@MisterJ.J.]

Do these performance modifications require a custom computer tune?

[@Adrenacyde]

Did you add a 75mm spacer and throttle body to a stock upper intake WITHOUT porting the throat!?

[@Pete-lz5eg]

During that test drive that 1st to 2nd gear shift must not of hit as hard...your right-side speaker grill stayed in the dash

[@BREW2LFOXBODY]

😂😂 I finally fixed it 👌

[@jimmyjamesgarage3290]

Looks/sounds like retro is running pretty stout 👍

[@stevegifford4874]

Anyone know what Trans and gears.? That seemed like a much better 1st gear than mine

[@Jonathan-fx5pr]

What happened to the deflector?

[@scottpenegor1523]

Don't you get a engine code now you deleted the EGR?

[@scott5.0hh44]

What do you think about the chin spoilers on lx mustangs in place of the stock diffuser? Do you think it will effect the cooling?

[@BREW2LFOXBODY]

I love the look honestly. Not sure on the cooling effect though.

[@FishingWithJo415]

You recommend gaping the spark plugs to .39 then?

[@automotiveaddiction428]

How often should a timming chan be changed ? My car seems to have the unsetable timming...it either will turn over like crazy and might start and runs like crap...or I get it to start cold and runs good but as soon as it gets a bit hot..like 5 blocks..it has to cool down to start

[@hotrodray6802]

unplug the mass air and see how it runs really

[@automotiveaddiction428]

@@hotrodray6802 don't have mass air..its carbureted

[@boostedego6043]

Did you use an EGR simulator or just leave it unplugged so the ECU turns off the function? Thanks

[@rodriguez-1230]

Do you know where I could get factory sized throttle body studs? I seen the one from trickflow but they include the gaskets.

[@jimhilt1652]

What did you do with egr ,evr, and vacuum lines? Won’t it cause a rich condition with egr unplugged.

[@pvnugget]

Do you need to change the maf sensor after changing to a bigger throttle body? And why did you change the wiper/turn signal stock?

[@BREW2LFOXBODY]

No need to change the mass air. My blinkers wouldn’t reset after I turned the wheel.

[@sav22rem22]

You don’t need to change the maf.

[@pvnugget]

@@BREW2LFOXBODY my gauges go crazy when my headlights are on and turn signals are on, any idea what ls the problem?

[@fd-vy9up]

I had the same problem it was a ground problem

[@pvnugget]

@@fd-vy9up thnx I’ll check for loose ground this weekend

[@josedamiansolercarrillo430]

Desde España, yo un foxbody 90 lx 5.0 v8 video delete smog pump

[@jaymartin5434]

With removal of egr how do you stop spark knock ??

[@Franisboche]

Did you buy or build your garage? If you had someone do it, which company?

[@BREW2LFOXBODY]

Company named ALL METAL built the shop

[@alexgarza2759]

Did you leave the pcv connected to the intake still. Or did you put a filter.

[@roadkillstash3974]

What rear gear is in the retro fox?

[@TomClausen74]

Man I don’t think there is anything about a fox you don’t know

[@crabbypapa3862]

If your daughter had stripped, or broken the bolt while tightening wouldn't You have been surprised? Never underestimate the power of girls! Experience talking here.

[@BREW2LFOXBODY]

She can break anything 😂 never underestimate anyone 😎