Blu-Lock & Drip

[@rynophiliac]

I have 6 zones on drip. Do I need one pressure regulator/filter for each zone or can I install the pressure regulator/filter before the valves so all 6 zones are reduced/filtered?

[@davidbodine8350]

When connecting a three and a two there is only one end and you are short one for the other side. Can you buy the other fitting you need to connect the two?

[@ylecha2016]

What if a 3/4 blu lock pipe? I can’t find the right adaptor at HomeDepot

[@JB-ro7kv]

I am looking for the same part, I think it is Part Number 03134 3/4" Blu-Lock x 1" Male Butress Thread Adapter, but it is out of stock seemingly everywhere, I am going to try the 3/4" version of Hydro-Rain HRM 100 x Blu-lock Transition Adapter from dripdepot.com part #10522. Wish me luck.

[@ylecha2016]

@@JB-ro7kv I spoke to people at Orbits online and they suggested to use the Poly adaptor out to the blu lock with the metal clamps

[@TolicaCanadian]

is eco-lock 3/4 pipe compatible with blu-lock adapter/coupler?

[@orbitsprinklers]

Yes, blu-lock fittings work with all equivalent sizes of pipe, including eco-lock. however, eco-lock fittings only work with eco-lock pipe (which is discontinued and replaced with blu-lock).

[@TolicaCanadian]

@@orbitsprinklers thank you

[@chcotydf1]

I’m having a bit of trouble finding adapters that go from the sprinklers to the 1/2 inch black pipe .. I have one of these orbits your working on.. so I need adapters . Do you have a link where I can order them?

[@orbitsprinklers]

Hello. It's not common to have a valve go directly to 1/2-inch line, which is why you're not able to find adapters. 1/2-inch is usually recommended for risers only as the pressure loss from these valves, which are 1-inch, would be too great. The included adapters work for 1-inch and 3/4-inch, which is typical for lines coming off manifolds. If you'd like us to help with finding the right solution further, please reach out on social media (linked in the description) with your contact info and we'll get in touch. Thanks.

[@etcharrisons9483]

blu-lock adapter 1" - what is the part number

[@orbitsprinklers]

You're likely looking for the 03133, found here: store.orbitonline.com/store/products/1-blu-lock-by-1-male-buttress-thread-adapter/