Gelli Plate Transfers With Your Own Photos! 🎨 ❤

[@roysfoto]

May I just mention that you are by far one of the few who present your tutorials so honestly, using materials, understandable without lengthy chatter, but straight forward. We thank you very much and wish you a happy and peaceful life.

[@bluelavaart]

That is so kind of you to say. I can probably attribute it to the fact that I teach middle - High School Art. Thank you for your kind comment and I also wish you a happy and peaceful life

[@goinblinddoggone]

​@@bluelavaartoh yes indeed, an essay could be written on this statement!

[@DCW39]

What have you started? Stumbled upon this video and now the gel plate is on order… this is a rabbit hole I’m looking forward to exploring!

[@bluelavaart]

How exciting! Enjoy the rabbit hole

[@jcarson7574]

I just found out about this process today and have been watching videos for hours. I cant wait to get into it myself!

[@jcarson7574]

Have you tried yet? So tonight was my first attempt at anything, total newbie, tried to do an image transfer with no luck.😢Can’t figure out why unless my paint is drying too quick on the plate? Using Amsterdam Standard acrylic.😢😢Or my laser print isn’t good? Guess I’ll keep trying. She makes it look so easy!

[@suzijorgensen6545]

😂😂😂

[@Bigheartrolling]

Hahaha. Same here!

[@susanfernandes7748]

I have a Brother colour laser. I set the printer driver to THICKER paper even though I'm using a 32lb copier paper. The THICKER paper setting causes the paper to move more slowly through the process. You get more toner deposited and you get a longer fuse time. I very rarely have image transfer failures with even the finest lines on an image. Love the addition of painting the on the gel plate itself -- stunning results and a very well constructed video -- thank you!

[@bluelavaart]

Excellent tips and suggestions. Thank you!!!

[@shannonburns2289]

Does the "thicker paper" option appear in the print window?

[@bluelavaart]

@@shannonburns2289 I can set mine on my computer in the pop up box for different types of printer paper but it might vary by printer

[@susanfernandes7748]

@@shannonburns2289 Yes, the setting is under Preferences. Every printer driver is different as is every printer. Most Brother LASER printers will have the same setup. Inkjet printers are a different beast. An inkjet printer is not able to print on really thick paper so they may not have the option. You would set it to the thickest paper option you have and print on normal copier type paper.

[@veerlewitdouck9831]

Hello, how do you double print? Put the print back in the paper carrier? Thanks!

[@tomgilbertson5236]

This is an excellent lesson! I’m a former (many years!) art instructor….. I’m envious! Seriously, this video is very well organized and presented. So much information and no useless wandering around. If there are awards given for instructional videos you should get an Oscar. Now….my 16 x 20” Gelli should be here this pm…….can’t wait…..

[@bluelavaart]

Wow! What a comment. I am so happy that you found my video. I’m a bit jealous of the 16x20 inch plate. I’m hoping to get one soon 🫶 ❤️🫶❤️🫶

[@paulfoote7869]

This is one of the better videos on how to do gel plate image transfers and Jessica's prints are beautiful. If you are going to paint your print on the plate like Jessica does in this video, you will need to let each layer dry before you add the next layer.

[@bluelavaart]

Oh thank you! How thoughtful of you!

[@gingerferrell1562]

The details on the printer were really helpful. Thanks so much.

[@bluelavaart]

You are so welcome! 🤗

[@creativebeanart]

I use packing tape to lift little bits of paint. Works a treat.❤

[@bluelavaart]

I am going to try that

[@bertschlutzenheimer7095]

This is awesome! Thank you SO much for your precise, detailed and so very warm way to explain your whole process! Thank you 💚

[@bluelavaart]

I am so happy! Thanks for sharing your feedback

[@mendyhand3895]

Dang girl! Thank you SO much! Going to watch this multiple times! ❤️🙏🏻👍🖌🎨

[@bluelavaart]

YAY!!! Happy you find it helpful

[@Scrapart_by_Zelinda]

Your video was the best I have watched. Some don’t explain you have to let the paint dry. Thank you. And I loved how you had color with a paint brush.

[@bluelavaart]

Always happy to help! Thank you so much. You made my day

[@waboosje]

Never seen this way of colouring before and just love it. Thanks so much for this tutorial!❤❤

[@juliebooton1360]

Excellent tutorial. I love your explanations and your work. My mind was racing with all the possibilities. Gifts I could make for my children and grandchildren of the family home, places visited and loved by us all. Thank you.

[@bluelavaart]

Thank you so much! It is a great way to reimagine your photos. Have fun!!!

[@avriltrudeau6322]

One of the better 'gelli-print' tutorials...with amazing results...thanks for sharing your expertise! These are super!!!

[@bluelavaart]

Thanks so much! Greatly appreciated!!!

[@br0600]

Amazing training video, thank you very much!

[@bluelavaart]

You're very welcome!

[@carrieclayful]

loved learning how to do image transfers with your own photos and how to make them painterly! thank you

[@bluelavaart]

You are so welcome! 🤗

[@p8ulr3id]

Brilliant! Thank you Jessica, a great explanation of your process

[@bluelavaart]

You are so welcome!

[@lavenderbridges]

Absolutely loved this video. SO helpful! And your screen name (and did I catch a glimpse of Aloha attire? It all spoke to this Hawaiian at Heart. 💙💙

[@bluelavaart]

Glad you liked the video. No Hawaiian connection but perhaps at hear :)

[@donnamckinney7734]

I LOVE YOUR STYLE! I've watched dozens and dozens gel printing videos, and yours is by far the closest to my heart. I really want to do expressive multimedia works, and you've REALLY inspired me. To be painterly with printing!😊 Ty❤

[@bluelavaart]

Wow, thank you! This makes my heart sing ❤️❤️

[@RackCrossStudio]

Just got my first gelli plate and looking forward to get into using it - THANKS 🙏for the How-to vids 👍🏻

[@bluelavaart]

YAY!!! That is great to hear. Have fun

[@kjscrim7373]

Great video. I love watching tutorials as they remind me that it really does work. I have had hundreds of failures and few successes. CMYK is a new technique that I will try. I think humidity may be an issue as well...the desert here is a bit on the dry side. 🙂 Anyway, great video!! I'll keep trying!

[@bluelavaart]

Yes, Humidity can play a big role in the success or failure of a transfer. CMYK has made a big difference for me. good luck :)

[@StampYourselfHappy]

This video is one of the best I have seen. Thank you for sharing your process and helpful tips. I really appreciate it! I can't wait to get started!

[@bluelavaart]

You are so welcome! 🤗 🙌❤️

[@AlainMusic-yj1no]

You are an excellent teacher Jessica. I have learned so much from watching you. Thank you.

[@bluelavaart]

Thank you so much! That is so niche to hear!!!

[@JacquiSpeers]

Thank you for being so generous with your knowledge❤

[@bluelavaart]

You are so welcome

[@bbosque13]

Thank you for sharing all of these techniques! I especially love the reverse painting. I have some great travel photos that I wanted to incorporate into an art project and you've inspired me to break out my gelli plates. Your teaching style is just fantastic, thank you!

[@bluelavaart]

Thank you so much! Greatly appreciate your feedback :) Have fun with your travel photos. Let me know how it goes

[@juliannaboldt7152]

This is one of the best tutorial videos I’ve seen on gelli printing. Thanks so much!

[@bluelavaart]

Oh my goodness thank you so very much. I really appreciate that.

[@Jeannine754]

Thank you for this awesome tutorial. I have two geli plates and have done different techniques, but have a photo transfer to do for a gift. This painterly style is exactly what I have in mind, but you hopefully have saved me a few attempts to get it right. Thanks bunches!

[@bluelavaart]

😀 you can do so much with it! Have fun

[@beverlyhayshouston2770]

The print with the arched window is my favorite!

[@bluelavaart]

That is one of my favorites too

[@kittycat1302]

Wow! I love ❤️ this technique! Plan to try it as soon as I get a chance! Thank you !

[@bluelavaart]

Wonderful!

[@stampinupwithbeth]

Your video is so professional. I learned so much in 30 minutes. I'm going to check out your other videos. I'm intrigued by the way you painted with a brush. ❤

[@bluelavaart]

Oh thank you so much. I really really really appreciate that.

[@melyssaclibbon7480]

Thanks!

[@bluelavaart]

Thank you so much for your generosity!

[@karenmason5218]

This is the BEST tutorial I have seen!!! Thank you!

[@bluelavaart]

Wow, thank you! 😊

[@eveking6356]

Thank you for sharing! I want to dabble in this to see how it turns out

[@bluelavaart]

You are so welcome!

[@Julietavolcano]

This looks like my type of art!!

[@heidiholycross-lui7340]

This is such a great video! Thank you for sharing your process for how you created these images, especially the printing tips at the end. Plus it was a delight to see your artwork too!

[@bluelavaart]

Thank you so much! Greatly appreciate 💝

[@artsydancequeen2964]

Thank you for an excellent tutorial. Now I need to get a laser printer!

[@bluelavaart]

Glad it was helpful! ♥️

[@mamascorpio]

.....OMG THESE ARE GOOOORGEOUS PRINTS! You've also helped mefigure out why my gelli image transfers weren't coming out right. ❤❤❤❤❤❤

[@bluelavaart]

You totally made my day thank you so much for taking the time to comment and I am so happy you are figuring it out

[@tracksuitgod]

This is the most detailed tutorial and most helpful gelli plate printing video I have found. Thank you for being so precise and reassuring that all my mistakes aren't solely my fault 😅

[@bluelavaart]

Glad it was helpful! and the mistake are totally not your fault. It is a delicate process with lots of variables

[@LindaAKeller]

Have never used photo transfers before. Am definitely intrigued. Thank you so much.

[@bluelavaart]

You are so welcome! 🤗

[@princesspandora8671]

looks so fun!! thanks for sharing

[@bluelavaart]

Thanks for watching!

[@clownbabyjen]

This was SO helpful, thank you!

[@bluelavaart]

I'm so glad!

[@ThomasWheelers]

You are a wonderful teacher. You really helped us. The heat wave means we are home with ac running and can challenge ourselves. Than you.

[@bluelavaart]

So happy to hear!!!

[@99111999]

Everything was fantastically explained, clear as day, thank you very much, tomorrow I take my camera and start a new era. You are a very good teacher! ✨📷🖨🪒💎🎨🖼🪄🪄🪄

[@bluelavaart]

Best of luck! Thanks for the comment ❤️💕😊✨🍾

[@bluelavaart]

Special Thanks to these Artists and many more!!! They have helped me so much in understanding how to do this process. Give them a follow. Khabraal: www.tiktok.com/@khabraal?lang=en Junky.Kid www.tiktok.com/@junky.kid?lan... @Ceramink www.tiktok.com/@UC2VRRQ6F-q6o... Amber www.tiktok.com/@princessmeatloaf Wesley Joseph www.tiktok.com/@wezzocreates?...

[@jackiejones4380]

Thanks!

[@bluelavaart]

You made my heart sing! You are welcome

[@jlcum453]

Thank you for showing how to use your own photographs, which is why I wanted to learn gel printing. I wasn’t have any success transferring magazine images let alone mine . Just purchased a laser printer, hope this works.

[@bluelavaart]

Glad it was helpful! It is a tricky process and takes some small tweaks to get it right. Have fun

[@maryjokattelman3321]

Thank you so much for taking the time to share. I have learned a lot.

[@bluelavaart]

Glad it was helpful! ❤️🤩❤️🤩

[@cryseldaventer8567]

Thank you for great videos. Love the Italian images❤❤❤

[@bluelavaart]

Glad you like them! I lived in Italy for nearly a decade, so it has a special place in my heart

[@georginaledlie7444]

Wow ! Totally wonderful.

[@bluelavaart]

Many thanks!

[@DJVARAO]

Love your work. Thanks for sharing.

[@bluelavaart]

Thank you too!

[@TrixieStardust73]

This is amazing! Thank you so much for the great tutorial! I can't wait to try this. I had never heard of this type of printing before and love how accessible it is with a minimal amount of supplies. So excited!

[@bluelavaart]

You are so welcome!

[@BarbaraPinneo]

Thank you so much for this video!

[@bluelavaart]

Glad it was helpful!

[@deborahk3435]

If you go to Kmart.. they have these clear perspex type boxes with a lid. I bought one in a size bigger than my geli plate and put my geli plate on the lid. It keeps the underside pristine and you can then pick it up easily to check the other side. So cheap.

[@bluelavaart]

Excellent tip! Thank you for sharing

[@shannonburns2289]

I have been honing my transfer skills for over a year now, and still this tutorial provided new information. I have yet to try the "painterly effect", and will undoubtedly return to this video as it focuses on that particular method of treating a transfer. The info comes at the viewer at a good clip, so I'll be re-watching with pen and paper at the ready.

[@bluelavaart]

Yay! So happy to hear this Shannon

[@221b-Maker-Street]

Wow! These images are just fabulous, and _just_ the kind of thing I'd love to create with a gelli plate - thank you, Jessica!

[@bluelavaart]

Thanks so much. I’m going to work on some more tutorials. Let me know what you still want to learn about ❤️❤️❤️

[@221b-Maker-Street]

@@bluelavaart Thank you! I shall put my thinking cap on as I definitely want to learn more. Thanks once again for sharing your gifts with us, Jessica. 🤍

[@trdewey]

Loved this video! Sometimes if you have an area that is sticking and peeling, you can add some matte medium and put your paper back down. Wait a bit, then see if you can salvage the area. Of course painting over it or collage works too! I love using my own photos in this transfer process!

[@bluelavaart]

Thanks so much! That is a great tip. that little bit extra of medium could really help

[@trdewey]

@@bluelavaart it doesn’t always work, but sometimes the gelli -plate gods come through. I love how you paint over the background to create a very painterly work.

[@bluelavaart]

Thanks so much. The plate gods are finicky

[@Creativeassemblages]

Thank you. The best tutorial I have seen on Gelli Printing.

[@bluelavaart]

That is so great to hear. I am happy you found it helpful

[@AdolfitoKatastrophen]

Amazing thank you! This is super helpful!

[@bluelavaart]

Glad you found it helpful!!!

[@marionlyding7935]

WOW. Thank you for the great instructions! This is a very helpful video. I am sending you greetings and sunshine from New Mexico.

[@bluelavaart]

So happy you found it helpful! Greetings from Germany

[@aforrest-chan9505]

I love these tutorials! Can I ask please what file type you use to save your images once you have Photoshopped them? Thank you! :D

[@bluelavaart]

Typically PNG but I save the original. Thanks so much!!!

[@charlottebialek-cx5rz]

Thanks!

[@bluelavaart]

Thank you so very much ♥️🎨♥️

[@Blessed_by_Yeshua]

Thank you. And I honestly would have liked to have seen you do the dolphins in water in that one photo transfer. A little old style with a lot of whimsy and movement.

[@bluelavaart]

Next time! perhaps! Thanks so much!

[@judystadler9419]

This video was terrific. I can't wait to try out the techniques. I signed up for membership. Question: You offer a pdf guide to image transfers on the gel plate. I clicked on the link but I just can't find the download. Help, please! Thanks

[@bluelavaart]

Thanks! The pdf is available for the Creative Collaborator level However I have lots of free resources on my website bluelavaart.com/art-education/gelli-print

[@judystadler9419]

@@bluelavaart Thanks for the info - BUT there's really no way for one to know that because it is not specified.

[@viviannedelavega605]

Thank you for a brilliant presentation and a wealth of information!

[@bluelavaart]

Greatly appreciated!!!

[@viviannedelavega605]

Certainly, you’re very welcome. What is your favorite way to clean your gelli plate?thank you…

[@bluelavaart]

@@viviannedelavega605 Using baby oil for the stuborn crusty bits.

[@futuretrends6253]

Hi I love how you put together your videos may I ask how do you edit them? What software do you use?

[@bluelavaart]

Thanks so much. Mostly they are a combo of Cap Cut and Canva for the graphics. 💕❤️

[@fruitlessbeast]

So much here! Many things to try now. Thanks for taking the time to share!

[@bluelavaart]

You are so welcome! 🤗

[@annelise8014]

Wow, what generous instruction - thank you from Mexico!

[@bluelavaart]

Thanks for watching! ❤️❤️❤️❤️

[@joujouprochaska7681]

Love love love your work I’m so inspired

[@bluelavaart]

I am so thrilled!

[@dominiquegorgeron2463]

Bravo et merci pour toutes ces explications très intéressantes.Joli travail.

[@bluelavaart]

Merci 💃🎉🌼​🌷​

[@carolratcliff]

I simply love your work!! You have really transformed the art of jelly printing into a fine art, especially with the added painting of your plates! And I also love the experimental-ness and fun of finding a style I need to find a style and I love the experimentation you do. Thank you for all of the, wonderful tips and tricks.

[@carolratcliff]

And I meant to say anyone can print with a gelli print, but it takes an artist to find a real true work of art!❤

[@bluelavaart]

I am totally blown away by your comment. Thanks for your supportive and kind words! You have made my day ❤️❤️❤️❤️

[@heloneida.Toronto]

You are a true artist and an inspiration for our work, thank you

[@bluelavaart]

Wow, thank you! Greatly appreciated

[@stephaniemaier2964]

Love your photo art & instructions. While layering your Snack Bar & Grafitti pieces, what are the fabic strips? I'm assuming to preserve the initial layer underneath?

[@bluelavaart]

I don’t think I used any fabric strips. Maybe there was just some scrap pieces of paper around.

[@bluelavaart]

Thank you so very much that’s greatly appreciated

[@annieoconnell4004]

Your work is wonderful! Thank you so much for sharing these instruction. I’m not sure I understand one thing. When you put the paint layers down over the image, do you want the paint to be wet or dry before you put the Bristol down on top of it?

[@bluelavaart]

Thanks so much. You want the paint to be wet. Then leave the bristol on it until it is fully dry.

[@bardoteachings]

I felt a true creative spark from your wonderful video. Thank you!!!

[@bluelavaart]

Wow, thank you 😊

[@waseemashraf3965]

Really helpful for artists thanx ❤🎉

[@bluelavaart]

Glad to hear that! :)

[@GlennJones-r5v]

His was a fantastic video and very informative. Can’t wait to start. Thanks ❤

[@bluelavaart]

You are so welcome! 🤗

[@63viet]

Thank you for your tutorial videos. Can you use acrylic gouache or gouache for gel printing? Thank you in advance for your advice.

[@bluelavaart]

You are welcome! You can but I don't think they work well for image transfers. There are a lot of media that you can use on these plates though.

[@valef9460]

Thank you so much for the great tutorial. Will you also experiment with photos of people? I would like to see what you do with them. Thank you! 😊

[@bluelavaart]

You are welcome! I will try with people. Sounds fun

[@valef9460]

@@bluelavaart thank you, looking forward to it!!

[@ginabarborek8126]

Thank you! I’ve have struggled with the image transfer ever since I attempted the transfers. Your lesson was so easy and I actually got a successful transfer! Thank you, thank you! I did have one question. What type of matte medium do you use?

[@bluelavaart]

Congratulations on the transfer!!!!! I think the one that I use in the video is by a German art supply company called Boesner. However, liquitex or Golden work well for this too

[@sarnxero2628]

This is really cool. I am going to give this a try.

[@bluelavaart]

Go for it!

[@krudler406]

this was great, thank you so much for sharing!

[@bluelavaart]

You are so welcome!

[@CraigsOverijse]

Not only do you not need those acetate to store the Gel plates but from what I understand they can damage the plate it is better to put a paper layer next the gel plate inside the box. I just cleaned mine then oiled and used then kept a sheet of copy paper each side I reuse this until it rips then get a new paper and they store well. .

[@bluelavaart]

Be careful with paper. It even says in the gelli plate instructions to not store on paper. The paper can dry it out because the mineral oil in the plate leaches into the paper. I store my on plexi, not acetate now and it works really well. I

[@blue.orchid.coaching]

Amazing content! Thanks so much for the lessons!

[@bluelavaart]

My pleasure ☀️♥️🎨

[@DayByeDayChristineOKArtist]

Thank you for sharing your knowledge about this fascinating art of transferring images and printmaking.

[@bluelavaart]

You are so welcome

[@cathleenvanbergen9356]

Is double printing a laser print the only way to get best transfer to plate ? What is the best paper to print the image ? Is it best to pull image right away from plate? And is Bristol board best final paper?

[@bluelavaart]

Here are my answers; Is double printing a laser print the only way to get best transfer to plate ? Yes. Some people have some luck with inkjet but it is a slightly different process. What is the best paper to print the image ? I use regular printer paper most of the time. Is it best to pull image right away from plate? During the image transfer part, yes, you want to pull it after some light pressure. And is Bristol board best final paper? That is what I prefer. I hope this helps

[@TheMatureArtist]

Thank you , been looking for a video with all this info.

[@bluelavaart]

Glad I could help

[@photoking100]

Thank you so very much for this video! I have been having a lot of difficulty with doing transfers, but have made some progress after watching this. Your suggestions are working well, but I am only getting any success at all with my sketch like images, but would love to transfer some of my own photos. I have been very selective in which images I try, and they seem to be of high contrast, but do not transfer in the way your storefronts do. I would appreciate anymore suggestions. And again, thank you for helping me to make progress! I love your work.

[@bluelavaart]

It might be the amount of paint on your gel plate. Is there no image appearing and all the paint sticking to the photo or is the paint remaining on the plate? It could also be the amount of pressure. I posted a short last week that might be helpful kzbin.infovFsnONx79Fo?feature=share I sometimes get ones that I think will work great but then don't transfer. It can be frustrating

[@bluelavaart]

and thank you so much for your kind words

[@c.goedhart2470]

Love your tutorial! Question: What kind of White Paint Marker you use?

[@bluelavaart]

It is a white gel pen 🖊️

[@manuelameier4667]

This video has given me hope again. I recently printed some of my photos on smooth paper using a laser printer and not one of the prints transferred to my gelli plate. It was very frustrating. I hope I can get it right with your tips. At the end of the video you said it would work with inject printers too. Do I still have to convert it to cmyk?

[@bluelavaart]

I have never been able to get it to work with inkjet. Some people on youtube claim that it works but I think the process is different. I have another video about trouble shooting. Perhaps that could help

[@selfiopath1982]

6:40 I found that leaving paper for more than a minute results in some 30-40% of the paper stuck to the plate for good, which ruins the whole print. I use liquitex basics, Amsterdam, W&N Artist grade and a 160gsm smooth printer paper on a Gellie Arts plate. I also use Matt medium or acrylic medium (instead of gel medium as in your case). Basically I follow each of your step and your timing, but my prints gets stuck to the well-seasoned plate. Why? I’d love to hear your thought please please please 😊

[@bluelavaart]

I sometimes even leave the paper on overnight! I think that last transfer layer is the key bit. Since I do a fair amount of layers before the transfer layer of paint or gel medium, I tend to do a very thick transfer layer. I am using 250 gr Bristol. That might be the issue. Good luck

[@alejandroreyesloa1231]

Hi Jessica, this is an incredible tutorial to get started with transferring images. I have one question about it, in the minute 21:00 you transfer an image then add some gel medium, put some paper over it and some books, my question is, this process will not pull off the image when the paper is removed? and how long did you leave the books over until you remove them? thanks for your answer and thanks again for this wonderful and helpful tutorial! 👏

[@bluelavaart]

I put the gel medium on after the black from the image transfer dried. However, you found a glitch in my video. The books and paper go on after the reverse painting. You are the first person to tell me about it. Thank you!!! I totally didn't spot that error. Anyway, I normally leave the books on for about 20 minutes then I will pull the paper when it feels dry. That could be 5 minutes or an hour. Depends on the thickness of the paint and the humidity.

[@ptorpie]

HI Jessica, I love what you do with Gelli plate photo transfers. I have watched your video a few times and have not been able to get any kind of phot transfer to the Gelli plate. Im thinking it may be the printer Im using which is a stand office laser printer/copier. It uses toner and it will print the photo in half tone but there is no photo setting for the printer. The prints just don't transfer. I also tried by inkjet photo printer and that totally didn't work. How can I get a decent print to work with the printer or do I need to find a fancier laser printer? Thanks for any tips

[@bluelavaart]

It is hard for me to day. The more toner on the plate the better. If you try to do a magazine transfer and that works, you can eliminate the amount of paint and quality of paint as an issue. Have you tried runing the print through the copier 2xs to add more toner?

[@jcarson7574]

I missed why was the gel medium used at one point? Your video is the first I've seen where you've used a brush, thats a great idea! Really great video! I'm so excited to get started! This is my first day even looking into all of this but just had a thought, have you ever tried rolling a glass over the gel plate? I'm just thinking of all the possibilities! Oh wow! The white paint marker!!! Thanks again for sharing this!

[@bluelavaart]

The gel medium sometimes helps the acrylic paint from pooling when it is applied with a brush. I usually will cover the photo transfer layer with a coat before I start in with the paint brush.. I don't know if it would work with glass. Let me know if you try it out! Thanks!

[@jcarson7574]

Thanks!!!

[@barbaracabrera207]

I'm a new subbie. Love your channel. Thx. Austin TX USA

[@bluelavaart]

Welcome!! Thanks!!!! Let me know if there are any types of art videos you would like to see

[@odilehelbongo5221]

Thank you so much! Love from Strasbourg France😘💝

[@bluelavaart]

You are so welcome! Merci ❤️ Strasbourg

[@guizachristiane4824]

Stonepaper is the best for this kind of printing

[@bluelavaart]

I use it in my journal but never thought about it for printing. Thanks for the tip

[@marythomas5656]

Don't make the mistake of buying the Speedball plates which are used with printmaking inks. The processes are NOT interchangeable.

[@bluelavaart]

Yes! I was so frustrated with Speedball for this process.

[@scrappytraveler-cherylfran4890]

What Gelli Plate do you both recommend? Thank you.

[@bootseycloverdale7371]

Excellant information. I can't wait to try this!

[@bluelavaart]

Have fun!

[@arri1cook37]

Love love love!!!! Subscribed and ready to play, but I NEED A LASER PRINTER RECOMMENDATION, please 🙏. I am very determined and missing that one key ingredient.

[@bluelavaart]

I’m definitely not an expert on types of printers. But I can say that the quality of your image including the resolution and contrast probably play a greater role, then the type of laser printer.

[@arri1cook37]

@@bluelavaart Noted, and thank you so much.

[@krimimimi]

great video. especially the try and error process. ive been through all the steps over and over again but nothing worked. unfortunatly home laser printers (at least newer models) dont work with the transfer technique because the toner for home laser printers is modified for homeuse. professional laser printers and giant copy machines still work with the 'old' toner technique and so very well for transfer. i wanted to get this work so bad 😢 also tried double printing but home lasers dont line very well on multiple prints.

[@bluelavaart]

I know it can be really frustrating. Check to see if you are printing on an eco mode that saves on toner. Also, I am working on a detailed video about this process and some things that could help. I hope to have it posted this week. If you like, you can subscribe and turn on notifications,

[@krimimimi]

@@bluelavaart i tried everything in your video. i live in germany i have access to all the tools you are using. but still no success. i tried everything form 1 to 5 layers of toner. also matt medium to get it stick. but nope. different brands of plates. still no transfer. magazine pages work perfectly fine. looking forward to the new video :)

[@bluelavaart]

I posted the video. I hope this helps 🤞🤞🤞@krimimimi

[@robynroth8033]

How long do you wait for your transfer to dry before painting on it?

[@bluelavaart]

until it is dry to the touch. Typically only a couple of minutes