Рет қаралды 898
In this video I will show you how to Factory reset your BlueSound Powernode 2 Amp to default.
Steps to Factory Reset:
1. Disconnect it from electrical power.
2. Wait 30 seconds
3. Reconnect the power
4. Once the LED turns Red, press and hold the PLAY/PAUSE button. The LED will immediately turn Green and then back to Red - continue to hold the button for 30 seconds
5. After 30 seconds, the LED will begin to blink red - then release the button
6. All customization to the Bluesound player will be removed and restored to factory settings
IMPORTANT:
Removing your finger from the PLAY/PAUSE button at any time before the LED begins flashing red will cancel the factory reset and leave the player in Upgrade Mode.
Just start the steps again to factory reset the player.
You will know the factory reset is successful if the player returns to Hotspot mode (wireless connection - the LED will turn solid green). If the player is connected to your network through a wired Ethernet
connection, it will simply connect as if it was a new player (LED will turn solid blue).
Please don't forget to Subscribe, Thank you!
VPN Specials
Surfshark: get.surfshark.net/SHwn