Bluetooth OBD II Tutorial [Super Mini ELM327]

[@krissosful]

I was worried it was not compatible with my Toyota, before i saw your video😀😀Many thanks for sharing!!

[@Mladjasmilic]

Kupio sam ovo malo cudo i ne znam sta sam uradio , radio je prvi put savrseno . Drugi put kad sam pokusao da ga povezem nikako ne radi - probao sam sa svim polozajima kljuca i nekad ne prepozna OBD , nekad ne moze da nadje protokol za komunikaciju sa autom , u svakom slucaju ne radi .

[@Anomliz]

I love the fact this was recorded with a HandyCam ❤️

[@lgdidit]

Thanks for the advice. I'm using my laptop for now with the elm727 mini. It gets the job done just fine.

[@FairladyS130]

What small device can be used other than a phone? Need to fix a permanent display in the car.

[@petarstoev4848]

Can you put it while being on highway and driving to clean certain error?

[@curtislind8661]

So mine connects and everything, but it's constantly connecting and disconnecting, any ideas?

[@asifrahimov1541]

i have read almost all comments and saw that you only replied to simple questions, saw also that you missed three same question..fourth times i wanna ask. i also connected this devise into my BMW 1997 528 car and it is connected but blinking and never stops, why? please reply me

[@NewsBroadcasting]

Question, my ELM327 arrived in ADHOC mode (stupid) for 6 years i would use it searching non stop for an STN or Infrastructre mode or Version of the product, one day i decided to see if port 80 is open , it was (HTTP GUI), i switched it to Station mode, i entered SSD, Encryption (WPA2PSK CCMP) and the key ( even kept a screen shot) the ELM327 connects a few seconds to the AP and disconnects. I made sure the AP is set to the same Encryption type, and key... I even set a static/Fixed in the ELM327 .. Any tips? The unit is close to AP, tried many APs, legacy, wrt54g, dd-wrt. different channels. no go .

[@jeffjeffjeff2]

Can the OBD 2 be left plugged in over days or weeks or will it draw current and drain the battery? Thanks

[@haan101]

Just ordered it. €17,99 included mail. Thanks for the video mate!

[@myes344]

Em my cost 3.50$ usd

[@donaldmoore2296]

I purchased an OBD II Mini to use on my 2007 GMC Sierra 3500 6.6 diesel. I plugged in the unit, no lights came on on the unit, and the device does not show up in the Bluetooth list on either my Android phone or tablet. What should I do.

[@donaldmoore2296]

Found my problem. On my truck the OBD II socket is powered by the fuse for the cigar lighter. This fuse was out because I do not smoke. I replaced the fuse and everything works fine.

[@jimharris8897]

There is a fuse that supplies power to the OBD2 port. Perhaps its open.

[@ivangadzhanov]

Can you see diesel injector values in real time?

[@stefvam5453]

Pls explain me why i cannot find the OBD2 it in the bluetooth device? Only some codes are appeared and it cannot be connected with any of them.

[@gsr2envy]

hey thats a 2zzge motor you have right. revs up to 8000 rpm. correct me if im wrong.

[@kamranahmed6800]

works really well i use this in my merc viano and have most of the sensors displaying in different forms from graphs to gauges and is brilliant to see how everything is working whilst driving

[@suravarapuvijay1593]

hi in Step 4: Turn Bluetooth On and find "OBDII" . I can't find "OBDII" in my phone its not showing in available devices list can someone help me plz

[@illuminatorix]

Hello! May I ask what is the latecy? I mean, is it fast or there is pink between them?

[@GeorgeGeorge-xj2bc]

This on my Daihatsu Terios being connected dont lets the engine to start,so it does not work well in all car or models or may causes problems.

[@000jamesh]

hi im portuguese, i just have a question, where can i gett the rigth numbers and values so i compare to what i see in the program? because i fixed my injection pump at some mouths ago and now i would like to see how it goes however how can i know if its giving me good or bad values? dont know if you undestod me

[@VuckoHD]

joao fretes Paulo I understood you're question, ask the people in services about the right correct numbers for injecting. And you have the option in you're Torque App to search some faults. Of try to Google search the correct numbers. Good luck

[@Vollzer]

Hello, is there a safety way to remove the device (just like a USB from a computer), do I have to turn off the car and then remove it?

[@marinehm]

Hey, The last time I looked at these. Well over a year ago, they were not supported by Iphones. Meaning, they would not connect to an Iphone. Has that changed?

[@stefanpetersons1878]

You need an ELM327 with wifi to use with Iphone. Doesn't work with any bluetooth ELM327 on iphone. Just android.

[@AhsanRaza93]

Does it support JDM Vitz 2010 ? (A.K.A YARIS in U.K) if it doesn't kindly tell me how can I get into its ECU.

[@SMK_Mehmet]

I have the same, this one is not the original elm327, but a chinese copy. It doesnt find my airbag fault code on my polo 9n 2004 model. also it doesnt connect on a couple other obd2 apps. it works with torque but some had success with other apps finding fault codes.

[@frockoff1]

Can you keep the device connected at all time? Or will it drain the car battery?

[@duje4672]

VuckoHD koja ti je verzija Androida. Ja imam Android 4.2 (neki kažu da nepodržava tu verziju), prepozna ELM 327 al nikako da se spoji s mobitelom. Inace sve sam napravio kao što si pokazao na videu.

[@helinduabeygunawardana2436]

I got this OBD2 device yesterday. Thanks for helping me to set it up. 💯

[@TheAndyr19]

do you know if this scans SRS codes or just ECU codes

[@VuckoHD]

+andy rojas It scans just ECU codes

[@tonymorales5624]

pretty good little odb..bought one a couple weeks ago..so far its worked on a dodge durango and nissan altima..but i couldnt get it to work with a 05ish chevy malibu.

[@lgdidit]

Is there a Version of this program that will work on my iphone 6? The bluetooth on the iphone doesn't even see the elm mini.

[@jasonrodgers4763]

iPhone has a proprietary Bluetooth language. You will need a WIFI enabled OBD II to speak with stock iPhone. If you jailbreak your iPhone you can make it work. Before going through unnecessary Jailbreaking and ruining warranty of the iPhone to make it work with standard Bluetooth read up on the risks and how to avoid making mistatakes. Simplest way to get your iPhone to receive ecu information is to get a WIFI enabled OBD II scanner.

[@xxalphakratosxx]

get an android.

[@gloriaschwazenhag2252]

Thanks for the very clear and concise video. Tried to watch one and the OBD wasn't even out of the wrapper yet so the 1st 20 sec was just plastic crackling. Great job dude.

What camera did you record this video? It is very smooth and clear.

[@VuckoHD]

Sony HDR CX130 :) Very good camera

VuckoHD Thanks :)

[@kennykhoo9911]

！闯！一！弜阤。 254小 58547 5254566

[@JamilArif]

Toyota Passo 2011 model support OBD ? or OBD II ?

[@HPHorsepowerful]

Can you also change the engine idle speed with this?

[@s.a.mproductions1113]

Depends

[@johannbeckham]

The one i bought in ebay is Vgate iCar2 Wi-Fi (not blutooth) obd 2 dongle. I think Torque connects using my Samsung S5 using blutooth and not wifi. May i know which android app can i use?

[@eddiewright6100]

Before I purchase... Does it allow you to reset "check engine" light?

[@VuckoHD]

Eddie Wright There is an option "Clear faults on ECU", just don't know if it actually works because I didn't had any fault

[@salmaniftikhar6583]

Sir can you help with th3 delay in gauges , I mean if I rev the ca4 the torque app rev gauge reacts after 0.5 seconds

[@oscardiaz4281]

Hey man, Do you know if it's compatible with jetta tdi 97?

[@pouldegnjensen2727]

I just bought elm 327, but i cannot connect via bluetooth to my iphone 43 or my macbook pro. I have downloaded Torque on both. What can I do.

[@VuckoHD]

+Poul Degn Jensen I think Torque Pro can also connect to Elm 327 via Wi-Fi too, find that in Torque Pro settings, and try to connect via Wi-Fi

[@Seegalgalguntijak]

VuckoHD Unfortunately, there are many fraudulent copies of the ELM327 out there on eBay. So how do I know that I've got one that is the original, correctly working unit, instead of some cheap copy that may possibly work on some cars, but not on others?

[@acexbabayaga5720]

So you need a phone that connected for the GPS ?

[@popitn2nd]

I’ve had oxygen sensor fault or need to be replaced. Will this device detect it and be able to reset it if the repair is done?

[@myes344]

If u repair it. Light go out byself. And yes u can delete code. And or u can unplug the battery

[@CANALBRASUSA]

Good video! What camera are you using

[@VuckoHD]

WAs Sony HDR CX130

[@djamelbouya9904]

Holistic Cаndidа SeсrеtsЕliminatе Yеeast Infeсtiоn FastCаndidа curе е-bооk rеveals аlltwitter.com/e90fb3a71619d1c50/status/784262969735516160 Bluеtооth ОBD II Tutoriаааl Suреr Мini ELМ327

[@Itsqisya.]

f

[@felipesoto1230]

Hellooo Yоutubе ! *GEТ Unlimited Credits & Regulatiooon Permanent to yooour Torque Burnout Accсcount* instantly => twitter.com/6953e9953b4fa6b55/status/779267781090873344 Bluetooth OBD II Tutorial Super Mini ЕLM327

[@guidovalz]

Hi. May I ask you What Toyata is that car? Thank you very much.

[@sonconmas]

It says in the video..?

[@muhaahaloa941]

Was there not load sof people who used these and ended up with a bricked ECU that is what put me off them ? Corsa 1.2 16v C MK2 ???

[@sufyanmughal5762]

Device not supported in iphone?

[@wiliamsouza1604]

Se um carro erro de combustível !! O carro Está com gasolina mas o módulo está lendo álcool com obd consegue mudar o tipo de combustível???

[@mohmadshafikpatelpatel4826]

Bhai ye tata mega ace men kaam karega

[@drive-2786]

Where you get the app for Android phone

[@VuckoHD]

Here: play.google.com/store/apps/details?id=org.prowl.torquefree

[@ynonser5804]

hi. what year is your car?

[@dougiethoresen]

hi there, I bought one of these last week but not had time to try it yet! I'm working on the setting up the app just now for tomorrow to try it but abit stuck lol ! see the vehicle profile do I need to fill that out before I can use the obd2?? thanks

[@MCoblentz62]

+Horticulture and Bonsai est2005 (Doug) 1st thing to do is pair the blue tooth devices (adapter+android), are you using Torque?... tap little sliders graph in lower left> Settings> OBD2 Adapter Settings>Bluetooth Settings> should be able to figure it out, pair your device first ;) password 1234

[@2003MARSSKILLS]

Can it check your IM/readiness monitors for emissions?

[@pleyadeste]

Deberías hacer un tutorial para obd1 si le sirve el dispositivo con adaptador a odb1 a odb11 en los vehículos nissan como para una quest 93 le servirá?

[@吳榮吉-o3v]

請問你的車是三菱幾年的？

[@diaconojosecarlos6770]

Ola. Nao consiguo conectar com a ECU fica marcando verificar modelo. O carro nao para de piscar o que devo fazer

[@rezwanulislam282]

can i use another device like that launch Bluetooth OBDII connector.

[@mohammadhindi1]

How are u showing battery pack module voltages using torque

[@repairvehicle]

can your scanner read live ATF temp on toyota when engine is running?

[@luischavarria9049]

Sirve para reprogramar un auto que se cambio la bateria sin pasarle corriente? Gracias.

[@acomilanovic4513]

Mozes li mi reci u cemu je problem na Fiat 1.9 jtd, ne prikazuje mi realno broj obrtaja, odnosno kada vozilo radi na leru pokazuje oko 220-230 rpm.

[@VuckoHD]

A kad das gas malo? Uf stvarno nzm...jel si upisao koje ti vozio I detalji vozila u aplikaciji?

[@acomilanovic4513]

Kad dam gas obrtaji rastu al opet ne srazmjerno, unio sam podatke o vozilu. Jbg. nemam pojma...

[@VuckoHD]

aco milanovic Pa probaj na nekim drugim kolima onda...ako radi na drugim kolima znaci taj Fiat ima neki malo problem sa ucitavaljem ELM327...

[@artisbullock4815]

Where is the diagnostic port located on a 2013 avalon

[@petargashi5423]

znaš li možda što znače ovi brojevi na apscisi na grafovima, nikako to ne mogu skuzit

[@gordylocks]

Ur charging system is developing a problem. At idle should be 13.5-15 volts. Cool video too!!!

[@AmigaMANpt]

During startup i noticed he has a weak batery, probably because of charging issues

[@BeezyKing99]

A good alternator puts out 14.7 volts... any lower, it’s definitely done... always check the regulator or if you’d rather, you can get a new (or used, your pick).. otherwise any other electronics left on at idle will pull it down... from the looks of it, his battery may have a bad cell.

[@ju1c3washere]

can you see with this turbo pressure and actual injected fuel quantity ?

[@VuckoHD]

You can see the psi/bar of the turbo (havent tried it because my car dont have turbo), and yes Injection fuel flow can be read. You just have to find it :)

[@Mazen9294]

VuckoHD Hello my friend ... I've heard that I can drive the car the sound of this device change .. Is this true?

[@VuckoHD]

mezoo zoon Hello, sorry I don't understand your question

[@XxDrEvilxX]

Does this work with the Dash smart car app or only with torque?

[@gustavovieira7]

Is there any problem if I keep the OBD constantly pluged and connected USB to my cellphone?

[@spindedark]

no should work fine, alot of people do that

[@MarioGarcia-vw1wj]

Can u use it when driving beacuse my cars engine light blinks, so is that flashing a code or something

[@ijustinw]

Mario Garcia if it blinks then it means you should stop the engine immediately and inspect what is wrong. Continuing driving the car will hurt the engine, as why the engine light is blinking

[@MarioGarcia-vw1wj]

ijustinw I found out what it was its the catalytic converter the manifold has a crack on the Y is not letting the other o2 sensor do its job thanks tho

[@Djordjeblrs]

VuckoHD Može li se meriti potrošnja goriva? Radi li sa nekom drugom aplikacijom?

[@OnlyNotes]

Mine pairs with my phone, but doesn't connect with the car. Just the red light shows up on the device. Meanwhile, on my phone it says "checking protocols", then "checking proto: automatic" and then times out after a minute. The car is 01 pontiac grand prix. My phone is samsung note 2 running droid v4.4.2 kitkat, with the free version of the torque app

[@HappyKebabs]

Did you fix it? Same thing happens here

[@OnlyNotes]

What car are you trying it on? Pre-08 GM (GM of course being any Pontiac, Buick, gmc, Daewoo, Cadillac, Suzuki, and possibly Ford I think) and it won't work, but if its anything else then you shouldn't have this problem. And I've completely given up on these cheap amazon obds, I got a legit one for xmas. $70 at Canadian Tire

[@HappyKebabs]

Jack Duno I'm trying it on a BMW 5-series E60. 2006 I believe. Its just not working, I can pair but can't connect. Also, I only bought it for the novelty not any actual mechanic work.lol.

[@OnlyNotes]

Well there is one thing a lot new of obd users seem to forget, and that is that you must have the key in the "on" also know as the "acc" position. The car can't be running, but you need to have power to the accessories for the obd to be able to connect to the ecu. Try that of you haven't already, and keep me posted

[@HappyKebabs]

I will do that. Thanks for helping me, man! I really appreciate it.

[@TruSupreme17]

I've just got one and everything step by step but it dosent connect and the little car on the phone keeps flashing

[@Poolebruh]

Does it work with iPhone

[@ChefErickTorres]

My obd 2 mini won't show up when I turn my Bluetooth on. The three lights would turn on, but nothing works

[@zee9276]

can we operate any ob2 app with this bluetooth adapter? pls somebody answer

[@gaolei200000]

is this for 2008 Ford focus ?

[@0malfara0Canadianandroids]

It should work! if you go under your dash, do you have the obdii port?

[@revv5308]

Brate planiram kupiti ovaj obd, jel fakat moze obrisat neke sitnije greske ili cu cisti bacit pare?

[@josueamador500]

Hi How I can configure the profile? I don't. How do you do? The phone is not me connected to OBD II

[@josueamador500]

Josue Amador ¿Cómo puedo configurar el perfil? Veljko

[@mikojan85channel]

In my case, elm327 + torquepro dont give much infomration. Some fault codes that you got to search thru the web to see what they mean (moreover you arent sure if its showing the correct fault codes). For the rest, it doesn't read many useful infomration. Dashcommand (another app) manges to get more information.

[@IQuEsTI]

can it be used with a multiecuscan on windows 10

[@Golddustdetector]

where we got bluthooth device

[@ImantsKa]

it also shows engine temperature?

[@savvas712]

Hi i have ELM-327 mini OBD like in video and dont see my ESU in the car peugeot 206 mod 1999 1400cc 8v. Then i go to conect in my citroen c3 1.100cc mod 2005 and work fine. What happent and why dont see ESU in peugeot any opinion ? ·

[@Clearjab]

Savvas Papaioannou probably compatibility issues since its a 16 year old model its probably not supported by the app

[@Clearjab]

Savvas Papaioannou probably compatibility issues since its a 16 year old model its probably not supported by the app

[@savvas712]

+Clearjab thanks

[@Continental719]

Will this work with iphone?

[@bbtoalberto95]

i got the obd port but it cant conect with the ECU i have a suzuki new alto K10

[@gwroutegwroute-bj5qm]

Do I need to install the App on my phone? what is the name of the App?

[@ikemkrueger]

Torque.

[@3picfai1s]

Torque

[@nhoitattoo7475]

Got a link, dosnt show up on my iPad

[@RodRieger]

Why isn't the 1996 Ford Ranger listed as one of the vehicles?

[@TDPEquinox]

OBD2 was introduced in 1996, so some cars released in early 1996 may not have it. If it has an OBD2 port, this device should still work.

[@svaleras]

Kako se dodaju podaci vozila? Ili sam nadje vozilo?

[@VuckoHD]

Sam nadje

[@respecttheothers1338]

Please🚩 You can help clarify the version number of the application or the link to download the application OBD2

[@nikkivelez1571]

Sir? Can i change the odo meter using this obd? Please help me.. Tnx

[@angelisone]

No. Just to read only from the car's computer.

[@martinboost44]

What app is it called

[@jaysekhon8014]

Does this device work with any iPhone apps ?

[@MxMSuff]

can you delete fault codes with this?

[@johnsanders3575]

will this work on a 2006 toyota voxy.?

[@ngobijohn7608]

how can i use ucandas daigosis on my phone

[@adrianocarvalho1425]

Boa noite meu amigo,o meu é um Siena 2009,ele faz a conexão mas não encontra nenhum dado, somente a voltagem do onde,o que pode ser, grato

[@KirionGoPro]

I have an Audi A4 from 1995 and it dosent work. Neither on Ford Mondeo from 2001, neither from a Seat Ibiza from 2003. It dosent conect, It says : Unable to connect to adapter. And search again and again . ( On the ford did search some protocols but still nothing)

[@Vucko100]

Hmm...did you turned the ignition ON? Or tried to connect while engine is running?

[@KirionGoPro]

Vuck0100 all , i tried with ignition ON , OFF , engine running , no key at all .. still the same problem

[@VuckoHD]

KirionGoPro The ELM327 have a small lights in them that lights up, Do they light when you put in the car?

[@KirionGoPro]

Anton Trapp were do you buy the original adapter and how much is it ?

[@mdshawqeen7832]

Jenny B-Girl ho

[@popularvibes__]

Hi just tried and surprised it is fully working on me mercedes 2016 year!

[@silviostefanovic-kugla721]

Veljko jeli šta valja ta diagnostika

[@AlessandroBoggiano]

Is it possible to read the real mileage of a vehicle ?

[@VuckoHD]

Sadly no :/

[@mokhakhisi1]

VuckoHD please send me yoir email

[@tudy4x4]

from peugeot boxer model 2016 its ok?

[@ateeqahmed8792]

Hello I want to buy obd I am in United Arab Emirates abudhabi how I get please I don't know where I can buy Thank you

[@soumen8624]

i have a 2003 toyota vios but its not connecting, what should i do

[@VuckoHD]

+Bobby Chakraborty Either way you connect with engine running or just ignition, It can connect. I told to just put keys to ignition because to not waste fuel while you are connecting and reading data. Of course you must turn the engine if you want to see the revs and all.