I am italian and I would like underline that you speak in a very slow and clear way, this is very important for non-native English speakers. About the about the topic and how it was treated congratulations. Good job. Thank you. I will closely follow your activities.
@BINARYUPDATES Жыл бұрын
Thank you Mr. Giancarlo! 😃
@oliviapluim73062 жыл бұрын
Awesome tutorial! You explained each step so well and focused on what each part did! Thanks a ton!!
@BINARYUPDATES2 жыл бұрын
Hi Olivia, Thanks for your words for Blynk video lesson. Wish you a good luck and best wishes!
@DIYPhil Жыл бұрын
Finally, I found a tutorial that I can follow and understand. Thanks
@BINARYUPDATES Жыл бұрын
Hi DIYPhil, Glad it helped!
@kakadvaprimaryschool Жыл бұрын
Umeshbhai I watched many videos but you taught me so easily and patiently that I could learn a lot and complete the project.Thank you
@BINARYUPDATES Жыл бұрын
Hi, I'm glad to know you've completed your Blynk IoT project with NodeMCU ESp8266. Thank you so much for your words. Good luck and best wishes!
@dolsemiyano2 жыл бұрын
HI HELLOOOOO. You might think this is nothing to you, but I want to thank you so much for this video.. It really helped me a lot, especially because I'm a beginner in arduino and there are not so many tutorials yet showing how to work around the new blynk app. I hope you have a great day, weekend, month, year and forever wherever you are I'm so excited right now!!!
@BINARYUPDATES2 жыл бұрын
Thank you very much Elina. I'm glad you find Blynk IoT video useful Have a beautiful day Best wishes Team BinaryUpdates
@robdavidowitz64282 жыл бұрын
OUTSTANDING!!!!! One of the best, if not the best tutorial I have ever followed. I cannot wait to try your other tutorials.👍
@BINARYUPDATES2 жыл бұрын
Thank you very much Mr. Rob Have a beautiful day Best wishes
@MrTellyBelly2 жыл бұрын
I love it when you express your enthusiasm becuase I feel the same way. :-)
@BINARYUPDATES2 жыл бұрын
😊 thank you
@paulwebb41462 жыл бұрын
Thank you for your very good and well explained tutorial, with easy to follow details. I'm planning to install a YF-S201 flow sensor with a D1 mini to measure the water usage on our RV. A lot to learn yet, but you have given me a good start. 👍
@BINARYUPDATES2 жыл бұрын
Hi Paul I wish you good luck and best wishes. I'll explore about YF-S201 flow sensor in my free time. And if possible in future will make some video around NodeMCU ESP8266 and Flow Sensor interfacing. Have a beautiful day
@uniteUsk7 ай бұрын
you really helped me out, especialy at 23:04 where I was starting to struggle to control from web dashboard and it was not working. I just found myself laughing too.
@BINARYUPDATES7 ай бұрын
Hi @uniteUsk glad to know you enjoyed this Blynk App video tutorial. Even when I tried Blynk for first time I was surprised when find out that how web dashboard is hiding in Blynk IoT platform. Thanks and have a good day!
@sachinthadahanayaka9061Ай бұрын
Great explanation.
@BINARYUPDATES9 күн бұрын
Hi Sachin, thank you! Glad to know you find this Blynk tutorial with NodeMCU ESP8266 useful. Best wishes!
@aimanhaziq750 Жыл бұрын
Super convenient. It works for me!!! Tqsm
@BINARYUPDATES Жыл бұрын
Hi Aiman, welcome 😊
@vivinsr9647 Жыл бұрын
Thanks for this video :) I have connected to one wifi .. it works fine ..but..Can you tell how to connect nodemcu to another wifi ?
@user-ic3wm3pb2m Жыл бұрын
Thank you for your teaching。It's very helpful.
@BINARYUPDATES Жыл бұрын
Glad it was helpful!
@eyuelfrew7052 жыл бұрын
we need more bro...keep doing this
@BINARYUPDATES2 жыл бұрын
More to come!
@renatourbinati42 Жыл бұрын
Thanks for the contribution.
@aargee77 Жыл бұрын
Awesome boss!! Worked like a charm. Thank you
@BINARYUPDATES Жыл бұрын
Glad it helped, Congratulation!
@volpii4 ай бұрын
woooowww, millions of thanks to youuuuu
@695renzo8 ай бұрын
Very clear explanation but I can't use your "Blynk-NodeMCU-ESP8266-main.zip "because in the file is not considered a zip file
@BINARYUPDATES8 ай бұрын
Thank you very much. In this case you can use built-in code provided by Blynk which comes as a part of Blynk Library Installation. Otherwise you can just replace default code with my code in only one file. I hope this may help you. Good luck and best wishes!
@pacoryu2 жыл бұрын
So well done, thanks a lot! It worked : )
@BINARYUPDATES2 жыл бұрын
Hi Francisco, Great to hear!
@adilabusafa Жыл бұрын
أهلاً وسهلاً ومرحباً-يتعذر التعليق-لا أعلم .
@andremartines5061 Жыл бұрын
Congratulations for the information so well explained. In my case, an ATMega2560+esp8266, I can't create the device directly or create the template after recognizing the device on the CelPhone. The App allows the configuration of the Wifi Network, user and password, however, in the last step, it exceeds the time and does not enable the card to be used on the network. Do you have any more tips? Grateful.
@kelvinkweka5742 жыл бұрын
I fail to make it i got some problems in sending the codes to the NodMCU but the lesson was good
@kshitijsingh4468 Жыл бұрын
Amazing job explaining dude... Thumbs Up from my side!! 👍
@BINARYUPDATES Жыл бұрын
Hi Kshitij, Glad it helped!
@user-nh9hj4wz7s2 жыл бұрын
WOW~! Thanks for precious video~!^(^
@BINARYUPDATES2 жыл бұрын
Thank you too
@kctay32532 жыл бұрын
Very easy to understand, just built my 1st Bylnk controlled external LED using Wemos D1 mini development board. Can turn on/off LED either from mobile phone or laptop. Thank you.
@BINARYUPDATES2 жыл бұрын
Congratulations Mr. KC Tay. Keep on going Best wishes Umesh
@midoriyaizuku15352 жыл бұрын
sir can share the code to blink led
@PalakDhama-01 Жыл бұрын
Sir i am making a model name agriculture machinery but i am not getting that what is the virtual pin for the switch for phosphorus nitrogen potassium all these will be controlled by blynk with solenoid valve
@BINARYUPDATES Жыл бұрын
Hi Palak, as I may not guess your entire project. But all I can say is Virtual Pin is a concept from Blynk IoT platform which will let you control any analog or digital pin of microcontroller like ESP8266 or ESP82 etc. Now to control solenoid valve you can use virtual pin as i've used in this example project. Check my relay control video lesson as well to get idea how we can easily replace LED and instead control high voltage devices. I hope this may help you. Good luck and Best wishes for your project!
@jamesmelemede56104 ай бұрын
good video
@PallavAggarwal2 жыл бұрын
Great demo, Umesh!
@BINARYUPDATES2 жыл бұрын
Thank you so much
@ethanallen9706 Жыл бұрын
Well done. Well Explained.
@BINARYUPDATES Жыл бұрын
Hi Ethan Glad you enjoyed it
@AntoniusJeffryGunawan Жыл бұрын
Error compiling the script. you have to define 'device_name' where as from blynk you get 'template_name' instead
@anokhautomation44532 жыл бұрын
Nice tutorial and Well understanding.
@BINARYUPDATES2 жыл бұрын
Glad you liked it. Thanks Mr. Ramesh
@mrunalgolatkar4079 Жыл бұрын
Thank you
@mohammedajmal42642 жыл бұрын
sir i have a simple project . in which the led should glow only when internet is available through wifi .. please can u give me idea . please help sir
@rifkikamali5150 Жыл бұрын
THX a lot friends🖐️
@BINARYUPDATES Жыл бұрын
Welcome friend!
@subakkkk5032 жыл бұрын
sir, can u teach how to make a connection that have 3 led..I have try it but the coding was error and my circuit also not right
@BINARYUPDATES2 жыл бұрын
Hi, I will try to make video on the requested topic to control multiple LED from Blynk IoT Platform and NodeMCU ESP8266. Thanks for your patience. Good day
@subakkkk5032 жыл бұрын
ok sir...but really hope u can give as soon as possible because my due date asignmment is around the corner...really appreciated your consideration🙏
@manfredbogner97992 ай бұрын
Sehr gut
@subashv768 Жыл бұрын
Thank you very much
@fpsmresh13932 жыл бұрын
Hello That Was Very Good Helped Me Very Much...... I was asking can i run another devices (for our project) using a wire connector with the nodemcu
@BINARYUPDATES2 жыл бұрын
Yes you can!
@rohitmac6178 Жыл бұрын
If we need to add more buttons do we need to program it or add it via cloud ?
@BINARYUPDATES Жыл бұрын
You need add one more button in Blynk dashboard. And at the same time add code for another button to control additional GPIO pin of NodeMCU ESP8266. Good luck and best wishes!
@syed_shahir Жыл бұрын
hey the toturial was going so smooth untill i faced an error of template name and id its giving me error , and i have copied the as it is from the blynk console
@BINARYUPDATES Жыл бұрын
Hi Syed, please check Arduino code or create project from example section in IDE and then edit Blynk template name and other details as shown in video lesson. The issue could be in code while you've copy and pasted otherwise download code from Github link in description section. I hope this may help. Good luck and best wishes!
@syed_shahir Жыл бұрын
@@BINARYUPDATES the issue have been resolved as I was new to this so I didn't added the device in my template then , now the project is working smoothly
@syed_shahir Жыл бұрын
@@BINARYUPDATES now I want to have a joystick control so is there any toturial or guidance for that?
@imsujit_com10 ай бұрын
You said to check the description for your sample code, but i can not find any link for code in the description
@shivamsp4274 ай бұрын
mine was not working
@coldzackrane7910 Жыл бұрын
May I ask what devices you used? Is it only NodeMCU esp? or you also have arduino hardware? Thank youuu
@BINARYUPDATES Жыл бұрын
Hi, I've used NodeMCU ESP8266 to communicate with Blynk Cloud
@abhishekkarpe130410 ай бұрын
Sir can you provide on how to connect node mcu on breadboard
@BINARYUPDATES10 ай бұрын
Hi Abhishek, please search on my YT channel I have video on "how breadboard works". This our lesson will guide you on how to connect electronics component. I hope you'll find it useful. Good luck and best wishes!
@DASUNImadhushika2 жыл бұрын
Great !!! thank you very much 💖
@BINARYUPDATES2 жыл бұрын
Welcome!
@jadehwang89402 жыл бұрын
thank you sooomuchhh
@sulaimanbaigmirza16798 ай бұрын
Can we use the same code for controlling LED bulb
@BINARYUPDATES8 ай бұрын
Yes, you can use this same blynk project and code to control light bulb using relay module. I have already made video to show how to do it on my channel. I hope you'll find it. Best wishes!
@eng23218 ай бұрын
Hi can you help me pleas , I tried all the steps and they are all correct, but when I try to control the devices via the phone, it appears offline ? what i do 💔
@gaurangthaker38292 жыл бұрын
Great explanation
@BINARYUPDATES2 жыл бұрын
Glad you linked it, thanks Gaurang!
@Shubham-po2tp2 жыл бұрын
@@BINARYUPDATES Please tell me how to use sensor IR sensor Please share any link
@kadriyenurdoganalp2602 жыл бұрын
While you came out as nodemcu in the tools section, I got ardunio uno in the tools section. What could be the problem?
@BINARYUPDATES2 жыл бұрын
Hi Kadriye, maybe because NodeMCU-12E ESP8266 not been properly selected in Arduino IDE especially in tools section. I hope this may help you. Good luck and best wishes!
@malikarslan6955 Жыл бұрын
How can i change wifi credentials which are already stored in the memory of Nodemcu... I try to change these credentials by using blynk app but it didn't find any device when blynk try to connect nearby device. How can i change it.?
@BINARYUPDATES Жыл бұрын
Hi Malik, while changing WiFi credentials next time Press and Hold Flash button on NodeMCU for 5 Seconds and also check serial monitor. It shows memory been cleared away. So later when you configure new wifi credentials in blynk app, it will work. I hope this may help you. Good luck and best wishes!
@malikarslan6955 Жыл бұрын
@@BINARYUPDATES Not working.. when i press flash button for 5 sec it show's the current status like... Device: Blynk Water pump Automatio-MYJ9 Firmware: 0.1.0 (build Jul 9 2023 07:16:22) Token: hPLW - •••• - •••• - •••• Platform: ESP8266 @ 80MHz Boot ver: 5 SDK: 2.2.2-dev(38a443e) ESP Core: 3.1.2 Flash: 4096K Free mem: 30152
@iqbalramdanprayoga85892 жыл бұрын
Verry good, when will upload the tutorial for ampere sensor with nodemcu and blynk app?
@BINARYUPDATES2 жыл бұрын
Hi Iqbal, I'm working on this video where I will add LM35 sensor with ESP8266 and send data to Blynk. Will be published in 2-3 weeks. Thanks for your interest and wish you good day
@advithgowda6202 жыл бұрын
very good explaination sir , can we do it easily with digital pins ? i have some problems regarding it
@BINARYUPDATES2 жыл бұрын
Yes, its not that difficult you can even consider to refer Blynk official webpage for instructions. Let me know if you have any specific question where I can help you with. Thanks
@danielarellano4263 Жыл бұрын
Can you help me? Please. Compilation error: user_interface.h: No such file or directory
@BINARYUPDATES Жыл бұрын
Hi Daniel, please make sure you open file from example project of blynk. And after doing changes all the header linked properly. Its an issue with where header file is missing. I am not sure which code you're using for project. Did you download from my github or opened "edgent_esp8266" example project?
@erimelody41202 жыл бұрын
great video. would you explain the connections of the led with the Node and can i use Arduino mega 2560 instead of node mcu
@BINARYUPDATES2 жыл бұрын
Hi Eri, LED is connected at D4 which is GPIO2 Pin on NodeMCU ESP8266. So you must connect longer leg of LED means anode to D4 Pin and shorter leg of LED means cathode to connect to GND Pin. As far as Arduino Mega2560 concern I suggest consider using Arduino IOT Cloud platform as well if in case Blynk doesn't support Mega series of Arduino Board. I hope this may help you. Good luck!
@erimelody41202 жыл бұрын
@@BINARYUPDATES yh thats real helpful .thankyou very much
@Ammuxz076 ай бұрын
You mentioned device that device is mobile or laptop...
@dipanshudhote56717 ай бұрын
Bro my esp8266 board not supporting blynk edjent, earlier it's working fine but then not working even I have changed the board but same problem code uploaded but it showing AP URL : Blunk. Setup
@nguyenkien42872 жыл бұрын
nice video , thank you
@BINARYUPDATES2 жыл бұрын
Glad you liked it!
@kala75602 жыл бұрын
Thank you so much. and I really want to know to control another pin as output. How can I control multiple pins?
@BINARYUPDATES2 жыл бұрын
Hi Kala, I'll try to cover in next upcoming Blynk video lessons. Thanks
@gnanasekharvemu378 Жыл бұрын
Thank you for sharing the information. I have a doubt, In serial moniter how can you say that 115200baud should select can you please explain.I am using esp32 wifimodule.
@BINARYUPDATES Жыл бұрын
Hi Gnanasekhar, its because in Arduino code for Blynk we used baud rate 115200. That's the reason, we have to set Arduino Serial monitor to 115200 while reading data. When it comes to ESP32, it doesn't change much except choosing correct device while creating blynk template in Blynk Dashboard while creation. I hope this may help you. Good luck and best wishes!
@faisalaziz5582 Жыл бұрын
The video is awesomely explained. I just have one question. Is there any other way to connect my ESP8266 to my home wifi without using my mobile phone (as I am around 2000kms away from it 😅😅) and then use my phone to control it remotely ?
@BINARYUPDATES Жыл бұрын
Hi Faisal, yes when can connect ESP8266 with home WiFi. As you may have noticed we only used Blynk Mobile App to setup the wifi credentials in ESP8266. Once Its configured and NodeMCU connected to Blynk IoT over internet then you can move anywhere with your mobile phone. You still can control remotely your devices at home 2000+ km away from your same mobile phone and Blynk App. I hope this answers your questions. Thanking you!
@Toyzz117 ай бұрын
Port 3 is not coming sir but port 4,port 5, and port 6 ,and port 7 are visible what should I do to correct this error plz tell me sir
@sultanmubin_100 Жыл бұрын
Bro your Indian but your English is very good , when i press button from app it take 30 to 50 sec delay to led turn on /off
@BINARYUPDATES Жыл бұрын
Hi, it happens sometimes when we use free account and traffic is high on Blynk Server. It delayed response between ESP8266 and Blynk App. I hope this answers your question. Thanks
@adnanahmadknowledgevideo9 ай бұрын
it is showing offline on the blynk website even though I have entered correct auth code and the board is connected to my phones hotspot. But still it is showing offline. How do I solve this problem please help me
@BINARYUPDATES8 ай бұрын
Hi Adnan, press the RESET button on ESP8266 NodeMCU and check on serial monitor if it shows Blynk is connected. In case, if failed to connect check WiFi credentials in code for any typo mistake. It happen very often and try re-upload again. I hope this may help. Good luck and best wishes!
@xClyth2 жыл бұрын
Hi good day! i have a problem theres a error in clientSSL->setTrustAnchors (&BlynkCert) ; and the message says "OTA.h:56:14: error: class axTLS: WiFiClientSecure' has no member named 'setTrustAnchors'." i need help on this pls..
@faromail49712 жыл бұрын
Cómo puedo a partir de una entrada digital del nodemcu generar que el smartphone vibre y suene como una alarma. Quiero monitorear una alarma domiciliaria con blynk. Se puede?
@milafontys8137 Жыл бұрын
Hello :) Thank you for the tutorial! I have issues when uploading the code from arduino IDE as I get an error message saying "Compilation error: #include nested depth 200 exceeds maximum of 200 (use -fmax-include-depth=DEPTH to increase the maximum)". Do you have any idea how I could make it to work? Thank you
@BINARYUPDATES Жыл бұрын
Please check you copy all project files properly while using blynk project files
@venkatabangararajucherukur78272 жыл бұрын
When I connecting to nodemcu using blynk iot it is not showing blynk devices and it searching for more time it is not connecting to my blynk app
@BINARYUPDATES2 жыл бұрын
Press RESET Button on NodeMCU and check response on Serial Monitor of IDE. Also make sure your phone is not using data network. Apart from make sure you've not missed any step as shown in video. Good luck!
@efemert79187 ай бұрын
I HAVE Compilation error: exit status 1ERROR WHAT SHOULD I DO
@rohitmac6178 Жыл бұрын
If there is a power cut and turns on , will it automatically get to previous mode or it'll be in always?
@BINARYUPDATES Жыл бұрын
Hi Rohit, you can reset NodeMCU ESP8266 and then test Blynk App. I hope this may help you. Good luck !
@deepakmourya950811 ай бұрын
from were i can get a code reply fast as possible
@BINARYUPDATES11 ай бұрын
Hi Deepak, you can download Blynk project files from my GitHub page. I think you can find the link in video description. Good luck and best wishes!
@mrlifefacts14502 жыл бұрын
How to get auth code, I didn't get it in my mail ?
@BINARYUPDATES2 жыл бұрын
In new version of Blynk, we don't get any authentication token. Instead in Blynk2.0 you'll get template id and template name. This information need to add in code.And for Auth token, you can copy in web dashboard of Blynk. I hope this may help you. Thanks
@josevicentemunozdiez3872 жыл бұрын
Hi there, First and foremost, very detailed manual, congrats. Sadly, it does not work to me. The thorny matter is the connection between mobile application and the NodeMCU. As you have in minute 18:53 in your video, I see the wifi broadcast by my NodeMCU thanks to the previous uploaded Adgent_ESP8266. However, once I click on the wifi (Blynk NodeMCU-0A131 in my case) nothing happens. So, no way to transfer to the NodeMCU the wifi and password to be connected to. On top of that, once I open the mobile application and I log in, I get a message that does not appear in your case: "Now go to your computer. Check your inbox for the code and instructions on how to get your device online" . The question is what on earth inbox is the application talking about? I went on my blynk online profile and there is not inbox!! Neither in my email inbox. Programmers.... :-) I guess that there is something new in the last version of the app for Android. By the way, I am using blynk IoT 1.5.3 on Android. Thanks
@josevicentemunozdiez3872 жыл бұрын
Well, after being fighting for a while, I could make it work. I would like to clarify some tricky things from this good video tutorial to make it more solid: 1) At minute 10:22. The file BlynkEdgent.h available on Gighub (see author video description) must be downloaded. Then the code of this file must be copied. After that, go to Arduino IDE: File-->Examples-->Blynk-->Blynk.Edgent-->Edgent_ESP8266. Then erase the code of the Edgent_ESP8266 (don't be worried, the file is protected and it can be only read) then, paste the code of the file BlynkEdgent.h from Gighub in the Edgent_ESP8266 file. Finally, copy and past the parameters BLYNK_TEMPLATE_ID and BLYNK_DEVICE_NAME according to your project. Then, upload the file to your NodeMCU. Open a serial monitor from IDE (tools-->serial monitor), press reset and if everything is OK you should have something similar to this: AP SSID: Blynk TEST-546K6 [6464] AP IP: 192.168.4.1 [6465] AP URL: blynk.setup [34666] WAIT_CONFIG => CONFIGURING IMPORTANT: if you try to run the file from Gighub (BlynkEdgent.h) stand alone the compilation will crash due to the lack of concordance with the paths of extra files/functions which are needed for the compilation: "BlynkEdgent.h: No such file or directory". 2) At minute 18:17. First, your mobile phone must be connected to the wifi provided by the access point router or whatsoever where you want to connect the NodeMCU. After the point 1 explained before, the NodeMCU is broadcasting a wifi with a name similar to "Blynk XXXX" . Well, if for some reason your mobile has connected to this NodeMCU wifi in some how before completing the process explain in the video, you have to go to your mobile configuration and select "forget this network". Otherwise the process of transferring the wifi password to the NodeMCU will crash. Moreover, if something wrong happens during the process of transferring the password and the wifi name by Blynk mobile app, before repeat the process you have to go to your mobile configuration check the saved networks, choose the one called "Blynk XXXX" and select "forget this network". 3) At minute 22:37 .The so called pin V0 is mapped in the NodeMCU board as pin D4. This is not trivial and is briefly commented in the video. A full mapping of the ports and their correspondence according to the Pin DataStearms on Blynk online application will be very welcome. 4) At minute 22:40. Whatever LED must be connected in series with a resistor (150ohms is fine) to limit the current through. I hope these descriptions are useful and suitable to improve this great video manual. Thanks
@Twizington2 жыл бұрын
When I go to connect my device to the app at 18:39 .It searches and finds my device and I put all my network info in and it tries to connect though it always fails. Anyone else having this issue? I can not find a solution at all. I do wonder if it has to do with the part in code that says, "uncomment your board or configure in settings" In the video he has that same bit of code that he never changed. My board settings are correct as far as I can tell. I am just lost, would appreciate any tips at all! Thank you all
@BINARYUPDATES2 жыл бұрын
Hi Trevor I believe you're not using data network on phone while NodeMCU ESP8266 get connected to Blynk App in your phone. Also code remains same as shown in video. No need to comment or uncomment anything. I hope this may help you. Good luck!
@Toyzz117 ай бұрын
Port busy error is comming sir what show I do
@manjeetpatheriya46552 жыл бұрын
Great explanation, when will you upload the tutorial for tempreture sensor with nodemcu and blynk app ?
@BINARYUPDATES2 жыл бұрын
Thank's Manjeet, I'll be posting in next 3-Weeks to read LM35 Temperature sensor data and show it on Blynk Mobile App and Dashboard
@manjeetpatheriya46552 жыл бұрын
Thank you sir, are dht11 and lm35 sensors same ?
@mustaqimhakimi26762 жыл бұрын
@@BINARYUPDATES hopefully this ASAP by this week
@prashikgajbhiye33862 жыл бұрын
my LED on and just off(like flash) after switched onn from blynk app??? don't know why?
@BINARYUPDATES2 жыл бұрын
Hi Prashik, if your arduino code and led connections are correct. Then its possible that the Blynk Server be sluggish to respond sometimes. It ultimately result in such behavior. Good day!
@user-on5vx1vb4t Жыл бұрын
🥰🥰🥰🥰
@Sami-khanYT2 ай бұрын
My device was not connecting it was showing offline even when i click that reset or rst button
@BINARYUPDATESАй бұрын
Hi Sami, please check if in your serial monitor it shows device is ready
@Sami-khanYTАй бұрын
@@BINARYUPDATES no it wasn't
@2min-drawvid6452 жыл бұрын
HI .... when I do compile. it gives me an error: BLYNKEDGENT.h : No such file or directory... can help me!
@BINARYUPDATES2 жыл бұрын
Please make sure you've install Blynk latest libraries from library manager before compiling code. If it still doesn't work then download complete project from GitHub repo of BinaryUpdates and then try with some changes in template ID and all as shown in video. I hope this may help you. It seems for me your installation may have issue especially Blynk libraries. Good luck and best wishes!
@kadirakinci7106 ай бұрын
How should I edit the code to connect 4 relays?
@BINARYUPDATES6 ай бұрын
In Blynk dashboard we then need to set 4-virtual pins to control 4-relays. These Pins will looks something like v0, v1, v2, v3 and then in Arduino code we must add and use these pins to control as show in my video for 1 virtual pin. I hope this may help. Good luck and best wishes!
@abdulraqeebkhan79002 жыл бұрын
I am having some issue in boards manager, i have no option of having a Node MCU . I have only Arduino boards and i have also install Blynk manager. please reslove my ossue
@BINARYUPDATES2 жыл бұрын
Hi Abdul, I hope you've added board manager url properly for NodeMCU ESP8266. I have made a video about how to setup NodeMCU for Arduino. You'll find it in BinaryUpdates NodeMCU playlist. Now coming back to the answer. I'll suggest reinstall arduino IDE and try adding url in "Preferences" section. And then add ESP8266 related board packages under "Board Manager" section. and i hope this time it will show you NodeMCU1.0 ESP-12E Module. Good luck and best wishes!
@abdulraqeebkhan79002 жыл бұрын
@@BINARYUPDATES Thank You Sir. But I have another issue regarding node MCU. I have simple ESP 8266 -01. If this project is applicable to the ESP 8266-01 rather than Node MCU, what changes should I made so that my project works on ESP 8266-01.
@parthsarthimanitripathi58342 жыл бұрын
I am getting error named as user_interface.h is no file or directory. I tried to solve the issue but unable to do it please help me ASAP!
@BINARYUPDATES2 жыл бұрын
Hi Parth, I hope you've copied Blynk project properly from Github link. And also, make sure you've properly installed Blynk libraries before compiling Arduino Sketch.
@VArt19982 жыл бұрын
thank u
@BINARYUPDATES2 жыл бұрын
Welcome
@abdulraqeebkhan79002 жыл бұрын
I have another issue regarding node MCU. I have simple ESP 8266 -01. If this project is applicable to the ESP 8266-01 rather than Node MCU, what changes should I made so that my project works on ESP 8266-01.
@BINARYUPDATES2 жыл бұрын
Hi Abdul, the code remains same for ESP01 for Blynk except digital pins. I'm not sure which GPIO pin is available there. But you can check with pin out and change digital pin and reuse the code. Good luck and best wishes!
@nandkumarshende8962 Жыл бұрын
Like
@robdavidowitz64282 жыл бұрын
Umesh, Can you please explain how you get this sketch to work when you don't uncomment "#define USE_NODE_MCU_BOARD" I have had a lot of issues getting the esp8266 to communicate with Blynk and through the troubleshooting and assistance from Blynk I narrowed the problem down to this 1 line of code. What is really weird, when left commented, the sketch works. When un-commented, i.e. telling Arduino which board is being used, the sketch does not work. This lets me think that you are defining the board somewhere else.
@pristonwachira3928 ай бұрын
This blynk web opens different dashboards in different countries😢
@AliMohamed-kx5kj2 жыл бұрын
Can u please tell me how I can edit the code for controlling more than 1 light ?
@BINARYUPDATES2 жыл бұрын
Hi Ali, I wish i could have time to write arduino code for you. But I will surely considr making videos to control multiple digital pins using Blynk and ESP8266. Meanwhile, you can edit existing project. Also, try adding one more virtual pin in Blynk project and arduino code for NodeMCU. I hope this may help you. Good luck!
@anju58502 жыл бұрын
bro i first connected to a wifi,,....now i want to connect to another wifi...how can i coonnect it to different wifi?
@BINARYUPDATES2 жыл бұрын
Hi, this can be done through Blynk Mobile App. And the process will remains same as you did for first time WiFi configuration. Good luck!
@euee-SathyaseelanP2 жыл бұрын
Bro but in discription there is no link for Arduino Ide setup video.
@BINARYUPDATES2 жыл бұрын
You can find complete playlist for NodeMCU ESP8266. You'll find all video in sequence. Best wishes!
@4uhacks7672 жыл бұрын
Sir how can we add voice control to this project Plz reply...❤️
@BINARYUPDATES2 жыл бұрын
In my knowledge Blynk don't have any service on their IoT platform to support Voice Service. But this can be done with NodeMCU ESP8266, if we can add additional circuit especially for audio processing. I'll consider investigating more information and if possible will make video for voice control. Thanks for you suggestions Best Wishes Umesh
@4uhacks7672 жыл бұрын
@@BINARYUPDATES thanks for reply sir plz upload video soon ❤️
@darthvader_2 жыл бұрын
I think you can use Google's voice recognition service and in the workflow you can add an HTTP request so that it hits one of Blynk's REST APIs. I did work on speech and speaker recognition back in the day and trust me the state of Blynk right now is much better. Just wanted to see how the system works now and btw nice tutorial
@4uhacks7672 жыл бұрын
@@darthvader_ I have used sinric pro and it working fine
@talasilaabhishek22312 жыл бұрын
How to reset the nodemcu esp 8266 because I have uploaded a wrong file
@BINARYUPDATES2 жыл бұрын
Hi Abhishek, if you upload wrong arduino file. Then there is a feature in Blynk called OTA Over-Air-Update through which you can upload or update firmware on NodeMCU ESP8266 from Blynk IoT Dashboard. I'll considering making video in future to show that feature. And about RESET there is an physical button on NodeMCU besides of USB connector. And I'm not sure if you can reset ESP8266 from Blynk. I hope this may help you. Wish you good luck. Thanks
@prismikavlogs2 жыл бұрын
In the same program i am facing ka problem . In BLYNK_WRITE(V0) Its is showing expected constructor, destructor. What can I do?
@BINARYUPDATES2 жыл бұрын
Hi Priyanka, please make sure you copy code correctly from BinaryUpdates GitHub Page. It seems like code issue maybe something is missing. Let me know your progress. Wish you good luck!
@sounddragon8246 Жыл бұрын
very nice video i love it
@sounddragon8246 Жыл бұрын
pls comment on my cement
@BINARYUPDATES Жыл бұрын
Hi Saunddragon, I'm glad you like this Blynk IoT tutorial with ESP8266. Best wishes!
@ahsanwasti80192 жыл бұрын
i face issue the file versions.h is not found🤔🤔
@BINARYUPDATES2 жыл бұрын
Hi Ahsan, make sure you downloaded project files properly and also installed Blynk Libraries. Good luck and best wishes!
@raghavkr274611 ай бұрын
bro I am not able to connect to wifi on arduino ide
@BINARYUPDATES11 ай бұрын
Hi Raghav, it will be good if you provide more details on what you did? and what exactly the problem you are facing with Blynk IOT Project. The more information you provide better we can help. Since, Blynk requires you to perform many steps from creating template to upload code in ESP826 and connect to Wifi. Good luck and best wishes!
@susmithak85742 жыл бұрын
Pls give me code link sir
@BINARYUPDATES2 жыл бұрын
Hi Susmitha, the code of Blynk is shared in video description. Its hosted on GitHub Page. I hope you'll find it. Good luck!
@susmithak85742 жыл бұрын
Tqq very much sir i got the code
@thinkbeyond53602 жыл бұрын
Hello sir ! Hope u are doing fine.... I have a few problems with digital pins
@thinkbeyond53602 жыл бұрын
Could u help me out?
@BINARYUPDATES2 жыл бұрын
Hi Think Beyond, I suggest using virtual pins with New Blynk as they are more versatile. But you can share more details here what are you trying to achieve and what;s exact problem you're facing and I will try my best to help you. Thanks
@maniekansal86672 жыл бұрын
Hello SIr, I am getting an error compiling to the board! Plz help
@BINARYUPDATES2 жыл бұрын
Hi Manie, make sure you've properly selected your NodeMCU1.0 (12-E Module) in boards section in Tools. Apart from that please check your code with GitHub code on BinaryUpdates account. I hope this may help you. Thanks
@ttapfx2 жыл бұрын
I beg you, teach me how to use time input for new blynk.
@BINARYUPDATES2 жыл бұрын
I will soon make more videos on Blynk to cover how to add delay using timer. I've been hearing from lot many people they need help with it. Thanks for your patience and I'll try my best to cover in upcoming videos.