How to make a home automation system using the Nodemcu ESP8266 board and the new Blynk app

[@建中趙-d8t]

Thank you for your teaching .It's very helpful.

[@kamarsjahpoh5428]

Thank you for your video i learned it and will try to make this project, your step by step video with in website is very clear.👍

[@adityavenkateshwaran1913]

You have created a fantastic video. My question to you is that, is it safe to connect 5V DC to NodeMCU, because as far as I know, NodeMCU works on 3.3V Power supply. Do correct me if I am wrong🙂

[@thinethramanayakaSFT]

Thank you sir it's work well. This helps me a lot. thank you very much.

[@vaibhavikudaskar5840]

Hey did you implement this succesfully

[@Vinay._.7]

i decided to set this circuit at main power board for fan and tubelight is there any issue while using manual switches alternatively, please needed reply.

[@barskuyas7881]

I haven't used the blynk app for a long time and the new version is very confusing. Thanks to your video, I was able to do my project easily. I also like other content on your channel, i subscribed. Thanks for everything my friend and good luck 🙂

[@sritu_hobby]

Your welcome

[@aahnacer1897]

Very good. What about manual control with WIFI?. Thanks

[@maddd5503]

what power supply that you connected to the nodeMCU and where can I buy it

[@muhammadnor4135]

Thank you sir, I really like this, how to add program code to control 4 relays, and please make a push button to control it manually.

[@rutujadeshmukh25]

So we can operate through blynk app even far from the devices

[@Arnay111]

Will it work 😮

[@GlendaMoses]

Plzzz share app linkk which you have used

[@arunpatil3044]

can we use one 12v fan instead of 2nd bulb

[@sritu_hobby]

Yes

[@KingPokeLahh]

Link Arduino ide setup?

[@fayazkhanmahar8179]

sir In this project when I turn on the first relay at same time esp8266's Led is also turn on and press again both are off. WHY?

[@realistic_playz9621]

Hello Sir.. First-of-all Thanks for this marvelous video.. but i didn't understand a thing. That is at 11:03 where did you connect them ? Please help by saying sir.

[@sritu_hobby]

5VDC external power supply

[@yingaua69]

@@sritu_hobby can it work without it?

[@m.naveenkumarm.naveenkumar7983]

What purpose for used the 2 clips

[@MRREDDY-ih7wb]

tqqqqq verymuch

[@hanfan2603]

can we use LED strips instead

[@sritu_hobby]

Yes

[@mohammedswalih7547]

Is it possible to power esp using relay by connecting to AC current

[@ardlabrada6596]

Can i use it on wall fan?

[@sritu_hobby]

Yah

[@SNYGAMING-42]

Error in the code at 39 line

[@ece-akola.venkatasaisatees2159]

Bro! How u rectified that error in the 39th line?

[@MannJainnnn]

+1

[@gyorgypuskas7555]

Thank you!Work with 2 relays!Please source code, how work all pin!

[@sritu_hobby]

srituhobby.com

[@synchronousmotor749]

no such file in directory is showing up as i compile the code...whats wrong

[@sritu_hobby]

srituhobby.com

[@muhaiminrafid3830]

Same bro, have you found a solution?

[@abhisheksunil.7483]

Bro the hotspot is not connecting to the esp8266 it's saying leaving hard resetting via rts pin

[@damartek]

I'm using four lamps, is that possible?

[@sritu_hobby]

Please use a four channel relay module

[@damartek]

@@sritu_hobby is it possible with the code above

[@sulaimanbaigmirza1679]

How to create on blynk website for 1 bulb with single channel relay?

[@sritu_hobby]

Check our channel

[@lakshithasamaranayake7519]

how to connect 4 chanal relay module in program

[@KillMongerD]

No matter what channel it is bro just change the in ports.. In 4 channel relay you will be having 4 in ports Connect in in1 and in2 😁

[@Lazydude22]

The output of nodemcu is only 3.3 then how the relay got power?

[@jasonbourne8283]

When i'm switching one of the buttons 'ON' both lights turn on. When both buttons are 'ON' or 'OFF' then neither one of the lights are ON. Can you help me

[@mohammedabdulghani7545]

Hello sir… I have uploaded the same program on D1 MINI, Blynk is also showing online but it is not getting on/off through Blynk. What can be the problem ?

[@sritu_hobby]

Please check your hardware parts

[@Rajeshhhhhhh]

Sir...usb cable is removed ? How dc power supply given to node mcu? Why didn't u show how code is dumped ? ...please reply sir...I need very now

[@sritu_hobby]

You can use 12v or 9v power supply

[@subodhsinghjamwal7652]

Bro we had to enter the Wi-Fi name and password of our mobile or of brodband

[@rebelle4]

bro & arduino IDE in tool section Board, there is no option of selecting ESP8266 Board (3.0.11) Please help

[@boltariyo7352]

I have done all the necessay setup with the blynk app configuration with my wife details in the ide code, my nodemcu is connecting to my hotspot but the blynk keep showing offline, please i need help with it

[@fayazkhanmahar8179]

Then check your blynk ID, template name and Auth Token

[@SV_49Edit]

Sir How to do it manually with switch ??

[@sritu_hobby]

Don't need development boards for that.

[@adamrahmawan567]

Sir what a type relay low trigger or high trigger ?plis answer

[@fayazkhanmahar8179]

The low trigger is when you power on the relay it will automatically turn off the, and high trigger is when you power the relay it will automatically turn on

[@t_sdrawings4215]

Code showing error to specify template id and name

[@tarunsaikorlepara8067]

How can we interact with you sir please 🙏

[@theawaissheikh8036]

Which jumper wire is used

[@sritu_hobby]

Male to Female

[@theawaissheikh8036]

@@sritu_hobby thank you bhai

[@stechbds]

Same need Manual Switch with Blynk APP 2.0

[@hooka_king1781]

Blynk app wifi not connect without internet

[@ShuvAyerdon]

How to do it manually?

[@sritu_hobby]

Check our channel

[@mofar7960]

Aircond project Nodemcu control please ?

[@sritu_hobby]

Ok sure

[@UdayKiran-zl7os]

Bro it not showing online 😔

[@AGshorts2006]

After doing all good lights where on whithout any instructions on app didn't even turn then ON from app

[@AGshorts2006]

Tell br

[@AGshorts2006]

Bro tell the solution

[@adamrahmawan567]

why doesn't my relay work when everything is connected? does my relay not have enough power supply?

[@sritu_hobby]

Check your relay jumper wires

[@sakshikumari7322]

I need help sir

[@fideledagne6274]

Bonjour chef , excellente vidéo encore. Stp relativement à cette nouvelle application Blynk IOT, je voudrais savoir s'il n'y a pas moyen de cracker ou de l'avoir gratuitement. Étant donné je suis étudiant actuellement. Je n'ai pas grand moyens pour l'acheter

[@sritu_hobby]

English???

[@fideledagne6274]

@@sritu_hobby Hello chef, great video again. Please, relative to this new Blynk IOT application, I would like to know if there is no way to crack it or to have it for free. Since I am currently a student. I don't have great means to buy it

[@احمدثائراحسانمهدي]

Thanks for your video How can i add time input to the system

[@sritu_hobby]

You can use a RTC module

[@احمدثائراحسانمهدي]

But i used timer in the old blynk app without using RTC module but now in the new blynk app i add timer to datastream but its dont work

[@احمدثائراحسانمهدي]

@@sritu_hobby sir can you add time input to the same Project and share it i will thankful of you

[@sritu_hobby]

Ok sure

[@احمدثائراحسانمهدي]

@@sritu_hobby when

[@Tengsusangma869]

Can you please help me i have problem when compiling the code .

[@sritu_hobby]

What is your issue?

[@Tengsusangma869]

@@sritu_hobby im Copying your project So im stuck while compiling the program the word "ESP8266wifi_h" is showing error so how can i install this word though library manager?

[@Tengsusangma869]

So I choosen this video as my group project to our college.

[@sritu_hobby]

Please include the WIFI library. Library link in the my website srituhobby.com

[@Tengsusangma869]

@@sritu_hobby Okay i'll try.

[@sriramadari]

Facing port issue could u please help

[@sritu_hobby]

Please include the COM port drivers

[@kumar7609]

Sir I'm unable to upload code to node MCU will you please help its showing "upload error:failed uploading:return status1"

[@AhmadFarzadTaquee]

probably there is a problem with the board manager, delete and reinstall nodemcu. It can also be a library problem.

[@SaiMouli-wk6vm]

Hello sir , what if the wifi password for what, where can i get it ...I not clearly understand.

[@sritu_hobby]

WiFI rauter password

[@Jnelectrotech]

Sir ike error D0 not declare

[@atharvchopra9188]

On Board, there is no option of selecting ESP8266 Board (3.0.11) Please help

[@bilege.bek1103]

Hi did you know the answer?

[@broslazer6968]

Why cant go to your website

[@sritu_hobby]

I fixed it.

[@Alex_koshy]

Sir please help me after uploading the code when i turn on its saying "Device is offline"

[@sritu_hobby]

please check you Blynk auth token

[@prajitkumar1745]

@Alex Koshy @SriTu Hobby Hello Alex..I am having the same error..did you figure it out later? If yeah, please help me out I am stuck. 😔

[@sakshikumari7322]

mera project bn chuka hai magar work nhi kr rha plug lganae pe ek bulb khud jal jata hai aur blynk app pe offline hi show kr rha hai mer project date 31 hai plese help me

[@sakshikumari7322]

I need help sir

[@kshitijatambekar1740]

wifi SSID mean my hotspot name?

[@sritu_hobby]

WIFI connection name

[@mihirsharma5625]

dude we can't acceess the source and the circuit diagram

[@eptyekerrasul2672]

Wher is the link

[@sritu_hobby]

srituhobby.com

[@adiprai2887]

Thanks for the written as well as the video tutorials. However, I got confused on WiFi parameters; name and password. Do I have to plugin my phone's WiFi name and password?

[@sritu_hobby]

Please include your internet connection details

[@adiprai2887]

@@sritu_hobby Sorry for again putting up a question. Actually I am replicating your project to show to my student. I am a teacher, by the way. My students are diehards of robotics. Apology for my query. I should admit that I am a newbie in the field of robotic/AI. I would be grateful if you could enlighten me about it. I am stuck at the programming of the NodeMCU module. I did the coding and plugged in the 'blynk auth token', but I was unable to put WiFi name and password.

[@rishis907]

@@adiprai2887 wiffi name you can use your wifi name and password. For ex. Start hotspot in mobile A And try to connect mobile B -> goto setting and search for hotspot name n password what is displaying in mobile A. Same name n password you can use in ESP8266 code

[@hamzawali6369]

Sir

[@muhamadaryapasyah3500]

where can i get the code of programming?

[@sritu_hobby]

srituhobby.com

[@abhay9241]

hey i need help i m not able to get the source code

[@sritu_hobby]

srituhobby.com

[@rebelle4]

0:46 bro my esp isn't going in !! what should i do now?

[@sritu_hobby]

what's the issue?

[@rebelle4]

@@sritu_hobby the holes of breadboard is too small ! esp esp isn't going in breadboard holes

[@sritu_hobby]

You can use two breadboards

[@naeimimohammad]

please send code link for me.

[@sritu_hobby]

srituhobby.com

[@dungho2381]

use esp32

[@sritu_hobby]

Yes, but your must some changes

[@op-mj7gq]

Not working any one help me

[@yogeshhs7422]

sir the relay is acting properly but the bulb isn't getting turned on what's the problem can u plz help me rectifying it

[@sritu_hobby]

Please check the circuit diagram.

[@yashveerjain9488]

code is not working show fatal error bro.......

[@sritu_hobby]

Check it again.

[@yashveerjain9488]

@@sritu_hobby fatal error time out bta rha hai compiler

[@saikatd9037]

Ali express not working in India

[@sritu_hobby]

You can use banggood

[@rahulchourey1986]

Code link please

[@sritu_hobby]

srituhobby.com

[@SHIVKUMAR-jv2zu]

My blynk app didn't find the node mcu's wifi what i do ?

[@sritu_hobby]

Please check your WIFI details

[@sakshikumari7322]

Please read my previous comment and respond