BMW 320d 2005 FRM short circuit count reset with Toolset32. Reverse lights not working.

[@MrThomasMagnumPI]

Thank you. You saved me. I see now this video is 8 years old. I did the counter reset with bimmer tool / service functions. Everything is in English so no problem. Did this with china elm32/bimmer tool, but you headed me towards logical conclusion. Thumbs up!

[@LMAutoRepairs]

😊 👍👍👍

[@elimareyev4978]

Your video was super helpful! I spent probably 6 hours over 3 days searching the web for help fixing my BMW tail light. Thank you so much! It wasn't immediately clear to me that you use Toolset 32 for this (which is what I was looking for). I think more people will find this if you mention that in the title. Thanks a million!

[@LMAutoRepairs]

Eli Mareyev Hi Thank you for watching and for your comment! Glad I could help, I think you are probably right... I will update the title...

[@aziikova.3619]

Hi, im new to bmw E90. Reverse light warning shows up and none of the reverse lights was working. Download all the software and followed your tutorials step by step/word by word and now I feel epic!! Error free and reverse lights are shining bright! Thank you.

[@LMAutoRepairs]

That's great! Thank you for watching and for your feedback!

[@azb786]

@@LMAutoRepairs Hi buddy.. I'm back again. This time my whole left/right reverse, rear fog lights not working. Do you think it the FRM playing or need to inspect further.

[@LMAutoRepairs]

@@azb786 I would inspect further... scan the car and try to actuate the lights...

[@yessirtq3312]

I've issues with my E90 2010 brake lower left light, will try to check bulb and reset code accordingly. If the FTM give me problem, at least now I know what to try. Man you've incredible knowledge, and has help lots of people.

[@LMAutoRepairs]

Thank you for watching and for your comment!

[@yessirtq3312]

@@LMAutoRepairs E90 323i 2011 MY (Asia Model) Carly fault codes : 00A8C3 : Break-force display, left...2.Bremslicht left defective, E84: Defective bottom left Idrive messages : Brake light failure, bottom left Dashboard errors : "Light Bulb" error indicator (same as per your youtube) Problem/Incident : 20/10/2019 "Light Bulb" error indicator came "ON" while driving, STOP check seems to be all brake lights working fine. Check with Carly show above error, however brake light working OK. Try reset with Carly, no success to clear 00A8C3. Continue driving as normal daily, maybe 1000km + with idrive showing brake light left error all along. Fixes : 25/12/2019 Purchase/Replaced all with 4 new brake light bulbs OSRAM 7506 12VP/21W. After replacement, able to reset, no ore 00A8C3 errors, drive around for the day, no more errors, consider 100% fixed. (No FTM issues, although has been driving for > 1 month with the brake light error). Analysis : 25/12/2019 Old 4ea x OSRAM 7506 12VP/21W 3 ea (all OK) 1 ea (physically filament look OK, but No conductivity on terminal) Just like to share my 2010 E90 experience, which has now clocked approx 160,000km. Keep sharing. BMW from Borneo Forest (with Autobahn equivalent highway). Owned E36M, E39 and E90, still thinking about going 4-cyl craps, or maybe not for a while)

[@LMAutoRepairs]

@@yessirtq3312 Yes... some bulbs just don't have the resistance the module is expecting... causing the fault... Thank you for watching and for sharing your experience. 👍

[@BMWtipguy]

Absolutely awesome video! Precisely explained and showed every single thing that is needed to reset the short circuit succesfully. Huge thanks, I fixed my e91 headlight problem with the help of this video.

[@LMAutoRepairs]

That's great! Thank you for watching and for your comment! 👍👍👍

[@efan1980]

Wonderful step-by-step how-to video! I was able to clear my E90 FRM_87 parking light counter successfully by following this. Thank you for posting it!

[@LMAutoRepairs]

😊 👍👍👍

[@obbyvk1158]

Wow! You helped me out BIG time. I reset the counter thanks to you. Very good video. I did a E90 lci xenon headlight swap to a non lci E90. Connected the interior lights to the angel eyes to get the welcome home lights on my FRM1. The canbus leds were using too much power which triggered the shortcircuit counter. Now I removed the resistors from the leds. Thank you very much from Netherlands!

[@LMAutoRepairs]

Obby V K Hi Thank you for the feedback and for watching!

[@hiphopaap]

Obby V K waar heb je die kabel kunnen kopen om de bmw te connecten aan een laptop?

[@MK-mc7pq]

Thank you, thank you, thank you! I’ve been living with this error light on my dash for 6 years. Thanks to you I was able to clear it!

[@LMAutoRepairs]

That's great! Thank you for watching and for your comment! 👍👍👍

[@nbtbrv859]

Thank you so much for posting this in great step by step detail. I had exactly the same problem and I hadn't used Toolset32 or INPA before. So I bought a cable and followed your instructions step by step and it has resolved my issue too. The only thing I couldn't get Tool32 to show was the "Tabellen-Info" window, but as I had the same problem I just copied everything else. Thanks so much again for going to all the trouble to detail it out!

[@LMAutoRepairs]

NBTBRV8 Hi No problem... glad to know I could help. Thank you for watching!

[@chriscooper2342]

Thanks so much! Followed this video to get my reversing lights working and it did just that. Would have been almost impossible to do without this how to do. Really appreciate you taking the time to upload it.

[@LMAutoRepairs]

Thanks! Great you managed to get it done! 👍👍👍

[@Svaba787]

Hvala vam puno na ovakav dobar i detaljno opisan video..meni je pomoglo , imao sam problem sa zadnjim rückwertz svetlom , kupio kabel i pratio sta radite..i problem sam resio..THX

[@LMAutoRepairs]

To je sjajno! Hvala vam što ste gledali i komentarisali!

[@IIDUCI]

Thank you, I fixed all the lights issues including the angel lights that never worked since i got the my car! Appreciated

[@LMAutoRepairs]

That's great! 👍👍👍

[@Drda25]

OMG you help me finally after 4 years my reverse light works :D

[@LMAutoRepairs]

☺ 👍👍👍

[@kennyb1155]

Wow just wow how you discover all this information and remember it is mind blowing 👌🏻

[@LMAutoRepairs]

Kenny B Lol Don't take me wrong, sometimes when I don't do a certain procedure for a long time, I scratch a bit until get it up to speed again... but when you know is there, is only a matter of patience and time... Thank you for watching! 👍

[@fredanderson8295]

@@LMAutoRepairs Thank you so much for this, i took my car to a shop and they couldn't even figure out it. thank you!!!!

[@LMAutoRepairs]

@@fredanderson8295 😉 Thank you for watching and for your comment!

[@fredanderson8295]

@@LMAutoRepairs I reset 3 different light counters (fog lights, reverse lights etc) however the rear left fog light (Europe only) now works correctly but the error still remains on the dash, even after trying to clear codes with inpa and cycling the key. I only have JBBF module error A6E3... This is correct since the hatch release or trunk button no longer works. Don't know how to fix that

[@LMAutoRepairs]

@@fredanderson8295 If the light is actually working, check bulb and connections... bulb contact points... poor contact might allow the light to work, but will not allow the module to test correctly... alternatively, you can disable the bulb check...😉

[@MrAsadEp]

As said already, I too really appreciate the advice/tips you give in your videos...even if you have the software, you cant carry out procedures like this if you dont know they exist...thank you.

[@LMAutoRepairs]

Thanks!

[@MrAsadEp]

+lmsvvavr I spied the power probe wire tracer in the boot, is it worth it? or is a simple tone generator good enough?

[@LMAutoRepairs]

+MrAsadEp It is a recent purchase, haven't used it that many times... But, it is good depending on the problem you are trying to find... I haven't used yet to find shorts or open circuits... but have used to trace a wire.... that was very handy, as helped me finding where was going without taking any panels inside the car... handy when you don't have wiring diagrams... Bottom of line, I wouldn't pay the full selling price, I think is a bit expensive. I got second hand, and for half of the price of a new one... I might do a video for it if the opportunity arises... Hope that helps...

[@gunti80]

Nice videos. can you do a video on programming used bmw cas module?

[@daci88]

You're a star, saved me from buying a new frm module, take care

[@LMAutoRepairs]

☺️ 👍👍👍

[@blckent2k6]

Excellent video, I was going to replace my FRM Module until I saw this video. Thanks for the heads up.

[@LMAutoRepairs]

Andrew Goring Thank you for watching and for your feedback! Hope you get it sorted...

[@bapsmcginty4782]

Top man. Taking the smoke and mirrors out of why this stuff happens. I'm in.👍

[@LMAutoRepairs]

If you have short on the wiring, the module detects it... and after 50 cycles if the short has not been repaired, the FRM disables that circuit... that's it... Thank you for watching and for your comment!

[@ArchyChen1]

Thanks a million, this sorted my indicator problem. My was run frm_70 file, shorted circuits only count to 14. Cheers

[@LMAutoRepairs]

Glad you got it sorted! Thank you for watching and for your comment! 👍

[@frank152mm]

Where I can find those codes translations from German to English. Thanks 👍☺️

[@stuzman52]

Great video! I can understand that the module will shut down it's output to protect itself. But why would the engineers decide to go through all of this to enable it again. Why not just have it to clear the code to enable it again? Just amazing how engineers can complicate a procedure...

[@LMAutoRepairs]

Thanks!

[@cristovaonunes4952]

Hello I have a 2005 e90 that won’t communicate over OBD port with diagnostic tool and passenger Windows won’t go down but I can hear the relays clicking!! And ideia abou what’s the problem? Thank

[@LMAutoRepairs]

Check fuses, power and grounds... You need to sort the communication issue first I would say... Thank you for watching!

[@PedigreeMongrel]

👍 Great video you saved me alot of headache translating that lot. I finally have reverse lights again and heads up to anyone buying k+dcan leads to do this beware of software that come with them mine had a bit coin mining trojan preloaded. I used mikes easy bmw tools in the end only needed to download com port driver for the lead

[@LMAutoRepairs]

👍👍👍

[@sadikmamoun2847]

i would like to thank you for all your videos and encourage you to do more like this one and thats the kind of video you should do i would never tought about solving this fault like you did i appreciate all the informations and the method you are working with and how you share with us thanks a lot

[@LMAutoRepairs]

Thanks!

[@swalko]

Great video! My reverse lights finally works again.

[@LMAutoRepairs]

☺️ 👍👍👍

[@markusauer6497]

Thanks for showing the details to work on Tool 32. Great Video!

[@LMAutoRepairs]

No worries... Thank you for watching and for your comment! 👍👍👍

[@NoNoX1733]

Your D-CAN is red or Green of to codage ?

[@kathijakhan2548]

Bro please tel me what colour pcboard does your inpa cable have wite or green?

[@LMAutoRepairs]

I believe is the white one... Haven't used it for some time... Thank you for watching and for your comment!

[@MrGoodcat1]

Can you help me how to do electronic turbo actuator test on BMW 330D by tool32?

[@jamespowell6411]

I have frm front fog light button error on auto com but the rears dont turn on. Is ther any way to check this with tool32 i have replaced the light switch?

[@fransho9510]

I am so thankful i found your instruction video, its easy to follow and shown me all the steps i need. I had to reset the same reverse light as yours and solved it. There was a struggle to install the INPA properly on my laptop but its all done. Thank you please keep up the great work

[@LMAutoRepairs]

That's great! Nice to know it was helpful! Thank you for watching and for your comment!

[@djprojectdoom]

hey there great instructions. Would like to ask a question. I have a e92 330i 2008 with auto transmission. My reverse lights are off and PDC comes on almost flickering on the idrive and goes away. Ive read that manual trans have that switch which feeds in FRM but have read conflicting review on how the auto trans transmits the R signal. All FRM related items work and all trans related items work so im guessing theres a loose wire of loose ground? Any advice?

[@LMAutoRepairs]

Hi I might be wrong... so don't quote me on this... as i haven't checked... but I would say on an Auto, that information is transmitted via CAN network from the transmission control unit. Check live data, and see exactly what is going on... That would be my first step... Thank you for watching and for your comment!

[@MrDeivisD]

This video is awesome!!! Fantastic!!!Save me a lot money and time. Was waiting 3 years . !!! A lot thanks!!!

[@LMAutoRepairs]

D. Palacionis Comments like your are the ones that make me think that what I am doing does have a purpose... Thank you so much for watching and for your comment!

[@MrDeivisD]

LM Auto Repairs , now looking more info for, reset and fix DSC AND DBC. And how to reset service micro filter, engine oil,brake fluid. If you have a video please to share, [e-mail]

[@LMAutoRepairs]

D. Palacionis Watch this video and consider to support... kzbin.info/www/bejne/oZKQiqWcociXY9E Thank you...

[@martindimmen4767]

Hello, I Have an E87 and only Get an error when i try to reset: ERROR ECU SUBFUNCTION NOT SUPPORTED INVALID FORMAT. I found that the counter has gone to 164, when i check the light.

[@LMAutoRepairs]

Hi Make sure you have selected the correct database for your car... Thank you for watching and for your comment!

[@kathijakhan2548]

Hi please can you tel me why my bmw e90 2011 one front left side dimmed beam and back side right light stil not working after frm repaired.thanks

[@LMAutoRepairs]

How can I know such thing? I am not a wizard... Scan the car, or ask to whoever repaired the FRM... Thank you for watching and for your comment!

[@johngadd1375]

Can you do a remote connection to clear error count on e E90 318i 2007 model?

[@freakoid9000]

Great step by step video. Thank you!

[@LMAutoRepairs]

😊 👍👍👍

[@dlt_mate]

Hi! I'm having a similar problem with my F30 (2012). My right-hand side wing mirror indicator isn't working, as the short circuit has triggered too many times and has shut off the module. I've tried to find details on how to reset the counter for an F30 but haven't been able to find one. Is this something you've seen before?

[@LMAutoRepairs]

Never did it on a F series... sorry... But surely there is a way...😊 Thank you for watching!

[@danjoban]

Thank you my new best friend, you are a genius!

[@LMAutoRepairs]

😊 Thanks!

[@brendahaigh5100]

Hi. Can you please advise just what I have to buy to carry out this repair (I am not sure about C Cables though)? Many thanks.

[@LMAutoRepairs]

D-Can cable... is what is called... You can buy a cable supplied with all the software... just google it...😉 👍👍👍

[@brendahaigh5100]

@@LMAutoRepairs Hi. Which software am I looking for? Please advise which one. Also do I need Toolset32? Thanks, Steven.

[@LMAutoRepairs]

Have you watched the video? I have explained everything in there... If you need Toolset32, the answer is in the title...

[@nkhan7804]

Hi what type autel are you useing and where can i get a good one like yours from?

[@LMAutoRepairs]

Hi MaxiSys MS908P. Visit Autel website, or eBay...😉 Thank you for watching and for your comment!

[@nkhan7804]

Very good video bro now you make a video how to write vin on replacement frm module if we need to replace frm thanks☺👋

[@LMAutoRepairs]

@@nkhan7804 When I have one to do... not a problem!

[@orhun2062]

First of all thank you for the upload, very helpful and educational video, i had a similar problem with dipped beam short circular, had done every thing accordingly, all lights are working fine now but still dipped beam sign appearing on the dash, whats gone wrong, what do i need to do??

[@LMAutoRepairs]

orhun20 Hi Thank you for watching and for your comment! So, you have reset the short circuit, and the dipped beams are now working again...however on the dash you are getting the warning for faulty dipped beams... it is that correct? If so, check that the lights cold or hot check has not been disabled... If enabled, check that the bulb contacts are clean... Hope that helps....

[@rubii90]

Fantastic video! I had exactly the same problem on my car, this helped me alot, thank you!

[@LMAutoRepairs]

Was a pleasure to be able to help! Thank you for watching!

[@MrXacho]

Hello, I have to repair my car as you show it on the video thank you so much

[@nabilishes]

When you use Toolset32 or WinFKP, do you on/start your engine completely or do u just put a battery charger at the front hood terminals ?

[@LMAutoRepairs]

nabilishes Hi For Toolset32 engine running is OK... for Winfkp (programming) battery charger... well, depends on which ecu you are working on... but I would advise you to use the charger... Hope that helps

[@LMAutoRepairs]

nabilishes Hi For Toolset32 engine running is OK... for Winfkp (programming) battery charger... well, depends on which ecu you are working on... but I would advise you to use the charger... Hope that helps

[@nabilishes]

What about when using INPA or C310 reading module to read and clear errors? I'm scared to bricked the FRM module as this has happen before.

[@fernandobullon430]

Can i do the samething for the windows i have the anti trap fault for both off my front windows on my 09 x5 4.8l and i did the reset with the scan tool and the manual reset.... windows will only go up or down an inch at a time. I hope you can help me. Thanks in advance

[@derekkchung]

What if there is not code for short circuit fault? It could still need counter reset? Autel scanner can't do counter reset? What other (cheapest) tool can do? The german really scares me. What if u do a coding (programming / flashing) with autel, does it also do the counter reset (for all light bulb counters)?

[@LMAutoRepairs]

Not sure Autel, but I think it can... never had to use it for this procedure... 👍👍👍

[@mrEquid]

Very helpfull step by step tutorial, thank you!

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@tobiornot8911]

Great, Great, Great, your re a hero!!! :-) Having exactly same problem on my E90 330D, thank you sooooo much for your video and the single steps u showed! Im sure i would pay 1.000 Euro + for broken cable in trunk and receiving new footleg module :-( Living in Germany, near Munich, so its easier for me with the german words, but u re doing good with "links" and "rechts" :-) Thanks again!!!

[@LMAutoRepairs]

Lol... Thank you for your nice comment! Is nice to know that my videos are helping people out there...

[@kalex-bi4nf]

WORK PERFECT I did for brake light Right and for both running light. THANKS.

[@LMAutoRepairs]

That's great! Thank you for watching and for your comment!

[@clementenoguera772]

Hi nice job doing that video question can you do the same on a 2013 something happen to me when I changed led headlights on my car can you Please tell me what program you are using

[@LMAutoRepairs]

Hi I clearly say the name of all the softwares I used... if you watch the video you will be able to see... Now, if your car is a 2013 model, is going to be the F chassis, and not sure if this will do the job, as you might need to get esys... I never researched that... Hope that helps... Thank you for watching and for your comment!

[@clementenoguera772]

Thank you for your prompt response keep it up

[@AlexAlex-qf6du]

Hi...so i have a e90 2007 without idrive i use Carly for coding it s ok i have error on PDC bit whn i put in reverse it shows the error so the gear shift sensor works . Also my reverse lights does not work and on scan...i have FRM module severe error short circuit bla bla bla and not only , the back lights does not work also on the trunk part of the car where the reverse lights are. Again Carly sais short circuit error so..it this a safe way to try to repair it? Please advice thx

[@LMAutoRepairs]

Check the loom on the boot lid hinge... As per this video... 👍👍👍

[@LONERANGER1970]

Where did you get the English print out of the lamp id?

[@LMAutoRepairs]

Can't remember now.... I have it on my server... don't know how long or where I got it from... Sorry... but a Google search most likely will help you! Thank you for watching!

[@steventangeras4001]

0x00 High Beam, Left or E92/3 Cornering Light 0x01 High Beam, Right or E92/3 Cornering Light 0x02 Low Beam, Left 0x03 Low Beam, Right 0x04 Parking Light, Left 0x05 Parking Light, Right 0x06 Fog Light, Left, Front 0x07 Fog Light, Right, Front 0x08 Turn Signal, Left, Front 0x09 Turn Signal, Right, Front 0x0A Turn Signal, Left, Rear 0x0B Turn Signal, Right, Rear 0x0C Unassigned 1 0x0D Lighting WBL Button? 0x0E Brake Light, Left 0x0F Brake Light, Right 0x10 Brake Light, Center 0x11 Taillight/Brake Light, Left 1 or E92/3 Daytime Running Light 0x12 Taillight/Brake Light, Right 1 or E92/3 Daytime Running Light 0x13 Taillight/Brake Light, Left 2 0x14 Taillight/Brake Light, Right 2 0x15 Licence Plate Lighting 0x16 Interior Lighting 0x17 Fog Light, Left, Rear 0x18 Fog Light, Right, Rear 0x19 Reverse Light, Left 0x1A Reverse Light, Right 0x1B Brake Force Display, Left 0x1C Brake Force Display, Right 0x1D Clamp 58g 0x1E LED Driving Lights Control 0x1F LED Front Field Illumination 0xFF Unknown Lamp

[@keitho77]

What does the PDC connect to in the circuit? Have a 2008 e90 320D with a battery drain issue. Discovered disconnecting the PDC stops drain. Replaced the PDC but drain issue is the same. Trying to determine what's on the PDC circuit to find what module/systems are staying awake on the car causing the drain. BTW, battery drain issue began after car was in with main dealer BMW for recall work. Thanks Luis.

[@LMAutoRepairs]

Hi I would say to the sensors and can... but without checking diagrams is difficult to say... Disconnect the sensors and see if the drain starts again... and go from there... Alternatively kzbin.info/www/bejne/a3vPkKOle5holaM Myself or a fellow member, will be more than happy to help! Thank you for watching!

[@m_riyaz_h3279]

Thanks a million. Super video. Solved my problem. I am so happy. Thank you 🙏

[@LMAutoRepairs]

That's great! Thank you for watching and for your comment! 👍👍👍

[@alexbotez2749]

I was expecting an easier repair for this one as nowadays some diagnostic tools have the funtion to reset the short. My launch x431 does it very easily in the special function menu. I am not sure if launch had the funtion 4 years ago but I know for sure i used over 2 years ago.

[@LMAutoRepairs]

Yes, some newer tools can do it... Thank you for watching and for your comment!

[@iulian3701]

I have a similar problem but on the face I did not light up a bmw f31 you think you can help

[@LMAutoRepairs]

Hi F chassis are done using a different interface and software... Never done it on a F series, but presume it is possible... providing this is the problem you have... Thank you for watching!

[@iulian3701]

LM Auto hi Do you thing you can help me with my problem reset FEM MODULE to a bmw f31 2013 this is the error 8041A5: ONE OR MORE OUTPUTS HAVE EXCEEDED THE NUMBER OF PERMISSIBLE SHORT CIRCUIT CYCLES (CODABLE) Now the beam light does not work thank you very much

[@killsixz9047]

Thanks, did mine and have reverse lights again!!

[@LMAutoRepairs]

That's great! Thank you for watching!

[@MrClemente71]

I have an f30 and have the same problem with the headlights I’m in sfo California is there any shop that can do this that you can recommend?

[@LMAutoRepairs]

Not a clue... I am in the UK... Thank you for watching!

[@abundantlife2027]

Hello, good video. My car broke down due to chain guides issues, and took it to a nearby garage. They managed to fix it, but when I went to get it I realized all the lights are not working right now. Where should I start?

[@LMAutoRepairs]

Star with the basics... check fuses, connections etc... then scan the car and go from there... Thank you for watching!

[@jamieholden8187]

FANTASTIC, you are legend mate!

[@LMAutoRepairs]

😊 Thanks! For watching and for your comment!

[@jamieholden8187]

@@LMAutoRepairs Now I just have to get hold of Toolset 32 - I have a MacBook Pro...

[@jamieholden8187]

@@LMAutoRepairs To be honest, I feel as though you have just given me a valuable gift of your knowledge - I really appreciate it!

[@LMAutoRepairs]

@@jamieholden8187 😊 👍

[@davispaul82]

I need your help when it comes to the DRL. My left one is bad and has reached its limit of 50 but when I try to do the reset, it gives me an error for status instead of okey

[@LMAutoRepairs]

Have you already fixed/repaired the problem? Thank you for watching!

[@davispaul82]

No I haven't. I noticed you did all of this with the car running also.

[@LMAutoRepairs]

@@davispaul82 So, how do you want to reset the counter if you probably still have the fault present? As you have seen, I first repaired the issue, then carried out the procedure... Don't jump ahead of things... Find the fault, repair it, then reset the counter...

[@davispaul82]

@@LMAutoRepairs so I did get it figured out this morning. The 0xXX I had was correct but I had to use one of the two reset options available. Before I was using the incorrect one. But thanks again for the video which was very helpful.

[@LMAutoRepairs]

@@davispaul82 That's great! Just make sure you now rectify the problem... 👍👍👍

[@jeffampo7697]

I really need to speak to you sir. I have the exact problem with my BMW Z4 and no body seem to be able to help apart from the dealer asking me to buy a new module. Please will like to liaise with you to see if you can help. I’ve watched your video to the end and the problems are identical

[@LMAutoRepairs]

Do you have the D-Can cable and the software installed? Have you rectified the short circuit? Which lights are not working? Thank you for watching!

[@jeffampo7697]

No sir, I can order the cable. I’ve only seen you video today Ive been going back and forth with this problem for a while now. I bought a whole light from eBay and returned it because that wasn’t the problem and now my MOT is due end of the month. What is the name of the software ?? It the passenger side reverse light. I e run a diagnostic and it say short circuit issue. I filled everything you did because I have a similar diag tool

[@LMAutoRepairs]

Hi The software comes with it... you just might need to get hold of the PSdZ data for your car... rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FBMW-USB-OBD-K-DCAN-DIAGNOSTIC-CABLE-GT1-EDIABAS-INPA-DIS-SSS-NCS-EXPERT-CODING%2F163390360653%3Fepid%3D17027212037%26hash%3Ditem260ad30c4d%3Ag%3A7JQAAOSwcaFZIMoC&campid=5338344466&toolid=20008

[@jeffampo7697]

- Inpa 5.0.6 (with English script files) - EDIABAS 7.3.0 - NCS Expert 4.0.1 (with English menus and buttons, and NCS Dummy Profile) - NCS Dummy 0.6.0.4 - Tool32 4.0.3 - WinKFP 5.3.1 - BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files) - Integrated SP-DATEN v53.3 Is this correct software sir?

[@LMAutoRepairs]

Yes...

[@seazwar]

Hi @LMAutoRepairs and thanks for this video. I'm unsure on what I'm about to ask and I noticed that some of the comments already addressed this, but I felt it was not the answer I was looking for. So here it goes: Does the Locked FRM behaviour also makes the buzz alarm trigger every 20 seconds? (in my personal case it was the window elevator cable that got stuck and not the anti-trap sign won't go off, beeping every 20 seconds and driving me crazy. I have read in a lot of places that once the FRM (before 2009) reaches the 60 "hits" limit, it blocks and it is not possible to do anything with it, unless you can somehow "hardcode" it again, like you install the "firmware" from scratch. I had to buy one for my 120d due to xenon lights, and then I have already paid once to have the FRM on mt 2006 320d "hardcoded" as mentioned before. Now I'm checking out your video and wanted your help clarifying this before spending un-necessary money on both buying the cable or having it re-coded. Thanks in advance mate, you rock!

[@LMAutoRepairs]

Hi I never had the beep you mention... it can be that is dependent of which circuit is or the software version... But.... kzbin.info/www/bejne/a3vPkKOle5holaM Myself or a fellow member, will be more than happy to help! Thank you for watching!

[@seazwar]

@@LMAutoRepairs és português? :) Image the beep that goes on (Chime) when a warning light goes up on the dashboard (i.e a lamp, the gas, a busted tailight) but repeated every 20 seconds while driving. I had a plate light going on and off for quite a while which I would assume was the cause of the FRM buffer to get high, but the warning is about the window anti-trapping system. So... does tool32 have that as well, and.. once the module "locks" is it able to unlock it... note: none of the funcionalities ever stoped working... just repeats the error every 20 sec. cheers

[@seazwar]

kzbin.info/www/bejne/pKfIqHuir5Wlebs this!!!! Just recorded it

[@elcheapotravel5914]

Hi Luis, a friend has a mini 2012 1.6 turbo someone stole the FRM module from it, he bought a used frm but obviously it didnt work is it possible to code a used FRM so it can work? some guys told him he needs the whole FRM key and DME combo wich is crazy expensive

[@LMAutoRepairs]

Yes... should be able to program/code an used FRM... Thank you for watching!

[@elcheapotravel5914]

@@LMAutoRepairs thanks

[@basilet8397]

Hi! I have an F07 with the steering column locked due to error 800FA5. How can I resolve with tools 32? Frm is FRM3, CAS is CAS4_2. Thanks.

[@LMAutoRepairs]

Never came across that problem... sorry...

[@basilet8397]

@@LMAutoRepairs Understood. I finally solved it. Opened tools 32, load the frm3.prg file, pointed to steuering routine and found the Elsv jobs. Performed a global reset of all cycles counters and now the column adjustment works again.

[@LMAutoRepairs]

@@basilet8397 👍👍👍

[@colassolorzano6353]

Hello thank you for taking the time to teach us.. Do you think this will work. For cc-di. 231. Code I got no signal light No interior lights And front headlight

[@colassolorzano6353]

Anything i will appreciate

[@davidrichardson8934]

Can the frm module cause reverse lights to stay on enen if not in gear Lights on all the time?? Thanks in advance great video

[@LMAutoRepairs]

Yes... FRM are prone to fail... As they are very sensitive to voltage spikes or low voltage... Just repaired one this week... video coming for it as well... Thank you for watching and for your comment!

[@davidrichardson8934]

@@LMAutoRepairs thank u 4 taking time to reply brilliant great video

[@LMAutoRepairs]

👍👍👍

[@ldee247]

Hi, I have a problem with BMW X3 E83 2.5i 2004 drivers side low beam not working and I'm kindly asking for your help. I changed my original headlights to Angle lights and only the driver's side Low beam has stopped working. I tried changing the bulbs but still, it didn't work I have also swapped the headlight units from left to right and realised the problem lies on the right-hand side as both lights only work on the passenger's side. I bought the K+DCAN with a switch and have installed BMW INPA software on Win 10 but I'm stuck on which FRM _ counter short circuit modules that need resetting as mine it's an E83 2004 model. How can I know my FRM_ if its FRM_70 or _90 or LSZ_prg before diving into Tool32. Any help I would greatly appreciate... Thanks

[@LMAutoRepairs]

Scan the car with inpa, all the details of the module should come up... Thank you for watching!

[@ldee247]

@@LMAutoRepairs Hello, I have managed to scan with INPA and mine comes under LSZ_2.prg but now referring to your video on 18:04 when you selected LAMPNRTEXTE[3][33] from the drop-down menu I don't seem to have that option I have scrolled to the bottom. Look here: i.imgur.com/yCAJfnx.png i.imgur.com/UH2iFxR.png Any idea I would really appreciate.

[@brianmashora4927]

I like the video. Please advise if the same module would affect headlights, indicators and hooter?

[@LMAutoRepairs]

Bebe Mash Hi Yes it would... as all the lights are controlled by the same module, and same rule applies to other circuits...

[@ollyhucker9814]

great vid! is this possible to do with Carly app??

[@LMAutoRepairs]

Hi Never used that tool... can't really comment 😕... Thank you for watching!

[@victorsaoliveira]

Another time a great job. Congrats

[@LMAutoRepairs]

Thanks! 👍👍👍

[@MrMaelias]

hi I have got bmw 1 series with few error ccid 88, 89, 231, airbags and DTC. I tried removing all errors but it keeps coming back. All lights are working fine, any help much appreciated.

[@rsingh4475]

Hi there sir, are you able to do this for me where abouts are you based?

[@mofilms1420]

So on my 07 328i. I had put aftermarket hid kit, I got the code for the left and right dip beam error. Swapped to original bulbs but error won’t go away. Also ran a scanner on there and it kept showing an shortage, causing also my thermostat to not be working properly. I’m so frustrated on this. Can’t find the solution

[@mofilms1420]

Not to mention that my headlights are working perfect, and also having trouble with driver locking door. I dont know if it has to do something with jt

[@LMAutoRepairs]

Manuel Barron Most likely that those issues will not be related... but hey, you never know... You need to tackle one issue at the time... For the headlights, it is weird that the lights are working and showing a short circuit... I presume you have tried to clear those codes and they just don't go away, correct? Thank you for watching!

[@mofilms1420]

LM Auto Repairs correct! I tried clearing them and they are there. One of my headlights housing it’s kinda damaged but all lights work perfect. I want to find out what program I need to scan the car more deeply to see if I can find an answer

[@LMAutoRepairs]

Manuel Barron Any scanner will scan in pretty much the same way... what you can get though, is tools capable of work in other areas of the module... like what I do here... Get the bmw tools and D-CAN cable, and check that your count for short circuit is not too high or something... if exceeded usually disables the circuit, but if yours still work that is not the case...

[@graeme9160]

Hey great video! I am having a slightly different issue and was wondering if you have ever come across it.... My 2007 E90 has the lightbulb warning light on the dash and the right hand side reverse light is permanently on, even without the key in the ignition!!??

[@graeme9160]

Sorry I should say that the other reverse light works as normal when the reverse gear is selected and also the parking sensors work fine also...

[@LMAutoRepairs]

Graeme Watson Hi Have you scanned the car? It looks like you either have a short somewhere, or an issue with your FRM... Scan it first... and go from there... Thank you for watching and for your comment!

[@joseromero8940]

Good escáner what model de scanner

[@LMAutoRepairs]

😊 👍👍👍

[@killsixz9047]

Next vid, how to fix dodgy ccc idrive ;) keep up the good work

[@LMAutoRepairs]

👍👍👍

[@none-qq9lg]

Hi have the exact same problem on a 2004 e87 rear light unit was burnt out, replaced board, all bulbs work apart from reverse on both sides, would this be the same exact procedure that needs to be carried out on tools32? or does it differ vehicle to vehicle?

[@LMAutoRepairs]

.none. The procedure should be very similar if not the same... you might find different options in different positions... but essentially, this is what you need to do to reset the circuit. Thank you for watching!

[@none-qq9lg]

LM Auto Repairs perfect thank you!

[@LMAutoRepairs]

.none. 👍

[@sixthsense7]

many thanks man. worked for me. you are great.

[@LMAutoRepairs]

sixthsense7 That's great! Thank you for watching and for the feedback!

[@kiwoneka]

May you share some links to all the software and tools you use - I have the exact same issue

[@rdshlywood]

I have a 2006 330xi sedan and the issue I am having is as follows 1. no lights at all work on the back of car turn, brake, running lisense plate. oH THE UPPER BRAKE LIGHT IN WINDOW WORKS. 2. all the headlights, fog lights, side lights and turn signals work in the front of car. 3. all the fuses are good 4. all the lights come on in the back when i check the individually with a jump wire. what can I do next, kind of stumped

[@LMAutoRepairs]

rdshlywood If the lights on the rear body are not working, then might be something else... the most common problem is the wires that run from the car to the boot lid, tend to brake, as per the video... but if you have nothing working... Measure the wires from the rear of the car to the light module... and go from there... Have you scanned the ECU? Any codes?

[@velvetmariaconsuegra8296]

Hi, Did you have an idea of how to disable the adaptive headlights? I have installed generic headlights on my BMW 325i 2006, and I want to clear or erase de BC error message "Adaptive Headlight", Thank You

[@LMAutoRepairs]

Mariitz Consuegra Coding... You can use ncs expert or other bmw coding tool...

[@zero202006]

Hello there? Where are you located in the UK? I have the exact same problem on my BMW e90? Thanks in advance. Great video by the way!

[@LMAutoRepairs]

Hi Do you have a D-can cable? You can reset it yourself... Thank you for watching and for your comment!

[@zero202006]

@@LMAutoRepairs Hi I don't have the cable but I could buy one. What I don't have is the software. I'm located in Manchester. How much would it cost for you to reset it?

[@LMAutoRepairs]

@@zero202006 If you get the right cable, it will come with the software... 😉 I am a bit far anyway...

[@zero202006]

@@LMAutoRepairs ok I'll look into it. Thank you for taking the time to reply.

[@LMAutoRepairs]

@@zero202006 No worries...😉

[@upkarbath]

I got e70 bemmer window,turn signal ,headlight doesn't work.do you think frm can be recovered or do ihave to change.than you

[@LMAutoRepairs]

Upkar Batth Hi First of all, have you scanned the car, are you sure that you have the same problem? Thank you for watching!

[@upkarbath]

LM Auto Repairs have you ever program used frm module on BMW?

[@LMAutoRepairs]

Upkar Batth Hi FRM no... I have done others though... Sorry if can't help you no further... Thank you for watching!

[@dk344]

only clear the frm87 one error memory cannot finish the job?why do you need to reset 1 to 4 error memory at first then clear them? I dont understand.

[@LMAutoRepairs]

I do apologize, but I can't understand you question... You need to reset the counter for the short circuit... clear the errors will not reset the counter... And the error will just come back. The error memory and the counter reset are two separate things...

[@dk344]

thank you for your answer.you are the bmw expert.my 2006 320d se anti-trap yellow warning light keep on ever 20 seconds.but all 4 windows can up and down smoothly.this issue happen when my battery dead.after I change another new one battery. window anti-trap warning light still on but all 4 windows work fine.I had tried to use INPA initial four windows .not work, yellow light still on. I had tried to read and clear fault codes. not work yet.would you tell me if must reset FRM code?how to do that?thanks alot.

[@LMAutoRepairs]

What codes do you have?

[@dk344]

there is not any fault code.I had used OBD2 software to read and clear fault code.And I had use INPA to read and clear FRM fault code.Its seem not any fault code have.

[@LMAutoRepairs]

ok Is the error for all windows or just for one? Or does not specify?

[@konstantinospapadopoulos7083]

The Best!!! Thanks so much!!!

[@LMAutoRepairs]

😊 Thank you for watching and for your comment!

[@dennisvab1]

This video helped me a lot!! I appreciate it!!

[@LMAutoRepairs]

Thank you, for watching and for your comment!

[@kiwoneka]

Sir, I just got a ms908p, is it possible to accomplish this programming of the frm? I don't have the USB cable you used

[@LMAutoRepairs]

Hi It should do it... providing you have all the subscriptions needed...

[@juanaguilar9908]

Hi! Great video. Does it work with a 2011 e90 328i LCI too? My power windows doesn't work and the cluster lights do not work too. All that happened before a aftermarket battery change. I'm desperate:(

[@LMAutoRepairs]

This is a procedure to reset shorts in the light module.... nothing to do with change battery... You haven't connected the battery the opposite way, have you? Thank you for watching!

[@Retro_Care]

excelent, good to see what tools you use also, thanks

[@LMAutoRepairs]

hamdit 👍

[@andymartinez5920]

Would this work for a e92?

[@LMAutoRepairs]

Should do... Thank you for watching!

[@d0miiilan]

I receive the error "ERROR_SELECTED_LIGHT" - can I also enter instead of "0x05" only "05"?

[@LMAutoRepairs]

Hi Ensure that you have selected the correct file for your module... Thank you for watching!

[@Freezefluid]

Hi, Thanks so much for this video. It has been very informative. Apologies if this has been asked before, but I am having the very same issue with both my tail lights and no garage seems to know what to do except to suggest that I find someone to rewire the electricals and I don’t believe they are right. Could you kindly list the cables and softwares that I would need to use so I can reset my lights? Many thanks in advance.

[@LMAutoRepairs]

Samurai Jack Hi Thank you for watching and for your comment! Google for bmcables

[@Freezefluid]

lmsvvavr Thanks a million for responding so quickly. Hope you keep making many more great videos...

[@mrm3686]

How can i download this program/software and i hope my laptop can be eligible for it. I have the same problem in my BMW.

[@LMAutoRepairs]

It comes usually with the cable... But Google for BMW tools software... easy to find... Thank you for watching and for your comment!

[@mrm3686]

@@LMAutoRepairs So when i buy this cable the instructions should come with it. If i need further assistance i will contact you.

[@LMAutoRepairs]

@@mrm3686 Yes... it should come with some sort of instructions on how to install... Not sure about specific procedures...

[@markeastwood954]

as always great vid and well explained. thanks for sharing

[@LMAutoRepairs]

Mark Eastwood Thank you for watching and for your comment!

[@lejkovski]

Great video. Really helpful. thank you!

[@LMAutoRepairs]

No worries! Thank you for watching and for your comment!

[@pawelm4502]

great video, I will try as I have a tail light issue

[@mapkrk1316]

Hi mate, is there any chance of you giving us a hint how to perform systemzeit_lesen (write) argument (value of) 1 in bmw toolset32 ?

[@LMAutoRepairs]

Mapkrk Has been long time since I done that... much before I had this channel... I presume you have replaced the SIM module with a second hand one, you have flashed it with your vin, and is already reset with NCS... You are know try to get the timer sorted... correct? Try systemzeit_start....

[@mapkrk1316]

lmsvvavr I have replaced STVL module and changed VIN number by Winkfp. I no longer getting a incorrect chassis number error but another one "962C". I did not code it with ncs expert. I google it and some says that it needs to be reset in bmw toolset 32. Thank you for fast respond. Regards

[@LMAutoRepairs]

Mapkrk Ah... ok... We were talking about different things... I have never came across that problem, nor had to replace that module... Try a basic coding based on your FA using NCS... save the current settings just in case... See if that helps...

[@mapkrk1316]

lmsvvavr Will do. Thanks for your advice. I appreciate it. All the best.

[@Mambre79]

Nice job, thanks for sharing.

[@LMAutoRepairs]

Thanks! For watching and for your comment!

[@Mambre79]

@@LMAutoRepairs Can u disable E60, E90 seat occupancy sensor with toolset32? I could not do the job with NCS-Expert.

[@siljo.]

what other things must be installed for Toolset32 to work ?

[@LMAutoRepairs]

José Silva Hi The emulator etc... it all comes with the package... What does not come is the daten files... those you need to search them... Thank you for watching!

[@siljo.]

lmsvvavr mine gives me an error when loading the FRm file EDIABAS Fehler 28

[@LMAutoRepairs]

José Silva Don't think I ever came across that one...

[@siljo.]

lmsvvavr it the end everything worked out thanks for the explanations

[@LMAutoRepairs]

José Silva 👍