BMW 335i gets a 3.5inch single exit exhaust that makes all the right noises

[@VehicleVirals]

Now just throw a 328i badge on it 😁

[@SwapDepot]

👀👀👀

[@xantor_]

@@SwapDepot dude I can mail you a 318d badge if you want 😂

[@nikopalonen92]

@@xantor_ i have black f30 316d badge😂

[@JosephGMarrero]

😂

[@Gambotheman]

True 😂😂

[@joebidden4914]

Nice to finally see a video from the twins into a single exit! Put a resonator in the middle and it will take all the raspyness out and sound perfect!

[@Art-lm4ik]

Finally someone who isn’t afraid to do it👏🏽Best sounding 335i

[@SwapDepot]

Jesss

[@TheNis240sx]

I did it to mine with just a resonator and hands down best exhaust sound

[@NewDesignVinylGraphics]

I had one on my f30 bruh. Shit sounded amazing

[@Art-lm4ik]

yall got me tempted to do it on my n55

[@TheNis240sx]

Take the plunge and standout

[@richcruz8924]

@Ali.. You and the PSI crew make DIY's and mods look like so much fun... NOT, when you don't have the lift or right tools, and most importantly a supporting staff.. love it.. 👊🏽

[@SwapDepot]

Sometimes it’s fun other times not so much I’m going to be leaning towards doing a lot of the stuff in my garage and such so that ppl can relate more

[@ThaHammieJaassee]

The guy holding the camara has a voice of your bad decisions telling you do it just one more shot. Hella deep voice haha

[@MustafaKhan-ph5hl]

Now this is quality rice 🔥🔥

[@SwapDepot]

😂🤟

[@JosephGMarrero]

Fried rice 🍚 😂 love it!

[@An0nDEViant]

That raspy fart can 🤢🤮. Other than that it's a nice setup.

[@matentenlisene6030]

Rice rice baby

[@3MTurbo]

How can yall say this is rice?😂 dual or quad exhaust on bmw’s straight 6 sounds rice!! No straight engine should have dual or quad exhaust! Period.

[@frostwolf-bi3yl]

love it i got a 2007 323i and have the same muffler keep getting given shit for it everyone says buy a 335i but different and unique is where i shine look forward to seeing more vids

[@marcelsteinemann9070]

i look so long for a n54 single exit thank you

[@massgass9131]

your 335 content is the best. subbed and liked, your buddies channel is super cool too, something about a korean working on a german car that just adds the right amount of spice. like kimchee. come sam me da. or something like that. 6:03 i have a pair of those safety glasses too.

[@MistakenMedia087]

I'm getting ready to do the equivalent with 3" on my e92 335i, love it!

[@marvin7083]

Did you do it ? How it sounds?

[@scrubbypotato]

Do you think adding a resonator would help with the rasp or would it not make much of a difference because it already has a muffler?

[@disagreed3976]

yeah probably

[@Christopher26021994]

Yes, it would. Although the muffler is a straight-through, on its own it is often not able to reduce rasp enough. Resonator would surely help. Additionally, decat very often adds rasp as well. If it would have a 300 or 400 cel racing cat and a resonator, I guess it would sound way less raspy and much deeper. However, it would surely get more quiet as well. Personally I prefer a deeper and less raspy sound, over volume, but each to their own, it depends from a personal taste.

[@wilfreddiazvellon7896]

See? you have duals exhaust and you want a darn single exhaust went looks super nice.And many ones out there wishing for their cars to be dual exhaust well I hope your cars get the dual you want always.

[@Arrozconchopsticks]

Thinking of going with a single canister myself. A Vibrant, HKS or 1320. It looks and sounds good imo.

[@Sean_junior22]

Finally more good sounding singles

[@voltron979]

Great video guys! I enjoy it, funny and informative. Kudos!

[@narciso19G]

One of the old school mechainics that I used to work with would weld with his eyes closed when tacking exhaust pipe. I had never seen anyone do that before and it threw me off 😂😂 I was like wtf is happening then I saw his eyes shut while he was welding. 😂

[@nikopalonen92]

For some reason my gut felt like that this car never saw those cats ever again..

[@SwapDepot]

Jesss

[@lanckston]

nick throwin it back

[@fabianschaible3490]

Awesome exhaust but sadly here in Germany this is highly illegal :(

[@The_TURK.]

Fresse

[@xantor_]

Thanks again Mr Jess! When's the FMIC install? :P

[@SwapDepot]

Doing all of that together with other mods

[@xantor_]

@@SwapDepot aight, can't wait!

[@modified_eurosport]

Greatest looking exhaust👀 I’m inspired🔥

[@christianaraujo3112]

Looks sick bro!

[@SwapDepot]

Jesss

[@Mr.Walker994]

Can you do a video on the e30 wagon?

[@SwapDepot]

Maaaaaaybe!

[@TP_Raks]

These guys are awesome 👍

[@DkKristie]

Jesss def chopping my VRSF and doing this

[@SwapDepot]

That’s definitely the easiest route and should be fairly simple

[@GalvanizedGreatness]

Mans is brave welding without that mask, it’s not fun when you accidentally burn your eyes

[@fredfrederickson]

Or blind yourself

[@GalvanizedGreatness]

@@fredfrederickson that’s if you stare at it

[@mulletor123]

This man is fucking nuts, no mask at all, "its OK he closed his eyes" I hear you say. I used to be like this ,but your eyelids get burned instead. And your face. Badly. Just mad.

[@FoggamingMc]

The guy welding definitely got arc eye that night if ur tacking Atleast use safety glasses if nothing else

[@AnManHydro]

Damm that sounds so good ❤

[@kevincook231]

Which muffler did you get for this install. Im doing my 3.5" next week and liked that muffler

[@SwapDepot]

vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=9247be5b0f85dc3167d21f74086aefd0

[@blrn54]

Vibrant gear is nice.

[@SwapDepot]

For sure!!!

[@TheHaCkEr899]

Where did you get the flange to build the y piece?

[@SwapDepot]

Are you talking about the flanges that connect to the downpipes or the Y section?

[@TheHaCkEr899]

@@SwapDepot The flange at 0:50 connect to the down pipe. I'm trying to build a single exit also just need to build that y section. Could you provide part numbers for each parts in the video?

[@SwapDepot]

It’s custom made, best bet would be to get the VRSF exhaust and modify the rear section

[@lyfzgoodgarage826]

What in the Honda have you done to a bmw

[@SwapDepot]

🤷‍♂️ trying something different

[@zacbullock3268]

I might do that to mine!

[@andrewfairchild1028]

Hm he said or twins he should do mmp1k kit those turbos are soo nice

[@SwapDepot]

Heard mixed opinions on those, not sure if I wanna spend 3k on a twin setup 🤷‍♂️

[@milehighboost5521]

@@SwapDepot dont blame you. Its nearly single turbo kit money. Especially if you can fab up the exhaust manifold yourselves.

[@SwapDepot]

Yea that’s why I don’t wanna spend the money, plus I already have something, video will be posted soon

[@estevanperezz]

muffler link please?

[@BuiltInTheRain]

Looking to get a single exit on my single turbo e90

[@jamescrayton9360]

That fade

[@RC-fh5mq]

Hell jess bro that's what I'm talking about

[@SwapDepot]

Jesss

[@ramonbarronjr2570]

Yo that looks dope I’m gonna go this to my E90 soon you think the extra width pipe is worth it? I was gonna run 3” exhaust pipe

[@SwapDepot]

Definitely worth it and sounds better

[@ramonbarronjr2570]

@@SwapDepot bet appreciate it 👌🏽

[@PlebEjGreg]

Sounds so good 👍!

[@SwapDepot]

Jesss

[@VR30Jayy]

5:55 Where Do I Get That Part Or What Do I Need To Buy To Get It Custom Made

[@SwapDepot]

Y pipe and 2 flanges for the downpipe to make a custom piece

[@VR30Jayy]

@@SwapDepot Should Make Your Own Single Exit Exhausts For N54 There Isnt Any 👀👀

[@mahmoudberjawi7448]

Bro seriously where is your shop at

[@SwapDepot]

Orlando FL

[@fredfrederickson]

I’ve been thinking about getting something like this for my e92 335 then buying a 328 bumper and badges lmao

[@davidlee3203]

nice exhaust i woulda did the same good taste i like the sound gratz.

[@claytization]

Where did you get the 2-1 collector?

[@Arma25]

Where could i buy the long mid pipes you have?

[@SwapDepot]

Vibrant performance

[@ElChapoDel8]

now it needs a bottom mount single turbo kit

[@dreproductionss.g.e5749]

What would the average cost to get a job like this done ??

[@LIL_BRIZzz]

I wanna see more of that e60 M5 !!!!

[@juanlandaverde97]

Hey cool I like that sound how I can get one for my 335I coupe?

[@SwapDepot]

You would have to build it, would take it to a exhaust shop and see what they can do

[@buddhamane7126]

I wanna do this

[@azannascar9687]

What are the benefits of a flex pipe ?

[@SwapDepot]

Prevents cracking of the exhaust since the motor and transmission move around while driving and it allows you to move exhaust a little bit to make it fit right

[@zayjoseph9180]

The guy holding the camera sounds like Sam Elliott

[@rickywelds994]

Did you cut and reuse the flanges that connect to the down pipes? Or did you get that merger from somewhere?

[@SwapDepot]

Had a fabricator make the y section

[@robwubwub94]

Do you have links to all the parts used?

[@robwubwub94]

Specifically that 2.5” to 3.5” merge pipe

[@chrisbmw30]

how did you source the collector from the downpipes to single 3" ? was this custom made also?

[@SwapDepot]

Custom made

[@chrisbmw30]

@@SwapDepot any chance the fabricator wants to make another? $$

[@SwapDepot]

I have a collector that would work

[@chrisbmw30]

@@SwapDepot I’m interested….

[@shavonbrown2601]

Can I get his information. Because I really like the sound of your exhaust and I’m trying to get the same one. I also preferred single than dual

[@typedrew]

Is that Y pipe a custom piece or purchased?

[@SwapDepot]

Custom

[@frankiewalnuts]

Is that all mild steel? Assuming cus of the mig welder

[@SwapDepot]

Mig welded because it was easier to do at the time

[@Chxrlito7]

link for the tip

[@johnstevens7049]

Which vibrant muffler is that?? Also stock downpipes or catless? pls it sound soo good I need to know lol

[@SwapDepot]

vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=9247be5b0f85dc3167d21f74086aefd0

[@SwapDepot]

VRSF downpipes

[@johnstevens7049]

@@SwapDepot thanks!

[@SoyElTonka]

I just found your channel. I don’t follow many channels but you guys had me laughing haha. Where in Florida? I have an N55 2011 535i and wanted to do single exit as well.

[@SwapDepot]

Orlando area

[@Tyron649]

Where can I find the complete set up?

[@SwapDepot]

Its custom made, nowhere

[@Slaysian46]

where did you get that Y piece

[@SwapDepot]

Custom made

[@peterdableeder4487]

Nice

[@Madsen1502]

Sounds great.. but you should have tig welded it.. and a better fit to bumper :)

[@SwapDepot]

I’m ditching that stock bumper anyways

[@alexanderaniol9528]

Question what rims are those and size ?? Lol

[@edburkhammer]

JEESSSSS!!!!!!

[@CouldBawake]

where did yall get the Y pipe??

[@SwapDepot]

Had it made out of scrap 335 exhaust I had laying around

[@kaydenchap10]

where did you get the muffler?

[@SwapDepot]

Amazon

[@TjWoo]

is that a vibrant performance muffler??

[@SwapDepot]

Yes

[@MikkelMcKinnie]

where can I get that y pipe

[@SwapDepot]

Custom piece

[@___rocaj]

nice

[@islandjeeps921]

Jeeesss ! 💪🔥🇵🇷

[@andrewohara8802]

why does it sound like a 328i now? these normally sound like 2j's

[@SwapDepot]

What are you talking about, have ever heard a 328 that’s straight piped??? Twin turbo n54s don’t sound anything like a 2j btw

[@Therealrichdude]

Only dude in the world who wants his BMW to look like a Subaru 🤣🤣🤣🤣

[@eskania]

Any power gain

[@SwapDepot]

I’m sure there is some but I couldn’t really tell

[@dawids280]

Downpippe?

[@dunnbizzy79]

You should open your own shop.

[@keonlaxina3161]

link for the muffler?

[@SwapDepot]

vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=38b65167f234a2aac121c68f8560c1d2

[@qx4n9e1xp]

I want this on my e82

[@Lu-e]

Everybody gonna start doing this just watch

[@SwapDepot]

We shall see 😂

[@RealdealSkip]

Definitely not lmao

[@MatthewGlad]

Did the exhaust make any more power?

[@SwapDepot]

Little bit 🤷‍♂️ can’t tell since the car has bad turbos

[@topgun779]

It will you have better flow through the exhaust rather than the true dual coming out the back. Also a lot lighter weight. You get a 2 for one special

[@SwapDepot]

Yea for sure!

[@autobahn_cj]

where can i buy this dope!!

[@SwapDepot]

Unfortunately it’s not for sale unless there is a lot of interest in the system then I might consider selling 10 to 15 systems at a time to people that are willing to pay

[@edgarlozano2998]

How much would this cost? Pretty interested

[@SwapDepot]

With fab and parts around 1500$ and that’s tig welded not mig

[@edgarlozano2998]

If you do decide on selling, u can count me in.. but I think shipping to Guam 🇬🇺 would cost alot.😭

[@SwapDepot]

Yea the shipping would definitely be a lot

[@carlotheatheist]

would it possible for m5?

[@SwapDepot]

Which M5?

[@SwapDepot]

Which M5? E39,E60,F10,F90?

[@matentenlisene6030]

🤣😂🤣😂 laying pipe tonight just killed me you look so innocent your too precious for this world dont talk like that lmao Christian is a bad influence on you Ali

[@settounite]

Wie kann man ein auto blos so verhunzen ey ihr amis habt doch einen dachschaden alter

[@dfqnexxus3710]

It can be fitted on a 135i?

[@SwapDepot]

Yea probably just slight adjustment

[@dfqnexxus3710]

@@SwapDepot can you link the parts that you buy online

[@SwapDepot]

vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=2fdbcc8eab57420f80fd32881417440c

[@SwapDepot]

And all the piping can be found on their website

[@bcg5175]

been wanted this for my e82 n54 too

[@n3on170]

Jesss?

[@SwapDepot]

Jesss

[@narciso19G]

This shop really looks like LZ’s old shop

[@Bobo_2606]

Has this been done on a 320d? 😂 I would rather do that than another 335 dual conversion...

[@adriantomalik4556]

Jesss!

[@ArisHDi]

why single exhaust?

[@SwapDepot]

Cuz why not

[@ArisHDi]

@@SwapDepot idd

[@AbrahamMusalem]

Jesssss man

[@UlisesNQ]

Still waiting on the video for the twins 😩 jess

[@SwapDepot]

Coming soon!

[@PR0bro]

I really like it but i hate the farty raspy sound up top

[@SwapDepot]

After breaking the muffler seems to have little to none drone or rasp

[@markt9438]

Jess,say it is not SO !

[@sbperformance7320]

They definitely watched South Park

[@sadatx101]

Fart can noises ftw

[@risengaming4044]

Imma do this then put 323i badge on it (canada spec 2.5L)

[@clbenjamin79]

I found out welding in socks and slides are a bad idea lol

[@waihen8799]

Idk why but this sounds like my old m52 lol

[@kirami931]

he litarly made it a supra