BMW B-77/C-75 Pazzo Levers install video

[@goodgravel]

Excellent commentary on how critical the adjustment is. I watched several other videos on lever replacement and none of them mentioned this critical aspect. Thank you so much.

[@eduardocamara3863]

This is by far the best Levers replace video for BMW R 1200 LC on youtube, you should change the title, you`d get more views. Thank you very much for posting this

[@cpeu671]

Thank you so much for this video, liked the fact that emphasized the measuring w caliper, had not seen that in other videos. Just installed my new #wildatheart 2- finger clutch and brake lever, amazing!! Keep up the good work!!!

[@iamrider2539]

This is the video! This is it! Great work!

[@deannicholas7673]

Excellent video sir! Many Thanks

[@fastlanediaries6593]

Hello this is very helpful. I want to retain my spares. But have you any idea how to remove the cam from the standard lever? I have ordered some Pazzo levers from speedycom in the Uk. Fantastic quality 😍

[@czerwonadupa9547]

I would really like to know how you removed the 2mm screw in the side of the barrel so easily as I've found it impossible & the BMW mechanic said BMW use a red substance with minute beads to lock the threads in place & you would need to heat it to soften it up but that your likely to melt something. Plus BMW don't sell the barrel, screw & plunger separately.

[@pazzogmail8728]

I did not fully remove the 2mm screw. At 2:25 of the video you'll see I just cracked it loose no issues at all. It just has to be loose, not all the way out. I did not have to heat up anything, I cracked it loose without issue.

[@czerwonadupa9547]

Thanks. I found your video the best on KZbin showing & explaining clearly how to replace the levers which is why I was trying myself., I did hear the crack when I played it first time round. I'll buy a decent T handle 2mm Alan keyed driver & give another go.

[@czerwonadupa9547]

Just like to thank you Marcus for your video. I asked my BMW dealer in the UK if they would change my levers when doing a service but they wouldn't saying they didn't have a spare lever in stock if something went wrong. Apparently you can't buy the barrel, plunger & 2mm grub screw separately, they make you buy the master cylinder with them. After buying a digital calliper & a decent T handled 2mm screw driver & following your video I managed to change my levers today. The brake screw I cracked opened but the clutch I needed to use my wife's hairdryer before it would come undone. My measurements were practically identical 40.5mm & 38.3mm on my BMW R1200R LC. Once again Marcus thanks for your help, great video.

[@johnhigton4599]

Do they fit the 2020 R1250 GSA

[@pazzogmail8728]

Yes! The B-77/C-75 adapters fit R1250 GS models up to 2020.