BMW b58 Oil filter housing Upgrade? or not ?

[@nflp7]

You can also show us the automatic transmission oil change, if possible.

[@MOvidiu]

I didn't film that !

[@nflp7]

@@MOvidiu In the future, if there is an opportunity, we would love to see it.

[@limaiemheykel]

i'm seeing RTV tube where did you use it?

[@wojciechg1971]

Did You measure the right oil pressure before start the engine after this operation?

[@tak142]

Hello, I have seen that you have replaced the oil filter body and heat exchanger gaskets of the new part with original BMW gaskets. My question is, which heat exchanger have you installed in the car? Thanks. Best regards.

[@MOvidiu]

The new one !

[@tak142]

@@MOvidiu Thanks.

[@garyalarcon4332]

Hello for the oil filter housing you replaced both the heat exchanger gasket and the gasket that goes on the engine block with original oem ones correct ?

[@MOvidiu]

Yes!

[@Bill-jq2eo]

Is the aluminum one stable?

[@27ecobeast]

Did you reuse the fasteners from the old housing or ordered new ones? Thanks!

[@MOvidiu]

Reuse the old OE ones

[@istvan.design]

salut, ai grija ca cele doua rezervoare comunica si dupa ceva condus auxiliarul va fi pe jumate gol si va trebui reumplut. (daca auxiliarul ramane fara lichid masina nu da eroare ci va duce la suprapresiune la AC si se va tot opri-porni AC-ul din 10 in 10 secunde) Am patit asta dupa ce s-a schimbat radiatorul si dupa ceva condus a scazut nivelul la auxiliar.

[@MOvidiu]

Salut! Multumesc pentru sfat ! Dar acea problema apare când antigelul e schimbat fara a folosi echipament special .

[@MrFryfish]

Acelasi echipament e recomandat si pentru B47?? As vrea sa schimb antigelul fara acel apart. Se poate fara a fi probleme ulterior? 😮

[@MOvidiu]

acel echipament e folosit și recomandat pentru toate motoarele bmw , se poate și fără el ! nu ori-cine are acel echipament !

[@MrFryfish]

@@MOvidiu Multumesc frumos pentru raspuns. As vrea sa gasesc ceva similar pentru ca ii inteleg importanta pompei.. numai ca e prea scump pentru un DIY care sunt la BMW ce le am.. dar e cam scump ce ai tu. Plus ca tu esti profesionist, categoric! Mai caut solutii.

[@JorgeArrieta-w6d]

What's the water pipe u replace call

[@MOvidiu]

Connector

[@mikec3405]

So after vacuuming, did you just let air and old coolant in?

[@MOvidiu]

Yes ! The void inside the cooling system was replaced by coolant !

[@anidiotinaracingcar]

Isn't there an oil pressure light on the dash?

[@MOvidiu]

No !

[@leksandr_alt]

👍👍👍

[@GuardianMB]

Great job! I`m planing to swap the engine from B48 - B58 on my F20 hatch back, what do you think?

[@khyrofilms]

so simple, but i prefer old BMW N/A engines ;) ;)

[@MOvidiu]

Which ones?

[@khyrofilms]

@@MOvidiu M52/M54/M62/S62 ;)

[@MOvidiu]

​@@khyrofilms got you! Old school!

[@alex230ro]

@@MOvidiu not really, M10 M20 M30 those are old school , I prefer those also ,not so much plastic vs new ones components are usually stronger.

[@pipenbmg]

Awesome. Do you any trustworthy online shop for aluminum aftermarket parts replacements like AirMinifold or Cylinder head cover for BMW F46 for example ?

[@MOvidiu]

Not that I know of

[@27ecobeast]

Do you have a link for the oil filter housing? Thank you!

[@MOvidiu]

In the description

[@mikemanolache4879]

Nu am găsit nici un link😅😅

[@MOvidiu]

realoem.com , cu seria de caroserie, de acolo iei codul de piesa! și cu codul de piesa pe google.com o sa găsești tot ce vrei !

[@piotrm_____y9457]

😊😊

[@protams1]

But why?

[@MOvidiu]

Why what ?

[@ubuntufanclub]

because original oil filter housing start to leak around 100,000 km ask me how i know😂

[@protams1]

@@MOvidiu Upgrade

[@mirceastoica1565]

Because on B48 water is lost in matter of seconds and high temp message appears and you have to stay pasager in a tow truck if you don’t want to fry your engine. Ask me how I know.

[@Milian7771]

Can u make more vids about B58? I watch with pleasure ur vids.

[@MOvidiu]

Il keep that in mind!

[@BasRikken]

use the stock one, its the seals that give out so aluminium housing wont help, an possible is worse with the heat it wil hold

[@MOvidiu]

I can't tell how good or bad the aluminum one is, but I can say that almost all I had with a leak, the leak was from a cracked lip on the housing exactly where the gasket sit ! On both b58s and b48s

[@mirceastoica1565]

Revii cu un video peste 3-50k km despre cum se prezintă situația cu el montat?

[@MOvidiu]

Daca o sa mai am vreodata sansa sa intalnesc masina asta !

[@chijiokeudeani9378]

You now own your own garage?

[@MOvidiu]

Not yet !

[@AureonTech]

Did you replace the intake manifold gaskets ?