BMW coding is easier than you think. Full E-Sys coding guide. Part 1

[@Quizzer11]

as an engineer who was developing the F Series from the begining i must say. very good tutorial.

[@BimDoc]

Glad you liked it

[@kiddflashygaming889]

How do I program my bmw F44 gran coupe to accept my new digital instrument cluster?

[@Quizzer11]

@@kiddflashygaming889 Rheingold and a Ethernet obd cable is the key. U need also a valid esys Account.

[@batdevice]

By far one of the best E-Sys coding guides on KZbin, Thank you for all your work and attention to detail, Keep up the good work Vladimir!

[@BimDoc]

Thank you ))

[@itsQyada]

Finally someone who explain step by step and really easy to understand. One more favourit yt channel about coding :)

[@BimDoc]

You welcome

[@Hawk-rg3iz]

You are a legend Vladimir ~ Thank you - I am only starting to learn about coding and this is the best video I can find... Thank you

[@BimDoc]

You are welcome!

[@ВольдемарБАХ]

У Владимира уже были практически такие,даже полнее видосы на Русском языке,поэтому,осуждать его не стоит,он,и так очень много дал, нужного,и полезного,ну решил попробовать себя,в англоязычном варианте,гуглите его видосы,и найдёте для себя на русском,даже более детальные варианты,так как он обьясняет суть темы,не один блогер,с ним не сравнится,Владимиру респект,и уваженние!

[@BimDoc]

Благодарю )

[@АлексейРоманов-ю9р]

@@BimDocздравствуйте По удаленке сможете установить программы? За денежку конечно же)

[@kentrolla]

Not sure if you'll ever see this, but this video greatly helped me in understanding everything I needed to know to code on my 22' S1000RR. Everything went smoothly and working great! 🤟

[@BimDoc]

Glad it helped!

[@Crafty266]

Hey. What exactly did you code on your S1000RR?

[@kentrolla]

@@Crafty266 enabling DRL, M startup screen, 5 level heated grip.

[@pmarotos]

Tremendous tutorial. Big Thanks from Portugal. And props to your english speech, although you are not native you try to express in the best way possible. Greetings from Portugal!👍👍

[@BimDoc]

Thank you very much!

[@aladdaalraie9443]

the best one in KZbin who explain E-sys it learn me how to change code in head light

[@BimDoc]

You welcome ))

[@kepmic]

Wow !!! Great tutorial. Actually best I've seen on whole YT. Great Job. I also check your website - GREAT idea !

[@BimDoc]

Glad it was helpful!

[@alisamir6350]

So informative, thank you so much 😊 please make another vid about installing used modules🙏🏻😇

[@topmonkey6512]

Hi, this video is great!😀 This is a video of me using Topdon's product Phoenix Remote to perform the encoding function for BMW's CIC module: kzbin.info/www/bejne/onvUaaN4bppjoaM , share it with you here, you can refer to it. If you are interested, you can click to see it, or you can give me your opinion. There are more videos on my homepage that use different equipment to make different functions for the car. You are welcome to follow me, and I am also willing to answer your questions. question. thanks.

[@MrHcbal]

I have been looking for a channel this kind of sort, finally found one.. Good job mate and all the best. Cant wait for the website...

[@BimDoc]

Welcome aboard!

[@mouraum]

Amazing video!!! I'm on my first BMW and new to BMW world... Was completely lost. Thank you so much!

[@BimDoc]

You are welcome 🤗

[@aymenbenarous4908]

Hello brother,I just finished this video and I benefit a lot, can’t wait to finish the other videos

[@BimDoc]

Enjoy 😊 There is a lot of information

[@audriuskimtys7943]

Thanks, ACIU, Spasibo. Best regards from Lithuania. Can YOU say your opinion about HEXTAG or BMW Explorer, thanks!!!!!!

[@BimDoc]

Both are very good powerful tools! Not for beginners for sure. Nothing bad to say about originals of those tools.

[@steve5587]

Very thorough explanations. Thank you.

[@BimDoc]

Enjoy ))

[@Neclw]

Great video! This is perfect for a beginner. Thank you

[@BimDoc]

Glad it was helpful!

[@toragaragegalway3572]

perfect! great video! will try again to connect my enet cable :P

[@BimDoc]

Of course. Give it a try 😉

[@artjom01]

Waiting for your website! Even if I am not planning to code myself it would be nice to have a list of all available coding options and understand the capabilities and hidden features of my bmw

[@BimDoc]

Yes that’s why I’m planning to to that kind web site.

[@CastleMotorsLeeds]

Hi Amazing tutorial on using the ESys for beginners , bravo Sir, can I ask you a question please if you have time to tell me please , how do I convert f10 car from km to mph please . Thank you in advance . 😊

[@BimDoc]

90% of that is doable via coding. But some parameters are written in EEPROM and require programmer to change those

[@CastleMotorsLeeds]

Can you guide me please ?

[@uTAPOUT1]

absolutely legend. Great delivery very clear and simple. Thank you!

[@BimDoc]

You welcome 🤗

[@franklecock2648]

Hi, thanks, thats possible, my car was a month ago with the dealer for a service, but at the moment no charges in the option list. Grtz, Frank

[@raw4u22]

Great video. I just stepped into the BMW world with my first bimmer being as a x3 M40i.

[@BimDoc]

Welcome aboard )))

[@darius9791]

Very Good video with perfect explanation, I will wait other installation software and use programs

[@BimDoc]

))

[@gmarinelarena8675]

Doc, thank you for taking the time to explain in this detail!

[@BimDoc]

Glad it was helpful!

[@bojkoooooo]

Quite useful, looking forward to seeing more videos from you!

[@BimDoc]

Part 3 will be released soon )

[@Arccchi]

видос топ, максимально информативный. Жду следующих частей))

[@BimDoc]

Пишите в комментах про что хотели бы увидеть следующие части!

[@lionzion5042]

This video is incredible! I’m yet to try, but make me order an ENET straight away! Thank you and look forward to more videos!!

[@BimDoc]

I’m glad that it was useful ))

[@laz001]

HI Vladimir - I have a 2016 F10, and I'm looking to fix my RDC module When i go to the ECU parameters - all the coding parameters are just 'dots/bulletpoints (like show at 21:14)' and not words. Where do i need to go to understand what each item is?

[@BimDoc]

I’ll release video about launchers. I’m covering that information over there

[@80Scud]

Thank you man, been waiting when you start making english videos, much appreciated!!!

[@BimDoc]

You welcome!

[@adamgoldcar3669]

Hi! Do you have a similar BMW F series programming video? e.g. replacement of HU NBT with a used one? Regards

[@BimDoc]

Exchange of the ECU will be the same on F and G series. But activation of the navigation function itself in headunit will be different and depend of the heaunit type

[@Reesakee]

I use MHD black WIFI adapter fo Esys and Ista. It has a lan port as well. One issue though, during some Ista service tasks, where I need to turn the engine on/off, it shows "connection disrupted" errors..

[@BimDoc]

Icom and regular enet should not give those errors

[@roningumi]

Thank you Vladimir for your good explained video. I've a question please, I have my ACSM flagged red in ISTA, can I solve the problem by updating the ACSM please?

[@BimDoc]

If in ISTA ECU is RED it means it’s not responding and that’s why it’s impossible to update that

[@Derevenskyparenfedka]

Спасибо! Всё понятно и разложено по полочкам! Наконец то закодировал TJA с алиэкспресса :)

[@BimDoc]

А пожалуйста ☺️

[@DoshaYama]

Как всегда ТОПчик👍👍👍

[@BimDoc]

Good 😊

[@bluey0582]

Very well made how to video. Awaits your part 2.

[@BimDoc]

Part 2 is in the plans.

[@MustafaAli-ri3bx]

Are u crazy that was insanely well explained. Btw. your website is up, and I wait to get started with coding 😁

[@BimDoc]

Website is still under construction 🚧

[@ooGQoo]

Great tutorials, I have all the equipment but none of the knowledge. I have a 2011 F11 and when driving lost all audio for some reason. Along with four speaker fault codes I have B7F87F & B7F8AA stored. I’ve never done any coding on the car but have had the engine and g/box re mapped a couple of years ago. Any idea where I go from here Vladimir? Thank you

[@BimDoc]

Audio lost happens sometimes. You need to code CiC and it will work again

[@dgkiwi]

Excellent video - - what are the minimum specs for the PC, windows version and how do you set up the USB C port to talk to the ethernet adapter? Can you show how to remove the BMW gong sound when the vehicle is put into reverse....in fact, remove the gong sound from everything !

[@BimDoc]

There are actually no special requirements. SSD should be big enough to fit databases (full data can weight around 300GB)

[@dgkiwi]

@@BimDoc Ok thanks, i think I need to update my SSD, only have around 80GB free.

[@menjalara]

Very well explained and clearly delivered. Well done and thanks.

[@BimDoc]

Glad it was helpful!

[@ChaseDobbie-dt7mn]

Great video Vladimir! Do you have a cheat sheet for the F21 LCI? Specifically for coding cruise control?

[@BimDoc]

Cheatsheet will not help in your case. If cruise control is not present from the factory then some hardware modifications are needed (ecu replacement) and only then coding via FA

[@OnTheFenceUK]

@@BimDoc I have fitted the switch module on my MFSW already. I’ve been told I need to add 544 to the FA, then code FEM, ICM & KOMBI but I haven’t been told what to code in those ECU’s? Firstly; is the above correct? And is it a case of adding 544 into the FA, then simply selecting ‘Code’ on each of those ECU’s?

[@emre_murat]

hi, very nice step by step videos. thanks for the effort. simple question, can we use e-sys 3.30 and e-sys launcher pro 2.8.1 to code 2023 G20 lci or need higher versions to access all ECU's.

[@BimDoc]

No, that launcher is too old for that!

[@emre_murat]

@@BimDocwhat version of the softwares do you recommend for this car ? Or just bimmercode will do the job for coding ? I want to be able to access all Ecu’s, i mean when i find a cheat sheet but i cant do what it says there because i can not access some modules, it will be disappointing.

[@jonmaudal7584]

Hello, Thank you for your e-sys videos. Since I am new to e-sys, what should I use for the open connection for Mini Cooper S. R53. Jon

[@BimDoc]

I guess it from the generation where ncs expert was used to code BMWs

[@sggab5288]

excellent presentation my friend, I have a quick question; I don't see F90 M5 under target selector or main series, how can I get support for that ?

[@BimDoc]

It is still S15 platform

[@sggab5288]

@@BimDoc Thank you! Are you available to do remote coding? I just sent you an email. Cheers bud

[@ivanrybkin9384]

just a note, FA is not Vehicle Order from German, it will be FB=FarzeugBestellung, maybe it is meant to be FarzeugAustellung, but then ot will be Vehicle Exhibition? so not sure what the real writing in German for FA

[@BimDoc]

Good to know, thnx )

[@ivanrybkin9384]

вероятно FA это FarzeugAufgabe

[@michaelsorensen5982]

As always, super smooth and nice information!!

[@BimDoc]

Enjoy

[@tamaninesauc]

Hello ! Brother im from Latvia and just bought my 2018 M550i it was crashed and hood pyrotechnics were deployed, i wont replace them and was wondering if i can remove the code the same way you showed in the f10 tutorial ? Thanks for the amazing tutorials !

[@BimDoc]

Yes you can it it via exactly the same solution )

[@AFOKL7]

Great video and explanation,I have 2014 528i,planning to change screen to wider and I guess I need coding. Which ECU would be responsible for navigation system as well as all multimedia? I want to change all that and be working. Thank you in advance,hope you’ll see this comment.

[@BimDoc]

On your car just changing the screen is not enough. While headunit exchange is needed.

[@bartubaysal4858]

Incredible, this guy is a true legend. Thanks a lot...

[@BimDoc]

You're welcome!

[@mechatronicha5291]

Can i do programming for new body control unit with esyplus

[@BimDoc]

Yes you can do it via esys ultra

[@mechatronicha5291]

@@BimDocthank you the procedure same as update software or different

[@shaazy]

Amazing video. I recently had an ECU swap on my f82, but it seems like the infotainment was not coded correctly afterwards, so that there are no M specific menu items available, nor is the bluetooth visible, nor is the ASD working, nor is there any sound in the speakers. I feel it may be a coding error. Would you by any chance know exactly what module to code correctly to get them all working properly?

[@BimDoc]

I’m working on a video: which ECUs to code after FA change Stand by

[@shaazy]

@@BimDoc Thank you! Interesting you say that, cause I am understanding the theory of this before playing with E-sys. Technically, my FA was not changed, as new ECU must have been cloned to my car (2016 m4), yet the HU seems to have lost all its factory coding. So I'm guessing, the CAFD file is somehow missing or corrupted and needs to be injected, instead of me going into FA and changing VO individually. Do you think I've got it right? (Im a total noob with E-sys btw)

[@shaazy]

@@BimDoc quick update, I noticed CAFD was missing under Hu_entrynav, injected that in, coded and it's all fixed! Thank you for your videos ♥️

[@terryevans1956]

@bimmerdoc have you seen how to code easy entry/exit on the G30 platform?

[@yurizdrak8209]

Simple and informative videos. Great way to explain live to what is what. Thanks Tavarish.

[@BimDoc]

Glad you liked it!

[@yurizdrak8209]

@@BimDoc Да. Я пытаюсь закодировать Antidazzle Led на американской машине и пройти кодирование VO, но застрял на последней части, потому что использую ланчер 2.8 и не имею чит-кодов.

[@BboyVReck]

Thanks! I'm planning activate launch control. I like to make backup just in case.

[@BimDoc]

Sure. See all esys for dummies manual. I’m explaining there how to make backup as well.

[@phuctannguyen3744]

Your videos are very helpful, I will wait for the star videos. Thanks very much

[@BimDoc]

You welcome 🤗

[@1171karl]

I've watched this and part 2, very interesting and this seems a better option than using Bimmercode or Carly. One think I need to check though - you said I need a database file, psdzdata. What do I do with this? Does it need to be linked or installed to E-Sys, and how do you do this?

[@rinalds2m]

Hello from Latvia, Vladimir! Is it possible to to activate remote start for my G31 2018 only with coding? Or some hardware is also needed? Best regards. Awesome video. 👍

[@BimDoc]

Working on current solution. Maybe yes, maybe no )

[@redbloodninja]

Great and helpful. Please go ahead :) thanks for ru subtitles.

[@BimDoc]

You welcome. I’m still planning to make full subtitle support in many languages!

[@k8myx]

Excellent video thankyou very much i am looking for the F30 cheat sheet do you have a link please

[@BimDoc]

All cheat sheets will be available on a website in the future

[@dopiaza2006]

Double thumbs up - this was a perfect video. I am hoping I can code a new headlight TMS module on my F32 with this information. Any tips would be much appreciated of course!

[@marvinisrael1671]

Do you have any guidance on using Bimmer Utility to code for European laser headlights on the U.S. BMW i4-40? Is Bimmer Utility easier to use than Esys?

[@BimDoc]

See my guide about comparing all launchers for esys For laser light coding see esys manual part 2 to get the idea how it works.

[@afcsorin]

Hi mate, this video is great. I'm looking to code reverse camera for my bmw 520i g30 2018, do you know if there is any tutorial? i mean, the codes...anywhere? thanks

[@BimDoc]

If you follow that manual part 2 then you will be good

[@robertpattengale2511]

Excellent video, starting on Part 2 right now

[@BimDoc]

Hope you enjoy it!

[@sonofchrist73]

My first time watching and it’s a great and informative video. Appreciate the full explanation. I’m hoping to able to code in some aftermarket headlights I bought for my f15. Everything works but DRL plus getting lighting errors.

[@BimDoc]

If they are bmw made then you will be okay If Chinese, then not always everything works (

[@sonofchrist73]

@@BimDoc Appreciate you replying 👍🏼, they are from China, AliExpress. Someone else showed me on Facebook they had the same lights from China, had same problem but used ISTA and esys to make them work without any faults. I’m just doing any research to help me code these in.

[@sonofchrist73]

@@BimDoc Also the lights I bought look very similar like the ones you flashed in part 2 in the beginning , at the 2 minute 54 seconds part of video

[@qusaykambal6903]

Hello first of all thanks for this video... where is the links of platform of coding you are talking about in the video

[@BimDoc]

In the description. Desktop and phone versions show different versions of the description

[@qusaykambal6903]

@@BimDoc ok thanks

[@tomahawkk]

Thank you! This is a really detailed and informative video. What would you suggest to stop folders from being trimmed? After clicking edit NDC all folders where functions are shown are displayed as "." (Just a dot). Coding an F21 E-sys 22.10 Launched Pro V5 Newest psdz

[@BimDoc]

Try to use another esys version

[@tomahawkk]

@BimmerDoc thanks again, will do 👍

[@cb500]

some recommend NOT to use an RJ45 to USB adapter on the link (especially for flashing) and yet not you, is there a particular reason please?

[@BimDoc]

Of course it’s better if your laptop has built in RJ45 output. But new laptops do not have that any more. So usbc to RJ45 is only solution. But be a are that some RJ45 usb adapters might not be reliable. How to understand? You start flashing bmw and if it fails, then you know that current adapter was not the best one )

[@cb500]

@@BimDoc I only have USB 3 (blue) on my LAPTOP will it remain stable please with an adapter please? PS: your videos are awesome keep it up you're great!

[@mefisto7654321]

Hi Vladimir! I've just discovered your channel, super useful information here. Much appreciated. Subscribed instantly. Thank you very much for posting this guide. I want to start retrofitting some things on my F30, I heard that I don't need a launcher for E-SYS for that, because it is FA coding and the launcher is needed for FDL coding. Is this true?

[@BimDoc]

You are absolutely right. Launcher is needed for FDL coding only.

[@iandonkin6762]

This is an awesome video, following which I was able to navigate to the correct area in my i3 configuration using Launcher Pro 2.8.1 to change the nav coding from the business to professional screen size (which is plug-and-play on the pre-LCI cars), only to then discover that my PSDZDATA file must be too old for the vehicle as it wouldn't expand the options! I'm sure that I will get there eventually however...

[@BimDoc]

Yes you will Good launcher is the answer. See my video about launcher comparison to choose suitable one.

[@jerryblaschke289]

Vladimir, I cannot find the list of parts we need and where we go to get the OEM LCI taillights.

[@BimDoc]

For all part numbers use ETK

[@clawhammer7]

where I can get your cheat sheet? do you mind sharing sir?

[@joker8541]

hello i havet stage 1.i start Flashing ECUs with E-sys to stock. turbocharger overboost now.maybe I something did mistake .sorry my English 🙈 😀 no very good 😕

[@BimDoc]

If you have any problem after flashing with stock files, it means smth is wrong with hardware.

[@hartm11petrucci]

So, I bougt the ENET cable and hooked it up, waited 30 seconds, then inserted through ethernet directly. Ethernet could not recognise/establish connection whatsover. Do I have to install ENET wondows drivers first? O, i have a BMW i3 2020

[@BimDoc]

No installation is required. Sometimes enet is faulty.

[@陳冠綸-m1t]

Hi Vladimir, if I want to code an ecu to factory setting, can I just click the ecu and hit “code”?? For example: press BDC body and hit code? Is there anything else that needs attention?🙏

[@BimDoc]

Yes CODE will code the factory settings. It will erase all previously made FDL modifications. So be aware of that.

[@陳冠綸-m1t]

@@BimDoc Thank you ❤️

[@cipriro28]

hello I watched your KZbin videos on coding you do a good job at walking people thru it I have a 14 bmw x5 diesel F15 and looking at coding a 6WA cluster is there a place where I can find a cheat sheet on how to do it myself if you can help I'd appreciate it

[@BimDoc]

See same esys manual part 2 to got the answer 😉

[@brandonpinette5036]

What can i update my 2011 x3 35i to in regards to the radio screen and head unit to get navigation and Sirius and might as well add car play

[@BimDoc]

Not everything is software related. Another hardware is needed

[@nepster-forever]

Дякую тобі друже. Дуже корисно

[@BimDoc]

А пожалуйста ☺️

[@eduardkleichnet3930]

Hi Vladimir, I know you said not to ask about the softwares, where you are getting them, but it would be helpful to post where can I contact Token master (the right one) because there are so many of them that some pf them pretend to be the right one, Many of them are scammers. its just to avoid getting the wrong one. Much Appreciated.

[@BimDoc]

This is official Token Mater website. All others are fakes! www.fxxtokenmaster.com/

[@DeviLftKillEr]

Hello, i have a little question, i tried to connect to esys but at connection via vin there says no zgw availabe and if i connect with icom there says read fa failed! There is no FA stored in the VCM… What causes this problem? Would be very happy if someone can help

[@BimDoc]

Sometimes it can happen that no FA can be read out. You need to force write it into the car and then you will be good. Doable remotely as well.

[@RusmirKahriman]

Hello Can I use that enet cable for BMW, for example? for mercedes with xentry software or vw group with odis software?

[@BimDoc]

Different brands have different solutions (obd pinout)

[@RusmirKahriman]

@@BimDoc which one would you suggest I use for mercedes and which one for the vw group

[@TONY63557]

Hello Vladimir, i have a 2011 750li. My connect icon is not highlighted at the bottom right even after I choose connect via vin. What might be the cause for that?

[@BimDoc]

Hi, Then you are doing smth wrong. For example do you have databases installed?

[@TONY63557]

@@BimDoc I think so, I downloaded one of the software programs off of KZbin

[@daliusstoncius]

Hi, very informative video, looking to start using esys for my self. Can i ask you what model laptop you using? looks very handy . mine is to big and to slow, so looking to upgrade.

[@BimDoc]

I’m using ASUS ZEN book There are no special requirements. Minimum what I can recommend is 1TB SSD All other parameters are not so important for bmw coding (win10 is preferred)

[@Alexandar730]

Hi, Vladimir. You have done great job with activation of my CarPlay and unlocked my satnav maps update. Thanks for that, again. Is there a way to get this excel cheat sheet for G30, which you shown in this video? 😊

[@BimDoc]

Sorry, but I’m not sharing my documentation )

[@Alexandar730]

@@BimDocThanks for the answer, I thought this will be the case but is worth it to try 😁.

[@cirilknez1715]

Good leson ,i need them right now. After key programing (with autel im608 , on desk ) after reading eeprom and coding file ok , then BDC module stop respond , autel say , cant not identify wich file need to be writen. You think ,with Esys will wake up and program BDC again?? X1-2016 help me please !!!

[@BimDoc]

Yes it might help. If you bootloader is still present

[@marban-f1o]

YOU KNOW IF POSIBLE TO CODE ACTIVE HYBRID 7 2011 , AND WHAT MODULE ACCESS THE HYBRID BATTERY TIMER RESET?

[@BimDoc]

Reset is possible but not remotely.

[@jaymilli9483]

Hello Vlad, I have a question, can I erase the ISN from a EGS and write the proper software to pair with vehicle on ista or esys? Also, is there a way to flash the whole car back to its stock natural state using esys or ista? I have ista 4.39 and esys 3,8plus and I am wondering since I have a 2013 550i xdrive in my garage that just had a transmission swap but never had the EGS programmed to the car. Do you have a step by step guide on how to do the above? thank you brother

[@BimDoc]

You can revert to stock via esys You cannot revert ease ISN in EGS with plain esys Other tool or special esys is needed

[@jaymilli9483]

@@BimDoc thank you brother I was able to flash it back to stock thanks to your video

[@wielensw]

For f31 2018 id6 the launcher 2.8 seems not to be usable anymore. Which launcher do you recommend?

[@BimDoc]

In-Depth Comparison of Every E-Sys Coding Launcher with Professional Experience Insights kzbin.info/www/bejne/imiulIWQrLOZkMk

[@のののののの-f1x]

Nice to meet you I would like to install the original front and side view cameras on my BMW F06 640i Gran Coupe. Coding is required after installation, but if VO coding is done, can each camera be used independently? In order to use the around view camera, is it possible to use it without performing VO coding separately in addition to the coding associated with installation? Any other coding required?

[@BimDoc]

Yes you can FDL code every single parameter if you know those. But VO coding is faster (if you have retrofits done, then it might be an issue)

[@christurner884]

When you read the VO (16.13 min in) it shows the Vehicle Profile on the right hand screen and Active in green next to to the FA folder on the left hand screen. Neither of these are visible when i read my VO? I can expand the FA folder and see all the information (and edit it) but not sure why i do not see active next to the FA and the Profile information?

[@BimDoc]

Right click on FA and press calculate FP

[@franklecock2648]

Hi Vladimir, thanks for the explanation. I VO coded my G21 a mont ago with option 430 for the mirrors, now I looked to my option list by Mdecoder, but I can't see the changes. My previous car, a F34 i also VO coded when i added the front PDC and after a few weeks i looked to the option list and there it was changed. Any idea what the reason is? I also changed the suspension from Msport to normal and I also want to change that in the VO. I know i have to add the code 225 (normal suspension) and delete 704 (M sport suspension) but how can I code that into the car ( code FEM or REM or something else? Thanks.

[@BimDoc]

Formation for Mdecoder and similar is taken from bmw servers not from your car. So while your car is offline then you can do what ever you want there, no changes on bmw will appear. But if you visit bmw dealer then some behind the scene magic happens.

[@PhilippeVINCENT-s1n]

Hi Vladimir, Thanks a lot for your very interesting and clear videos. In the E-Sys version I use (3.30.1 + E-Sys Launcher PRO 2.8.1), I need to activate FA. Is it normal ? What E-Sys version should I use to be up to date ?

[@BimDoc]

Yes it’s normal for esys 3.30 Newer versions activate FA automatically

[@baselmatossian2027]

Hi Vladimir, can you upload this excel sheet to be available for all till your website get ready please ?

[@BimDoc]

Website was avaliable. But not any more.

[@baselmatossian2027]

So please can you help me with my F46 ? @@BimDoc

[@fatwamuhammad7645]

hello, I have an error in using the software, can you help?

[@GTS-Tuning]

Instead of having the car running can you just hook up a battery maintainer/charger whilst coding?

[@BimDoc]

Maintainer will not deliver enough power to supply all ECUs. Proper power supply is needed in that case (same as in using in ALPINA gearbox software flashing video)

[@crispenthunder9773]

Thank you! Excellent video, keep up the good work! waiting for the website....

[@BimDoc]

Enjoy!

[@deejayDecibel1]

Hi. I have an BMW F10 520d FL can you send me lines for coding steering wheel? The old one was standard steering wheel and now I installed m sport steering wheel with paddle and the paddle is not working yet. Thank you! You are a star! 🌟

[@BimDoc]

Hi, Add 2TB (sport tranny) and VO code EGS, SZL, KOMBI, ICM

[@deejayDecibel1]

@@BimDocworking! Thank you very much!

[@10malabdullah10]

really easy to understand, Thank you for all your work

[@BimDoc]

Glad to hear that!

[@HmSytk]

Can the VIN code of the ECU changed by the same method be programmed? Or are additional tools needed?

[@BimDoc]

In majority of ECUs it can be changed via CODING But not in KOMBI or CAS for example.

[@tiagoalmeida2714]

Hello, I did some coding on the BMW control unit, it was reprogrammed, I noticed that the car seems more stuck, the movement is not the same and is it possible to have changed something? coding was done at FEM and DDE, thank you for your reply, thank you

[@BimDoc]

Recode to factory values FEM and DDE and it should be okay )

[@tonyny708]

Can you do a video on how to code headlight modules?

[@BimDoc]

In exactly the same way as any other ecu.

[@Gehtdichnichtsan583]

Do you always have those transitions? If not isnit because of the launcher, old psdz files or old esys?

[@BimDoc]

Most likely it is an error of the launcher