BMW Digital Cluster ( new version)

This is the New Version Review
dxtuning.com/p...

[@myfrankfurt]

Just to keep that topic up 🙂 Has there been any other updates recently? ODO is NOT transmitted back to car systems (2004 E60). So all error codes have the wrong mileage (either a fixed 100km/miles or mileage from OEM cluster when it was removed). Also battery registration will be done with wrong mileage. When removing cluster, car still has same mileage as when OEM was removed. I have some issues now with German bi-annual car check (TÜV). I had to put in old cluster for checkup and now my car has 2k km less than original (I put digital in in February with 219k km....). Now car has 221k km...but with old cluster the OEM cluster and all car systems show 219k km....

[@e60_guy40]

This can’t be sort out because OEM cluster directly talks to ECU and CAS , while digital cluster is standalone has its own mileage , just like your android head unit ( standalone) so whenever your put your OEM cluster back it will show you the original mileage you have done on OEM cluster. Battery registration you can do it normally because it will not see cluster mileage it will see your CAS or LM mileage.

[@dieselfr1975]

i have taken at least 6 updates for my Cluster! i don't have correct temperature display (on the info says 90 celsius and on the icon on the right shows the first line about 40celsius) I also can not stop the 120km warning and i have select the OFF option. Also since i put the cluster the warnings like brake pads can not be reseted (i had to reconect the old genuine cluster) and does not show to the center console the service faults or times for the services! (When you reconect the genuine cluster everything comes back) I have been verry tired with this cluster and there is no direct communication with the manufacturer or a programmer and from the shop i bought it they stoped answering my emails

[@e60_guy40]

I always give full customer support i sold a lot without any problems, maybe they gave you the defective one.

[@brotherinarms6666]

Hi I had the same fault. I’m guessing you have CIC system. If so look in the vehicle settings as the cluster turns it on there. Any other info get in touch.

[@dieselfr1975]

@@brotherinarms6666 i have selected this warning to be off from the cars settings and still beeps! Also in the cars settings i don't have the info for the services (when i put the old cluster everything comes back) and finally when i put obd to diagnose i have several communication faults because of the cluster

[@brotherinarms6666]

@@dieselfr1975 the other option that I also done until I fixed it was to set the speed to 300kph then it won’t chime lol.

[@brotherinarms6666]

@@dieselfr1975 you need to write down the info for the servicing and transfer it across

[@myfrankfurt]

I got an update from my reseller and now correct mileage is shown in BMW INPA. It seems fixed.

[@jokerul111]

How you fix it. You got an update?

[@myfrankfurt]

@@jokerul111 Yes, got an update file. Now mileage is correct in all BMW systems plus all Battery info fields and all error codes. Also KOMBI doesn't show anymore error codes in INPA.

[@myfrankfurt]

@@jokerul111 drive.google.com/file/d/1xrMeSQK0Wn2V-mNEQm22tb8Hj4RIVD6M/view?usp=drive_link

[@jokerul111]

@@myfrankfurt where u got that update from?

[@e60_guy40]

It’s not gonna work , KOMBI will still gonna show Red on ISTA

[@codrin2020]

Hello friend, I got finally this cluster, however, the fuel range in the left bottom corner fluctues and now it shows 160km left, after couple of seconds goes to 130km, then again goes up to 150km. Do you know how can I get this fixed? Thanks

[@e60_guy40]

This cluster depends upon your fuel tank live data 📈 not from ECU so it fluctuates but when you do little long drive it will adjust itself

[@Andre-nc4hs]

the big problem is that cruise control stops working with this panel

[@e60_guy40]

Nope , the cluster we developed no any problems with cruise control , did you order from website? Because we don’t sell our clusters to aliexpress or alibaba , we develop and sell our own

[@onurkizilkaya2038]

Bonjour j'ai une bmw f36 serie 4 j'ai installé l'écran mes mon régulateur de vitesse ne fonctionne pas comment je pourrais faire tu peut m'aider s'il te plaît merci d'avance et je m'abonne a ta chaîne

[@e60_guy40]

I don’t know you bought who’s cluster the cluster we sell are plug n play no need coding or any kind of modifications and also cruise control works even active cruise control works ( if your car is equipped with )

[@e60_guy40]

Better you ask your seller he can help you because it’s not software problem it’s hardware or data 📈 problem.

[@theunambiguous]

Odometer is wrong once fitted to my car, OEM reads 75,000, now new cluster reads 63,000 does anyone know of a fix?

[@e60_guy40]

You can manually adjust the odo , factory settings passcode 0168

[@SycaShow]

You guys have to realize there’s 4 different computers in bmw . CCC, CIC, NBT, and NBT EVO. Get the correct one

[@e60_guy40]

In E60 CCC and CIC only , in F10 CIC NBT NBT EVO

[@markwins22]

Hi just fitted this to my e90 everything works fine apart from when I open the door it shows me the opposite door example open driver door the display shows passenger door. I’ve been through the settings 100 times and I can’t forget this out. Any help would be much appreciated.

[@e60_guy40]

Your car RHD or LHD ? You need select in settings for RHD if your car is RHD

[@harvesterofsouls5320]

@@e60_guy40 and how can you do that I have the same problem

[@andreicalin3666]

Hello, I bought one but for bmw f30. But it doesn t show me the picture of bmw f30. Doesn t show any picture and also I don t have M badge. What should I do? Please reply to me

[@e60_guy40]

Ask your seller for file

[@senseiazul8168]

Does this work on the e46? The only cluster available is $1000

[@e60_guy40]

No it will not work on e46 because e46 uses Kline to communicate not CAN line

[@octavianmihaescu7314]

Hello! You can also reset the oil change, the service interval.... with this display, the one on the car has a button on the left side with which you can access the hidden menu? Thank you!

[@e60_guy40]

Yes you can directly through cluster as long as you you have Pre LCI e60 , for LCI E60 you also can but need some setting before installing

[@kostisuk]

@@e60_guy40 what setting is needed in Lci ? Thank you

[@kostisuk]

is it possible to downgrade into previous version ? It no longer shows photo of car when opening the door.

[@e60_guy40]

Can’t downgrade , the whole protocol is changed not only software

[@easyclap5189]

Is this also aviable for Diesel cars to 6000mph?

[@HRaychin]

when u change to digital cluster does it resets service settings?

[@e60_guy40]

Depends, if your car is CCC then no problem, if CIC then may reset

[@texasconnectedxcel2047]

Can you change it from km/h to MPH?

[@e60_guy40]

Yup can change

[@duyanhha8060]

Did the update . But when turning off the motor , the screen suddenly turns black . How can I fix it ?

[@e60_guy40]

That’s normal because Cluster works with ACC

[@Tujgdxv]

Does anyone know if the digital odometer, Car Play screen and aftermarket steering wheel all work for right-hand drive models please?

[@e60_guy40]

On BMW clusters no carplay ( screen mirror option) only on our VW and AUDi clusters , yes after market steering wheel ( M Performance ) will work on this cluster

[@e60_guy40]

Also RHD ( Right Hand Drive ) no problem

[@dappa311]

Hey I'm looking for the F16 pic for my BMW X6 , how do I get that file?

[@e60_guy40]

You can ask your seller they have

[@BadBoy-xz6zb]

Hej bro! I see many same on Aliexpress but with different prices, is there a good or a bad version of this?

[@e60_guy40]

There are three types of aliexpress is mess , cheap one have expensive have , not same product not same manufacturer

[@ElroyT]

I don't have the progressive theme. I have an f30 is there a new update?

[@e60_guy40]

Then you cluster is not our one , our cluster from 2019 to till today comes with progressive theme , did you order from our website ? Because our clusters are not on sale on aliexpress or alibaba , we develop and sell by our own. No other third party sellers involved

[@wdchaconpereira]

If there is an update... please share the file so we can update our cluster

[@e60_guy40]

Update files you can ask from your seller.

[@e60_guy40]

@@XX-gw7hg there is another video of driving test you didn’t watch my channel it means 🤣

[@e60_guy40]

We are e60 family

[@pubghits7728]

Hi Brother, Thanks for sharing his, do you know if they have this kind of digital cluster for 2013 bmw 328i (RHD)

[@e60_guy40]

Here you go for RHD dxtuning.com/products/for-bmw-13-17-f30-f31-f34-1-to-7-lcd-cluster-no-hud-compatible

[@forbitel5906]

Does the HUD still show the navigation guidance?

[@e60_guy40]

No I don’t think so

[@itzzvynzzz3678]

Once installed does the fuel tank value etc all update automatically..and also can you answer calls or even change songs using steering wheel controls?.

[@e60_guy40]

Nope can’t see call information or media , but fuel tanks level no problem

[@codrin2020]

Great video my friend👍 I have a manual gearbox, do you know how to remove P, and have correct gears showing on the deashboard? Thanks

[@markwins22]

Yes just enter 0181 then click ok the P will go that’s manual

[@codrin2020]

Many thanks my friend👍

[@e60_guy40]

You can hide the P but you can not get the gears display

[@codrin2020]

​@@e60_guy40Many thanks for the reply❤ Also, do you know, if I am reseting the service values (oil, filter etc) from the cluster, the reset will show also in the CCC idrive service menu? Thanks

[@e60_guy40]

@@codrin2020 yes it will automatically reset , but only those which are in your idrive , extra ones will only reset on your cluster

[@georgeallexandrov3457]

does this e60 mileage also apply to the e70 or is there a difference in size and connection

[@e60_guy40]

Difference in size as well as protocol dxtuning.com/products/digital-lcd-cluster-for-bmw-e70-e71-pre-lci-lci-2007-2013

[@로꼬-g1s]

Is the fuel gauge measured correctly? Mine changes every time I ride it, so it's not accurate

[@e60_guy40]

How does it change? I sold a lot of clusters no fuel gauge problem including mine one

[@Perroncino]

Same problem. Is there any way to factory reset?

[@e60_guy40]

@@Perroncino there is button on cluster hosing

[@Perroncino]

@@e60_guy40 it did not solve the problem :(

[@e60_guy40]

@@Perroncino what problem you are facing?

[@maxschmidt6436]

My fuel gauge always shows something different, sometimes it fluctuates extremely back and forth and the mileage range is not correct either. I have an E90 316d. What can I do to make it work properly?

[@BENNY-xx2fv]

Stesso problema Hai risolto?

[@e60_guy40]

New updates will solve it

[@ACE-hr8he]

Do you have the newest updates to upload onto the cluster

[@e60_guy40]

Nope now not working on this cluster , because of people compare it to ali express one and also people buy from ali express and ask me for updates and two customers cluster goes bad after update because their ones bought from ali express not directly from me so it’s a risk . So I stopped working on this cluster. Only if you order from me will get all updates.

[@lazaritovelazquez6364]

HOLA HELLO, HOW DO YOU DO THE VEHICLE SERVICE RESETS NOW?

[@e60_guy40]

From information menu you can reset

[@GregDelfeld]

Can you mirror map from headunit like VW cluster?

[@e60_guy40]

Nope on BMWs can’t

[@zuloo91king84]

I don't have a picture of a car, what can I do?

[@e60_guy40]

In system settings factory ( code 0168 ) i already replied there you will find cars

[@hosstheboss5020]

Thanks for the review. Can you brief us how to do software update?

[@e60_guy40]

Through USB port given with cluster, very easy to update it

[@siyabongamhlongo3275]

Ok but where to find the files

[@e60_guy40]

@@siyabongamhlongo3275 your seller

[@louispang7075]

Can u kindly share the update file?

[@e60_guy40]

You can ask the seller of your cluster, they have because now the files are not generic , old clusters you can update as you want , but new versions are different. But the process of updating is same. Only the protocols are different now

[@gentiansadiku2363]

Hey i have exactly the same to my e60 i wanted to know if you can help me, do you know if i can code it to a manual and change the rpms and the max speed bc it says 330km and 8000rpms and my car is a disel bmw 525d and only have 5000 rpms and 260 max speed

[@e60_guy40]

Manual you can change i believe, but can’t change the rpm and speed

[@magallon138]

Support HUD?

[@e60_guy40]

Yup E60 supports HUD

[@byertaju7610]

Tengo el mismo problema con el combustible, tengo un bmw serie 4 f32 y no marca bien el combustible nose que configuracion avra que poner para que funcione bien

[@maxschmidt6436]

Have the same Problem

[@e60_guy40]

I think need update it

[@donflock2576]

How can I reset my cluster? I can’t switch through the menu with my button

[@e60_guy40]

There is one small button under the cluster casing

[@myfrankfurt]

I have this cluster. It reports the km wrongly to the car. My car now has 100km in other systems and original odo is ONLY in the cluster. If you register eg the battery, the car will put your battery with 100km in the system. You will see this with INPA and Ista. I contacted my seller if this will be fixed by update, no reply yet. This is for e60, but should be same issue for ALL BMW. Any idea if this will be fixed?

[@INAPVBG]

If you solve problem, please share it. Same situation with my e61 lci. When I reconnect original cluster, mileage is same as before I installed this cluster

[@myfrankfurt]

​@@INAPVBGI try to get in touch with some sellers & the producer because this is an issue that keeps people from buying it. But it is a great product! Once they release it is slowing down some sales, maybe they find a way to fix it. Let's see. For now I keep my old cluster in case I need it...

[@myfrankfurt]

@@INAPVBG @DX-Tuning 's feedback would be interesting because he seems to be in touch with the producers (Mekede/Navifly?).

[@INAPVBG]

@@myfrankfurt i bought from sz kianda, but they are not so responsive

[@myfrankfurt]

@@INAPVBG I contacted some suppliers and also Mekede/Navifly directly..But due to CNY they are all not so responsive right now 🙂

[@INAPVBG]

Hi. If I install this cluster in my E60 CIC, will it be possible to see service information in central display any more? Is there any errors for instrument cluster if I scan car in ISTA?

[@anthonyjohnson9710]

They needs answer your comment cause idk but I’m curious

[@e60_guy40]

Yes there will be error if scan from ISTA or any diagnostic tool and CiC services it will not show you only can reset from cluster directly

[@INAPVBG]

@@e60_guy40 Thanks. I installed today cluster, it looks amazing. Only problem is that my time and date resets every time I turn off car. It sets to 12:00 and 1.1.2022. What can be done to set time forever?

[@e60_guy40]

Never got this problem, maybe software update will make it ok

[@INAPVBG]

@@e60_guy40 Seller said that it is maybe some clock IC chip on the motherboard

[@matejmarusic5255]

Dude, why do you have 18.8L/100km .. what do you driving ? I want to buy 328i and you scered me now

[@e60_guy40]

Mine is big single turbo built engine 3.0T that’s why fuel is high , you can see my youtube profile picture ( the engine bay ) 🤣

[@matejmarusic5255]

So what’s the average for stock 328i?

[@dzonikg]

@@matejmarusic5255 I have 320i E93 and i awerage 15

[@dappa311]

Where do you get the firmware update for this cluster?

[@e60_guy40]

You can ask the seller for update files

[@MatheusHenrique065]

This cluster is plug in play?

[@e60_guy40]

Yes it’s plug n play

[@depakkumarmistry7051]

How did you configure the cluster to get the F10 car image to show. I have the same cluster but no car image is being displayed . Also can you please let me know what version you are using pls ?

[@e60_guy40]

Go to settings factory code 0168 then you can select cars

[@zuloo91king84]

I have the same problem...did you solve it?

[@e60_guy40]

@@zuloo91king84 in system settings factory code 0168 then you can select cars

[@depakkumarmistry7051]

Yes i got a software upgrade from supplier and then when going into factory settings i could seecall the car models and different colours

[@zuloo91king84]

Same problem

[@Trellef10msport]

Can you switch it to MPH/ degrees Fahrenheit and does it show the maps on the dash?

[@e60_guy40]

Yup can change MPH and temp , but will not show the NAV function in dash

[@v-v3210]

It doesn’t show maps and you also lose the function to change music from steering wheel

[@Trellef10msport]

@@v-v3210 thank you.

[@PETRAKOV1]

Can u upload new style theme's ?How and from where u can get them?

[@e60_guy40]

New theme you can directly ask your seller

[@trevborn7456]

Check oil levels possible?

[@e60_guy40]

If your E60 is LCI then yes can check

[@paulnickel2095]

Tempomat nicht funktioniert

[@e60_guy40]

The one i sell , working, you surely got from ali express . Don’t compare it with ali express one

[@ARMENIE38000]

Why its showing the P ? I have the same problem

[@e60_guy40]

P ?

[@ARMENIE38000]

Yes on the right side

[@ARMENIE38000]

And your cruise control is still working ?

[@e60_guy40]

Because car is in Park so it’s Shows P in Drive Mode it shows D

[@e60_guy40]

@@ARMENIE38000 yup cruise control works perfect

[@rafaelvasquez8807]

Can you share the file to update the Instrumental Cluster?

[@wdchaconpereira]

Did manage to get the file?

[@e60_guy40]

You can ask your seller for update file

[@jheanidrovo9881]

Will it fit a 2016 m6 ? And will it show the m6 logo in there ?

[@e60_guy40]

Can Be customize M logo and also can retain your OEM M Functions like M1 M2 buttons , custom order , you can add my whsapp [phone] i will show you some examples

[@Michaelrovm3]

​@e60_guy40 hello my friend. I want to install it to my e92 m3 but I would like to know if all the functions are working properly. M mode, the 11 programms of shifting etc. If you could answer it would be very helpful.

[@e60_guy40]

@@Michaelrovm3 yes can install but need to fetch the protocol, you can add my what’sapp [phone]

[@User-qu7pq]

Man i want this but the comments scared me away also will this display mph?

[@barryjackson4048]

You can change to mph just go to factory put in 0168 or 0169 and its in that option

[@e60_guy40]

Yes it shows

[@brotherinarms6666]

Can you change the speed as I have a 320d and the top speed and RPM are different.

[@e60_guy40]

Speed 200 mph ( 330 kph ) , rpm redline 8k but your car will not pass it to 6k I believe

[@brotherinarms6666]

@@e60_guy40 on the video it shows lower speed and RPM I just wondered if anyone has figured it out yet.

[@sprinter1313]

wo ist die 7 ?

[@e60_guy40]

7 series also can be selected

[@RamaOlama]

This Chinese Cluster doesn’t have Navigation HUD, any Speedlimit/Traffic/Sign Information and it probably doesn’t even has Radio/Music selection. For what the hell people buy this if half of the functions of a real 6WB cluster are missing?

[@e60_guy40]

Only because of look i guess because nav and everything you can use on head units like android head units

[@davesquaredkhan8955]

It's mainly for older bmws that didn't have digital dashes.

[@ebrimasonko7859]

Hi, why this clusters does not show your speed limid indicator no your dashboard

[@e60_guy40]

It has speed limits to 330 kph

[@Kufurbaz_haydo69]

g30 ?

[@e60_guy40]

Nope not for G30 , only E and F series

[@e60_guy40]

Only E and F series

[@Kufurbaz_haydo69]

@@e60_guy40 ok thx

[@asapdope6932]

Anyone here try to put it in a Bmw E36?

[@e60_guy40]

You can’t because E36 uses Kline communication not CanBus

[@RoyBling]

Latest Digital Cluster Car Image UPDATE for e9x, e6x, e7x, F10, and More kzbin.info/www/bejne/rp6TdnSXo9mBl68

[@e60_guy40]

Yup I created these pictures for these digital clusters

[@RoyBling]

thanks a lot @@e60_guy40

[@e60_guy40]

My pleasure 😇