BMW E36 320i electric exhaust cutout valve (M52B20)

If you want more videos subscribe ! you can leave a comment what do you want to see next ;)
My projects site on Facebook: / ryckosprojektai
Filmed with GoPro Hero 4 black.
IG: M52_B20

[@jorma4e]

Nice welding job you got there buddy 😂😂

[@M52B20]

Yeah, leaks everywhere, done by professional welders in Lithuania... 😂

[@Robert-bq9xh]

Ventilation man

[@kingguzman01]

jorma4e 😂😂😂 you going to hell for this

[@Shhhheesshhhhh]

Yea them holes you can tell are professionally done

[@carismaevo6560]

@@M52B20 nebūtų lietuviai🙄😂😂😂

[@Isaacskilling]

That bubble rumble sounds amazing

[@SIMULATION621_]

*When you love loud cars but live in a quiet neighbourhood..*

[@Tornado_MK6]

I’ve kept getting this in my recommendations and I’m not disappointed😂

[@M52B20]

Love to hear that! Be sure to stay with us and subscribe if you like my content, more videos of E36 and E30 coming soon! 😎

[@KossSX]

best welder i've ever seen

[@drbmwer7137]

It's a bad idea to make the exhust blows behind the fuel filter

[@HDiForever]

fuel filter in exhaust ?

[@M52B20]

No, fuel filter is near exhaust, but it doesent matter because all heat and fumes going straight to the ground not fuel filter covered with plastics

[@Chris-hw4mq]

Bigger problem is when you hit a bump and rip the exhaust off

[@mehmets.6124]

When u hit a bump, then u ll hear the sounds of exhaust very well

[@me8548]

Everyone a professional welder in the comments huh

[@M52B20]

Seems so ^^

[@alec-s]

I Am.....

[@LangitJiwa]

2:15 Pure Eargasm.

[@Reman1975]

Looks like it could now be the lowest point on the underside of the car. I'd be a bit worried about hitting it on something and ripping half the exhaust off. If it was fitted closer to the floor pan, had a slash cut bend on it to direct the gasses downward, and possibly had a skid plate protecting the valve body I'd be more enthusiastic about your mod........ Does sound good though.

[@Its-Metz]

2:14. amazing m52 sounds

[@mikser6666]

How to save your catalyst 101

[@M52B20]

Hell yeah

[@allradkarre2193]

No leak at all

[@mirtezansejdii6903]

Mersds emal

[@PuTRYErY]

@@M52B20 ុំកបលប។

[@Otomotor]

Good system kzbin.info

[@goodisnipr]

I'd wire it to the speedo and have it full open at 0 and full closed by 25mph. I love a growl at red lights but hate the droning at speed.

[@samueldias2093]

Nice welds

[@cristiancpk3206]

Hello, more videos with your E36 please. I m interesting. Keep up the good work

[@M52B20]

Thanks for the support! More videos coming soon!! BMW E30 project videos coming too!!!

[@maisumaqueda]

0:28 has that cracked cane sound, sounds like a ricer honda 1:39 still sounds like a ricer honda, but a straight piped one

[@patrides]

i feel bad for you if you can't differentiate an inline 6 sound to a inline 4 honda engine..

[@maisumaqueda]

@@patrides And I feel bad for you because of your condescending atitude and for not understanding my point. I can usually tell if a car has st3, st4, v5, st6, v6, v8, v10, .. But if you read the title this is a video about a exhaust cutout, not an engine review. To make it clear, I am talking about the ricer diy handmade exhaust (no offence to the owner). And don't get me wrong I like the m50's, prefer s50's but it's still good, but the exhaust was apparently welded by Lithuanian Stevie Wonder and Hellen Keller, it has that metalic rattling sound and is leaking air all over, thus sounds like a ricer honda, nothing to do with the engine mate

[@hanynowsky]

When the valve is fully open, does it improve engine performance a little bit?

[@M52B20]

Yes it does, depends if you running stock engine or tuned, if stock you actualy won't feel any diffrence but it does improve a little bit, if it's moded and tuned then you will feel it a lot more between stock exhaust and straight piped. And it actualy makes diffrence where you put your valve, I done mine before CAT. Oh and look up where your CO2 sensor is because you can actualy lose power if not done right.

[@hanynowsky]

@@M52B20 yes i am still stock. Intending to place just before the muffler.

[@martinkrotil2041]

Welding fail 😂😂😂😂

[@M52B20]

Welding was fixed long time ago

[@heavymetalturtle1990]

@@M52B20 will you do some "how to do" video?

[@M52B20]

@@heavymetalturtle1990 Will do overview and explain video to know how its done and how it works

[@corneliusbombardus1153]

did you make that the exit for one of the two exhaust pipes on the e36, or did you weld that on so the two pipes still lead out and that’s just another exit for a pipe? idk if that makes sense, but i’m trying to do this with mine and i’ve seen many different ways for it. also, how much was it to install? (not including the cutout part price)

[@CarLoverPhotography]

How can exaust leaks sound so good

[@alfiesolomons9666]

I do not know if its to reduce back pressure to the motor or its just another bad welding job.

[@M52B20]

It does not reduce back pressure, welding fixed long time ago.

[@arrenlambert8044]

Ah hello sir, just calling to let you know we found a pigeon in your welder

[@M52B20]

My welder is full of pigeons sir, It's the part of the vehicle

[@Kodigo919]

Where can I buy one ? If you did it, how did you do it ?

[@lukaleskovsek5494]

nice holes in the welds for more sporty sound

[@M52B20]

Yup 👌

[@lukaleskovsek5494]

Do you still have that car

[@M52B20]

@@lukaleskovsek5494 not anymore

[@PvTLink234]

The point is to control when you want to be loud? And how loud?

[@M52B20]

Pretty much yeah

[@КрисХристов-к8э]

AMAZING! I want to have a car like this someday...

[@bboytyby]

I need to know if you feel a better acceleration with valve open or just noise?

[@M52B20]

When ECU is tuned it has more acceleration, and it sounds better too

[@louis_pons]

Is it a custom exhaust ?

[@startepower]

Great job! Sound's Good! Sound's Great! Sound's Amazing 👍👍👍

[@Mith29]

One speed bump, ripped right off

[@M52B20]

Wrong

[@TheCarLovingSwede]

It sounds like something is rattling when it's closed. When it's open it sounds great though :)

[@vronik3271]

nice chain rattle :D

[@teejetronic]

1:03 Is there any electrical leakage from the harness to the fuel pipe?

[@M52B20]

No.

[@Wanorjat]

Nicely done ... But , egt vs fuel pipes ,bad solution on this case.

[@M52B20]

Thanks! I driven E36 with this mod about 1 year now, nothing bad happend, because it doesen't get that hot to ignite fuel and not much heat reaches fuel lines or fuel pump, even on very hot summer days. (Tested with laser termometer) If you want to see how did valve hold up after 1 year be sure to subscribe and don't miss out ;)

[@bmwe36c]

Let em al talk.nice sound buddy

[@Жук-е6в]

У меня так было когда глушитель нафиг отвалился по шву)))

[@jamesrobinson1579]

Imagine the difference in sound if there wasn't a gaping hole right after the cutout valve already! LOL.

[@mati414]

Wow how is it made?

[@battleforfairlife7834]

well done 👍🏼 m! how much HP ??

[@ambuyat69]

I'm planning on doing this to my car, but if I put back my stock muffler but with removed resonator, it will still sound stock/quiet right?

[@M52B20]

Yes it will sound stock

[@thebutta2724]

The neigbours are now happy again ,its not more so loud 😂

[@bawanj6577]

Hey bro i would like to know if it slowers your car or not i really need some clean answers im considering to do it and i need some answers please brother!

[@mrpoopybutthole6314]

bawan J. No it won’t make your car any slower, there’s no reason for it to. There may be a low end torque loss but it will be un-noticeable. You may pick up some top end power, again may be un-noticeable.

[@bawanj6577]

Mr Poopy Butthole for the low end torque i think it would be the same if u like raced the car with the valve closed right like you didnt made any modifications

[@mrpoopybutthole6314]

bawan J correct but hell I ran my car with open headers for a bit, screamed at the top. Once I put the exhaust back on I noticed a minuscule amount of low end torque. But hell could have been a placebo.

[@axtech24core]

So it's basically a leaking exhaust?

[@Niglo2Mort]

C'est un aveugle qui a fait les soudures??

[@LEVUCARCHANNEL]

âm thanh tiếng pô điện xe BMW E36 320i rất mê hoặc ,cảm ơn bạn chia sẻ

[@on30sg]

Stary złom i kierowca bez muzgu!

[@RobertYayo]

Doesn't the Ford Mustang GT's already got this?

[@M52B20]

Actualy a lot of new cars already have this from the factory, better made ofc

[@RobertYayo]

@@M52B20 What other cars have an active exhaust?

[@M52B20]

@@RobertYayo Mercedes AMG, BMW m sport etc.

[@RobertYayo]

@@M52B20 Understood. Ford did it better.

[@stevenbode6694]

Is die tüv zulässig in Deutschland??

[@MultiLuc28]

What setup is the exhaust system? It has a nice rasp and pops and bangs. Is it deacatted, or just the muffler and valve, straight pipe,..?

[@M52B20]

just valve and pipe = straight pipe, my valve is before the catt

[@Qkwin]

The sound is from the welding

[@khrprod]

why you need cut out if it sounds like fart can anyways?+

[@otto2424]

I dunno a lot about cars so what is this and why?

[@Anas_khumsi]

this is my type of music for me

[@أخرضهور-د8ج]

قبل ماشوف هل اختراع كنت افكر بواحد بنفس النضام والله

[@moneymaker178]

there is no risk that some stone will enter?

[@M52B20]

Nope

[@ValisCZ]

Where I buy that? 😀

[@M52B20]

You can find similar valves on ebay just search for "electric exhaust cutout valve"

[@m.p.performance1976]

Its only for sound. When you open the valve all the compresion is gone. Its not turbo car.

[@M52B20]

Actually if you tune ECU you get more acceleration. Its not 2 stroke engine

[@Do6po3JIoDe9ITeJIb]

Сразу видно,быстрее ездить начала...)

[@B0st0nftw]

Did Helen Keller weld that cutout on there holy shit >.

[@M52B20]

What is it with you americans and Helen Keller ^^

[@jimmieakesson5439]

Is it worth it. Does it still work

[@M52B20]

For me motor lasted 1 year, maybe i just got bad one, there are other valves maybe better.

[@conankusanagi]

Where did you get this valve? :D

[@M52B20]

From local shop, you can find similar valves on ebay if you search for "electric exhaust cutout valve"

[@l3g1o0on9]

I dont hear a difference perhaps its from the mic or the fact that we are listening to an engine as big as a Coke bottle :D And why am I subscribed to this when I have never even watched a single video this guy has wtf

[@patrykrog8121]

you sure you dont hear the difference? there is a big difference

[@davud6097]

M52B25?

[@stvpls]

amazing fly bys

[@lemakosle]

Κάπως έτσι δούλευε το exup στο fzr Yamaha.

[@spongelopez9713]

Good luck on any speed bump higher than 2".

[@-KOITO-]

I love car but i also love my neighborhood 😭

[@1026timey]

Not a big bmw guy, but is it me or does this engine have a lot of backfire

[@M52B20]

Indeed it does

[@YTJensengaming]

Wow nice 👍

[@Igor_Rubtsov]

Ужас,с закрытой заслонкой звук будто алюминиевые банки дребезжат,а с открытой заслонкой,звучит как Жигули.. без обид

[@macak3140]

damn boi that is genius

[@passion4899]

sounds much more like a race car

[@milanchathuranga8654]

What is the use of it ? Can anyone explain that?

[@justinc1790]

Bist for fun

[@M52B20]

If you tune your car after installing that you can get little bit more acceleration, but for most part for now it's just for the sound. Would make huge diffrence on turbo car though

[@milanchathuranga8654]

@@M52B20 ok. Now I got the idea. Thank you

[@M52B20]

@@milanchathuranga8654 No problem, have a good day mate 😊

[@eliazn9809]

where did you buy that exhaust?

[@M52B20]

Exhaust is stock, I just welded electric valve to my exhaust, you can get one at ebay: www.ebay.com/itm/2-5-Electric-Exhaust-Downpipe-Cutout-E-Cut-Out-Valve-CONTROLLER-REMOTE-KIT-NEW/172884861153?hash=item2840bda0e1:g:US4AAOSwNJNbMLLa

[@M52B20]

You can find there right valve for your car

[@eliazn9809]

@@M52B20 Thank you :)

[@Preyser123]

Greetings from South Africa. This sounds quite sporty for stock, even with the valve closed for the exhaust to be in stock form. Great car though. We have a 2011 Ford Figo 1.4 petrol (this is based on the 2002-2008 Fiesta) and the exhaust, I'm assuming it is stock, sounds a bit like this, throaty and sporty. I've always believed that stock exhausts just give off a quiet but deep hum. The 320i E36 is one of my favourites. I haven't come across one here in Cape Town yet but I know they are out there.

[@hectorzuik3448]

@@Preyser123I have one, and I'm also in cape town, which sounds even better, I have e36 328i branches on mine with a 50mm duel exhaust into a single 60mm to the aftermarket sport box

[@cxdeine3743]

That weld job tho lol

[@M52B20]

If you look at the other comments you will see same comment as yours and answer about the welds in it :)

[@MRoh79]

exhaust number Two was heating the Water again

[@M52B20]

What water LOL ^^

[@phoenixlounge7656]

Only takes 1 huge speed bump and that's gone LOL

[@M52B20]

Drove this car for one year with that mod, and its still fine. Lots of speed bumps and nothing is gone

[@pauloesteves4804]

So its basically an exhaust leak on demand

[@M52B20]

Yup

[@frankmiki629]

Valve closed 👍

[@piziredza1112]

Omg 1:15 🔥🔥🔥

[@memezboi2226]

Kinda sounded like a Detroit diesel engine for a sec

[@davidebosi828]

That welds doe

[@telk892]

Tundub et see klapp maksab rohkem, kui see auto😀

[@johndean406]

Is it designed to sound like shit all time or just while it’s running?

[@Teamdevil27]

Its controllable from a button. You can drive silently and you can drive loudly.

[@Nikoooo9]

+400hp ?

[@M52B20]

Not even close, 2500HP+

[@Jay_fotography]

I need that for my toyota tercel 😂😂😂😂😂

[@allradkarre2193]

I like the idle

[@TamerlanAhmedov]

2:36 like M52 E39

[@f3.769]

❓

[@ΤάκηςΣαμαντας]

How much please

[@yuzeiryyusuf]

if there is hot exhaust flame fires to the ground then bounce back to the car: that white connector will get burned. if there no flame from the exhaust > it is ricer car.

[@yasineren3131]

GÜZEL TEKNOLOJİ !!!

[@xvwrg8879]

nice leaking

[@M52B20]

Welds were fixed long time ago, be sure to sub and see how it looks after 1 year daily use! :)

[@bujie5500]

I think you lost benzin, you just look at the 1:33

[@M52B20]

That's just moisture, not fuel ;)

[@dennisschulz4288]

Professional welding 😅😂😅😂😅😂😅

[@TheCEDZIOR]

Amazing :O

[@yousufmusthaneer9738]

I need this exhaust!!!!

[@P61guy61]

Sounds like a Honda Accord with a bad muffler.

[@Drivin_Vibing]

Nothing but rasp when its closed

[@kevinz3057]

Welds failed.....hot gaz in front of fuel filtre !!! Nice job ......for barbecue bmw 🤓

[@محمدشجاعالدين-و4ص]

Name this pies ...?