Got this replica gt2 wing on ebay. It was made in Poland. I briefly go over what it takes to install. A few instrumentals I enjoy are included as well. I hope this can help someone out. Thanks for watching.
Пікірлер: 62
@placeholdername32062 жыл бұрын
Yo dude, appreciate the video. I'm gonna install mine like this. I actually got mine painted before i did any installation. Not sure if that was a bad idea
@dillonaron142 жыл бұрын
Thanks man good luck on the install
@taylorcepin4698 Жыл бұрын
SWEET!
@borundangas5 жыл бұрын
Aaron at minute 8 clearly shows a big spyder on the top shelf of the cabinets, did you see it.... But about the video pretty good my friend.
@upc.barcodes832 жыл бұрын
Great Vid. Thank you
@jessicaxaisongkham87413 жыл бұрын
how is the spoiler holding up now are you going to do an updated video?
@dillonaron143 жыл бұрын
It's holding up great . Sure I can do one.
@papayawnn10384 жыл бұрын
Wassup man what kind of foam did you apply? And update on the sag? I got a ebay wing as well
@dillonaron144 жыл бұрын
No sag yet. And yellow foam in a can from Lowes. I think it's called great stuff.
@Astewthemayor Жыл бұрын
We want more car videos!!!
@troika1014 жыл бұрын
I bought this to from Poland but it was a fixed high vert. So I cut it from the risers and filled with more fiber glass then sanded and taped for the holes.
@joeys35805 жыл бұрын
Thanks for making this - are you happy with it overall?
@dillonaron145 жыл бұрын
Yeah for 250 dollars it's great and has not started sagging like you hear about. I took it off recently to get it painted.
@chameleon3413 жыл бұрын
Do you know if the ltw replica exists for the e46?
@Goldenboy-kd8zk11 ай бұрын
What tool did you use to assemble it? I can’t get any screwdriver to do it.
@dillonaron1411 ай бұрын
I ended up getting long threaded studs to put in the risers so I could use a nut. Check my updated ltw video.
@spyrop56964 жыл бұрын
Do you have a link for it? There’s a few on eBay I’d like the same as yours
Who knew young snow wouldn't melt in the summer that's true
@araboharabedian3 жыл бұрын
Man I’m worried about that expanding foam closing up the holes for the bolts. We’re you thinking about applying too much of that stuff that it could break the wing from expanding ?
@dillonaron143 жыл бұрын
Held up just fine since I made this video. Even filled the risers and the base since then.
@araboharabedian3 жыл бұрын
@@dillonaron14 interesting….what made you go back and want to do those pieces too
@dillonaron143 жыл бұрын
@@araboharabedian to seal them off. They would collect water when it rained. And also to add a little weight to the piece
@grvyrdgang56723 жыл бұрын
How did you exactly put foam in the wing ? And risers ?
@dillonaron143 жыл бұрын
Hey man, the 'great stuff brand foam come with a straw looking nozzle attachment. I simply drill a small hole at each end of the top spoiler where it meets the risers. Also I drill a small hole in the risers. Inject the foam through the small holes and tape over when you are done so it dosent expand out of the drilled holes and make a mess.
@jose36mtnez944 жыл бұрын
Hola, esta genial.. podria saber donde lo compraste para poder hacerlo yo..?? Tienes el enlace de la tienda ?? Gracias
@dillonaron144 жыл бұрын
Hola amigo, solo busca en Ebay ahi lo podras encontrar www.ebay.com/itm/254537754274
@seesig53195 жыл бұрын
And what are the bolt sizes you used
@dillonaron145 жыл бұрын
I'll have to double check just bought some new hardware the other day.
@dillonaron145 жыл бұрын
M6x1.0. 60 or 70mm for rear and 40mm for front and washers
@dillonaron145 жыл бұрын
Allen head
@seesig53195 жыл бұрын
Aron Dillon great man, if you don’t mind telling me what it needs to be mounted on because I bought it at the same place you did
@dillonaron145 жыл бұрын
@@seesig5319 also get shorter m6x1.0 for attaching risers to the top riser. Other than the hard ware, I laid 2 in wide blue painter's tap all across my trunk. After that I put the base of the spoiler on the trunk and set it even distance apart from both outer sides of trunk. I used addition tap to keep the base if the spoiler in place. I used a pencil to mark my drill spots. The pencil fit perfect though the holes so it made it easy. Use whatever you feel is right in your situation. Then I removed the spoiler and looked at my pencil marks. I started with a small drill bit to create my holes. Then I worked my way up to a 5/16 or 3/8 bit, I cant remember. Make the holes the right size for the hard ware.
@chaizperformance3 жыл бұрын
greetings from Mexico 🤙
@dillonaron143 жыл бұрын
Gracias
@papayawnn10384 жыл бұрын
Did the foam create bulges?
@dillonaron144 жыл бұрын
Nope
@idrisu15 жыл бұрын
what if you have a trunk with oem m3 spoiler
@dillonaron145 жыл бұрын
Hey man it's possible this spoiler cover those holes? It might be easier to get a different trunk to do this with
@seesig53195 жыл бұрын
How is it holding up until now, no sagging in the top middle? And is this duraflex?
@dillonaron145 жыл бұрын
No sagging and it's an ebay brand
@LateNightRituals4 жыл бұрын
U have the link ?
@dillonaron144 жыл бұрын
Its in the comments
@Sphyn0x4 жыл бұрын
Wheels?
@dillonaron144 жыл бұрын
Borbet type c
@il_gura4 жыл бұрын
Is it better to foam it inside?
@dillonaron144 жыл бұрын
Gives it weight and helps prevent sag
@il_gura4 жыл бұрын
So it can run the same even without with no problem. On my one it's gonna me more esthetic than functional
@dillonaron144 жыл бұрын
U can do it however you please. I did this bc all the other reps sag. But even without the foam people with this same wing saybit dosent sag
@BmwMe-uh9sy4 жыл бұрын
Link plz
@dillonaron144 жыл бұрын
Check the comments my g
@BmwMe-uh9sy4 жыл бұрын
Aron Dillon darn out of stock
@SunsetWingman4 жыл бұрын
Ordered one for my M too. I think you just have to bust out a little filler and do some sanding to make everything line up perfectly. I'm doing a vinyl wrap myself so I get by without having to go to the paint shop. I would have thought the foam would have expanded and caused the wing form to bulge in places.
@dillonaron144 жыл бұрын
Thanks for the reply. My friends dad the the work and painted it for me. You can see in one of my recent videos. And the foam worked pretty good no bulges at all.
@aubreyhinkson76833 жыл бұрын
Don't forget the drunk latch reinforcement bracket kzbin.info/www/bejne/rGSWZnhnj7iBotU time stamp 5:26