BMW E46 How To Fix P0741 Torque Converter Clutch Circuit Performance

Check out my video on how to install an upgrade pressure regulator to prevent this problem from happening in the first place:
• BMW E46 ZF 5HP19 Auto ...
You can buy a new torque converter here:
www.torqueconverter1.com/
www.transtar1.com/
Check out this great vid to see what the torque converter really looks like inside:
• Video
Check out my videos on how to remove and reinstall the transmission:
Remove: • BMW E46 Rear Main Seal...
Install: • BMW E46 Rear Main Seal...
This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

[@CarlosMartinez-kn9oj]

i owe you money because all the videos you make,I'm learning a lot from you and I'm making money. I have 3 kids and a wife but my bmw 328i 2000 is like another son of mine. I live in Seattle Washington and once a year we go on a vacation to California. I hope someday I can go to your shop because you are like a movie star for me.

[@50sKid]

Lol, thanks man

[@kylehamburgh309]

That’s all you got for my man carlos? Damn that’s cold

[@BunnyHairedKid]

Can't tell you how much I appreciate your videos! makes me happy to see other people appreciating them as well!

[@chaseledger547]

By chance I purchased the exact same model BMW as yours a few months ago. The gods have spared me thousands because of you! $$$

[@gmans7859]

Thank you for sharing. Yes sir, you are 100% spot on with this. A short time after buying our used E46 this happened to us. We were steered to a Specialized Transmission shop just outside Los Angeles. $2300 later all was perfect. At the time the car was a low mileage example but I still made it a point to replace the rear crankshaft seal, related gaskets, transmission mounts and some hardware when the transmission was removed and reinstalled. Money well spent.

[@wheatonna]

Bummer! Not the news I wanted to hear. But great info, thanks. The two-fans analogy is a good one.

[@hermit527]

I have this code on my '06 Corolla and I have looked countless times to find a true cause to this. Thanks to this video, I have finally been enlightened as to how this can occur. Thank you 50sKid!

[@KOFFEY619]

Hermit527 I just got to code on my 04 corolla did you fix it yourself and how did it turn out? Or did you have it professionally done?

[@humza1102]

Happened on my ‘08. How did you end up fixing it??

[@Blue-bi3pz]

Just got this on my 07 corolla. How’d yall end up fixing this lol

[@godfreymalema5368]

Hi 50Skit, I really really like your videos, you are my motivation, especially being yourself and not a fancy mechanic, lol. I am from South Africa, and I always watch your vids for educational purposes for my 2005 330ci e46. Keep it up man

[@marks2730]

How I wish you do tackle E46 SMG transmission too. Many are afraid of this kind of transmission. Thanks keep it on doing very informative videos.

[@TheCowgirlNiamh]

Well done on the pronunciation! :) Thanks so much for showing his picture lol he said "my eyes are watering but I'm so happy Mommy!" You made his day! Xxx

[@claudemorehead4529]

Thank you. You answered a lot of questions that I had about my problem.

[@IsmailRidi]

Awesome video man, I felt like you were talking to me because i had just asked that question a couple of days ago HAHA I will go ahead and upgrade the pressure regulator and maybe 1 day the torque converter

[@sergiochacon6520]

I had never worked on a beemer before but tnks to you're videos I'm doing my brothers trasmission torque and seal kit good videos and we'll explained thank you

[@jonathanpacleb8969]

Best explanation of operation of a torque converter.

[@crescentandstarglory]

Great channel. I learn a lot for my VW too.

[@CP-jh9fj]

You r very sympathic. keep on doing Videos Jason

[@JeremyRemele]

Hey @50sKid, would love for you to drop your 2 cents on this. My zf-5hp19, W8 Passat, showing the code, however it isn't slipping quite enough to reflect on the tachometer. Are you saying this kit could prevent further damage and keep the transmission alive or am I a goner? My specific code description says: P0741 Torque Converter Circuit Perfomance or Stuck Off Edit: Nevermind, my RPM's on the freeway going 80 are 3,000, time for a new torque converter.

[@naseemjafar4715]

Jason I have been watching your videos for quite some time. My BMW 503i 2001 is throwing P0741. I drove at 80MPH and the RPM is around 2700. Should I change the torque converter or just the pressure regulator valve. Also if the converter seal inside is worn out will it leaks the transmission oil? Thanks

[@israelcoleman4084]

You’re amazing man. Thank you!

[@lalogarciaa1966]

God bless you for all your lessons thank u .

[@michellewilliams3901]

Hi, I really enjoyed the Simplicity of how you explain things. My name is, Michelle, and I have a 2003 Cadillac DeVille DHS, and it just shuts off randomly. I took the car to my local O'Reilly's for them to put their scanner on there and the code PO741 came up. In fact, it was the only code that came up. Now, I was told, by several transmission shops, that to replace my torque converter, would be a waste of time, and if the damage had made it to my torque, then I need to buy a whole transmission. Please help😂

[@michaelpierce2131]

Thank you! Very helpful!

[@andreiput9492]

hello 50's kid, do you think this is the reason why in your recent vid about your transmission rear seal fix, that this is the source of the leak?

[@elijahhafley4297]

I recently bought a 2001 330i. Got this code. Kind of terrified now and been stressing hard. Besides that the car is in great condition. Thanks for the information! I’m hoping to diagnose this myself and it be on the minor repair side! 😢

[@vaqueritojr1]

Hey, thank you so much for the help! I have a quick question. I did the radiator x expansion fix but the car seems to overheat. I realized i didn't reconnect the cable by the lower radiator hose (not the sensor that connects to the radiator but the cables on top that seem to disconnect together) Please get back to me, thank you so much once again!

[@Handleitlol]

Hi 50s kid, p0741 code question. From my research if my car has this code the seal in the TC is slipping and I need a new TC right? I’m not doing the work so any help before taking to my mechanic would help...thanks!

[@CarlosMartinez-kn9oj]

I need help with my bmw, I need to know what is happening with my transmission, when I put it in drive everything is fine but when I put it in reverse sometimes it fails do I need to replace the whole transmission or is it some sensor that isn't working. last month I changed the transmission fluid I checked the level but the reverse still doesn't work sometimes, what do you recommend ?

[@juliobanderas5941]

thanks for all y0ur help

[@johnnyhernandez490]

Hello, I just had my 2003 BMW 530i with 204K diagnosed from getting the dreaded P0741 code. The shop told me to not bother putting any money into the car because it wasn't worth it. I never had the transmission fluid replaced because I didn't know. It's running good with the occasional slip, more like a hiccup and the RPM may hang at 3,000 at 80 mph; but, not all the time, rarely. I just put new tires, struts, tie rods, oil cover gasket and water pump. I would like to, at least, run the car for as long as I can to get my money's worth on the recent repairs. I have the kit to change the transmission fluid and bought the LUCAS additive, just in case it's not recommended to change the fluid. I was wondering if I should replace the transmission pressure regulator, install a new torque converter or just do the regulator and LUCAS additive or just add LUCAS additive alone. I hope that makes sense. Thanks for the awesome videos.

[@williemickbillie]

So mine will lock up like it’s suppose doing 80 but I get the interment code thrown, any thoughts? Like it’s for sure locking up (no blown seal)

[@camaro1972ah]

hi , just got the dreaded p0741 code -will do the pressure regulator change as you suggest asap. Car drives fine , 325i 2001 e46 , no hesitation . Only 2 issues are a small oil leak front of engine - will determine from where . And What I want to ask is , I also have a whine that goes up and down with the rpms "around" the transmission area.Could this indicate anything? possibly still the regulator valve? help.....!!!!

[@zayrembert5752]

Is it anyway I can ask you some questions about my e46

[@la_carprofitechcardoc2817]

Thank you so much, I just asked you week ago about it )))) You are awesome !!!!!

[@la_carprofitechcardoc2817]

On my BMW rpm jump around 2.4 and 2.0 when car have same speed. Like clutch try lock but can't. Thank you again. I know what to do.

[@jeepguy95]

I'm thinking of buying a 2002 330i with the M54B30 in it. The guy selling it describes it as "starting in a higher gear than it should, but once you get going, it seems fine". What could be the problem that he's describing? I know I'm being a bit vague here, but that's what he told me. The car is very cheap and I'm looking to buy, drive for a bit, and then resell. Any help would be appreciated! By the way, like your desk fan analogy. :)

[@masterbruce1546]

Ok so the cog light had disappeared for like a week then it appeared again and my service engine soon light came on and the code I got was p0734 gear 4 incorrect ratio. By any chance you know what can fix this? It says replace transmission control relay but I wanna ask you before I start doing unnecessary things.

[@jonathansanchez8482]

Do you know how many tcc solenoids a 2003 bmw 330ci has?

[@dfields9511]

Any ideas on P0744 on 2001 Nissan Maxima with Jatco RE4F04A transmission (at least it is not CVT) Fluid was very dark so I changed it twice (doing a 3 drain-fill to do a flush). Miles: 205K it was shifting at 4K rpm on all gears and delayed engagement. Drain-Fill 1 ; fluid very dark/black brown, didn't smell bad or have metal flakes 1 gal out , IN 3 qts (Valvoline MaxLife synthatic ATF) + 24 oz Lucus in it was alot better and the more it was driven the better it got. but P0744 kept coming back Drain-Fill 2 : 3-4k miles later fluid black again but with a reddish tint 1 gal out, IN 3 qts (Valvoline MaxLife synthatic ATF) + 24 oz Lucus in its was better for the 1-2 shift but still P0744 comes up mostly now for > 50mph. instead of < 50mph. I highly suspect I have sticking Solenoid and/or Valve. My next steps are using SeaFoam Trans Tune in the Transmission trying to clean any varnish, and clean out stuff on valve body. after adding the Trans Tune will drive car 30-1000 miles before doing the 3rd and final ATF drain-fill.. hopefully this will do it. if it doesn't then I am going to have to open up the transmission This car doesn't get driven that much , its my son's first car now and use to be mine. transmission issues did not show up untill 3-4 months after he got the car. Doh I wish it was a stick shift wouldn't have this issue.

[@ctownsoul]

Thank you for all the videos you do. I have an unrelated question that I hope you can answer in a future video. My 2003 330i has a p0441 code. A symptom I've been having for a while is I can never fill up my gas tank without it clicking off prematurely, and It seems to be getting worse as time goes by. I usually leave the gas station in frustration as I can never get it past 3/4 full. Research has led me to believe that I have a problem with my carbon canister, which is why the gas nozzle clicks off early. On my last fill up, however, I couldn't get the tank past 3/4 full no matter how hard I tried. It would keep clicking off when I got to that point as if i were trying to top off the tank. That has led me to believe I have a problem with my fuel level sender. My question is do I possibly have a problem with both the canister because the gas clicks off randomly while I fill it up, and the fuel level sender because it won't let me get past 3/4 full? Thanks. I hope I didn't write that confusingly.

[@50sKid]

Ah I thought I had replied to you when you first asked the question. Basically your vent valve is stuck shut, which causes the fuel pump to shut off when you're filling. Ratchets and wrenches did a great video on this: kzbin.info/www/bejne/pmrag3eVedynbsk -- I do believe I have a bad vent valve lying around. I will do my own video on it.

[@ctownsoul]

Thanks for the reply. It never notified me that you had responded.

[@ruchkotv7659]

so if im still getting 3000rpm at 80 mph (which is normal for my car) then my seal is okay? does this code mean that in input shaft seal is now worn?

[@aldee3018]

i got the p0740 code. you have a good fix for this?

[@fadighossain1532]

hello @50sKid thank you for sharing your knowledge ; i have a ZF6HP19 Transmission on my e60 BMW ; i am having this P0741 Fault code; as i know this transmission engages the TCC much more than the ZF5HP19 Transmssion ; it almost engages it at all gears...i am really confused wether it is the same issue you are explaining on the zf5hp19 transmissions or it has another type of issue ; thank u in advance

[@50sKid]

What I explain in this video is particular to this exact transmission and doesn't necessarily apply to others. In your case the code could be caused by a solenoid impairing the torque converter circuit or maybe a worn valve component in the valve body.

[@fadighossain1532]

thank you 50skid

[@Gofuckurself14]

Hi jyst had a code pop up on me p0740 i have a 99 bmw 528i dont know what kind of moter I have it says Torque Converter Clutch Solenoid Circuit. Crews you please help.

[@johnn.tkachuk1693]

Hi Mr. Carlos Martinez. My name is John N. Tkachuk I have a 2000 BMW 528i w/109,000 miles. "Engine Lite" came on, tested -"Code PO740-indicates a fault in the Torque Converter Clutch Solenoid electrical circuit for a predetermined period of time" Is it possible to install a new Torque Converter Solenoid wrong if this code reappears back again? Could it be in harness or wire connection? Thank you John N. Tkachuk

[@luistrejo4323]

03 325i cog light came on. I believe it might have came on after the car was going backwards while in Drive, It stuck in 3rd gear I believe. Can you make a video on what can trigger this circuit?

[@lindsaylindsay2627]

My 2005 330I transmission service came on and seems it stuck in 3 speed (Auto transmission) what would case this?

[@JeSuisBacon]

Your title for the video has the wrong code listed, and I did a double take. It says P0174 at the moment. Great video!

[@chanceltw]

Yep, P0174 is the bank 2 lean code.

[@50sKid]

whoops, thanks

[@dfields9511]

do you know anything about P0744 on a Jatco RE4F04B (4 sp auto)

[@ryansnider946]

Is there any way to tell if it's a bad solenoid not pressurizing the lockup clutch that's causing the P0741 code or would a malfunctioning solenoid generate a distinct code? I just don't want to go through the hassle and expense of doing the torque converter if all it needs is a new solenoid.

[@thenman23]

did solenoid fix it

[@MrHengDoItAll]

Hey need help. I have 99 e36 stuck in first gear. add trans fluid nothing change. I have code EGS(Electronic Trans Control): Converter lock up clutch/gear monitoring :P0740. If Trans converter solenoid do you know location ? thank you

[@ducewill]

Jason great video finally a fix for the annoying P0741 code , I've been living with it for a year . So I need to change the pressure regulator and that will fix it ? Get your PO box I will send you a box of avocados lol they are worth they weight in gold !!

[@50sKid]

Nice! My avocado trees didn't fruit at all this year. Only got 1 growing. :-\

[@ducewill]

50sKid Put the longest nail available that works wonders

[@tonys4751]

pressure regulator will not fix 741 code, only replacing the torque converter.

[@DavidJackson-zg5my]

50sKid, I was wondering if there was any way to get in touch with you. I’ve got an E46 330i with a P0741 code and really loud random knocking sound coming from the bell housing. Would like you to listen to it and give me your opinion. Thanks, David.

[@tonys4751]

Any updates?

[@DavidJackson-zg5my]

TonyS No updates but still driving and still making the same noise.

[@JorgeTamezPhoto]

Hey Jason, I heard you say in the sulev car video that you won't do maintenance stuff to sell it, but I have an extra VANOS kit from iBMotorworks if you want it. Your videos have really helped a lot and I just want to say thanks.

[@50sKid]

Oh very cool, yes I will take it! I'm going to see about the PO box tomorrow

[@dsgb1981]

Took my 2002 Oldsmobile Alero to the dealership with the same code and it would start slipping when it was shifting into 3rd gear. They said the only option was to replace the transmission ($1800). I left as the car is 17 years old and not worth $1800. Is replacing the transmission the only option to fix this issue?

[@murigerick]

Great video, just a little more information, check also your TCC solenoid as it is much easier to diagnose electrically or electronically than the sealed Torque converter it self.

[@r1ace350]

I'm getting code for the torque converter solenoid - is the solenoid on the inside of the transmission? 2001 BMW 330CI Great videos by the way.

[@ironmantooltime]

How does the pressure reg cause the DG failure? 🤔

[@anthonyphillips9105]

I’m lost I’ve been told my car needs a torque converter solenoid and that it was a 30 dollar part where would it be located?

[@yelenabaykova7419]

Thank you!!!

[@ifadebarbersupply4696]

Does this code cause a sputter when trying to rev ?

[@robertofuentes9759]

Love your videos. Long time viewer. I recently began having the warning light come on next to my drive indicator (wheel w/! in the middle). It's happened after long drives, 200 miles +. Just before it goes on the rpms are high as if it doesn't want to shift. Once the light goes on it shifts normal again. It's a 2004 330xi. Any help and guidance would be appreciated.

[@50sKid]

You should get a bmw scan tool and read the errors in the computer modules. You will find a clue as to what your problem is.

[@robertofuentes9759]

50sKid Thanks my next purchase. Any recommendations? something mid price range?

[@johnberry9415]

I have the code p0741 after remplace the flywheel, I put new fluid and filter the trasmission feel great now am very worried abaut the code , where is located the solenoid torque converter bmw 330ci 03'

[@aleksandrrr]

Hi, is it somehow possible to disable the lockup clutch by pulling a wire or something alike?

[@50sKid]

It is not. It's integral to the transmission computer

[@alciniomelim5230]

very knowledgeable

[@zodx19]

Help... I recently got that same code p0174 on a 2005 Cadillac DeVille. I haven't noticed anything different about its transmission... it accelerates just fine there's no noise coming from it. What if I just leave it alone would it be okay?

[@meeks726]

Fireball XL5 same i need to know if I can keep driving the car safely

[@juanrodriguez-ry6yt]

it's a lean code bank 2 look for a hose of on the intake first

[@rosakrosan6000]

Hey man, I still have this code in my car. car runs smooth as ever and much better than any other flawless car . I took it to couple of mechanics to fix this but they are all saying different things. One told me this code was coming up because of the solenoid and changed it for $400 but the code keeps coming back again and again..What exactly should I need to replace?

[@Reyesramon24]

rosak rosan pressure regulator

[@ezekielmartinez1424]

Would my e46 fail a smog check if this code is present? Torque converters are expensive and I cannot be without my daily driver so this repair has to wait

[@hongluc4810]

I do not believe so, it is not related to emission

[@frankj1663]

Got the same code! After I delete it it keeps coming back after 1 to 2 months later. I never noticed any higher RPM and as you said

[@50sKid]

Hmmm... thing is I don't know if a bad actuator would cause a code or not. I would assume it does, though, you know? However it's really easy to test when you have the pan down--unplug it and jumper it directly to 12v. You'd hear the click.

[@DMartCHS]

Does any other codes pop up? I actually had this happen to me about 5 months ago. What I actually did was Changed the "AT Solenoid (Pressure Regulator) - Genuine BMW 24341423369" & did a TC-Rebuilt. My check Engine has never came on since then.

[@asmith041101]

I have the code but my rpms are as if it wasnt worn out, is this common?

[@omarcastro7306]

where do you see if you have zf or gm transmission. i changed mine on my 02 330i.

[@gmans7859]

Sticker on bottom of transmission pan and or tag on rear of transmission case.

[@mauricehinton5889]

My 2002 Olds Alero is showing both a P0730 and a P0741 code. Went to the dealership and they said they would need to replace my transmission with a rebuilt one for $1800. I'm not sure if I want to pay the dealership or just get a new car. Thoughts?

[@thenman23]

what did yo udo

[@mauricehinton5889]

@@thenman23 I didn't do anything. One day it was working and shifting normally, the next day, it wouldn't shift out of 3rd gear. It only has 160K miles. Luckily I only live 10 minutes away from work, so I can drive it there and back doing 30 to 35mph. No way was I gonna put that much money into an 18 year old car for a rebuilt transmission with a 6 month warranty. I keep the oil changed and brakes in good shape, and other small stuff, but that's about it. I'll keep driving this car till it won't run no more!

[@blasaviles5337]

I have p0744 code Sentra 2013 how can fix that?

[@hongluc4810]

I have a 325i 2004 with auto transmission with the manual option as well, I have a bad TCC so driving in auto it will shift from 1st and jump to 4th and will not shift any further So I tried using manual transmission option, it still let you shift from 1 to 5 and 5 to 1 since it's quite costly to replace the TCC going to drive in the Manual mode for the time being

[@kendonnelly3248]

Great video. Kinda scary to think i may have to replace the converter. Cant afford that right now. I was told that there is a solenoid that may be bad. I have a 2008 GMC envoy. I had my motor replaced with one that had 46K on it. The car itself now has 165k on the tranny. I'm contemplating changing fluid filter and solenoid. And pray for the best.

[@50sKid]

This particular cause of the P0741 code is specific to this transmission only. Namely, the seal blowing out inside the TC because of the pressure regulator. On your transmission, the cause of that code could be entirely different. It could have nothing to do with the oil circuit inside of the TC and it could be a problem with that circuit in the transmission itself. It could indeed be the solenoid that is involved in that circuit. I would do more research on your particular vehicle's common problems. You may find a common solution that is much cheaper than what someone with a BMW would have to do!

[@ericsilva2904]

After getting my fluid changed the po741 came up but truck is running fine. I don’t understand

[@UsualVenuz]

I Messaged You On Instagram & You Never Got Back To Me. Anyhow I Have Heard There Is A TCC Solenoid To Replace On Valve Body That Can Or It Goes BAD Causing P0741!! Torque Converter Lock Up Fails Because TCC Solenoid Is Bad. Is This True? Bad Seal Would Be Leaking Fluid And That's Not My Case. My Transmission Works. I have P0741 Code!! So Should I Get A New TCC Solenoid And Replace or Replace Torque Converter?? Or replace Full Transmission?? Thanks Hopefully You Get Back To Me On Here!!

[@larrywilson7470]

I need help I have a 2001 330xi and I have no reverse and in drive it shifts ok but about 3 my wheels lock up

[@50sKid]

if your wheels lock up perhaps there is a problem with the DSC system. The wheel speed sensors might be going bad.

[@hd221813]

Technically speaking, on a 2004 Toyota Corolla 1.8 VVT-i with the U341E 4-speed automatic transmission, it could be possible to modify the activation threshold of the torque converter lock-up clutch from, let's say, 48 mph to 160 mph? Doing so, that clutch would never engage and the drive would be more confortable and linear, despite the fuel consumption being slightly higher.

[@raularce63]

So your saying I could drive the car with the po741 code and get less gas mileage but really recommend changing the pressure regulator from the transmission

[@50sKid]

yes

[@Gunman1628]

i had the po741 code come on my 02 330i at about 50k miles. i took it to a shop and they wanted $5k to put in a new trans. seeing that it still drove like normal i decided if i am going to spend 5k might as well wait for it to be fully dead. the car now has 165k miles on it and its still running on that trans. The only thing is that this code is a emissions code and in my area causes it not to pass. i just spend $150 every couple of years to get around that with a waiver . these older BMW are money pits if one does not wrench on them themselves.

[@tonys4751]

I get around this by resetting codes and staying away from freeways. Within two weeks all monitors are complete except evap, which is fine in California. Have passed smog test four times doing it this way.

[@juanmembreno5128]

I'm have P0740 code what is my problem please help me

[@CarlosMartinez-kn9oj]

thanks for all you videos .what state you live?

[@50sKid]

CA

[@eldin9117]

wait , you scared me I have P0174 that am chasing for a while now. its a vacuum leak ?? not tranny right ?

[@ramongambino1977]

eldin dukic is it a vacuum leak . clean your maf sensor with CRC Maf cleaner at autozone . see if that helps . If not a leak in the intake boot or 02 sensor

[@50sKid]

yeah that is a vacuum leak--sorry about the mistake in the title. I have a couple videos for curing a P0174

[@eldin9117]

thanks, I tried all that , got new maf , new 02 sensors, replaced fuel ,air filter , new boot , new spark plugs , and still that code , am like so over it, only thing left is to try used gem maf from e bay , cause I was in a hurry and need a car to run son got new maf from auto zone , duralast brand , I know I know but I took a chance , because when I was cleaning my old maf I drop it and wire inside broke , so car does run ,but it doesn't have power on low end , so must be auto zone maf

[@eldin9117]

no worries , love the videos , I just got this 2001 325 I , low miles but man its like a baby always needs attention , this crazy vacuum leak got me lol ,

[@50sKid]

It's likely the ccv return tube from the oil separator to the dipstick

[@Krezo200]

Thumbnail looks like a mechanic joe rogan

[@jasondai6276]

My car has the same code, I been driving it for a while now. The torque converter would only lockup at 75mph or higher, some time it doesn't lockup at all. Any speed lower than 75 mph, the tc would unlock. My question is what's the normal tc locked up speed?

[@50sKid]

The tc can lockup in 3rd, 4th, or 5th gear. There's no one set speed it just engages when the speed is steady.

[@valeriii3005]

Maybe that torque converter knocks?

[@israelrodriguez4131]

I have the same code in my Toyota Matrix 2007 p0171 what do you think it is ?

[@thenman23]

p0741 or p0171? howd you fix it

[@smithlarry32653265]

I have a 2003 bmw 330i giving me code P0709

[@donavinsilvera5682]

Omg I literally just got this code this morning I thought it was over for the transmission what should I do?? Thanks

[@Xixu.co.6]

Your videos are super helpful but i have to say you must have bought the worst e46 in the world lol. Do you even get to drive it?

[@50sKid]

It's my daily driver. ;-) I wanted the worst one in the world that way I have material for the channel.

[@InJesusNameAmen143]

Who wants to by my E46 convertible 2003 BMW Red color 210k miles . Runs amazing . Alot of work done to it . Im in KENTUCKY . . Bought a LEXUS LS430 . so BMW is just siting . Its nice as Fxxxxkkk . $3500 . Let me know . Reply .

[@claytonthreadgill3711]

Good information but am I the only one that thinks he looks like Joe Rogan?

[@rayreyes9827]

No way hosey

[@morane5524]

Im sorry, love your videos, but the fluid that acts as a coupling in the torque converter is not air but ATF.

[@50sKid]

You misunderstood me, I did not mean that there was air inside the torque converter. I did say fluid. I was using an analogy that the fluid is the "air" in my earlier example of the two desk fans.

[@morane5524]

Im sorry, i havent seen that, this was not ment as a mockery in any way, thanks for the reply, love your videos

[@juanmembreno5128]

I'm have Dodge Journey 2011