BMW e46 Idle Control Valve cleaning ICV STUCK OPEN P1500

BMW e46 Idle Control Valve cleaning ICV STUCK OPEN P1510
In this viedo I'm cleaning throttle plate and idle contorl valve in BMW M54 engine and explaining what is causing P1500 ICV stuck open code
----------SUPPORT MY WORK----------www.paypal.me/elbowgreasediy
Visit my website www.elbowgreasediy.com/
Find me on Facebook,Twitter,

[@BigTea]

I’ve done the DISA and intake boots, but I never thought to clean the IAC. Now a year later it’s stuck. Thanks for pointing me the right way

[@407_ryan8]

huge help, no one else did this as clear, wish it didnt have music so loud so its easier to hear you, love the vid

[@saltyshellback]

This was very helpful! Just got my 2001 528i fixed from this video! Thanks a lot!

[@caio2306]

Very good and also well informing video. Thank you. That helped me.

[@devisddf]

Thank you so much. I clean my m54b25 :)

[@bahlsmcgee619]

Props for doing it in the daylight👏 thank you.

[@josenava2494]

In this video you said you had a video where you explain the solution for the idle control valve I can't find it in your channel could you send a link for it? Thank you in advance.

[@CryptoPay5555]

Top video! Thanks mate

[@YxungHermes]

Nice shirt, where'd you get it? and thanks for sharing your insight on how to clean the ICV and highlighting the common problems on the disa valve

[@jaimelobato3818]

THANK YOU VIDEO...!!!

[@likafu2389]

I can't find your video about the connection between the MAF and ECU. Could you provide a link please?

[@sydbell8508]

DISA parts can be bought made of metal ,so you do not have the breaking problem that you get with plastic ?? Jubilee clips best undone with small spanner,then you do not break tops off Good video and nice to see clean engine for a change

[@CHIBA280CRV]

Great tips thanks

[@hdotalam278]

Hi, can you provide link to the video which you pointed out at 22:42 minutes of this video about checking the maf cable to the ECU. Thanks.

[@ElbowgreaseDIY]

kzbin.info/www/bejne/rZyYlZ6JlNqifa8

[@atobsky]

i enjoy all your videos and i am a subscriber ..i am having po122 code whats best solution please

[@BMWZ3]

What are the symptoms of stuck ICV in m54 engine? Thank you for the video!

[@WilliamMartinez-zd7on]

rough idle engine shutting off rpm fluctuation stays on when giving gas

[@chungminhnhan]

Mine is m54 2.5l 2004, i changed 3 ICV and 1 DISA but the code still come up after 5min driving... do you have any other solutions?

[@theamerican7080]

I'm just here for the heavy metal music.

[@E36andE46vlog]

Is it always trowing P1500 (open and stuck)? And it is posible they dieing like the MAF sensor or is it just good or bad?

[@olddog123]

What were the other potential causes you were going to mention? Feel like I missed theses. Maybe you were explaining that when the sound cut out 😂

[@nzjemountfort]

What sort of symptoms would you expect from ICV problems - Great Video !

ICV i controling idle RPM so anything like rough, bouncung idle might be the symptoms, usually cleaning helps

[@danderson4089]

Usually a rough idle

[@widgetty22]

Spraying loads of wd40 inside the stuck icv would've solved your problem. Well at least it did it in my case. 👍

[@isrealperez9069]

I got one for you p1093 what is it and causes

[@mule666]

Recoment to replace the flap for an aluminium one

[@Goliath2012Thai]

Is this happen with P0505 code or not?

[@howlingmedia4354]

I recently changed my fuel pump and ff, but for some reason not enough fuel ain't making it to the injectors. What are your thoughts

[@mule666]

Change the fuel filter see if that makes a difference

[@donavancurrie3922]

what size o ring did you use for the DISA Valve ?

[@TjaIsHetAntwoord]

The best is to order the O rings through the dealership

[@mvc2177]

Will this cause a lean code?

[@mattlennymoore282]

Hi mate, love the vids. I have a few problems with my e46 320ci. Would you be interested in having a look at it? My main problem is pulling away. Kangaroos down the road without the right clutch control and feels as if the revs drop when you go to accelerate.

[@ElbowgreaseDIY]

UK?

[@mattlennymoore282]

Yeah mate, Braintree. You are London I think I read in a comment. I would gladly come to you.

[@Culinarybadboi]

@@ElbowgreaseDIY where in London are you?

[@ElbowgreaseDIY]

@@Culinarybadboi Not in London ,not in UK

[@sasomitch74]

idle air control regulating valve stays buzzing even after I turn off the car , I never replaced it got the car with 47,000 and now it has 157,000 miles.

[@cihangirasi]

22:54 this icv normal or not normal?

[@vito1095]

Can this cause EML?

[@MikeKraze]

I replaced mine, still getting the code, can the MAF cause this?

[@mule666]

You reset the code after replace? Because otherwise the code stays

[@sbrave]

How much better was your acceleration after this?

[@thekaus1028]

Watch for vacuum leaks or either o rings replacing in various sensors or even engine or oil pan gasket leaks

[@kobynedeau1519]

I'm not hating on the video but there's no reason to have to remove the filter period

[@donphillips5471]

Great video on idle control valve. Could have done without the music.

[@mule666]

E39 more easy to work on... More space under the hood

[@chiralhome]

I THOUGHT THOSE THROTTLE PLATES WERE NOT SUPPOSED TO BE MANUALLY MOVED??

[@ElbowgreaseDIY]

You can move them without any problem as long ignition is off ,You can also do throttle adaptation with your key and pedal

[@danderson4089]

That's just what dealers tell people to scare them from doing there own service work. Have confidence....because YOU can do it.

[@mukhtarp9218]

Great vid but the background music is so annoying

[@Vics251]

I wish I’d seen this video before I did the job on mine . 🙁

[@powerplay8355]

The music could do with being a bit louder ffs

[@SuperLiktor]

Camera work needs improvement