Bmw e46 m3 front brake upgrade f8x swap 380mm brembo 4 piston f80 f82 f83 m4 m2

[@RippedSocket]

This is great because these newer calipers are about $200 cheaper than the popular 135i calipers

[@finacialfreedomfighters]

I replaced my front hubs doing this and they do not even come with the studs for centering the disk so it would be dangerous. I ordered the spacers thanks for the vid!

[@rabbit4U]

Where did you find the spacers? Any link? I can't find any . Thanks

[@salvadortena7173]

Looking for same thing

[@IE46M3]

Great void’ Any links for the washer spacer ?

[@keronsmith8459]

We’re did u find the spacers can u send me the link please

[@keronsmith8459]

Can u send me the links to the spacers please

[@vysgarage]

Shim spec: M40x50mm, 2-2.5mm thick. Lines: E46 m3 with e9x unions and additional 30-50mm in length.

[@LunasGarage5]

Where did you source those washers

[@vysgarage]

@@LunasGarage5 ebay

[@IE46M3]

@@vysgarage Great vid, do you have link to these washer spacers? Can’t find them anywhere. Thank you in advanced

[@vysgarage]

@@IE46M3 2mm, m40 by 50mm www.ebay.co.uk/itm/253448405353?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=lzbdE57DSHe&sssrc=4429486&ssuid=jzxtgpbztkw&var=&widget_ver=artemis&media=COPY

[@IE46M3]

@@vysgarageGreat Thank you so much 👍

[@Armanis_]

Very good video ! 🤌🏽

[@leekindell9937]

@bircklean detailing i have just got a set for my m3. where do i get the 3mm washer spacer from

[@braedenbonhomme]

Any luck finding the spacers?

[@vysgarage]

Yes, I sell them as a kit

[@lukebright1516]

If you space the hub like you've done, does that mean you didn't need to trim the heat shield?

[@vysgarage]

@@lukebright1516 that’s right 👍🏻

[@pjpr3287]

Great video. Going to implement it to my e36. Would this upgrade work using e36 evo m3 hub using same method with the spacer? Thanks

[@vysgarage]

Hi I’m not sure about the evo hub geometry so can’t advise you. Sorry

[@pjpr3287]

@@vysgarage hi Thanks

[@crz1364]

Hi great vid! Is it worth doing with the 340mm calipers or waste of time?

[@vysgarage]

It’s an option but if you use vw t5 discs. With csl discs, is not worth it because the pad doesn’t sit right.

[@ricolam4916]

Is this set up overkill for stock e46 m3?

[@mrz111]

where can i found 380 discs? I've already calipers and i want to fit on Z4 e86 with 18 wheels

[@King_Sok]

Great vid. Where can I buy the adapter kit ?

[@vysgarage]

Pm me on insta or Facebook

[@johnvarney1844]

What about wheel fitment after fitting these calipers

[@NELGICH1995]

Hey Mate, just discovered your channel and wanted to thank you for detailed and professional explanation. Do you know If theres any similar way to fit these calipers on a non m-e46? Greets!

[@vysgarage]

Hi, Yes there is. Please pm me on facebook. 👍🏻

[@NELGICH1995]

Any other way to contact you? Unfortunately I don't use FB.

[@vysgarage]

[e-mail]

[@halimosmani8300]

What adapter are you using for the calipers?

[@danyan7]

none

[@eduardolima8560]

Do the F80 calipers and 380mm rotors bolt up to the e46 330ci knuckles with no washer or do they require a washer like the 340mm calipers?

[@vysgarage]

I haven’t tried, but they should.

[@eduardolima8560]

@@vysgarage do you think this setup can accommodate 18” wheels?

[@vysgarage]

@@eduardolima8560 yes, most of them

[@darrenboston342]

Sent you an email today bud 12th June, left my mobile, thanks Daz

[@Vyker]

Why do you think all the new M and M lite cars are being shipped with floating rear calipers and not fixed ones? (I think they look ugly)

[@vysgarage]

In my opinion it’s only to save cost.

[@harrisj2278]

Are these able to be fitted on an e90/92 chassis? Both front and rear?

[@vysgarage]

Depends on model. Which e92 do you have ?

[@harrisj2278]

@@vysgarage I have a pre lci E90

[@vysgarage]

It is an m3, 320i, 330i, 335i?

[@bull7618]

Is this upgrade possible on the e46 non m without swapping in m3 knuckles?

[@vysgarage]

Yes

[@basterbogt]

I bought a set from an f30, but it isnt the 340mm one. Its the 370mm. Are those the same as the f8x?

[@vysgarage]

Yes they are the same 👍🏻👍🏻

[@basterbogt]

@@vysgarage thanks alot, it makes it alot easier to find parts. My f30 set only has 345 mm rotors in the back. Dont know if thats the same compared to the f80 370mm

[@vysgarage]

@@basterbogt the Calipers are exactly the same. 👍🏻👍🏻

[@basterbogt]

@@vysgarage so ordering f80 rears will work fine?

[@vysgarage]

@@basterbogt yes

[@driver_18]

Will this be compatible with a non M e46? For a 330ci?

[@vysgarage]

It’s slightly different on non-m. See my other video

[@michaelrawlings3785]

Hi do you do this as a package.. I’m based in uk over in Berkshire

[@vysgarage]

Hi, I do 👍🏻

[@michaelrawlings3785]

@@vysgarage would you like me to send my email so you can send prices .. I don’t mind some used parts

[@michaelrawlings3785]

Iv emailed you thanks for responding back on here

[@noemartinez798]

Any brembo upgrade for an e39?

[@vysgarage]

I’ve been asked this question so many times but I haven’t done anything with e39 yet, so I just went and ordered an e39 front hub to come up with a solution. Watch this space 🙂

[@sr20dett1000]

What needs to ne done to fit E46 non m?

[@vysgarage]

Just need to space the Caliper with m12 washers.

[@sr20dett1000]

@@vysgarage Thank you. What about in the rear?

[@vysgarage]

@@sr20dett1000 rear isn’t that simple. I did a video about using e82 rear Calipers.

[@sr20dett1000]

@@vysgarage the rears is easy with 135i Brembo calipers on E46 330i using E46 m3 rear rotors. Saw you post about using 340mm front rotors. Here we don't have vw transporter. I'm thinking of using 345x30 rotors from a 2016 Chevrolet Camaro SS, hat height is 61mm. Will need to check the rotor swept area.

[@mrz111]

18 wheels? Or 19?

[@vysgarage]

19, but 18 will also fit

[@dumbeezy5480]

@@vysgarageI have an e46 zhp with stock wheels. Would these fit without problems?