BMW E92 335I FULL LIP KIT INSTALL: FLOW DESIGNS

[@123divad]

I imported a flow designs splitter for my M135I to the uk , best on the market and super strong, really well engineered

[@ZeroTo60Tube]

I am still blown away they are actually supporting the channel, very grateful. It's such a good product. I bet shipping was killer to the UK, but for us here they are cheaper than china fibre glass versions and so much better.

[@Tewty11]

@@ZeroTo60Tube Do they have a EU Supplier?

[@ZeroTo60Tube]

@@Tewty11 Not that im aware of.

[@StratoJohn]

That's pretty wholesome that they've recognised you and your hard work and want to help out

[@skatepark02]

Time to go full flat bottom to make good use of the splitter. Get some low pressure downforce going on.

[@friguy4444]

Yeea that truly does look SICK! The blackout of the whole look and the new skirts are next to perfect IMHO. Killer! I have a similar look but I have the chrome around the windows that kind of wrecks the whole effect. I guess I'll have to change that. I think it was actually an optional extra from new. LOL.

[@andrewwilliams5337]

Looks siiiiiick! and who needs friends when you've got "Trusty Broom".

[@ZeroTo60Tube]

here here..... haha

[@davidrowe2217]

I’ve always been a 4 door guy but when the coupes are done right, they look really aggressive! This car looks so much better now

[@stephenmoore5775]

Aftermarket fans use a sort cable tie through the fins off a radiator to mount them without damaging the rad, if you get two very long cable ties , drill 2x 8mm holes in the back of the bumper part of the bumper that's all distorted, loop the cable through the big intercooler fins to the front and then back towards u and down thru the hole and up to the clicky bit the cable tie and tighten away until your level desires 😉love cable ties 😄

[@ZeroTo60Tube]

Not a bad solution!

[@Nico_335i_DCT]

Very nice stuff guys. I love it! Dutch regards, Nico.

[@kencooper8636]

It is good to see the 17T BMW back in the videos again Andrew. With the hail damage and leaking roof, it has been a while since it has featured in a video. The splitter and skirts certainly suit the car and appear to be very good quality kit. I look forward to the single turbo installation which hopefully will be soon followed by some track action. Good luck with the install.

[@ZeroTo60Tube]

Thanks very much Ken, how is your motor progress going?

[@kencooper8636]

@@ZeroTo60Tube I got my car running over the weekend. It has an issue with slightly rough idle and jerking and no acceleration up grades which I am trying to sort out. Other than that, it runs ok.

[@ZeroTo60Tube]

@@kencooper8636 Ohhh man, hopefully its a O2 sensor or vac leak, something simple.

[@kencooper8636]

@@ZeroTo60Tube It appears to be a Vanos intake cam issue. DTC 2A82

[@ZeroTo60Tube]

@@kencooper8636 hmmmmmm, well let me know when you work it out. Gonna be solenoid, connection or oil. So shouldnt be too hard to diagnise.

[@GregoryOcol]

hyped for single turbo!

[@estebancampano1925]

That’s what I call I right move! Esta brutal! (It’s meane)big hugs from Spain 🇪🇸

[@markburkey6371]

"skirt, skirt"- Zero to 60 ... Duly noted...🤣

[@mircebob]

Had the same lip on my E90 n54 with M3 replica bar. Looked mint!

[@lynxs1981]

Looks great! I run an e92 without trays and an e90 with; both bumpers drop down like that. I put a piece of angle aluminum inside to hold the bottom of the bumper up flat.

[@kar4tube]

I LIKE IT! And... I see they make a kit for an E82 M Sport as well! Damn, was planning on a new set of PS AS4s this summer, but now I'm incredibly tempted to go with Flow Designs instead

[@pugs1377]

Looks good. Better than I thought. When is the n63 swap into the 540?

[@Mp-jw1qg]

thats the setup i have on mine . looks just as sick with a 28" radial

[@BigAl22]

Thing's sick! Might have to pay the crazy shipping to get that to the states

[@nickn.3375]

man i need to find my self m-sport bumper kit definitely going to get these after the strength demo :)

[@johannyrodriguez5730]

looks awesome. I don't run an under tray either mine was all mangled so I took it off but yeah the kit looks really nice

[@ydhreaytjk4w]

i really like the new look of the car

[@ZeroTo60Tube]

Thanks so much. I keep taking photos of it!!!! haha

[@maxgr7723]

Interesting install and thought of aerodynamic improvements ..but I'd see me getting pulled over in germany already 😅

[@AlejandrosEngineeredLifestyle]

Looks great! I’ve got the pre-LCI so I think the M-tech looks great on its own as well. I am building parts to start my 2.0 build now so I’m looking forward to seeing the direction you’re headed! Happy Easter!

[@oCaptainKorma]

daily my hybrid turbo straight piped n54 😂 I can completely understand this comment. MHD cold start- off, is your friend.

[@AlejandrosEngineeredLifestyle]

@@oCaptainKorma music to my ears friend 🔥

[@lancewood1410]

The message this channel has been preaching ALL ALONG 'subliminally' is.......git a fking hoist LOL

[@ZeroTo60Tube]

hahaha, hoist and a trailer, must have accessories for any BMW owner.

[@lancewood1410]

@@ZeroTo60Tube LOL, 2 weeks ago just had my E90 flatbed sent to the workshop for that darn waterpump replacement.

[@2ndProtects1st]

Happy Easter

[@InstaltechCarAudio]

Good video 👍

[@TheMultiDouche]

Do you want me to 3D print a couple of studs on blocks you can epoxy to the cooler to pull the rear of the bar up. The plastic will snap if you catch it on the ground leaving the intercooler fine but the rear of the bar up

[@ZeroTo60Tube]

It needs something, i do need to come up with some sort of undertray, air duct, to direct air in to the cooler. Considering its all coming off next week for the turbo, i will put some thought in to it.

[@TheMultiDouche]

@@ZeroTo60Tube Just sing out when ever dude. I'm sure we can design and print something that does both.

[@ScubaSteveArkinstall]

She’s look’in sweet!! I wouldn’t mind something like that on mine too!

[@SikaSeeker]

Oh yeah, looks smicko

[@michaelpast19]

Please please tell me what calipers are those ?? They look like brembo but my questions where did you get those ?

[@timothy3095]

Set all the records you want my friend. My 335is DCT is going to destroy and then own them all this Summer.... I have the same JMC tuning equal length header ST kit w/PT6875, all M3 suspension and steering, BMW OEM M3 carbon fiber roof, M3 Wavetrac LSD, M3 DSS axles, 3.5in aluminum drive shaft, SSP spec X clutch kit, s55 flywheel, Nexsys B58 coils, VTT billet intake/1200cc PI manifold and valve cover w/OCC kit, closed deck, Wiseco boostline rods, JE 9.5:1 pistons, Ferrea valvetrain, Schrick cams, ported head, Motiv ReFlex, triple walbro fuel pump, seibon carbon everything, new full paint respray of a beautiful M individual color.🤫 It would take me hours to list all the upgrades, those are just my favorite ones. Every part is purchased and already at the shop. This car was stolen from me in February 2020 by and alcoholic jackass while I was in the hospital in a coma for 2 weeks with a brain infection. (Seriously, THIS IS A TRUE STORY!) He blew up my upgraded twins while running from the cops and did some internal damage to cylinders 1-3. I've been saving ever since to do this dream build. It's going to be a ½ mile and roll race monster! Also... it's all controlled with nothing but two hands. ♿ (I'm paraplegic) This build should be done early June, then me and the GOAT N54 builder John Gago from Boosted Bimmers Chicago along with the GOAT N54 tuner DOC VU will get it dialed in to be unveiled at Mpact East in August. I'm actually in the hospital healing from a surgery since February 2nd, and this is something I've been wanting & waiting for for a VERY long time. I'm picking up every record I possibly can. If I don't do it the first time, I will not stop until I have enough to satisfy my monster 335is' N54 hunger. See everyone on track, the strip, and the streets very soon! I've loved this turbo BMW/N54 community since I bought the car new in 2012. I can't wait to be a bigger part of it.🤘😁✌️ You can follow the build on Boosted Bimmers/John Gago's channel... "N54 Racing Channel" kzbin.info/www/bejne/o2nMpXuHoLB-nrs

[@Hyngyynj]

I like it 🔥

[@YTuberosity]

What about M3-style side mirror caps?

[@ZeroTo60Tube]

Been keeping my eye on them for sure

[@loekfelten548]

👍👍🍾 love it !

[@dawso2o2]

I think bmw are just the best underrated tuning cars in the world 🌍

[@dawso2o2]

I taped mine on to hold it on

[@TheChris91173]

Are you planning on upgrading to b58 anytime soon?

[@ZeroTo60Tube]

Would love to, but they are worth so much money here, it wont be happening any time soon.

[@grev8]

Is your 335 non m sport? I went to get this kit but they say it won’t fit non M?

[@Saif0412]

Looks 👌 just the diffuser left and it'll look even more tasty 😜

[@ZeroTo60Tube]

Hmmmm, im not sure what to do there. Kinda toying with single exit..... :S

[@Saif0412]

@@ZeroTo60Tube twins look cooler in my opinion 😎

[@racker5108]

@@ZeroTo60Tube a single exit exhaust, paired with that single turbo kit that has equal length headers, will most definitely make the car sound 2JZ swapped lol

[@JokerSpadesMusic]

Amazing I wish they had e90

[@BumpTune8462]

You may have explained previously somewhere? But how did you end up on the n54/e9x platform? You definitely seem to really enjoy these cars.

[@ZeroTo60Tube]

In 2016 we filmed one and it was our most popular video. I’m 2019 this one was on market place cheap. I planned to flip it, but fell in love.

[@MichaelWilliams-nf7of]

Looks good so much easier if you have the use of a ramp!!!! 😝

[@jimstrongone]

624 on pump fuel... That's great 👍 was Adam running port injection on that 624 horsepower run?

[@ZeroTo60Tube]

He was yes. Although on pump it wouldn’t be doing much. I just realised it was 26psi, but very conservative tune. His 4th gear is hurt.

[@timothynutu8939]

man that looks rly good! i’m considering it for my e92. quick question: what exhaust are you running at the moment. i love the way yours sound but mine is just too loud with a muffler delete and catless downpipes. it was bought with a muffler delete and i had to do the downpipes cuz power😅

[@ZeroTo60Tube]

This is a Miltek exhaust, very quiet and i kinda love it now. We put an empire exhaust on the flow max car its horrifically loud.

[@timothynutu8939]

hahahaha im trying to put mufflers back on my car because its just too much with the catless downpipes. ill look into this miltek exhaust, I think its perfect for what I want!

[@idokwatcher2062]

You did not sufficiently explain sideskirt install -- are those self tappers screwed into new holes? what about rust?

[@ZeroTo60Tube]

They are nuts and bolts in to plastic

[@djglobol]

@@ZeroTo60Tubedo you have to take the skirts off the car to bolt on the side skirt extensions?

[@ZeroTo60Tube]

@@djglobol No, but you bolt them to where the skirts lower bolts are.

[@limalimauk]

It looks the bollocks!

[@ZeroTo60Tube]

the dogs ones..... if i do say so myself

[@docgramps1]

"don't have the usual youtube bs", yep you sure don't. Thank you for that! :D Yeah man, digging that, looks sick / not cheap / not shoddy fitting - nice. Do they do them for e61's? **edit** e60, so the splitter would fit... damn it, I'm meant to be saving for stuff the car needs, not what I want... haha

[@jodyestevens9911]

what’s your wheel tire setup?

[@ZeroTo60Tube]

F80 m3 wheels with 15mm spacers all round, running stretched e92 stock 19" tyre size.

[@anthonyjordan7847]

Plz Rim information I want them on my 335i

[@ZeroTo60Tube]

Stock F80 m3 wheels with 15mm spacers. Running standard 19inch 335i tyre sizes. Rear guards are rolled and stretched.

[@Matthewww747]

Fuck we’re twinning hard now lol, my cars the one flow used to develop the kit

[@ZeroTo60Tube]

Are you running spacers on those 437s yet?

[@Matthewww747]

@@ZeroTo60Tube nah not yet, thinking I should though haha. What tire profiles are you running? I’m currently running 245/35/19 and 275/30/19 Zestino 07R semis on it at the moment, I get a little bit of scrubbing on full lock at the front 🥲

[@kkarnis3791]

How do you go running without a undertray? Doesn't it get rock damage and things like that?

[@ZeroTo60Tube]

It never came with one and when i eventually got one, i thought meh, i'll fit it when i finish modding it and well, who knows when that will happen. Temps seem good with no under-tray, but the engine bay does get dusty.

[@ichoozjc]

@@ZeroTo60Tube Yeah biggest thing is the dirty engine. I left mine off for months because I was always modding it. Well, still am but after seeing how dirty the engine bay gets I suffer through removing it every time I work on it.

[@skatepark02]

It’s more for aerodynamics. Without the under tray you will get lots of air turbulence which will cause drag and high pressure which will reduce downforce by creating lift and you can potentially have less grip at high speeds. Not to mention fuel economy will likely suffer too

[@iliketorockrock]

cool!

[@pavelmv]

Are there any similar sets for e90 LCI?

[@ZeroTo60Tube]

Unfortunately not yet

[@pavelmv]

@@ZeroTo60Tube I can keep on hoping in the future.. P.s. l ove your channel!!!

[@schnelll1748]

But they don't do anything for F80 :(

[@benperkins2929]

Nice

[@ZeroTo60Tube]

Thanks

[@benperkins2929]

@@ZeroTo60Tube Keen as to see this G35-1050

[@Jawnwickk]

What wheels are those? F30?

[@ZeroTo60Tube]

F80 M3

[@mike_oe]

Ok, the car may look more gangsta now, but it's also a few kilos heavier. I'd much rather see a video on replacing the e92 hood and boot lid with ligther parts. At a reasonable cost. The N54 cars are not getting younger and we can't afford to spend much more money on them when we also need to save up for a M340i ;)

[@ZeroTo60Tube]

Maybe one day. Never been one for weight reduction on street cars.

[@michaelsuckling3832]

Looking good but where's Dave these days

[@ZeroTo60Tube]

Helping our parents out. Been a mega project

[@TopiAS06]

i dont know why, but imo black is best color to any car, dont know why.. only bad thing is keeping it clean.

[@ZeroTo60Tube]

Agree'd totally worth the work to keep clean too.

[@chrisrobles2012]

4:00 “looks a little bit” ....dic-arse Wasn’t that a popular brake video?

[@ZeroTo60Tube]

different type of dickey...... that was dickas......nvm

[@igotaction]

Speed bumps Andrew, speed bumps eat jacking point braces. Speed bumps designed by the Devil himself.

[@jmsterdam]

Take us on a drive next time, we can handle 25 min videos

[@ZeroTo60Tube]

Ok ok!

[@EhFokes]

"Skrrt skrrt"

[@jmsterdam]

Everybody got the, “thats what she said” in their mind?

[@ayr4455]

Sorry..it looks like 💩.

[@ZeroTo60Tube]

haha, everyone has their own taste.