BMW engine N62 V8 Assembly instruction. Part 1

[@SheaAP1]

Sharing this channel. I was disappointed with the lack of aftermarket support with my e60 550i after purchase. Made my day watching this assembly video. Hope you continue to support the N62 platform mods and tutorials!

[@doctorlavrbmw]

Yes! Sure! :) Very soon the 2nd part of the video!

[@ChrisTyroneDrip]

Yes no aftermarket about the e60 550 I was disappointed. All about the F10’s and up

[@FishFind3000]

@@ChrisTyroneDrip aftermarket doesnt like NA engines only turbo since they can make big power numbers with easy upgrades

[@ChrisTyroneDrip]

@@FishFind3000 yeah I figured that’s why I sold my 550i in exchange for single turbo e36 👌🏾

[@ChrisTyroneDrip]

@Burim Bunjaku 550i was fairly unreliable. Single turbo e36 was faster than my 550i and more reliable

[@greengoldmello]

Im in the process of an n62b44 rebuild myself. I avoided removing the pistons and crank. Very helpful and well made video!

[@doctorlavrbmwperformance2467]

Thank you friend!

[@doctorlavrbmwperformance2467]

Friends! This is a new channel for repairing BMW engines and tuning exhaust systems. Help with views, comments and likes!

[@Shas4Ever]

We will...

[@Trinibad718]

Hi can you give me a website where I can purchase crankshaft and Conrad bearings for this same engine having a very hard time if I have to send you the money to get it I don't mind I'm located in USA

[@djoneshot8925]

hi my car is at the shop I have a 2009 BMW X5 4.8l i'm having a hard time finding the piston rings can you tell me the piston rings spec are the ? bore= 93mm 1st - 1.50mm 2nd - 1.50mm 3rd- 2.0

[@doctorlavrbmwperformance2467]

@@Trinibad718 Unfortunately I can not help, sorry

[@Deadslowsupra]

Man keep these awesome n62 alive!!!

[@prabhakarshenoy9571]

Thank you so much. I have four BMW X1, 528i, 540i and 740il. I love BMW cars. I enjoyed repairing on bmw things. Thank you for your vlog

[@anasgharaibeh9997]

Thanck you very much Each minute in this vedio have Useful information best content for n62 go ahead.

[@chrisN80]

Amazing job on the video and description on how to do the job

[@xgiftbolzenx]

Cool video, I drive a 545i and i love this engine. Nice to see how it's build from scratch. You are awesome!

[@gabrielchifor8680]

Very valuable information. Thank you for sharing a very well done video on this engine.

[@MaxAKbar47]

Nice video. Really insightful. It would be nice if you had a similar video for a s62 engine.

[@MrConnorHorton]

Thanks for the incredibly detailed video

[@Shas4Ever]

Great and very useful video.

[@truckatadders]

Can you provides a link to where i can buy that engine stand please?? It's the closest I've seen to the ones in the dealership 👍👍

[@peppaandpay]

i'm happy with this video I just wish it didn't move so fast.

[@x1area51ii7]

This is like grilling steak but in metal lol..awesome

[@judochopthefed]

X1area51 II haha. 🎯

[@doctorlavrbmwperformance2467]

:)))

[@kavintruong1106]

did you use new crankshaft main bearnig bolts and caps? i know you said new connecting rod bolts but what about the main baring? are they reusable?

[@Proteinpulver812]

Hello, can you please tell me what the name of the motor stand you are using is called

[@meayman1]

hi, thanks for the video, could u please tell me from where u got the lapping tool and spring compressor tool :)

[@FishFind3000]

Im surprised your not using engine assembly lube

[@SanDoval201970]

so after you are laping the valve, after your done you mix the valves , so in dosen matter what order they go I all way live valve one with cylinder one I do not mixing them, so that ok it dosen't matter?

[@ivandro1983]

I have a question,the loose leaves of connecting rods are blue and red ?this is what a got from official diler ship like set.

[@ivandro1983]

They're different colors,it's right or thry make mistake?

[@mathaaushle]

”Spred locks of composite ring” what is he using?

[@kombo7939]

Hello, I really like your videos and i just wanted to ask if u could give me a tip where i can buy that holder for the engine u have in your videos. Thank you for response

[@vojtechskoda2710]

First of all I would like to thank you for a great tutorial! Can you please give me advice - I bought timing tool kit, should I do any marks on vanos or camshaft anyway to don't screw timings ? Or I can continue taking heads of with calm conscience ? Thanks.

[@chidiigilar7128]

Is it possible to replace an N62 timing chain in a BMW x5 4.4i E53 without unbolting the alternator and also what socket size did you use to loosen the crank shaft bolt?

[@The_TURK.]

how should you drive the car after having re-engineered the engine? do you have to drive slowly or drive fast so that the engine has full power again?

[@baims8367]

? Or his Bmw guy I recently but 1 owner 2008 550i very nice how ever needs the valve seals car has 90,000 not bad yr. I was going to remove engine and Trans to replace the seals also rear main a gasket replacememt on woke engine might as well ? Is there any performance prt for this I can't find any cams pistons ect like to hop the engine up headers ect if u know of any mods and parts please let me know thnx

[@ryanlabbate515]

Hello does anybody know if this is the same for an m62b44?

[@judochopthefed]

Perfection. Has BMW changed their gasket material for the better?

[@doctorlavrbmwperformance2467]

Thank! But I did not understand your question, friend.

[@PaivaRoni]

Show/Congrat!!

[@Trinibad718]

Is it the same thing for the 4.8 n62

[@Gtbtdx]

Guten Abend. Bei wie viel km würde diese Arbeit gemacht? Wie sahen die lagerschalen von kolben und kurbelwelle aus? Wie war das hohnbild? Allgemeiner Verschleiss?

[@doctorlavrbmwperformance2467]

Overhaul of this engine was carried out at a mileage of 200,000km. But it was not made due to engine wear. There was a hydro stroke in the cylinder.

[@thienti1908]

Can I remove the heads of the N62 (on the E60) without completely removing the engine?

[@haipingwang7075]

Yes! But it needs lots efforts out of your mindI did twice!

[@leonwittorf2388]

are the exhaust and intake springs of the valves the same?

[@magicm6372]

No. The exaust are longer.

[@leonwittorf2388]

@@magicm6372 they are the same

[@leonwittorf2388]

@@magicm6372 it is also the same part number

[@jianruli3750]

Where I can buy the valve compressor tools

[@doctorlavrbmwperformance2467]

In the online store, friend :))

[@judochopthefed]

Dr. Lavr, When purchasing your headers, should I cut my cats off my manifolds or purchase high flow cats and weld onto the headers? On a bmw 645

[@doctorlavrbmwperformance2467]

First, you install a sports collector. Second, you inject sports catalysts into the exhaust pipes at a distance of 30-50 cm from the manifold flanges.

[@giedriusstankunas4320]

whats different between Hm and Nm torq?

[@doctorlavrbmwperformance2467]

There are no differences, this is the same, too, friend.

[@Trinibad718]

what if I use assembly lube instead of oil to coat the bearings

[@msengineeringdavid3148]

Don't mind whats done in the video assembly lube is what you want on there for a dry start.

[@garyvanremortel5218]

What the hell is a radical bearing?

[@szaboimre9268]

Hi! This is USA model?

[@Manny91352]

And final step check engine light 😆

[@moolyong]

피스톤링 플라이어좀 사서써라

[@FishFind3000]

who ever is doing the voice over and saying tighten to N M is annoying!!! Its newton meters!!!!!!!!!!!!!

[@ronamariemelad4061]

very dirty!!! much better if you insert the piston rings in the grove the apply oil