FULL TRANSPARENT ENGINE CYLINDER AND HEAD 2 STROKE SIMSON TUNING

[@chylo00]

Any ideas for next videos? :D

[@matiasbosso3586]

Saludos desde argentina! Muy entretenidos tus videos

[@mateuszjankowski961]

transparentny wydech i uchwycić rezo ::

[@Grzechu0]

Kartery przezroczyste? Do zrobienia? - -

[@bennetdh9566]

Transparent Membrane Box

[@johannessadewasser9551]

bigbore this cilinder to 85cc and 4 port, add big intake valve and 28mm carb ... so first plexi cylinder with dyno run

[@duckbizniz663]

Incredible demonstration of 2-stroke single-piston combustion motor. The builder is incredible. He built a combustion chamber out of transparent plexiglass and made it work. It is amazing how fast the piston is moving inside the transparent cylinder. I have a greater appreciation of combustion engines and how it has to work to generate power and torque.

[@PakularCristi]

for a moment after he started the bike i was like where is the piston it is insane how fast it moves

[@gabrielesposito2735]

Hi Duck. Great comment! 💯 Is this material heat resistant and safe for regular riding?

[@mavr6384]

this comment has to be ai generated

[@TheKing-dx1if]

​@@gabrielesposito2735watch the whole video to see why it is not

[@boris7204]

Really amazing work!!! Especially to see that on "SIMSON" my unfulfilled dream from young age 😂❤

[@АлександрСеменкин-я1ф]

Такие модели с прозрачным корпусом надо ставить в учебных заведениях чтобы учащиеся понимали как работает мотор и видели весь процесс вживую!!! Очень круто получилось

[@сашап-з9у]

У меня на учебе были макеты в разрезе

[@shellycooper007]

надо развивать пространственное мышление учеников чтоб не надо было делать прозрачные движки

[@михаиляшик]

для 2 т , не для 4 т

[@alexs.3210]

И стоили ли усилия результата?..

[@АлексейЛасточкин-у5у]

Ага, проводить демонстрацию для потока и каждый год новый точить.

[@esl_ea_extremanders3983]

Hut ab für den Mut bei dem Projekt Danke für die viele Arbeit und Zeit die da drin steckt. Sowas muss man sich einfach anschauen Zeit 100% nicht verschwendet 😊😊

[@nagarjun385]

The amount of Joy he experienced when it worked shows the true hardowork of an Engineer. Good work, man!!

[@huntercollier6444]

10/10 you guys! I build engines for a living and getting to see stuff like this makes my whole week. I would LOVE to see this in collaboration with the slowmo guys or something to get super slow and clear footage of this work of art. 👍

[@andylewis7360]

Totally agree! I watch 2Stroke Stuffing and just don’t get what he’s trying ti do with his ports. Probably because I’m far more familiar with 4 stroke engines.

[@falco447]

@@andylewis7360 No one gets what he is trying to do. He is doing too many things at once, has too many projects going on at once and tries to reinvent EVERYTHING from scratch. No wonder that he is running into constant issues and never sees much success with anything. He is just being way too chaotic. He should focus more on less things.

[@andylewis7360]

@@falco447 Yup. I think you’re right. Perhaps Alex is trying to emulate his hero Burt Munro just a little too much and do everything himself from first principles. Hopefully his new-found German friend group will help him to focus in more specific directions. He’s a good man. Success is in him. But at this rate it could take his whole life to let it come out.

[@michaellane7991]

that would be amazing!!!!!!!

[@terryschutt5093]

@@andylewis7360 2 strokes builders know porting makes power . Been porting myself since 1971 .

[@michaelbwbrenner]

REALLY informative video that helps visualize the function of piston windows and transfer ports. I think many of those who claim to understand how a 2 stroke works are only thinking of how an engine without tranfer ports would function

[@koctya2521]

Мужики, огромный респект. Столько труда ради пяти минут удовольствия. Оно того стоило! 🔥🔥🔥🔥👍👍👍👍👍👏👏👏👏👏

[@user-Tlink244ew]

Я бы поменял знак препинания на вопросительный - ,,оно того стоило?,,

[@alexanderche1274]

@@user-Tlink244ew 7,3 ляма просмотров за чуть больше месяца. Наверное, стоит.

[@jameswebb5099]

@@user-Tlink244ew 8,5 ляма просмотров, это больше чем стояло))

[@AUTOKUZOVbodyrepair]

@@user-Tlink244ew Точно , херня полная .

[@verossavr3027]

@@jameswebb5099 денег заработали, больше чем ты за 3 года

[@scotsiain1970]

Nice, I had a simson s51 when I was 16 back in 1987. East German moped. £500 on the road a Japanese moped was about £800 new. Crude but faster than the Japanese peds, there was a restriction in the exhaust header. I replaced it with one from a larger capacity mz can't remember which but I used to give 2 mates a lift out of town, 3 up no problem out on country roads. Good times 😆

[@NickTheQuick82]

We had challenges who can pack the most people on a simson. The record is 7 People!! One on the steering, 2 on the tank 3 on the actual seat and one on the package carrier...😅 awesome times!

[@scotsiain1970]

@@NickTheQuick82 you didn't realise it at the time but you were an early eco warrior. 7 people from 50cc. Forget your tesla etc. A simson s51 is all you need 😆

[@Kevin-vv6oe]

Im semi retired now after many years of fixing all kinds of engines. Don't think it will go far but i really appreciate that you made the parts to make the video . Bravo!

[@JYKDutchYT]

if only something like this would last without melting I'd drive it around at night all the time. Awesome content keep up the good work !!!!

[@Reichsritter]

Unfortunately there's no transparent steel and glass is too fragile

[@DarrenJamiesonJamieson]

I just showed the piston in operation to two girls and they got all porno about it! Quite frankly I don't know why I bother!

[@dustinandtarynwolfe5540]

Glass at that thickness would be plenty strong enough. It's the heat cycling that would be an issue. The warm up procedure would be obnoxious and forming the jug to the proper dimensions would be prohibitively expensive. But it could work. Your average KZbinr wouldn't have the resources to pull it off though.

[@LilLizabeth]

@@Reichsritter ahhhh then let me tell you, there is transparent aluminium! also called (aluminium oxynitride) its a transparent ceramic composed of aluminium, oxygen and nitrogen. Used on space ship windows, the tips of ballistic missiles to house the camera and its so strong that a 1.6 inch thick piece can stop a 50.cal round, in comparison you would need 8 inches of layered armoured glass to achieve the same result.

[@HellionBlade90]

@@LilLizabeth thats sick as hell. but how expensive is it? could it work as an engine block? the idea screams translucent N64s from the 90s lol. it would look amazing on a motorcycle or quad.

[@tsusas]

Your work visualizes what an internal combustion engine looks like. I respect you for putting in so much effort for just a few minutes.

[@JavierBonillaC]

This is a thing of beauty. It's made 2024 worthwhile. Should have one in every school

[@toomen2]

То редкое видео из серии "теперь я видел всё". Спасибо вам, парни. И поздравляю с удачным запуском двигателя.

[@yeimerortega7522]

me encanta te entedi todo

[@maik6843]

Sauber gemacht 👍. Ein komplett transparenter Vergaser wäre noch interessant, sodass man die Zerstäubung des Kraftstoffes schön sieht. Beste Grüße

[@ДмитрийДмитрий-ф2б7о]

Тоже подумал об этом

[@chaosgamingtv3426]

das wäre der Wahnsinn oder watt?

[@stanmatan2381]

gibt ein Video (How does a Carburetor work?) vom Kanal ,,SmarterEveryDay,,

[@brokatjacke]

Transparente Damenunterwäsche finde ich noch interessanter.

[@liorgold5303]

The amount of work you put in making this engine is unbelievable 💪

[@sergerozin9178]

Это великолепно, ребята. Работа аккуратная! Берегите себя, удачи вам!

[@davidsnyder2000]

That is so cool😄👍 I can’t believe the plastic can handle the heat for so long. The side crank case cover looks pretty cool as well. Can see the flow of oil throughout the gear box. Awesome build👍

[@АлександрСтрочилов-е5р]

Охлаждение...ноль.

[@cassiusdio6048]

It didn’t hold up for very long but still cool. 😎

[@Spid88PL]

Taki model dwusuwowego i czterosuwowego cylindra z plexy powinien być w każdej podstawówce, przecież na tym tak genialnie można wytłumaczyć zasadę działania, że szok! Brawa dla ciebie Chylo!

[@BoozySZN]

that's awesome to see how the piston and spark plug work alongside each other like that!

[@Butleger880]

В замедленном показе отличное пособие для демонстрации работы ДВС 👍

[@dmitrykaplun9063]

А смысл? Если человек, без наглядного пособия, не способен понять принцип работы ДВС, то и механик из него не получится. Так, для зрелищноти шоу, нормально.

[@Butleger880]

@@dmitrykaplun9063 Ну механики далеко не все . А в школе на уроке показать будет гораздо интересней чем тупо рассматривать древние картинки в учебнике

[@qawdes9038]

Не всех ДВС, а только 2т, в 4т абсолютно другой принцип

[@МаксимМорозов-л6л]

@@qawdes9038 Принцип тот же, расширение при сгорании раскалённых газов.

[@Rom-Zecs]

если хотя бы 1000кс сняли, то да, а то тут пых тут жмых.

[@jrmora6443]

Bro did all this work just to show us firsthand the art of Internal combustion 🔥 what a legend 🤙

[@djmatizzz]

Czekam aż cały simson będzie przezroczysty 😍😍

[@Niraj_kulkarni]

Hi I am high school student In physics there is topic of engine My professor showed this video I get an idea of how real engine works and saw a practical of it Thank you for doing this

[@racesanchezsanchez5395]

Мужик ты просто супер! Твой дети будут очень счастливы! Слов нет! Одни положительные эмоции! Так держат! С твоей смекалкой тебе море по колено и горы по плече!🤘👍🤘👍🤘

[@Cortemilionário190]

Next, Stone piston

[@buggsbunny01]

Might be impossible right now idk if you could get stone that smooth

[@Merouanii]

Plastic or wood piston

[@matheustoddynho]

@@buggsbunny01 mármore, você pode deixar o mármore muito liso, porém é muito pesada

[@K50ATTACK]

thermite piston!

[@straight_intro]

Cast lava block

[@Saharuddinssos04]

Setiap detik memang banyak pembakaran pantasan oli cepat di ganti jika jarak motor di tempuh cukup jauh dan kalo ga jauh naik motor jangan sering ganti oli cukup seadanya di pake😊

[@schrodingerswolke8619]

Das ist so geil, mehr Einblick geht glaube ich nicht, vielen dank für dieses lehrreiche und sehr unterhaltsame video Ich kann mir gut vorstellen wieviel arbeit das ist, tolle Arbeit vielen vielen dank

[@TheExplosiveGuy]

Lol I saw you holding that block on the drill press and the first thing that went through my mind was "that's friggin sketchy" and not one second later it breaks loose🤣. My years as a machinist have taught me that's a _really_ bad idea, you never hold your workpiece with your hands unless it's a big part and very small drill, fingers have been lost and wrists broken by this sort of thing, be careful... Awesome video though, it's beautiful watching a see-through engine run.

[@Jump-n-smash]

One of the coolest videos on KZbin.

[@evgensha]

Отличный эксперимент увидеть вживую изнутри двигателя, как он работает!

[@JamesBrown-ux9ds]

I think you know whats to do next: Drill the size of cylinder bigger in diameter and insert a glas tube correspondingly. And of course holes for the ports need to be machined to the glaszylinder at the right positions as well. Maybe the glastube may come out of a very cold fridge and shrink fit into the slightly warmed cylinder with the increased diameter. (But first of all i would go to a glasmaker and tell him about my idea, he will have further advice. Maybe supply of chemical firms as well may know more about glas cylinders with best most precise cylindrical inner bore.) And you could try to insert a camera sideways into a newly made camera bore in the cylinder or head as well - to try to make clearer close up fotos in slowmo. Thank you for sharing!

[@stuntmedia4657]

I think he needs to drill holes around the cylinder to create path for a liquid coolant to pass through and cooloff the combustion overheating

[@chuckyboy6977]

@@stuntmedia4657 my thoughts exactly, as it just a display item a scondary system cooling system. Use maybe a large chilled reservoir of distilled and filtered water and the water may not be visible in the cylinder head.

[@murdock6450]

This is what youtube is all about.. showing us mega things like this. Brilliant.

[@pawewarzecha413]

Podziwiam zapał. Fajnie wyszło, brakuje tylko super szybkiej kamery.

[@krystiankrychu2507]

na kanale warped perception mozesz w slo mo obejrzec

[@yeimerortega7522]

@@krystiankrychu2507 what language is? ruso? or germany?

[@fajex]

​@@yeimerortega7522 poland

[@МИРУ-МИРНЕТВОЙНЕ]

Исключительно красивая и качественная работа! Уважение талантливым мастерам! Спасибо за прекрасное видео! Долговечность мотора, в данном случае, не главное. Главное - навыки, знания и светлый ум!)

[@имяфамилия-т3ж1ц]

нахваливаешь шлак?

[@evequim]

Fantastic! Congratulations.Every Mechanical Engineering universite must have this engine tô show.

[@rcmunizzbiguptp4473]

EU SEMPRE QUIS VÊ UM MOTOR FUNCIONANDO ASSIM, EU JA HAVIA PROCURADO NO KZbin, MAS NÃO ENCONTREI NENHUM VIDEO. ACHO QUE O DE VOCÊS É O PRIMEIRO, PARABÉNS. ESTOU ENCANTADO COM O SEU TRABALHO. MEU SONHO É TRABALHAR NUMA RETIFICA. 🥰. MAS NÃO TENHO EXPERIÊNCIA, MAS APRENDO TUDO E RÁPIDO.

[@Algee1998]

Faszinierend, wenn Menschen ihr Handwerk so perfekt beherrschen. Respekt!

[@chris_600rr5]

Nichts ist unmöglich, Chylo. :D Super Arbeit!

[@Forsemus]

Молодцы 👍👍👍 Многие знают как работает ДВС.Но как происходит процесс непосредственно внутри цилиндра видели единицы.Теперь благодаря этим умельцам процесс работы ДВС визуально увидели и мы.👍👍👍👍

[@mohamedhamza2199]

This man is not a mechanic his an artist ❤❤❤

[@bootz0409]

I'd say he's more a surgeon. ❤

[@IkerConner]

Świetna robota!! Fajnie było to zobaczyć . Podziwiam zapał. Fajnie wyszło, brakuje tylko super szybkiej kamery..

[@jrdejuninho]

Muito bonito de se ver, embora o resultado já era de se esperar. Muito lindo ver um motor funcionando

[@tahep3906]

you've done a great job, thanks for this magnificient work, I think this kind of engines must be used for teaching purposes at driving license courses for clear grasping how an engine works

[@akutelkomsel-jf5lb]

Luar biasa untuk sebuah pengerjaan yg sdh terprediksi sebelumnya. Mencobanya,bukanlah sesuatu yg disukai banyak orang

[@Александр-с3э6ь]

Это был очень тя желтый труд. И у вас всё получилось ! Это невероятно интересно. Подобное надо внедрить в производство, конечно доработать качество материала. Зато как здорово, не нужно выкручивать свечи для проверки её работоспособности, всё ВИДНО ХОРОШО ! КЛАСС !!!

[@kotiara9996]

Проделана колоссальная работа,с меня лайк, приятно смотреть,желаю успехов в продвижении канала🔥👍👍👍👍👍

[@Alex1One]

Ребята, это ШЕДЕВР!!🔥🔥🔥👍🏻

[@Olly_2t]

really nice ahah, we want a TRASPARENT PIPE

[@paulanthonymarkowski7518]

Awesome job guys!! Very impressive indeed. Great to see how a small engine works in all its glory.

[@lutzkrause1873]

Hätte nicht geglaubt,daß es funktioniert. Super gemacht. Absolut Spitze. Ich bin fasziniert. ❤❤❤❤

[@herbertmayerle6704]

Jungs,geile Idee und Umsetzung. Beide Daumen hoch😊 Bei mir seid ihr für den 2-Takt-Nobelpreis nominiert😊 Grüße aus Schwaben

[@chrisd5798]

Génial!!! Vous pouvez être fier de vous! Quel formidable support pour expliquer le principe du moteur 2T à des élèves étudiants en mécanique ou autre !!! Bravo...

[@Nic0_0]

Ты смеёшься мне 12 лет и я знаю как работает 2T 4T моторы и как работает Роторный Двигатель

[@chrisd5798]

@@Nic0_0 Si à 12 ans tu maitrises les principes du moteur 2T/4T alors bravo à toi, je suis sûr qu'il te reste encore des tas de choses à apprendre dans cette discipline...Continue ! ;)

[@ubertcoolie8694]

this has got to be the coolest video i've seen on youtube

[@Азазелло-ю3ж]

Очень аккуратная работа! Молодцы, ребята! Продолжайте дальше!👍🤝

[@progaragechinskiemotorki]

moje pierwsze próby wiercenia w akrylu były kiepskie :D dużo poleciało zaklęć i w końcu nie pękało

[@sonnguyencong4361]

Tôi nghĩ rằng khi chạy nâu thì không chịu nổi vì bu ri nóng lên làm chảy

[@aguilacons6323]

Your very intelligent Bro...your a Scientist .... I appreciate your advance knowledge . God Bless you...

[@TheColorsInGreyLife]

Using a basic tempered glass sleeve that you make have vertical and horizontal grooves in it will allow for it to survive the heat issues for longer, especially if you can cool around it with clear fluid. I think the horizontal might be perfect for a pump that you have for holes around those areas, that go with the piston movement. You would be able to pump fluid to the sides and use basic air cooling with some glass fins. You would need to make it thick enough, the sleeve, but also have it have something of a curve or bend to stick into the head and a bottom separate part to be able to have it stay put. So you could have cooling, a less expanding and higher friction clear part, it will heavily rely on the tempered glass thickness and the sizing of all the grooves. It would last much longer and maybe even be a viable 2 stroke engine.

[@agorpb5871]

Borosilicate glass.

[@GS-1982]

Jak by ktoś mógł wam to ze szkła zrobić. To był by motyw . Kawał dobrej roboty :)

[@Wilma5532]

Ze szkła borokrzemianowego

[@комубензза55]

@@Wilma5532 Дякую !)

[@igrai_po_tabam]

Сколько труда вложено в это видео...

[@DiegoEreno]

Eh sì hai proprio ragione 👍💪🦾

[@kieleccyelektrozomiarze]

Kolejny świetny film :) Zdrowia i smacznej kawusi życzę

[@maximseliverstov1921]

Вот это реально круто. Вот таким мужикам лайки надо ставить в интернете. А не тем, которые кривляются на камеру

[@dr.chlubicz3585]

Ale ogień! Gratulacje, super się ogląda.

[@winstondippenaar1006]

I wonder whats the mileage before it overheats and melts😂😂😂

[@PH90IFY]

love this, your reaction to it starting and the engine locking up were the best lol lasted way longer than i would think honestly with that heat

[@larsw9734]

Tolle Arbeit ❤

[@angelcesaraltamiranoa.771]

Magnificoooooooo!!!! Te felicito! Muy bonito y laborioso proyecto. Fuerte abrazo desde la ciudad de México.

[@thebrokeway9838]

the trust is amazing I would be so scared to have my face so close to this amazing work of art

[@rodrigobaido494]

Muito bom, o cara é mecânico de moto, torneiro, eletricista.......,👏👏👏👏👏Professor Pardal. Parabéns 👍💯🏍️🛵🏍️🛵🏍️🛵🏍️

[@kamilknopik3785]

Znakomicie to wyglądało jestescie najlepsi👌👍😁

[@Komonoyade]

Wonderful!!!!!!! Hats off to this aesthetic and sense of style!

[@DiogoVieira95]

Parabéns. Foi um belo trabalho. Muito bom ver como funciona o motor 2 tempo

[@lolek1987knz]

Świetna robota!! Fajnie było to zobaczyć 😀

[@ClaudeSac]

That time when even The Slomo Boys were too late. Awesome video!!

[@starikleo]

Классно. Оно того стоило 100%.👋

[@fkgms-crf5553]

Esse vídeo mereceria uma super câmera lenta, seria incrível.

[@wk3009]

Jesteś artystą jak pionierzy motoryzacji. Podziwiam i dziękuje.

[@keltonfoster]

Cool, don't you love it when it comes out how you designed it to do. That slow motion footage of the combustion process is neat. Is that acrylic you used for the combustion chamber and head? Isn't that the only transparent material tough enough to take the pressure and heat? It looked like the aluminum piston had melted there for a second but it was just the acrylic melting some or scratching and the exhaust port that made it look that way. Great video and a great vintage bike to modify like that 👍

[@juanhuertas8777]

That's great congratulations

[@valdirgimenes2073]

O cara é um gênio, louco, aventureiro, não sei descrever, mais ficou top demais.

[@mwalker63]

one of the most amazing things I have ever seen... Awesome job....

[@IvanBolmashnov]

Здесь слов нет,одни эмоции в хорошем понимании этого всего. Но ни кто ни когда не вспоминает главных разработчиков двух и четырёх тактных двигателей, а они были. Нужно придумать прозрачный металл и тогда жизнь самоделкиных заиграет новыми красками и сюжетами.

[@Fedr440]

Придумай прозрачній металл. Анало говнет получишь!

[@Fatbaiker]

Огонь 🔥🔥🔥🔥🔥

[@SamTheSum]

Millard will surely appreciate. BRAVO

[@dawidprz1217]

Jeden mały błąd podążać dorabiania dołu cylindra. Moim zdaniem jako mechanika i pasjonata Simsona którego także tuningowałem od najmłodszych lat dół cylindra powinien być delikatnie wpuszczony w sam cylinder zapewniło by to lepszą pracę. A tak to super robota.

[@patrosd2336]

człowieku on to wie jest milion razy lepszy od ciebie to miało chodzić tylko chwilę bo się i tak roztopi od temperatury ja nwm czy ty myślałeś że oni będą na tym robić 20tys. kilometów czy co haha

[@przystankowaafka524]

Jestem dumny że jesteś Polakiem✌️✌️✌️

[@ticolla1518]

Egg do trabalhão que deu pra fazer isso. 😄 Parabéns 👏🏽👏🏽😃

[@juanlopezcuspinera1010]

Quedó de lujo felicidades Saludos desde Xalapa Ver. México

[@Chris-un4ns]

Thxz for all your work, that was cool, engines turn lots faster than people know.

[@alekseialekseev3211]

Познавательно даже очень хотя я с детства знал весь принцип работы моторов

[@adamok1154]

No to teraz łożyska i kartery 😂

[@SeniorGymBro-Tom]

You are a Machine of a Machinist! Great Video!

[@Kamil5300]

Cześć! zajebista robota. Jaki to olej w skrzyni?

[@jaszkowaenduroteam9013]

zielony, to możliwe że to motul 300v

[@mickg7299]

Pity we can’t make fully transparent politicians, that really would be something.

[@PostcardsfromAlaska]

Or with a shorter duty-cycle, like this engine.

[@limax8800]

Richtig geil. Man konnte die Funktion und Aktivität des Kolben super erkennen und beobachten. :D

[@pauloricardodambiski863]

Muito didático, parabéns!

[@voxxxapiter4564]

Гильзу нужно из стекла, Лайк 👍 и коментарий в поддержку канала,

[@FedeLouit]

I love to see the way of work from this 2 stroke engine! AND also love when you realize that! HAHAH congratulations

[@MrValentinoxx]

Muito bom em 👏👏👏

[@Grzechu0]

teraz kartery przezroczyste

[@mayankpandey6539]

That's one of the most beautiful things I have seen❤