Bmw Exhaust Flex Repair, In-Situ Pipe Repair With No Welding. 3 Series 318D, 320d 118d 120d 520d

[@Samir-stjohn]

This is one of the greatest car repair videos I've ever seen in my life. Thank you so much!!

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@Flint_Westwood]

My 320d started exhibiting the same issue this afternoon. Not checked the downpipe Flexi joint yet but I'm fairly confident that's what it is. Cracking video 👍

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@Flint_Westwood]

So I thought I'd post an update. Turns out, the issue I had wasn't what I thought it was. Instead it was the Dual Mass Flywheel. Had that and the clutch replaced 👍

[@charlenepoole8576]

Brilliant repair, must be satisfying knowing its done properly & saving an absolute fortune in a labour costs bill 😀

[@aaanton11]

The new pipe went on like a dream and it was well made, 👍🏻 Thanks for the great comments👍🏻👍🏻🛠

[@connorcox3456]

😂😂

[@jaifield2612]

Nice one... Have the exact same problem (not quite as badly deteriorated) will be using this guide to do mine.. was quoted £585 at BMW today!

[@aaanton11]

ouch! diy it is, Thanks for the great comments👍🏻👍🏻🛠

[@SimmJimm]

Cracking video that. I have exactly the same thing, so obviously quite a design fault with that exhaust. I thought exactly the same, I could hear a slight blow when I switched the engine off. I received quite a surprise when I jacked the car up and saw the main exhaust part had completely broken away. Many thanks for that!

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@bizling]

Mine has been like this for a year now, naturally I've bodged it enough to pass an MOT.....new cross brace (source of vibration into the car) with a piece of wood bolted through the cross brace, then went to Halfords and got generic radio install holed brace/mount strip to wrap around each end (same location is broken on mine) and then 'pulled' the lot together then bolted, finally wrapped up in aluminium tape for the MOT test. Not proud but I will fix it properly now. It's having to touch all of the undertray screws that wind me up, always a nightemare! In terms of release agents, I use SeaFoam Deep Creep and most recently, Normfest Super Crack (should have got this yeeeeeeeeaaaaaarrrrrrsssssssss ago). Great video thanks!

[@aaanton11]

I will Give it a go, Thanks for the great information👍🏻👍🏻🛠

[@iwishcolincampbell1541]

Good job mate . You got right part . I got an msport unfortunately they kept sending wrong size so ended up welding it on what a job that was.

[@aaanton11]

I bet, Thanks for the great information👍🏻👍🏻🛠

[@DailyNevFacts]

What issues did you have with your m sport mate? I have the same issue. Have a bmw 116 m sport 2010. Ummming and urrrring on whether to get this part. What did you have to weld?

[@cd27idw]

Astounding( and brilliant). current price to replace the unit containing the flexi pipe is £2500 vs £20 for the pipe alone.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@ZwM7]

Mate what a quick fix!! Last week i had same problem my exhaust get disconnected during fu....ng 1200km travel on high way at night!!! but disconnected higher than Yours closer to DPF and that's saves me because all exhaust hang over bottom engine cover f... lucky me.... But who's know Germans high way had a speed bump.... yes speed bump on High way with speed reduced only until 60km/h for M-Pak suspension was too hard... Peace Out BMW freaks!!

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@hotchilli2525]

Fantastic job,I now know the whole process to do my X1 tomorrow. Very clear discription.

[@aaanton11]

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

[@chrisp4899]

Car looks good on the new wheels and springs 👌

[@aaanton11]

👍🏻 I like the stance, Thanks for the great comments👍🏻👍🏻🛠

[@No.Handle31]

Just want say thanks posting this video. I had to do this on my X1 which is a 3 series with a different body. It's weird they snap in the exact same place.

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@renauddubois3553]

Thanks for this nice video, I have exactly the same issue. I was able to unmount the part on the exhaust side without heating, just with some tools and but unscrewing the bolt. The repair kit I ordered from ebay (everyexhaustpart) has only one clamp. The size is the same as original. I was able to reuse the old clamp (from the side to the exhaust). I was hard to cut the metal. There is not that many space and I cut too closed to the dfp. I put enough paste. It takes a long time to dry (manual says 30 minutes but it takes longer for me).

[@aaanton11]

Great job Thanks for the great comments👍🏻👍🏻🛠

[@nagaiah.ramaiah]

I too have a broken flexi on my x1 and Was told by a garage that the whole DPF and flexi assembly needs replacement as they can't clamp or weld the flexi as this will cause MOT failure as it would be hard to prove dpf filter wasn't tampered during the replacement

[@aaanton11]

What a load of rubbish, they have to prove the dpf has been removed not just guess, Thanks for the great comments👍🏻👍🏻🛠

[@rickypatel5591]

I have the flexi broken on my 05 e61 530d used the same company as you did but they didn’t send clamps just recommended spot wield Just need to find out which clamps will work best

[@aaanton11]

Just measure the diameter of the repair clamp, Thanks for the great comments👍🏻👍🏻🛠

[@adrianbutler6841]

Great video, showed in good detail, looks a good replacement

[@aaanton11]

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

[@ChrisUKFF]

Great video, going to be trying this repair on my 2012 318d this week. I've just ordered all the parts.

[@aaanton11]

Good luck! Thanks for the great comments👍🏻👍🏻🛠

[@markoknezevic7614]

How did it go?

[@ChrisUKFF]

@@markoknezevic7614 it went well. I was doing it on the floor so was quite tedious getting appropriate access with the grinder but managed in the end. If you have access to proper ramps or a lift I’d highly recommend.

[@markoknezevic7614]

@@ChrisUKFF appreciate the answer, and I'm glad it worked for you! Did you get yours from amazon or ebay as the two are different. And is yours an Msport? Apparently they have different dpfs

[@crazywelder3510]

Top job fella 👍 mine needs doing been putting it off for weeks you made it look easy

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@simonmoakes]

Brilliant video matey. Helped with fixing up my E82 massively. Thanks for posting it!

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@Smart_fix]

Nice one mate looks beautiful 👍🏼 I’ve got same problem with my bmw which is making noise so badly it happens 2 days ago in morning when I start my car and blown off 💐👍🏼🙂

[@aaanton11]

Sorry to hear that, this is a great repair, Thanks for the great comments👍🏻👍🏻🛠

[@Smart_fix]

@@aaanton11 you’re welcome and thanks for respond and sharing 👍🏼❤️💐🙂

[@lewisbradbury4832]

Please could you help me get my e91 back on the road, I followed your wheel bearing video with magnetic pick up bearings, and now I have abs/dtc faults! bearings in the right way, new ate sensors and absolutely no change! 😢

[@aaanton11]

the bearings are not the magnetic type, the sensors are picking up on the rings which are on the driveshafts, watch this video kzbin.info/www/bejne/n5-2f3SVndqfqqs Thanks for the great comments👍🏻👍🏻🛠

[@lewisbradbury4832]

@@aaanton11 i know i just meant i followed your way of pressing them in, bought the tools from the description. mine are the ones with active steering style abs sensors with magnetic abs ring in the rear of the bearing itself. but now i have some crazy goings on until i remove the abs sensors. mental.

[@spencerhulme1203]

Fantastic documentary Anton and brill Job, thank you also for showing where to get the parts - that job you did if taking to the garage costs between £360 and £500, the biggest cost of all is by not watching Anton and i do regular. Cheerio

[@aaanton11]

Thanks Spencer really appreciate the comments have a cracking day 👍🏻👍🏻🛠

[@alex_c_roman]

Very good quality video and repair. Keep the 318 videos coming 👏

[@aaanton11]

Thanks, will do! & Thanks for the great comments👍🏻👍🏻🛠

[@Mr_Chuz]

The flexi you show in the video from Amazon is a weld on one and pretty low quailty

[@aaanton11]

The amazon one uses the slip ring to grab the dpf to clamp to, no weld required, but this is the link to the one I used "Search eBay Every Exhaust Part, BMW 320D Exhaust Flexi Flex Easy Repair DPF, Cat Pipe, Catalyst Stainless." Thanks for the great comments👍🏻👍🏻🛠

[@Mr_Chuz]

@@aaanton11 I could understand if there was a matching flange on the new flexi but I can't see how the ring would hold the new flexi in place and support the weight of the exhaust?

[@dmyers2105]

Top job that 👏 attempting mine this weekend thanks for the vid will help alot 👍

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@tonyhealey8977]

Was there any codes showing up. My flexi is showing early signs of wear and is quite flexible. I'm thinking if gases are leaking could this cause maf sensor out of range fault p0101.

[@aaanton11]

No the flexi is after the sensors, Thanks for the great comments👍🏻👍🏻🛠

[@kianward5999]

that is a smashing job done fair play to you pal great camra and great content and saved your self a nice few bob good on you 👍👍

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@liamrochford3649]

Top job and a very good video, thanks for the detailed instructions. 👍

[@aaanton11]

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

[@philking4753]

Nice job mate just ordered my replacement flex 👍

[@aaanton11]

Good choice! Thanks for the great comments👍🏻👍🏻🛠

[@MichaelCook-s8i]

Just been doing mine well the wife's, just waiting for a die grinder to get at the top, did you cut your heat shield off the cat as mine comes right down and it's in the way from getting a clamp around the front

[@aaanton11]

I did not need to cut the heat shield, Thanks for the great comments👍🏻👍🏻🛠

[@BMWguru]

My 420D has the same issue, will this repair work on F series Chassis? Mine is a 2015 model

[@aaanton11]

Check the company information in the details they supply for all different manufacturers and models. You should be able to find on your car in there. Thanks for the great comments👍🏻👍🏻🛠

[@mohammadalidris9886]

Hello I have the same problem my car also like yours car is BMW e91 Touring, I have your video similar and was very good and clear but I had why is the head exhaust flex pipe ? because I'm afraid that by its otherwise broken?

[@aaanton11]

The end is flexi to absorb vibration, Thanks for the great comments👍🏻👍🏻🛠

[@brycebrown1]

Great video! Great fix! Mine when very quickly, what a noise! Sounded like a bag of bolts!!

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@ghanoomsosi6355]

Hi mate I got series 1 and the exhaust smoking Do you think I need to change the pipe same what u done Thanks

[@aaanton11]

Shouldn't be smoking, must have another issue, Thanks for the great comments👍🏻👍🏻🛠

[@OneTruth1]

I have the same issue alot of the garage guys saying needs welding confusing you done it superb.

[@aaanton11]

With this kit no weld needed, Thanks for the great comments👍🏻👍🏻🛠

[@marcbull3665]

Hi, I have the same issue. Will this work on an M sport 320D as I've been told its shorter? Already sent one back as it didn't fit. Thanks

[@aaanton11]

If you message the company through the link in the video description they will confirm fitment, Thanks for the great comments👍🏻👍🏻🛠

[@normsmowers4758]

Beautiful job mate great video 👌👍

[@aaanton11]

I was really pleased with the outcome, Thanks Norm for the great comments👍🏻👍🏻🛠

[@rjchohan]

Hi Aaaton, I am pleased to see your video on how to repair Exhaust Flex Repair. I have BMW 118D M SPORT E87/N47 2008 5 Door Hatchback. I logged on to the Ebay (seller/dealer) - everyexhaustpart to buy the Exhaust repair section. The Ebay seller stated to contact them IF I HAVE A M SPORT, and Ebay part seller had to say this (Unfortunately we are not sure if these are suitable for the M Sport systems, We have had some customers who fitted these no problem whereas others had issues so we cannot be 100% certain. I can send you the measurements of this part if you are able to check against your exhaust? It's usually the DPF end which is the issue, It's shorter on the M sport System so may need to be welded rather than clamped) I would like to know if you had any problems/issues if you had to repalce this Exhaust part on BMW 118D M SPORT MODEL. I would appreciate your response to this querry.

[@aaanton11]

I have fitted one to an M sport 318, with no issues at all. It was identical to the one in the video. Maybe some of the 320 M sports are slightly different Thanks for the great comments👍🏻👍🏻🛠

[@markoknezevic7614]

​@aaanton11 do you know the year of the 318d you fitted this to? I have a 2011 318d m sport and I'm looking to buy the ebay one.

[@davidga6272]

Did you notice smoke fumes on the interior and black soot over the motor?

[@aaanton11]

No just a vibration, Thanks for the great comments👍🏻👍🏻🛠

[@joeyjones6638]

Nice job again pal Just a thought when you got the flexi pipe bit of the end of the DPF there was good access into the filter itself Perfect for drilling a few nice half inch holes in there What do you think rather then having to take it completely off 🤔

[@aaanton11]

Yes it would work, but I would want to get more material out, to save any break up bits coming off and blocking the exhaust, Thanks for the great comments👍🏻👍🏻🛠

[@iulianpvl4278]

Thank you for showing this video! You know what diameter was the pipe on the DPF side ? I am asking because on the original part on the DPF side is showing 55mm pipe, so if it's 55 mm how was possible to join them together ? Can you tell me please the dimensions in the left and the right of the pipes and the lenght of the part you installed?

[@aaanton11]

Links to the parts are in the description, I will have a look next time I jack the car up Thanks for the great comments👍🏻👍🏻🛠

[@batishmirza2324]

Hi i have 118d n47 e81 will this be the same precedure as what you have done 👍

[@aaanton11]

Yes it will, Thanks for the great comments👍🏻👍🏻🛠

[@richtfingers]

Excellent video and well put together!

[@aaanton11]

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

[@cedric7016]

I ordered the kit you mentioned for my ‘11 318d N47 but it doesn’t really looks like yours. Also the diameter is way too small so the flex pipe is really loose and just falls out of the oem dpf with the clamps tightened… Really nice “quick repair” when you need your car asap on the road 😢

[@aaanton11]

Maybe they sent the incorrect part, Thanks for the great comments👍🏻👍🏻🛠

[@cookingwithdan2649]

Did u find it gave u more turbo whistle and diesel smell with abit of hissing

[@aaanton11]

Yes when it was broken, Thanks for the great comments👍🏻👍🏻🛠

[@davenaylor8076]

Lucky the mesh was still hanging on. If it had snapped, the pipe may have speared into the ground. Would have cost you for a new pipe as well as the flexi. Just in time!

[@aaanton11]

Yes it could have been far worse, Thanks for the great comments👍🏻👍🏻🛠

[@swoogles4093]

When I let the clutch out and let the RPM hover around 1000rpm I hear a rattle noise, definitely something heatshield/exhaust sounding. Mine is an F20 116d.

[@aaanton11]

possible this is an issue Thanks for the great comments👍🏻👍🏻🛠

[@DimitrisSfounis]

I came to your extremely well made video looking for answers for another problem I'm having with my 2003 530d. It's leaking oil right where the flex hose (the braided one) meets the exhaust pipe. Is there a seal there, that can fail?

[@aaanton11]

If oil is dripping out of the exhaust I suspect the turbo is at fault, there must be a lot of smoke from the exhaust, Thanks for the great comments👍🏻👍🏻🛠

[@shaymc1977]

Will WD-40 do on the pipe if you don't have a blow torch..

[@aaanton11]

Give it a bash Thanks for the great comments👍🏻👍🏻🛠

[@shaymc1977]

WD-40 and a hammer worked 😂 thank you for the video.

[@Politicallyincorrect1984]

Was you smelling gases in car? Mine has a strong smell of exhaust fumes im suspecting something similar

[@aaanton11]

No smell for me just vibration, Thanks for the great comments👍🏻👍🏻🛠

[@trtmrt5963]

Does anyone know what wheels and spec are yhose?

[@aaanton11]

here's the video kzbin.info/www/bejne/qHekmnmfer-Uga8 Thanks for the great comments👍🏻👍🏻🛠

[@yoanndelemer5525]

Hello, i'm french. what are the diameters of the tubes of the flex purchased on ebay? I think that the amazon's flex in not the same as on ebay. Thanks.

[@aaanton11]

Let me check, Thanks for the great comments👍🏻👍🏻🛠

[@yoanndelemer5525]

@@aaanton11 Hello, Do you have the information? My flex is broken and my car is very noisy!! Thanks.

[@nobukotomo]

What brand of shock springs are on the car

[@aaanton11]

Lowering A BMW 3 SERIES E91 E90 WITH EIBACH PROKIT SPRINGS, Should Have fitted SPORTlINE Kit kzbin.info/www/bejne/e6KXaZtqqZWYbtU This is the video on the suspension Thanks for the great comments👍🏻👍🏻🛠

[@jamescoupland131]

Fantastic video I am doing the same job on mine tomorrow 😢

[@aaanton11]

You can do it!! Thanks for the great comments👍🏻👍🏻🛠

[@jock6091]

Amazon link is now different part one that needs welding, also would there still be enough pipe left on dpf if i was to cut the lip of instead of grinding it down or would it leave it to short, great video btw

[@aaanton11]

Need to grind down, this one doesn't need welding amzn.to/3ohhd9b but there is also this Search eBay "Every Exhaust Part, BMW 320D Exhaust Flexi Flex Easy Repair DPF, Cat Pipe, Catalyst Stainless." Thanks for the great comments👍🏻👍🏻🛠

[@tastas3331]

You have done nice smooth and great job i loved it 👍

[@aaanton11]

Thank you very much! Thanks for the great comments👍🏻👍🏻🛠

[@tastas3331]

@@aaanton11 You are very welcome 🙂

[@zeeuk6163]

Great job mate mine flexi got noise to any recommendations I'm in Essex

[@aaanton11]

Links are in the description Thanks for the great comments👍🏻👍🏻🛠

[@cookingwithdan2649]

Also could i have the link mines a 2011 320d lci

[@aaanton11]

Exhaust repair section, Amazon £30 amzn.to/3ohhd9b Or Search eBay Every Exhaust Part, BMW 320D Exhaust Flexi Flex Easy Repair DPF, Cat Pipe, Catalyst Stainless. Thanks for the great comments👍🏻👍🏻🛠

[@jamiesansom4760]

Where abouts did you place your axel stand that position looks loads more comfy than using the jacking point right in the way ? ..... great guild cheers 👍

[@aaanton11]

On the sub frame, Thanks for the great comments👍🏻👍🏻🛠

[@tomyoung154]

Hi mate, really helpful video. What was the paste you used please?

[@aaanton11]

This stuff is great tom amzn.to/3uQtMMR Thanks for the great comments👍🏻👍🏻🛠

[@johnsmoke6867]

Hello, very good job, have you Ebay link for this FLEXI ?

[@aaanton11]

links are all in the description Thanks for the great comments👍🏻👍🏻🛠

[@IanBall-z4x]

Hi, would anyone out there have fitted a Flexi pipe to a 320d 2017 reg. I have tried a couple of the eBay sites and not getting very far with a match. Any help greatly appreciated

[@aaanton11]

Give these guys a message they will sort you out [e-mail] Thanks for the great comments👍🏻👍🏻🛠

[@QuattroBajeena]

I got those same wheels on my E92.... But I got 18s. One of the best choices I made apart from the kerb rash. Lol That exhaust repair. I better sort mine out. Before this hsppen s.

[@aaanton11]

I did this video on them kzbin.info/www/bejne/qHekmnmfer-Uga8, love the look, Thanks for the great comments👍🏻👍🏻🛠

[@CinkersR]

That's a hell of a job but works like a charm :) Thank you so much - I'm going to do the same because I can hear already some noise out of this pipe. Could you please just let me know where you put the stands that car is holding safe without the trolly jack? I've got always a problem with that in my E91... Doesn't look safe and I always leave the jack as well which makes such repairs much harder in terms of movements etc... THank you !!!

[@aaanton11]

when the under tray is off any where on the main subframe is ok Thanks for the great comments👍🏻👍🏻🛠

[@Leo-di4gj]

Nice work and nice video, I have same model 2009 e92, but I'm not sure if I have exhaust leak with it or not, but comes a wired smell from engine room. Is it exhaust leak? Cuz I have checked cooling system, fuel system and engine, everything was fine. So what you thinking about that?

[@aaanton11]

It could be a few things, ie the clutch, air con compressor, binding brake or the exhaust, Thanks for the great comments👍🏻👍🏻🛠

[@Leo-di4gj]

@@aaanton11 thanks for info, but my car is automatic, could be clutch? But I think from last 2 things you said, Exhaust or break binding:)

[@usmanmahmood7067]

What size is the U clamp exhaust size

[@aaanton11]

if I remember right it is 51mm, Thanks for the great comments👍🏻👍🏻🛠

[@phoenixosprey7455]

Have you had any excessive vibration from a broken exhaust flex pipe?

[@aaanton11]

That is the first thing I noticed, the vibration, it wast very noisy the DPF acts as an exhaust silencer. Thanks for the great comments👍🏻👍🏻🛠

[@HarleyN93]

Did ya get 2 new clips for it? Or just 1

[@aaanton11]

2 clamps front and back, Thanks for the great comments👍🏻👍🏻🛠

[@logun94]

Has anyone else fitted this to thier car and ended up with a strong fume smell in the cabin My flexi snapped and then I ordered this kit and it was fitted by the garage, ever since then there's been a really strong fume smell in the cabin It's been back to the garage and they fitted a new clamp around the turbo-dpf side of the exhaust and it fixed the problem a bit but not completely

[@aaanton11]

I had no issues, Thanks for the great comments👍🏻👍🏻🛠

[@jamesarmstrong4526]

Where did you purchase the replacement flexible pipe?

[@aaanton11]

Exhaust repair section, Amazon £30 amzn.to/3ohhd9b Or Search eBay Every Exhaust Part, BMW 320D Exhaust Flexi Flex Easy Repair DPF, Cat Pipe, Catalyst Stainless. Thanks for the great comments👍🏻👍🏻🛠

[@martinsmith-ch7cb]

What reg is yours?

[@aaanton11]

2010. Thanks for the great comments👍🏻👍🏻🛠

[@piovo1]

Flywheel sounded abit rattly when you started it whilst camera underneath

[@aaanton11]

It was replaced 4 years ago, I think the timing chain is the more likely noise, will need replacing at some point, Thanks for the great comments👍🏻👍🏻🛠

[@piovo1]

@@aaanton11 these engines are great to be honest, apart from the timing chains there aint alot of cars in the price range of these that can easily do 50mpg £30 tax and has some power really.

[@richsheridan4029]

Hi ant it's really hard to read the eBay 'l ink for the pipe could you print it in the comments thanks for a great and helpful video great job mate 👍

[@aaanton11]

Exhaust repair section, Amazon £30 amzn.to/3ohhd9b Thanks for the great comments👍🏻👍🏻🛠

[@pal555]

Sparks and a flame good job it was a diesel I wouldn't attempt that if it was a petrol car being close to the tank nevertheless was a good job 👍

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@thomasstiglich3484]

Great video. Thanks!

[@aaanton11]

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

[@marchorsfall2169]

Just saved me 150+ so thank you

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@marchorsfall2169]

Is this car a m sport?

[@checkbmw]

Nice man, good job 👍. How do you films under car? Gopro on small stand? Thanks

[@aaanton11]

This was all filmed on an iphone12 pro on a manfrotto pixie tripod, Thanks for the great comments👍🏻👍🏻🛠

[@georgebeaton4544]

Great job 👍🏻👍🏻👍🏻

[@aaanton11]

Thank you! Cheers!

[@matthewplowman8562]

Hi. Is this still holding up ok?

[@aaanton11]

Yes like a dream, Thanks for the great comments👍🏻👍🏻🛠

[@robmcfarlane8076]

Cracking video

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@johanneshall2840]

Thanks for the help💪🏽

[@aaanton11]

Happy to help, Thanks for the great comments👍🏻👍🏻🛠

[@scilor]

Why you don't just remove the DPF. The screws are easy to remove, and the plugs get off pretty easy without problems. This saves time in total and you'll have space to work on the flex.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@drugbedevictorahiaba2604]

Can you please do this job for me?

[@aaanton11]

Sorry I am stacked out at the moment, Thanks for the great comments👍🏻👍🏻🛠

[@zsozso92701]

Szia. Nagyon szép munka :-)

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@Christophergriffiths1972]

Nice job!! 👍🏼

[@aaanton11]

Thanks for the great comments👍🏻👍🏻🛠

[@stevesibson9921]

Do you want to fix mine 😅

[@aaanton11]

I am too busy, Thanks for the great comments👍🏻👍🏻🛠

[@busancun]

The design of the exhaust for this model is really a nightmare for the DIY mechanics. If you had got a welder, it would have been much easier than this.

[@aaanton11]

Thanks for the great information👍🏻👍🏻🛠

[@Lilmonkmonk]

Spotty dog!

[@aaanton11]

🐶Thanks for the great comments👍🏻👍🏻🛠

[@connorcox3456]

Crap repair in my eyes. Needs to be welded properly. Not enough holding it onto the dpf pipe. Cheap isnt better in this case.

[@aaanton11]

Its never let me down, still attached, and when I needed to do the timing chain, kzbin.info/www/bejne/fJvdl3WNZrJ2o7s I separated the joint which saved loads of issues, Thanks for the great comments👍🏻👍🏻🛠