How to replace exhaust flex pipe.

This video shows you how to install, change, replace a universal exhuast flex pipe permanently. This video is applicable to the 2005 Chevrolet (Daewoo) Tacuma (Rezzo).
181214

[@oxygen7955]

I just paid $257 for one installed on a 2013 Ford Explorer v6 3.7L . Great video!!!

[@aj2090]

I have none of those tools so I just danced to the beat.

[@amoldhillon1445]

haha

[@mr2seis388]

All the way to the bank to pay the flexpipe bill 😂

[@malikgordon9212]

I guess Im asking randomly but does someone know a trick to get back into an instagram account? I stupidly forgot my login password. I love any tips you can offer me.

[@bensonkayden9346]

@Malik Gordon Instablaster ;)

[@malikgordon9212]

@Benson Kayden i really appreciate your reply. I got to the site through google and im trying it out now. Seems to take quite some time so I will reply here later with my results.

[@lalotzul6709]

You did a Good job. I Like that you replaced it on my car. Someone did it, but I don't like it. He didn't like you do. 2:42

[@coreUTube]

Just got my flex pipe replaced and wanted to see how it was done, Thanks.

[@jaspalsinghrupra617]

How much is it please thank your

[@marcoshved9598]

​@@jaspalsinghrupra617I had my car diagnosed they said 1k lol I was like nah ill buy the pipe for 30 and fix it thanks tho might be fun here in a bit

[@sweeney69728]

brilliant the first tool I never seen before I'm shocked

[@stainlesssteelexpert]

I like all the tools you use.

[@robroy759]

Excellent video. No stretching the video time out. Showed how to do the job succinctly. Now subscribed. Thank you

[@symcardnel1741]

Nice job and video!! I need to change that whole section and was hoping to see how in connected moving to the rear from the flex pipe area.

[@juanagudelo409]

You made this look so simple 😂😂😂, it took me a whole day to do this.

[@fuffoon]

The level of attention to detail that I want to see on my car. Its time for the flex pipe.

[@helmet098]

Ok so I just need a lift, a welder and about 15 years experience. Got it

[@rixlee4776]

You can just use exhaust clamps I would imagine

[@Geronimo_Jim]

Cheap ramps, a second hand welder and patience. Still cheaper than a muffler shop

[@DarkRaen666]

Or a measuring tape, a jack, JB weld exhaust tape, some exhaust U clamps and about 20 minutes

[@shidzngigglez]

😂 True

[@emilydiaz8886]

Ik right I was just about to get mad I paid for this at the mechanic lol

[@incognito-yj4gu]

Easy repair. Now all I need is a lift in my garage !

[@marksteele45]

Where did you get that tool???? I never saw a pipe cutter like that for exhaust systems! I have a big one for plumbing.

[@markalan4026]

I remember going into a parts store years ago and asking for some of this flex pipe, they told me it was illegal to sell lol.

[@eligreg99]

You can literally buy them at Autozone it’s not illegal lol

[@markalan4026]

@@eligreg99 I know that now, but I was a young ignorant kid at that point. The thing is, I think I may have said something about bypassing a catalytic converter. If so, that would explain it lol.

[@rb2268]

Yep depending on the state. Not legal in MA. Inspection shop will fail yoyr car when they find it, or any other of the tinyest leaks in the exaust. So no mufler clamps eighter, they leak they fail.

[@iyaramonk]

How come you added the 2 extra half pipes at the end? Do they actually do anything?

[@yousifbaghdadi7369]

Great job, I love you from Iraq ❤️👍

[@nutslug1]

I couldn't see anything wrong with the old one, mine is frayed at one end where the pipe has been dropped and the wire was pulled out from the edge and I'm wondering if it's an MOT failure even though it doesn't seem to be leaking.

[@jaguarblack4332]

Can I put a exhaust clamp to seal in between the flex pipe and exhaust pipe where it's broken at?

[@thrivingwithmetoday]

guys, it's awesome, I hope I can repair mine with this exhaust pipe cutter, that I ordered, just now 😂however I'll use clamps instead of welding

[@WindsongSoundBath]

What kind of clamps , and can you tell me the type of exhaust pipe cutter to get , or is it just called exhaust pipe cutter ? Thanks .

[@mooauto2388]

Does it affect the fuel consumption ? Because on my Ford explorer there is a hissing sound at acceleration

[@heterosapiens179]

Yes it does! O2 sensor get a bad reading from exhaust gas!

[@Palm0vic]

So if i want to change flex pipe its always by welding ?

[@suburbcinderella]

Where is it located? Towards front or back?

[@cocoyblue]

Hi hope yo can reply soon as possible! That gasket is for Nissan Sentra 2005? And if it is where did you buy it having trouble finding a 3 bolt gasket for mine

[@lalolalo1233]

What are the general symptoms when this part goes bad?

[@ndecker3295]

Exhaust is loud

[@محمدصادقالورافي-ع6ب]

Thank you, but I want this screwdriver, that he is easily dismantling the tube, what is the name of the screwdriver, or from where to buy it

[@iyaramonk]

I believe it's called an impact driver

[@xdanny7080]

With right tools this job seems to be so easy...

[@nepazarolj]

It's True. :-)

[@driversseat1707]

@@nepazarolj Can you read my comment. I had mine changed on my 09 Porsche Cayenne S . The next day it was shaking when I turn it on, the check engine light kept blinking and all types of misfired engine codes came up.. I took it back. What did the do wrong?

[@StopTeoriomSpiskowym]

0:53 that knife for pipes are great

[@John-zo4wu]

That is a good repair, but since you took one end down, why not just replace the entire front pipe? There are probably two more flange bolts on the other end we can't see. Take those out and drop the whole pipe. Save you all that labour.

[@MNIGN56]

It cost about $120-300 more for the entire pipe when you can just pay about $30 foe the flex and weld it yourself. So basically he saved himself about $400.

[@geromesquita]

Show de bola seu vídeo 👍👍👍

[@ralphwhitaker8761]

Does that replace the flow master or did you add that to it?

[@PiedPiperify]

Whered you get the chain pipe cutter tool used to cut the pipe?

[@pdxtown8714]

Now my whole entire flex pipe up by the firewall completely ripped off would that cause bad misfiring

[@taylormadedaydreams6914]

how much on avg would this exact what you do cost for a shop to do

[@YazidZied-jp7ti]

Good job❤

[@hitmen2025]

Can a leaking or blocked catalytic converter cause misfiring

[@Celbrise]

i personally think so. my car running a cylinder 1 misfire code. i've changed the spark plugs twice now in 1 month. changed the spark plug wires with OEM ones. no fix. my biggest guess since it is also reading catalytic converter and o2 sensor issues is that my converter is clogged ( car is a 98 and been sitting majority of it's life with little to no maintenance ). was going to try and change the o2 sensors only but my converter came in ( already bought it ) so im changing that. only other thing that i can assume really is clogged fuel injectors. im not a mechanic though so i can't verify. right now im just getting ready to change my setup myself.

[@Celbrise]

sadly after changing my converter the misfiring still didn't stop. car runs smoother/quieter not though but yea it still misfires. i've tried STP intake valve cleaner not totally sure if i did procedures properly as my car doesn't have RPM meter on it. that helped a little with the rough idle but still misfire code i really don't know wth is wrong with it. like i said my only logical guess at this point is injector is clogged. it drives fine at this point but when idling/stopped that is when you really feel the rough idle from the misfire.

[@Barthoooo]

Can someone tell me what tool he is using to cut the exhaust? Thanks.

[@driversseat1707]

Her! Just had the two passenger side flex on my 09 Porache Cayanne S replaced and ii had to return it two data later. The car was sputtering and shaking plus the check engine light kept going on and off until it stayed on. Took it back and all types of codes came up

[@morestupidforms]

Exactly what I needed to know, thanks.

[@asianstud7]

What is the new gasket needed for?

[@dabosman43]

My only guess is he needed to reach the top of flex pipe to finish the weld ....so maybe a new gasket to be on the safe side. I could be wrong though

[@brunobltwo]

which mig wire did you use, stainless steel wire or mild steel wire? cheers mate

[@heterosapiens179]

Mild wire for these pipes. Stainless wire for stainless exhaust systems! Best regards!

[@davidventura6433]

Esa corta tubo donde consego para comprar me gusta deste bolivia

[@deleanor9665]

2:02 HMM??

[@HumbertoGraciaAlvarez-oc8gl]

Que medidas tiene la Maya ,del santa fé 2017

[@Dee-l2g]

Why has he had to change the gasket, when he's just cut out and replaced the flexi part? I wouldn't be able to undo the nuts on mine to get to the gasket.

[@Celbrise]

im guessing maybe a leak? cheaper to fix the flex part then the entire setup just like with catalytics if you can weld then just cut it out and put in new ones and weld it in place or i've seen one guy bolt it on with clamps too. if leaking then best to change the gasket as well they are cheap. spray the nuts/bolts with penetrating oil it's what im going to do especially since mine are rusted af. can't really torch my converter either i dont have a torch and also i still can't torch the front end due to lots of grease build up. would easily cause a fire

[@Wildwwill]

Looked like he dropped the pipe to get at the other end of the flex with a welder.

[@marcoshved9598]

Ok so i what all was used in tbis video apart from welding witch ive never done before but i bought a flex pipe turns out i need couple other stuff

[@ريانالنابهي-ض6ظ]

من فضلك ما اسم آله القص الذي قصيت فيها الشكمان

[@ibrahimbasak904]

Usta selam benim aracım 99 model yirtiğ var zararı varmi

[@dandunning4409]

That's all good but what if you don't have a hoist, welder and why remove the Y pipe!? Was it only to get to the top to complete the weld?

[@24hourjukebox55]

there is a ''clamp on flexi hose''...no welding needed...

[@micharudzki1986]

Good Job

[@pedwards6972]

that chain cutting tool was awesome!! WTH??

[@hesh12345]

Magnificent

[@davidventura6433]

Hola deste bolivia como se llama ese cierra cortadora por favor

[@carmelojollyjoker7973]

Good Job👍👍👍

[@TheCaslo]

Please, what type of welding machine do you use?

[@jager454gaming]

Its a wire feed MIG style welder using argon gas, more than likely at a 75% Argon 25% Carbon Dioxide (CO2) mix. Welding exhaust takes a steady hand and a low temperature because of how thin the metal is.

[@heterosapiens179]

Handy Mig 205 Its a hungarian Corp.

[@dnickens20115]

Can someone please tell me what is the purpose of changing this pipe?

[@emu82bp]

it time to time has a leak

[@LS-ug1im]

Those flex pipes rust out. They get weak from flexing with the movement of the vehicle and are a rust magnet.

[@saadhakm118]

هل تلفها يسبب رجه بالسياره عند Dاو R

[@akashsankar5355]

The tool you use to cut the pipe , what's it called

[@heterosapiens179]

Exhaust pipe cuter-chain cuter.

[@jaredloveless]

Me watching him bring out the cutting tool... "I could do this!" Him

[@JohanYavari]

There's no acetylene torch in this video.

[@jaredloveless]

@@JohanYavari amd yet you know what meant. are you a bot or are you bitter?

[@dededede9399]

Do you still keep the old flex?

[@hunorszabo6051]

Minek hívják az a láncszerszámot László? Lehetôleg angolul, de persze, hogy magyarul is jó lessz

[@nepazarolj]

Szerintem láncos vágó.

[@jamesurtekar1657]

Nice work.

[@marinvremes5702]

Cooool......that was nice, I love the music, kind av hard to stay steel......hahahaahaa

[@chaskuhn6447]

All for the reasonable cost of $842.00 at your local Meinike.

[@timothygrant2831]

Reasonable 😂

[@Brett-jx3il]

Chain cuter I never saw one work like that

[@apassmimo9003]

I rilly need that idea

[@captainlupo5516]

You should of put the gasket in whilst you had the old flexi pipe of you made an easy job look difficult 😂

[@abc-ni9uw]

Everybody has a spare welder machine in their car boot yea I'll get mine out 😒

[@troycawthorn4687]

Lyf3 1z TOUGH ikr??? This was such a wasted watch

[@CustomJack]

I don't see anything wrong with the flex pipe. Mine's completely torn off.

[@sunderirama]

Great

[@gmjunky87]

sorry i couldn't watch this video, i started dancing around the house to the music.

[@journeyman1126]

I want that tray!

[@stevengeorge2357]

Forró szikrák fájnak így kesztyű nélkül.

[@nepazarolj]

Csabi egy Superman. Bírja. :-)

[@orosz022]

a katalizátor tiszta volt ---:-D

[@ابوفيصل-ز2ك]

ممكن احد يدلني عليه لو سمحت وكم سعره

[@geovanimartinez4486]

Pu3de entender en cheken engine por esto

[@ishaq6071]

If u have proper tools and safe ramps. Almost any part of the exhauat can be changed without a welder. I use clamps from autozone. And it never fails. DO NOT use tapes of glues. Its waste of money.

[@richardfritchel8267]

useful

[@shareenandhashim4239]

Someone plz tell me whose music is that??

[@Abdu-ie5be5nk9s]

جميل جداً

[@omkarchavan2701]

Kolhapur

[@MrRustysteels]

Now i know how the fuckers are stealing cats so easy

[@jonexhausts5200]

Jesus get a reciprocatimg saw..no need to replace the gasket when u can weld over the top. Id have thay done in half the time

[@medo_1992]

ليش غيره

[@johnhershey4010]

I would take the CAT out

[@rebeccavasquez9571]

Then the auto repair shops charge so much.

[@مشمعايافلوسالوصلات]

جميل

[@faowezchami2976]

واش اسمو

[@alimaqhour723]

Tools name please

[@Whiskeyman1776]

Music choice was trash like silence is better

[@dezminwalker7972]

Hire a camera man next time

[@luissantiago7824]

No "Music" Please,🙄

[@whathandleUtalkabt]

Okos magyar

[@ShiningForce07]

Usually we are.

[@mohamedisaoui2728]

Hola lleavi luke kortando

[@andrewtrask9650]

Definitely not a OHIO car

[@mohamedisaoui2728]

Kadena

[@huseyinozgenc9754]

7

[@vic8230]

Seriously lmao. I hate these videos. What I wanna see is a video that shows a backyard mechanic how to do it with a jack, stands or ramps. Under a car. Most people don't have $3k lift

[@red13redc]

so the size needed for the flex pipe just depends on how much of the remaining pipe still exists?

[@RayH-]

You can measure your existing flex pipe and if you're lucky you will find the exact length you need but all the replacement flex pipes I found were longer overall than the one on the car. I haven't done the install yet but plan to remove the existing pipe and cut down the new pipe to fit