BMW K-Bike | Full Engine & Gearbox Rebuild & Paint

[@corner.custom]

Who watched the whole video and is exited for 4 wheel BMW content?

[@sufletdemotociclist7014]

Meee! Nice job dude! I've mine dissasambled and waiting for parts. You're a ource of inspiration for me

[@corner.custom]

@sufletdemotociclist7014 Ok perfect man, great to hear 👍🏼. What are your plans for your build?

[@stevensapyak7971]

5.1.24. 💁🏻‍♂️”4 Wheels good … 2 WHEELS better”©️

[@dudefishgelf]

This is an AWESOME video! I would love to do this to my 2003 K1200GT, but luckily it works great and I do not yet have to go through these extremes to repair it. That being said, I do have a very slow transmission fluid leak, and I noticed this after seeing a single drop on my garage floor coming from the boot between the swingarm and gearbox. I have checked the level of the transmission fluid and it was about 150mL low and I filled it back up. I believe that the trans fluid is pooling in the boot and swingarm, and I am pretty sure that about 150 mL will spill out when I remove the swingarm to replace the transmission output shaft seal this weekend. Wow!!! Excellent work.

[@corner.custom]

Thank you, I hope to share the a new video soon in this build. I've changed everything I could change just to be sure in the future. Way easier attacking this when it's all in pieces 👌🏼👍🏼

[@anthonymoser4096]

relax

[@Freebyrd1991]

I dont have any work to do on mine yet but I know where to look if I do. Love how you documented this. Thank you dude! Youre the beat!

[@corner.custom]

Thanks man, comments like are really appreciated 👏🏻 👍🏼

[@Justk75]

Again very informative and brilliant video .going to be using all these 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@corner.custom]

Thanks for the feedback. I hope to share a new episode soon because I want to have this build finished this month!

[@gewasse]

Loved it! Great work like usual 👍🏼

[@corner.custom]

Thanks man 🤙🏼

[@quasimodo8215]

Der Künstler hat schon wieder zugeschlagen😉! Excellent 👍

[@corner.custom]

Haha danke👍🏼 Noch viel Arbeit vor uns

[@timsun6810]

giving lots of inspiration for a k1200rs project I may begin- been sitting for a long time- trying to decide between major overhaul/refresh similar to this, or just refresh fluids filters and see if it works. But probably Worth the effort to give it a full new life i would bet- but a huge endeavor. Any Manuals recommended? Clutch centering tool?

[@corner.custom]

That's awesome to hear, go for it! A clutch centring tool is much recommended and if you'll send me a email to cornercustom at hotmail.com I can send you the manual

[@krede7242]

Love the tungsten color! Just ordered graphite black for mine, but I can see I should have order tungsten instead😅Maybe for the next project. Cannot wait to see this bike done.

[@corner.custom]

The tungsten looks great, even looks better in person! But on the other hand I've used loads of graphite black also and gives a nice and subtle look, so can't go wrong on that either. Hope to share new content soon, only thing that my external HD fell on the ground with all the videos on it..... So need to get that recovered soon. Bummer

[@krede7242]

I saw your previous builds with the graphite black and decided to chose that as well, due to the subtlety as you said. I am sorry to hear regarding the camera, I hope it is not too bad and you did not lose too much footage

[@corner.custom]

@krede7242 Right on! Yes nice and subtle 👌🏼With a little bit of luck they can save all the footage, but it will take some weeks, but in the meantime I can continue on the build just fine

[@krede7242]

Fingers crossed mate - Looking forward to the next vid

[@corner.custom]

@krede7242 Thanks 🤙🏼

[@jesuss.2269]

Espectacular trabajo! Como siempre un saludo desde España!

[@corner.custom]

Muchas gracias amigo!

[@narcissistinjurygiver2932]

thanks. I have a 96 r1100rt and am wanting to do this to it.

[@corner.custom]

Will definitely transform the looks of your bike to the new millenn😎👌🏼

[@leondantuma7123]

Another excellent video. That colour is exceptionally beautiful! Can you give an estimate on the associated cost for the replacement parts used for this rebuild?

[@corner.custom]

Thanks, great to hear 👌🏼 Costs are around € 500 for parts and Cerakote

[@tomsortore8301]

This guy is a genius!!!

[@corner.custom]

Thanks man, doing my best!

[@tonvandenberg7945]

Prachtig werk man,ook geweldige editing!

[@corner.custom]

Kijk mooi om te horen! Probeer met elke upload de kwaliteit hoger te krijgen 👌🏼

[@TonySims888]

I really like that color. Tempts me to tear down my K1200 and do the same.

[@corner.custom]

Yes go for it man, nice to have a break from the norm, black. Looks OEM 👌🏼👍🏼

[@ericmrobinson]

Fantastic work, this gets me excited about my build. You sent the small parts out to get blasted but what about the engine block? Did you just clean it up, sand it, and spray it or did you get that blasted as well?

[@corner.custom]

Great to hear 👍🏼 You should check out the previous episode, in that video I cleaned the engine and go into the cleaning methods

[@donpedro04]

superknap werk, heel mooie kleur dat grijs, ben al nieuwsgierig naar het eindresultaat. Heb zelf ook een k1200rs.

[@corner.custom]

Ja het grijze is wel eens leuk voor de verandering, ook omdat het frame al zwart is geeft het wat meer contrast. Ok cool, origineel of zelf ook mee aan de slag geweest?

[@donpedro04]

bij mij nog alles origineel, ik mis helaas plaats en ruimte maar vooral uw kennis, talent en bekwaamheid om zulke mooie motoren te maken.

[@corner.custom]

@donpedro04 Zeker raadzaam en een ruimte te hebben die je specifiek voor de motor kunt gebruiken om zo ook het overzicht te houden. Talent heb ik niet, heb vooral geleerd door het te doen en te leren van de fouten. Mijn eerste build was zeker niet gelijk aan mijn huidige build, stap voor stap 👌🏼

[@mattcampbell2453]

where does everyone gets these awesome plastic intake covers!

[@corner.custom]

These are 3D printed plates, got them from a buddy. Nothing fancy, but a must have IMHO for this stage

[@Feels_Lucky]

need to know more about you my friend, how did you get to where you are now? self taught/ study etc. I am hoping to be able to do this sort of work in the future.

[@corner.custom]

Just self taught, learning by doing. Just check out my older videos and then you'll see the progress

[@CCGORE]

Looks just like mine! im missing all the side fairings but my engine is nice and clean so i dont have to do this baloney, although this looks way nicer. Are you going to restore the bike or make it custom? Ive removed the abs and am in the process of rewiring the abs system so that it doesnt bitch at you about it. It would be cool to see a video on the abs system if you decide to go completely custom on it!

[@corner.custom]

Ok sounds great man 👍🏼 I'll build it to a bobber, so keeping it clean and minimalistic. Also planning on deleting the ABS, but still need to dive into that. Did you ran into problems so far with the ABS delete?

[@CCGORE]

@@corner.custom you have to redo the hardline sections of the brakes and modify the bracket on the front so you can connect one side to the master cylinder and one side to the brakes. on the rear you need a longer brake hose (atleast on mine i did). the brakes will work that way but the bike will freak out on you untill you trick the abs system into thinking its ok. you must wire in some relays like the guy in this video explains kzbin.info/www/bejne/gIfHcqtpjdylbdk.

[@corner.custom]

Ok thanks for sharing the info. Yes I'll redo all the brakelines, but didn't knew that part of tricking the wiring yet 👍🏼

[@CCGORE]

@@corner.custom Dont do what that guy did, just take the computer off of the abs module and cover the exposed bits when you put it back on the bike. It is needed for the speedometer to work. I still havent found a way to get the lights to stop but thats the next guys problem. Hope things are goin smooth with the build!

[@corner.custom]

I'm planning on deleting the whole K12 wiringloom and use a K11 wiringloom. That has been done before and then I'll use an aftermarket speedo as well

[@conordawson2649]

Hey man, what does it mean to get everything “blasted”?

[@corner.custom]

Prep the parts for paint by blasting it with aluminum oxide

[@guilahernandez5577]

Great work!!

[@corner.custom]

Thanks🤙🏼👍🏼

[@sennubalan3733]

Clean job 😀

[@corner.custom]

Thanks 🤙🏼🤙🏼

[@EE9Civic]

Great content.

[@corner.custom]

Thanks! Hope to share new content soon!

[@Bokslegens]

Hello, I watch your videos on KZbin. I will buy a torque wrench for the K1100lt motorcycle engine. 20-120 N.M Will an adjustable torque wrench be enough or should I buy 25-220?

[@corner.custom]

I would go for the 25-220. Better buy it right the first time, could be useful for other tasks in the future

[@pepel4006]

Wow! Very nice

[@corner.custom]

Thanks🏆🤙🏼

[@conordawson2649]

Bro I wish you lived in the USA. I would love to pay you to do this to my bike.

[@corner.custom]

It's a handful to do it like this, but the end result is well worth it 👊🏼👍🏼

[@шАмАн-э7ы]

Очень красиво 👍

[@corner.custom]

Thanks 👍🏼👌🏼

[@Plumbumas]

Hope F20 is diesel one. 😅

[@corner.custom]

No it isn't! Why 🫢?

[@roepieroepie5333]

Ik heb de williams uitvoering van 2003. Nu heeft mijn abs pomp kuren. Achterrem werkt niet. Levensgevaarlijk dat bmw zo iets onbetrouwbaars gemonteerd heeft. En dat in 2003! Ik bedoel eea stond natuurlijk niet nog in de kinderschoenen. Nu denk ik dat hele systeem af te koppelen. Pomp nieuw is onbetaalbaar en blijft onbetrouwbaar. Wat is uw advies. 😢

[@corner.custom]

Tsja ben er ook geen fan van, daarom haal ik ook alles eraf en zet ik er een K11 kabelboom op. In mijn situatie denk ik wat makkelijker dan voor jou met een originele/beperkte oplage. Je zou Kpartsholland.com kunnen benaderen om te horen of zij een vervangend systeem hebben

[@sharg0]

That's one sexy package!

[@corner.custom]

Sure is 😍😍👍🏼

[@JM-rw9je]

Just another great content channel ruined by the background music.

[@corner.custom]

Do you prefer without any background music? I'm always open for suggestions