In todays epsiode we are going to paint the drivetrain parts and start to assembly everthing back together :) Make sure to check it out ;) For more content follow me on Instagram c.p_customs_
Пікірлер: 24
@Thewatson773 жыл бұрын
It’s your bike...you can do it however you choose! 🙌🏻 I’m enjoying the process
@CPCustoms3 жыл бұрын
Thank you very much for the feedback buddy 😎🙏🏻
@g_25073 жыл бұрын
Your help is priceless! :) Congrats!!!
@CPCustoms3 жыл бұрын
Thanks buddy 😜💪🏻
@hogueraleksander58683 жыл бұрын
I actually did the cleaning of the engine and frame yesterday. Took me all day. But I sand blasted everything. You get sand everywhere but it removes the crap and grease that a wire wheel can't get into. Also leaves a perfect even finish ready to clean with mineral spirits and paint right after. Looks better than new. If you try that on the future make sure you wear a respirator. The silica in the sand will kill your lungs.
@CPCustoms3 жыл бұрын
Thanks for the tip buddy 😎🙏🏻 I don’t have an opportunity to sandblast parts yet but I will definitely consider it for my next workshop shopping list 🤟🏻 BR Patrick
@kamilkurek68323 жыл бұрын
Put front end from yamaha r1, i think only change steam. Tommorow I try. Take from bmw and put to yamaha triple. You can change rear wheel from r1150rt.And put 170 60 17 tyre. Remove air box, keep only maf sensor. Change speedo but this is expensive. Up to you, It is your project. Nice film.thanks
@CPCustoms3 жыл бұрын
Thanks for the kind tips man 😎🙏🏻 We have to deal with strict technical regulations in Germany so I can’t go tooo wild 🙄
@sherwoodbaker27142 жыл бұрын
Very impressive
@danhix13713 жыл бұрын
you can roast a marshmallow on that campfire 1:20 lol!!.. Coils cleaned up nicely!
@CPCustoms3 жыл бұрын
Thanks buddy 😂😂🤟🏻
@f.c.truter46023 жыл бұрын
Love the videos and the build. Very entertaining and inspiring. Would of used spray cans for keeping it in budget and smoother finish. ✌🏻from South Africa 🇿🇦
@CPCustoms3 жыл бұрын
Thank you buddy for the feedback 😎🙏🏻 Yes you are absolutely right, for the next parts I will use the spray can method again 🤟🏻 BR Patrick
@amrelsayeh44463 жыл бұрын
I really enjoying this videos and im watching it like im watching interesting series and waiting for the next episode. Can you make a video after finishing it explaining the type of sprays and material you used.
@CPCustoms3 жыл бұрын
Hey Buddy 😎 thanks for the feedback 🙏🏻 of course, I will do an explanation Video when everything is done 🤟🏻
@ravananinusamotovlog86983 жыл бұрын
It will be nice if you don't speed up the video and explain what you are installing. I think most of us would love to see it in detail regardless of the length of the video.
@CPCustoms3 жыл бұрын
Thanks for the feedback 😎 I try to do a good mix of both. It is just the style of the content to speed up the videos with small explanations in between. However if you have any questions you can reach out to me on Insta I will try to show or explain it you in the best way 🤘🏻
@Andrewlone174 Жыл бұрын
If someone is billionaire than paint with powdercoating but i'm going to paint like on video!
@berrywest16223 жыл бұрын
Didnt you end up with a lot of dirt inside your differential? You did not mask off the hole from the speed sensor. Greetings from Holland =)
@CPCustoms3 жыл бұрын
I hope I did not 😂🙏🏻
@jonimaginations3 жыл бұрын
Hi, kann man dir irgendwo eine pm schreiben?
@CPCustoms3 жыл бұрын
Klar doch 😎 auf Instagram c.p_customs_
@jonimaginations3 жыл бұрын
@@CPCustoms danke dir
@thodkats2 жыл бұрын
I think you must support Bayern Munchen. Not sure yet…..