BMW K1600GT Foot Peg Lowering Blocks

[@digger8180]

Yesterday I took my K1600 out for the first time this year, almost forgot how good that engine is. Good video 😃

[@JayBearjaysbigadventure]

Good to hear from you again! It has been a long winter for sure.

[@BeachDay1299]

Nice video, very informative! I installed them on my B and removed them the same day. I was dragging / touching the toes of my feet constantly.

[@BorisOnWheels]

I'm 6'1 and for me it was the handlebars - shoulder and neck pain after an hour or riding. To counter that, I got Sargent seat with a backrest and Horizon Multi-Axis Adjustable Handlebars from HeliBars. Worth every penny! You should also look into adding highway pegs that attach to your crash bars. Cheers!

[@JayBearjaysbigadventure]

If you've not seen the video on the bar risers, that does help, but you don't get the adjustability of the Helibars. I had a set on my 08 K1200S and was also surprised at how much of an improvement it was. :)

[@rockout1180]

Did you get highway pegs? Im looking for a source?

[@davidbrooks8061]

Thanks for sharing. Even though I'm only 5:10, an inch lower would be significant. The ground clearance issue is a negative though.

[@JayBearjaysbigadventure]

Ask any woman how important the last inch is, lol!

[@terryoconnor4208]

Thanks jay just saw video and ordered them 6 ft 1 I do feel a little cramped stock .thank you

[@rayshobbyfarm.1019]

How are you after 1 month? Did you get them and is it better?? I'm 6'1 too and rider position is not bad but on long trips I would like a little more leg room. Also looking into a GW seems less powerfull but more comfy...

[@ed.t.hansen6499]

need dimensions of the male end; total female end width as also inside diamerter. along wtih hole size for pins; so you can use on other bikes.

[@123limelight]

are they good for daily in town riding

[@pgVeritas]

Great video on the pros and cons of lowering the pegs. I can’t imagine what it’s like on the GTL and Bagger with 750mm seat height. The GT is 810 or 830mm depending if you flip the lever inside.

[@JayBearjaysbigadventure]

Yeah, it really does make the bike more comfortable, but hey, nothin's free, right?

[@pgVeritas]

@@JayBearjaysbigadventure that’s really true, thanks for the video on peg lowering.

[@freebirdraces]

How about a link to order the lowering blocks

[@farmerkevin]

Great video.

[@denisejones8778]

The worst part is you need an expensive special adapter to lower the foot brake.

[@billypike9402]

Jeff, I have the same adapter on my 19 GT. Were you able to adjust the gear shift lever at the top of the rod?

[@JayBearjaysbigadventure]

On my bike, it is going to be the bottom. I'm going to explore that soon. :)

[@billypike9402]

I ordered the suburban machinery lowering adapter, installed it, but it lowers the lever too much. I removed it and just adjusted the bottom rod. Works perfect for my size 14’s!

[@micheldesrosiers2922]

just install those this winter, and got my first ride few days ago . its a must, make such a difference. Those chinese got it right at 40 $ CANADIAN. Wunderlinch had some at 3 or 4 times more expensive. see ya from a northern country.

[@JayBearjaysbigadventure]

Stay warm, lol! Can I talk to you about Gerbing heated gear? ;) Will change your life...

[@micheldesrosiers2922]

@@JayBearjaysbigadventure sure

[@toddfather1971]

At 6'-4" I can't imagine that's going to make much difference

[@bountyone]

Where can I order the lowering blocks?

[@JayBearjaysbigadventure]

I bought them from AliExpress.com. :)

[@gregfleenor9654]

BMW. I believe Wunderlich too.

[@bebel3163]

AliExpress

[@malvinashimanov1700]

Hate when people spend 25K on new bike and then put cheap Chinese $25 Dollars lowering blocks. Common...