Bmw e90/91 2008 valve / rocker cover gasket replacing intructions... n43 engine that leaks oil onto exhaust and smokes....this is a common problem on most bmw petrol engines....a quick and only fix..
Пікірлер: 45
@GameFloVR3 ай бұрын
Outstanding! Just on this simple to follow video alone I will be appempting this very procedure on my 320i n43 this weekend. Very informative and straight forward. Musics decent too 😂.... Thanks and keep up the good work 👊🏽😎
@Peter-zc5xc3 жыл бұрын
I shouldnt complain when someone take there time to do something that help others but a video filmed more from above and on the actual thing you work with not moving around all the time would have helped me as a newbie. Besides that, thx
@nas2053 жыл бұрын
I agree. Could have been better. May be next time
@matochristov12152 жыл бұрын
Hi nas, many thanks for the vid! In Haynes manual it says to remove the injectors, but I would like to avoid that so I don't have to compress the sealing rings on them. Could you dismount the rocker cover easily without removing injectors? - or is there a trick?
@qitianzhang36414 жыл бұрын
hi I have some smoke comes out exhaust recently, this my video kzbin.info/www/bejne/l17UYoGMl9mklbc seems I need to replace cover gasket? i have BMW 520i E61 2010 with N43 engine, too. how long did it take you to replace? any special tools needed?
@nas2054 жыл бұрын
qitian zhang Hi it took me around 2 1/2 hours to do it. Just take your time and you will be fine
@-swiss0ne-3 жыл бұрын
Excellent tutorial. Thanks a lot!
@nas2053 жыл бұрын
Thankyiu
@manchairred3 жыл бұрын
Thanks for the making the video. Gave me a confidence boost.
@aprozema3 жыл бұрын
Great! Thanks for your help.
@youonlyliveonce5576 Жыл бұрын
Hi, how much it cost to buy the gasket from the dealers? Thanks for the video BTW.
@johnjones607 Жыл бұрын
35 quid
@SJD44443 жыл бұрын
How much oil leaks from the gasket? I was told it's a VERY small amount. Mines lost over a litre in 2 months. Is it the gasket or a more serious issue, maybe oil leaking into the engine?
@aishasid10533 жыл бұрын
If it’s the gasket you’ll get smoke coming into the car
@kevcat86554 жыл бұрын
When removing the High Pressure Fuel Pump, does the camshaft have to be a certain position... (e.g. Top dead Centre)?
@nas2054 жыл бұрын
No
@ahmetbehcethoscan43753 жыл бұрын
Excellent. Thank you.
@macardabirturk93802 жыл бұрын
Thank you soo much❤🇹🇷
@manifelix Жыл бұрын
Thank you boss 🙏
@3dScience_uk2 жыл бұрын
great video
@maxmck20022 жыл бұрын
Life saver of a video
@davidv48403 жыл бұрын
Thanks a lot for the video! It really helped me!
@nas2052 жыл бұрын
Happy it helped you
@qitianzhang36414 жыл бұрын
hi i may need to replace my rocker cover too, i am 80% sure is the PCV valve failed but has to replace the complete rocker cover. how much did you pay for the complete new cover? and where did you buy it from? I am living in Finland by the way.
@nas2054 жыл бұрын
qitian zhang Only changed the gasket
@kevcat86554 жыл бұрын
What were the symptoms of the bad PCV valve? I have engine oil in my pollen filter and wondering if it's a bad PCV
@qitianzhang36414 жыл бұрын
@@kevcat8655 You see my video kzbin.info/www/bejne/r4CqoGeih6ysZ5o , i think it is problem of PCV valve. But I never see other mentioned oil in pollen filter as a symptom.
@kevcat86554 жыл бұрын
@@qitianzhang3641 Watching it now, will comment
@kevcat86554 жыл бұрын
Do you have to buy new bolts for the rocker gover, are the original ones single use only?
@nas2054 жыл бұрын
Kev Cat No o mate. Old ones sty on the rocket cover and they are fine. Toque it 10nm
@kevcat86554 жыл бұрын
@@nas205 Thanks for the info! I have the same N43. Doing a bit of work at the moment. Have some videos if you wanna check them out
@qitianzhang36414 жыл бұрын
when you put new gasket in, do you use any glue or sealant agent? how do you clean the seating surface? any chemicals do you use in this job?
@nas2054 жыл бұрын
qitian zhang No glue or sealant needed as it’s rubber gasket. Best is to buy from the dealers
@qitianzhang36414 жыл бұрын
@@nas205 how long did it take you to do the whole job? i m plan to replace the valve cover with new gasket by a shop , don't know what is the reasonable time for them to do it.
@nas2054 жыл бұрын
qitian zhang i would say around 2 1/2 hours
@qitianzhang36414 жыл бұрын
@@nas205 thanks for the reply
@gideoneade16524 жыл бұрын
Hi, good guide thanks. Got to the point of removing the injector plugs but can't work out how to unlock the high pressure fuel pump connector. It's got to be really simple but cannot do it. Any tips please? Thanks
@nas2054 жыл бұрын
Just put a spanner on it. It comes undone easy. 14mm I think. Except for one which 17mm
@gideoneade16524 жыл бұрын
@@nas205 hi Nas, sorry probably didn't explain it. I mean the wires to the high pressure fuel pump. There is a plastic clip on connector with 2 wires. Can't get it to release.
@nas2054 жыл бұрын
@@gideoneade1652 Try prying it with a small screw driver and it should come off.
@gideoneade16524 жыл бұрын
@@nas205 cheers, will give it another go when it is dryer 👍
@gideoneade16524 жыл бұрын
Just got it done and no more.smoke in the cabin👍 that bloody connector didn't come off so left the fuel rail in the car on a towel. Thanks for the guide 👍
@christee57723 жыл бұрын
Thanks for the video, made the job a lot less daunting.