BMW N63 engine coolant leak broken hose under alternator 550i 650i 750i 750Li X5 X6 Xdrive50i

[@mikimiki195]

Keep in mind if your getting oil leak in the back more than likely it’s Not your rear man seal. It’s your return turbo line housing and that’s big job.

[@Roman-xb9xn]

Thanks, good video brother. I'm surprised the replacement part still comes with the same plastic Y elbow. You think they would learn and use some metallic elbows around turbos

[@cjoekeys]

Xcellent video!! I wish you lived in Georgia. I'd hire you to work on my car today.

[@danielmackormack8524]

Thank you for your videos ! I own a 09 BMW 750i F01 w n63 engine. I noticed two air bleeder screws for the turbo coolant lines. Should I open them when replacement of auxiliary turbo coolant pump ? Thank you

[@BjrnHenningEide]

Hi. I have a 2009 BWM 750 with a N63 engine. What did you do to get this great sound from it??

[@HTXatLarge]

Thank you so much for the information! I have a 2013 650i with the N63tu engine. I have the same symptoms (coolant leaking from the back of the engine) yesterday I noticed a burning smell and lots of steam and coolant everywhere coming from the engine bay after a heavy acceleration. I'm having a hard time finding the Y connector coolant lines as my alternator is still in place. I removed the air ducts and loosened the charge hoses. My question, is the Y connector for the coolant vent line in the same place as this SUV? Or is it in a different location on my specific car. Thanks in advance!

[@IEEuros]

Yes, it is in the same location.

[@HTXatLarge]

@@IEEuros thanks!!

[@jhartmac100]

The middle reservoir tank is for the turbos.............

[@IEEuros]

Yes, it is the turbo tank.

[@vic7780]

how long did the process take? Can I do it from home or do i need special tools?

[@IEEuros]

Probably 3 hours The tool for the tensioner it is only special one needed.

[@harley22x]

I did it from home without removing the alternator. It's a tight fit, but definitely not impossible lol

[@Batoloco6004]

What are the part ?

[@gemmintrips2377]

How come there are no videos on how remove the turbo cooling hoses lol

[@lueluc8522]

Can u show where u drain the coolant from the n63 engine. 550i. Thanks

[@mikimiki195]

On bottom of your radiator you have big hose just take it off and do the flush Keep in mind there is whit or black looking like torx plug do not unscrew that that is not drain plug.

[@Ameica_no_osan]

What's the part number or part called??

[@jhartmac100]

where is your shop located?

[@miketdo1]

How much?

[@clarencewilliams6003]

How much for a job like this

[@z.j.9537]

Thank you for that nice video! I have the same problem :(. U think the car is still driveable until it gets repaired or can the line burst? And what is the part number of that part?

[@IEEuros]

Yes, you can drive it. I am not sure about the part number but I will find out.

[@z.j.9537]

@@IEEuros thank you very much, no worries part is already replaced.part no. is 17127576363...

[@Nissanpuc]

I wish i could pay you to do mine!!!!