BMW R1100rt rear brake pads replacement service

Do it yourself maintenance, replacement or service of rear brake pads on a BMW R1100rt using EBC FA363HH double H sintered brake pads or FA363 organic brake pads
Rear brake calliper to rear swingarm final torque 40Nm
Castrol Red Rubber Grease - 5900
Follow us on Facebook: / frogsangelslondon
BMW R1100rt Maintenance & Service playlist: • BMW R1100rt Maintenanc...
BMW R1100rt front brake pads replacement: • BMW R1100rt front brak...
BMW r1100rt valve clearances: • BMW r1100rt valve clea...
BMW r1100rt rear brake fluid change replacement service: • Video
BMW R1100rt rear brake pads replacement service: • BMW R1100rt rear brake...
BMW R1100rt signal & rear light replacement: • BMW R1100rt signal & r...
BMW R1100rt engine oil change: • BMW R1100rt engine oil...
BMW R1100rt 1996 Head light bulb replacement: • BMW R1100rt 1996 Head ...
changement plaquettes de frein arriere BMW R1100RT,
BMW R1100RT Bremsbeläge hinten wechseln,
BMW R1100RT Cómo cambiar las pastillas de freno traseras ,
Como substituir pastilhas de travão traseira no BMW R1100rt,
Sostituzione pasticche freni posteriore BMW R1100rt,
wymiana tylnych klocków hamulcowych BMW R1100RT,
Замена задних тормозных колодок BMW R1100RT,
リアブレーキパッドの取り替え BMW R1100RT,
BMW R1100rt เปลี่ยนผ้าเบรคหลัง,
BMW R1100rt arka fren balatası değişimi,
BMW R1100rt takajarrupalat vaihto,
החלפת רפידות בלם אחוריות של BMW R1100rt,
Αντικατάσταση πίσω τακάκια BMW R1100rt,
BMW R1100rt bageste bremseklodser udskiftning,
BMW R1100rt bakre bromsbelägg ersättning,
BMW R1100rt استبدال الفرامل الخلفية

[@patpolin4632]

Cheers for the video, I was kinda scratching my head when I looked at changing my rear pads but you video is clear and extremely helpful.

[@tibork3845]

Same here, wasn't sure how to do them exactly. Good video, thank you!

[@wildbad]

thanks mate, just watched both brake vids. no nonsense, precise and all required steps. extremely helpful.

[@FrogsAngelsLondon]

You are most welcome. Hope it helps! 👍

[@anselliott7440]

The red brake grease is for internal hydraulic components at assembly. "Rubber Grease" that is rubber and fluid inert. No reason to use it externally, it's not meant for that. A tiny smear of molybdenum if you are paranoid-but also not really necessary as the piston pushes-not slides- against the brake pad. You don't want anything that is lubricating near brake components. The rubber grease you use will just melt and run onto the disk then the pads.

[@bobpatvan1]

Thanks for posting this. Very helpful in changing my own rear pads. Cheers and safe riding.

[@FrogsAngelsLondon]

Glad it helped. Cheers buddy

[@mst10506]

Appreciate your videos, but this one seemed lacking. Looked like you put back the same pads that you took off. The EBC pads don't really fit right when new and usually need a little filing of the backing plate. Much harder to get the caliper back into position when new pads are installed. What about greasing the pin?

[@tibork3845]

How do you keep your wheels looking like new? I wash the bike with car shampoo including scrubbing the wheels but they just look dirty. Thanks for this video, now I I know how to change the pads!

[@tnoisette1419]

Thanks for your videos. They are a fantastic 'how to' resource

[@jimsweet6574]

THANKS! simple and straight forward.

[@FrogsAngelsLondon]

Glad it helped

[@Flowsalvador]

Thanks...!!!

[@FrogsAngelsLondon]

You're welcome

[@sidney3610]

Thank you for this video. I was bleeding and installing new break fluid for my rear break. It all went well (fluid and air bubbles came out), untill all of a sudden I lost rear break pressure. There is no sign of leaking but the pressure isn't still there. Any idea what causes this and how I can fix this? Many thanks in advance.

[@dfw2102]

thanks, this is helpful. D. Alburquerque, N.M.

[@FrogsAngelsLondon]

Cheers buddy. Hope it was helpful

[@edmian3567]

Excellent video...as always...

[@peterdewaele5698]

thanks man from belgie

[@FrogsAngelsLondon]

You're most welcome

[@Life.of.Nicholas]

What about the metal clip and pin clip?

[@zdenekmalinsky9028]

Thanks, it helped me a lot...

[@Patrick-co1qm]

Is there any thing that needs to be done to the rotor as far as turning it like a cars rotor?

[@ferhatturhan1429]

Very good thanks

[@FrogsAngelsLondon]

You're very welcome. All the best

[@seifboumaza5076]

Thanks, it's helpful

[@FrogsAngelsLondon]

You're welcome my friend. All the best on the road

[@cherrabimohammed7342]

hi, do not put grease on the rear side of the pad but on the sides of the pads... its lubricate the sides of pad to move freely inside the brake caliper... thanks

[@user-ic6ls7dm5v]

Why do we have to grease the back side of the inner brake pad? Thank you for the video.

[@FrogsAngelsLondon]

Please read that article. Hope it will make sence redrubbergrease.com/

[@webbwalle]

Oh! Castrol Lipbalm on the pads!

[@mikerichey707]

I need help.....when puting the pin back in do you have to tap it back in? Also now when I reinstalled the same pads, they looked ok so I didnt change them, the caliper wont go back on there isnt enough room,,, do I have to push the pistons back in and then put the pads back on and then reinstall. Im lost.. will the pistons stay down when I push them in

[@RTIstanbul]

Temiz İşçilik👍🏽

[@peterdewaele5698]

Do you have video from changing cam chain tensioner

[@mikerobinson2201]

What brand of smaller size torque wrench do you use? Thanks I love your videos I get mesmerized watching you and inspired by your skill.

[@FrogsAngelsLondon]

Thanks for the comment. I use a Draper torque wrench which seems to be of good quality.

[@mikerobinson2201]

Thank you lots

[@JRXDRIVEscoaladesoferibn]

Hy. Is this also your bike? New bought? Thx... I have a 2008 gsa and also want to buy an 1100rt for the,, winter'' Thx

[@FrogsAngelsLondon]

Yes, I use it as a commuting bike to central London every day. Maintenance is very easy and cheap. Not the fastest bike obviously but very comfortable and pleasant to ride on long journeys. Go for it!!!

[@JRXDRIVEscoaladesoferibn]

@@FrogsAngelsLondon ok. Thank you. I used to have the honda st1100 6 years ago but.... I think i love the telelever suspention so i will start searching for an 1100rt.

[@user-ln6wy5qn1b]

👍

[@FrogsAngelsLondon]

Thanks buddy. All the best

[@PorkHunt100]

The only bit I wanted to see was removing the circlip...

[@andrewshields7779]

Useless film. A clip fits somewhere inside the calliper - usually falls out and this film doesn’t show you where it goes!. This film ignores the clip - a brakes accident waiting to happen!