Bmw r1200gs engine rebuild part 15

  Рет қаралды 2,406

Dirtyboots

Dirtyboots

Күн бұрын

Пікірлер: 12
@karolas123
@karolas123 3 ай бұрын
Please make a playlist of these episodes.
@Tattytyres
@Tattytyres 3 ай бұрын
@@karolas123 interesting , how do i do that thank you
@Tattytyres
@Tattytyres 3 ай бұрын
@@karolas123 hi iv had a go see if thats better thanks
@karolas123
@karolas123 3 ай бұрын
@@Tattytyres kzbin.info/www/bejne/nGaxc2Wpd7N6pZo
@chris6182007
@chris6182007 8 ай бұрын
Nice job! Been there with my R1100GS
@AnalogDude_
@AnalogDude_ 8 ай бұрын
5:57 my final drive looked as burned as your engine casing, when i retrieved it from the BMW dealer, You should have it chemically professionally stripped, don't use "home improvements shops chemical paint stripper" it might affect the aluminum , BMW suggest using "Matt Schwarz 466 anti scratch" it's the same black as their black powder coat they use on the current bikes. From a car's body damage shop i know it's not water based paint. the "anti scratch" part is some special clear coat that goes over the black paint. Such a cool bike, you should make the drive train black, bit by bit. : )
@Tattytyres
@Tattytyres 8 ай бұрын
Great info thank you very much
@AnalogDude_
@AnalogDude_ 8 ай бұрын
@@Tattytyres Just an idea, drill 2 mm hole in center of the broken bolt, just deep enough to pierce the other side, fill it with "this" oil and let it stand for few days, look if the oil level drops, then try to make slot for a screwdriver, use a contra tap to unlock broken bolts or weld something on. 3 engines, you need 1 more gearbox to make it complete and black. : ) Looking forward to next video.
@Tattytyres
@Tattytyres 8 ай бұрын
Yeah i should have lots of spares ha, yeah i will leave to soak, but i will prob not reuse the cases, i think i will degrease them and put them on garage wall as a display, just hoping the spare engine cases are good ha
@AnalogDude_
@AnalogDude_ 8 ай бұрын
@@Tattytyres I can't judge for you, but probably a good idea to look for a used final drive for the same GS, a RS, RT has a smaller crown wheel, 2 teeth less (i know i have both for my R1100RS), but will go faster in top speed vs slower acceleration, difference = 6%. For the day yours brakes down, i know a guy that has a R1200GS and did more than 250.000 km and still driving around, although with recent new shaft. it's luck based. There are 2 models, the first one has a aluminum "plate" to bolt the wheel on, the newer one has a inox plate, you should research if the newer plate or newer final drive fits older models. It's quite a job to take it apart where you need to build tools to get it apart and together again. also your need a special socket for the input shaft, witch probably hard to get if not impossible, like in my case. You need to make heavy duty adapter plates with thread rods to pull that plate off using the bolt holes from the casing, use the bolts around to pull it. some guy with a BMW K1200S posted a video maybe your can find it. it looked like he used a CNC plasma cutter to make these plates.
@ferguscawley11
@ferguscawley11 8 ай бұрын
Good work 👏
@Tattytyres
@Tattytyres 8 ай бұрын
instagram.com/p/C7cGFeDtHBL/?igsh=czRxa3MydjZ5b21k
GS Rebuild Part 3
28:43
Normski
Рет қаралды 16 М.
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН
2025 DUCATI MULTISTRADA V2 S | FIRST RIDE REVIEW
14:29
Bike World
Рет қаралды 8 М.
Bmw r1200gs final drive service
24:42
Dirtyboots
Рет қаралды 1,3 М.
Desmontaje motor BMW R 1200 1250 GS LC RT R RS
10:38
BMV Motorrad nOficial
Рет қаралды 18 М.
Forgotten Air-Cooled V4 Engine in a Motorcycle | Part 1
13:09
REBUILDING A BMW AIRHEAD ENGINE IN 30MINUTES
29:54
Workshop Rebuild
Рет қаралды 1,1 МЛН
BMW 1200GS Rebuild Part 4
30:37
Normski
Рет қаралды 57 М.
Complete Assembling of 70CC Motorcycle Engine
7:32
Artsy
Рет қаралды 25 МЛН
BMW R1100rt starter motor failure & replacement
17:06
Frogs Angels London
Рет қаралды 55 М.