BMW RnineT LED Headlight Upgrade Installation

[@noiox8]

Fabulous upgrade, do you guys have any plans for making a LED lighting upgrade for the new Triumph Street Triple 765s?

[@julienpetour1448]

Great headlight ! It is compatible with nine t scrambler 2019 ?

[@motodemic]

Yes!

[@jerryx2000]

What is a can bus canceller?

[@motodemic]

A device that tricks the bike into thinking that there isn't a bulb error. It cancels the warnings from appearing on the dash.

[@cmccomas210]

Great video. Question regarding getting CANBUS canceler -- If the headlight doesn't come with one -- how do I know the correct one to buy?

[@hammersteve8]

Chris McComas It comes in the kit.

[@ccorey183]

You can order the install kit. The part number is 0703571. Its the can bus canceller, harness, clips, torxs. No headlight.

[@gilrodriguez8830]

Thanks for the video. Can you please let me know what front position canbus warning canceller you recommend, if the new light doesn't come with it?

[@motodemic]

Just about any T10 warning canceller should work. Make sure the leads on the receptacle side are not making contact (best to cut and terminate).

[@bullfrogribbit]

Nice video, thanks! Do you guys do any fuel gauges for R nineTs? If you don’t, do you have any idea who does?

[@otmcarsandmotorcycle1640]

My trick is to RESET MILES 1 every time I refuel. My 2021 R NineT Scrambler gets roughly 120 miles per tank, fuel light turns on around 90 miles but I try to fill up at around 100 miles

[@oscarlazo6636]

Can I purchase the front position can bus warning canceller? Thank you

[@djpetuh]

Hi! Thanks a lot for this video. I have a question. Is it possible to install a double headlight on this fantastic bike? I mean something similar to the headlights of Triumph Thunderbird Storm or HD Dyna Fat Bob? Or the space between the legs of BMW front suspension fork is too narrow for the double headlight?

[@motodemic]

Steeldime A it can be done but it would be custom.

[@karanjitsandhu97]

Do we need to purchase the optional Mounting Ring for the R NIneT? What does this mounting ring do?

[@motodemic]

The RnineT does not need a mounting ring. Everything you need comes in the kit - bit.ly/mdRnineT

[@predodukanovic9743]

super video, fantastic. thanks.

[@Levente20]

can you also upgrade the old ninet headlight to the new 2021 modell year r nine t LED lights?

[@motodemic]

You would most likely run into the same CANbus issues.

[@BaberPasha-b2w]

Can you please provide a link to buy this light?

[@motodemic]

Link is in the description 👆

[@DeviantMoto]

Do these not turn on automatically with the bike? Or is that just the first time they power up?

[@motodemic]

Deviant Moto low and high beam function identical to the stock light.

[@bill.webster]

There's an explanation for why, despite what you see in the video, the Motodemic light requires no manual activation to illuminate. From the factory, only the parking light illuminates with the ignition key turned on. The low-beam illuminates automatically after you start the engine. In the video, the parking bulb is removed with the kit, so after he turns the key, nothing illuminates, which you might expect. Also, from the factory, you can turn on the low- and high-beam bulbs _without starting the engine_ by flicking the headlight trigger. That's what he does in the video around 4:10. As a result, you might think that you have to manually activate the Motodemic with the headlight trigger the first time you use it (per your question), or at every start-up, which I wondered. But I don't think that's the case. The Motodemic will illuminate automatically, just like the stock headlights, after the engine is running. To avoid this confusion, perhaps the installation video could show how the Motodemic operates with an engine start.

[@ClipsByMiles]

Hi, is there any way to disable the “headlight dance” when you turn the light on?

[@motodemic]

Sorry, this sequence cannot be disabled on the Adaptive model.

[@BarsoumAdam]

Any advice on what to do if the screw wont reattach back, after I semi tighten it and put everything in place and try to secure it (tighten with the torx driver) the clamp turns with the screw and disengages it just keeps rotating inside the headlamp instead of clamping down?

[@motodemic]

adam Barsoum sounds like the screw was loosened too far and the clips may have turned. Align the clips and don’t have the bolt so loose when reinstalling. Should do the trick!

[@BarsoumAdam]

I tightened it as much as it can, after a certain amount it will not tighten any more, even when out in hand not on the motorcycle. However when I took the screw assembly (Clamps, bolt and screw) out of the headlight and held them in hand I could tighten all the way to the end of the screw. @@motodemic

[@motodemic]

adam Barsoum the screw doesn’t need to be very tight, if you go too hard it may strip the clips because they are just thin metal. If the clips are turned it won’t work no matter how much you tighten it. Check out how they are aligned in the video at 0:58

[@johnroberts6836]

What's is the cost of the R nine T conversion shipped to the UK

[@motodemic]

bit.ly/mdRnineT -> add your desired option to the cart -> use the shipping calculator to see time vs cost 👍

[@haniel67]

Hello! Would this fit in the Roland Sands Radial Headlight Bezel??

[@motodemic]

haniel67 it will not without some DIY modification. We have heard from many customers that made it work by using some sort of shim material. We are looking into this so we can offer a solution.

[@TheShagans]

You make handling that lower screw on the bezel look easy. I can’t get mine to screw back in :/ just will not tighten

[@motodemic]

Just make sure that the tab is lined up. It can be a real pain if the screw is loosed too much (2 turns max).

[@BarsoumAdam]

Couldn't get mine to secure either, had to take the assembly back up to the apartment!

[@jetcarddude]

Is the part number available? So many on the market......

[@motodemic]

Follow the link in the description 👍

[@Blackbatmanbb]

I have a 2000 R1200 do you know if this will fit?

[@motodemic]

This will not work on a R1200 R or C. We have a product for the R1200C - bit.ly/clscBMW

[@Hoshikoification]

hey Would this fit a 2011 R1200R??? Thank you

[@motodemic]

Sorry, from what we can tell it would not be compatible with a R1200R.

[@quidpropack]

Would this work with the Roland Sans headlight surround?

[@motodemic]

quidpropack sure will!

[@omegalopez71]

MOTODEMIC I have the Roland sand headlight retaining ring how do you lock in the spring clips?

[@joohyungnoh6116]

Is this the same product called JW speaker 8790?

[@motodemic]

Joohyung Noh yes, we use JW Speaker LED lights 👍

[@hgm8337]

I swapped out my H4. bulb for a yellow one, same voltage. LED headlights are shown to dazzle oncoming traffic, so they are not an upgrade imho

[@motodemic]

The dazzling you are referring to is when you add an LED bulb to the stock reflector. These are projector based systems so the lighting is going through an optic with much more control. That allows a much wider beam pattern that goes much further down the road. It is absolutely an upgrade.

[@alanjoseph772]

What bike is next to the yellow ducatii Scrambler?

[@motodemic]

It's a Ducati Monster 796 with our Monster Headlight Conversion 👍 - motodemic.com/shop/ducati-monster-headlight-conversion/

[@ruger041168]

will this throw a bulb error on the dash on 2017 up bmws

[@motodemic]

Typically not, the Scrambler in the video is an '18

[@pb350z]

Yes it will.

[@syauqierohani2363]

Hi, where can i get the can bus canceler

[@motodemic]

It is included in the kit 👍

[@sebastianb.3126]

Is this legal for Germany?

[@motodemic]

Sebastian B. absolutely! Meets and exceeds ECE standards. 👍

[@9tbiker455]

MOTODEMIC Whats the Price with shipping to Germany?

[@motodemic]

9TBiker pricing varies. Head to motodemic.com add your desired items to the cart and use the shipping calculator. 👍

[@BERZERKERSV4]

Problem is that the LED “ upgrade” looks cool, but throws a horrible light pattern at night.

[@motodemic]

Not sure where you are getting your information or maybe you only have experience with lights that are not intended for road use but you couldn’t be more wrong. This is a projector based lighting system so there is 100% control of the light spread. Super wide low beam with a smooth cutoff on the horizon coupled with a high beam that throws light super far. Follow the link in the description to see real world photos.

[@rigman70]

Looks to easy I’ve spent best part of 8 hours trying to torque the bottom of the light to the bezel to no joy.

[@motodemic]

rigman70 the key is make sure that bottom tab is not very loose when reinstalling.

[@rigman70]

MOTODEMIC thanks will give it another go 🙂