Not much. It is on the same plane as the bottom of the upper triple clamp..
@양사나이-o7t10 күн бұрын
When is the 2024 765r going to be released? I can't wait for it to be released..
@motodemic7 күн бұрын
It's a matter of us getting our hands on one and demand. There is a significant investment on our end for that model because it needs a whole new bracket and gauge cover.
@jdlagares10 күн бұрын
No crcesita anillo adaptador?
@motodemic7 күн бұрын
The adapter ring comes installed on the lamp already. It can be seen at 00:18.
@vicentefontecilla202528 күн бұрын
Beautiful. Does it work in the Triumph Scrambler 900 (2024)? No need for cable modification or anything? thanks!
@motodemic24 күн бұрын
As far as we know, this upgrade is still compatible with the '24 models. Direct plug and play.
@will-ellingtonАй бұрын
What's the windshield model please? Looks amazing!
@54321kolaАй бұрын
Top video
@ahmadua1Ай бұрын
Hi, Does it fit for BMW R18 B?
@motodemicАй бұрын
Sorry, this does not, and we do not have an option for that model.
@Kenneth_McGrewАй бұрын
I have two bulbs in my oem headlight so how does this connect ???
@motodemicАй бұрын
For models with a parking lamp, unplug that and tuck the connection in with the other wiring in the housing. If you want the parking lamp function (uncommon), you can wire the the positive lead to the trimmed red wire on the back of the headlight.
@dmill432 ай бұрын
Does tucking the air temp sensor mess with how the bike will run or affect the bike at all
@motodemic2 ай бұрын
It does not affect the bike at all. That is the ambient temp sensor for the display.
@verothacamaro2 ай бұрын
One of the coolest aftermarket products I've seen. Perfect blend of form and function. Well done, Motodemic!
@motodemic2 ай бұрын
Thanks! 👊
@FreerideMTB2 ай бұрын
Is ok with the scrambler 1200 xc?
@motodemic2 ай бұрын
This is not compatible with that model. Please see our site for the Scrambler XC/XE specific upgrade - bit.ly/scrm1200
@MtnPeakEnduro2 ай бұрын
Double headlights can get you killed as cars think you are another car far away at night.
@Ifeelgreyt17382 ай бұрын
Whats gonna happen to the ram intake?
@motodemic2 ай бұрын
The opening in the the frame still gets direct airflow.
@slashgilmour003 ай бұрын
Can the RS 2023 use it? Thanks
@motodemic3 ай бұрын
No, sorry.
@slashgilmour003 ай бұрын
thank you
@hgm83373 ай бұрын
I swapped out my H4. bulb for a yellow one, same voltage. LED headlights are shown to dazzle oncoming traffic, so they are not an upgrade imho
@motodemic3 ай бұрын
The dazzling you are referring to is when you add an LED bulb to the stock reflector. These are projector based systems so the lighting is going through an optic with much more control. That allows a much wider beam pattern that goes much further down the road. It is absolutely an upgrade.
@tomek007333 ай бұрын
Pokaz jak swieci w ciemnosci
@VendettaFXR3 ай бұрын
I wish I would've found out about this instructions video prior to installing this. I figured, how hard can it be? Didn't see the 2 screws you included until after I was done, managed to strip a phillips bolt, and what took you 5 mins, took me an hour. Mostly because of that darn bolt. But end result was fortunately the same. 😂
@MrPlod9994 ай бұрын
Is there a uk stockist
@motodemic4 ай бұрын
Sorry, we do not have any stocking dealers in the UK.
@jakobkristensen23904 ай бұрын
That is not a screwdriver; That is a man's left nipple
@viniciusrickert83554 ай бұрын
What about tue ram air, isolated?
@motodemic4 ай бұрын
The opening in the frame still gets direct airflow. Check out the many responses to this in the comments for more info.
@cloud98475 ай бұрын
I just installed mine on my 22' street twin. Absolutely love it. DEFINITELY pricey but seems to be well built and FAR brighter than stock
@FuriousGerbil55 ай бұрын
I got this setup on my 2018 and all I can say is I always have old heads asking what kinda bike that is and then see it’s a triumph and they just love the headlight look. Makes the bike looks like a cafe demon
@NB-ir1me5 ай бұрын
Why do they need to be 1 3/4" from the bottom triple clamp? I've done this conversion on my 2014 speed triple and have the motodemic fly screen as well, the wind is just barely too low, and goes directly up my helmet. If I just so slightly tilt my head down it completely stops the buffeting at 70mph. My thought is if I raise the light another .5 inches (give or take) it would make a night and day difference on highway comfort. I have the classic flyscreen btw
@motodemic5 ай бұрын
There are several factors to consider when dealing with wind, especially on a naked bike. Have you tested the wind with and without the screen or with the screen at different angles? It is definitely not a one setting/size fits all situation. To answer your question as to why the kit is located on the forks where it is - It has to do with the location of where the fork rings make contact with the fork tubes. The non-R model has long tapered sections on the tork tube, that is why we use shims. Our suggested installation height was to get the camps in the correct location on the taper for the diameter of the fork ring. You can move the brackets up as far as you can as long as the fork rings are still are still clamping. If you run out of clamping, then you would need thicker shims.
@Am0Am05 ай бұрын
Could you pur the cluster back on again after the install? Is it possible?
@matejslavik31836 ай бұрын
Where can I buy the adapter? I have the light.
@itskearny6 ай бұрын
Are there any of these left to order :(
@miatamadness95356 ай бұрын
How does this affect the bikes performance now that it's little intake is removed?
@motodemic4 ай бұрын
It is not affected at all. Check out the many responses to this in the comments for more info.
@davidmartin-pi6me6 ай бұрын
Hello, is it possible to mount the sentence of the Street triple 660 2020 on the street triple 660 of 2017, I thank you in advance for your response.
@motodemic6 ай бұрын
For the most part, those two models are the same. Only the headlight connection is different.
@qontrast10067 ай бұрын
This makes it look so much better shut up and take my money 😅
@motodemic7 ай бұрын
Do it 😎
@afiqafiat76617 ай бұрын
Ever try with ducati scrambler 1100? Any of this fit with it?
@motodemic7 ай бұрын
Sorry, it will not work on an 1100. Forks are a different size.
@afiqafiat76617 ай бұрын
@@motodemic how about the headlight socket? Can it fit 1100? headlight fork clamps i can get it from other brand..
@motodemic7 ай бұрын
@@afiqafiat7661 THIS conversion won't work, but we have Custom Headlight Brackets and all components are available separately. Please follow the link in the description and contact us so we can get you sorted.
@alessandrogiordano74998 ай бұрын
Hi. i noticed you did not connect the front position bolt. Isn't it necessary?
@motodemic8 ай бұрын
The front position is not reused because it is not needed in most cases. See at 1:12, where it is disconnected and then tucked away. If you absolutely need front position functionality, you could wire in the positive lead from the sub-harness going to the stock light to the red wire.
@alessandrogiordano74997 ай бұрын
@@motodemic I mounted a generic led one and the unique issue that I'm having is related to the handbar switches. The one I used for flashing the high light now turns on the high light while the one I used for turning on the high light turns off the headlight 😅
@dwaynthomassen42078 ай бұрын
Where can i buy the the headlight? Cancit be installed on street triple 675 from 2009?
@motodemic8 ай бұрын
Follow the link in the description. We do offer this conversion for the first gen 675.
@dwaynthomassen42078 ай бұрын
Do you gave a website where i can buy this headlight? And gauge?
@motodemic8 ай бұрын
Follow the link in the description 👆
@Johnnyreengo8 ай бұрын
is this the one that moves the beam into the turn?
@motodemic8 ай бұрын
Yes! Follow the link in the description for details and photos of the adaptive functionality.
@XlawSpencer8 ай бұрын
Now it looks much better
@boyzstuff12348 ай бұрын
Pointless vid without a comparison between old and new.
@motodemic8 ай бұрын
This is an installation video, it assumes you already have the product. Output photos are on the product page that is linked in the description and you already know how poor your stock headlight is 🙃
@gianfrancobarilari63959 ай бұрын
Dove si può trovare il faro?
@motodemic9 ай бұрын
Follow the link in the description 👆
@tommasofumisetto553110 ай бұрын
How many inches is the headlight? Thank you
@iamsa433510 ай бұрын
I like the windshield
@INFINITUM_TV10 ай бұрын
is this alowed in the EU?
@motodemic10 ай бұрын
Yes 👍
@takmutu47310 ай бұрын
Hey! Does this kit work on a 2016 Street Triple 660?
@motodemic10 ай бұрын
As far as our conversion fitment goes, a 660 is the same as the 675 or 765 models they were sold next to. With that said, It all depends on which headlights your bike has. Do your lights match the 13-16 675 or the 16-19 765?
@Serginhoz90011 ай бұрын
Não curti esse farol prefiro o de fábrica com as sobrancelhas 😁
@krzysztof_tactix11 ай бұрын
Is the LED lamp you are installing approved? give me the link
@motodemic11 ай бұрын
Yes! Link is in the description 👆
@krzysztof_tactix11 ай бұрын
Is this lamp approved and roadworthy?
@motodemic11 ай бұрын
Yes 👍
@kampanatthalangkarn2277 Жыл бұрын
Can I use this headlight with Triumph T100 black without modify cable?
@motodemic11 ай бұрын
Yes 👍
@francescovecchini Жыл бұрын
With this conversion you can also put on the original windshield?
@motodemic11 ай бұрын
Not on this model, but we do offer a flyscreen accessory. Follow the link in the description 👆
@calebaustin1486 Жыл бұрын
Will I still be able to put on a wind screen?
@motodemic Жыл бұрын
Yup! We offer a Flyscreen for this conversion. Follow the link in the description 👍
@JS-to9vc Жыл бұрын
I want but not for $720
@VinCode17 Жыл бұрын
My 2023 SV650 looks amazing with the EVO S - this upgraded headlight really makes the front of the bike look awesome.
@JimmySnakes Жыл бұрын
Great video guys I know it's from a few years ago, but would this conversion work on the newest available Street Triple RS?