BMW X5 E70 OIL PAN GASKET DONE WITHOUT LIFT STEP BY STEP

[@MyRolandi]

a swipe of rtv would keep u away for years and years dont get me wrong u did an excellent job all the way thru ur a A+ mechanic ✌️

[@yardmanmotorworks1759]

thank you

[@Triggerman2505]

This job required no RTV at all. I have done a few of these on BMW's and never used it, no issues. Cheers.

[@startingtech3900]

great work yardman but this is why i paid my mechanic 1300$ to replace my oil pna gasket in my bmw 335i N54 i didnt want to do this and possibly die in my 1 car garage. he replaced all alumium bolts and did my all 3 oil pump bolts while i their and one was broken off! glad i paid to get it done this looks so risky but amazing completion!

[@JARMotors]

damn n54 oil pump bolts break? i had one and did a oil pan gasket in my home garage wasn’t that bad but i didn’t know about the oil pump bolts so didn’t check that.

[@sfeuropean4706]

Ok, so the car is 6000 lbs and you have it lifted with four Jack stands which is 1500 lbs each and then you have the Jack stand sitting on the plastic ramp with four points which is 375 lbs per point on the plastic ramp I don't think it was designed to hold that. It is very scary how that car did not fall and squash you. Great job on explaining things but you need to secure the car better in the future or you won't live to make another video.

[@yardmanmotorworks1759]

thank you

[@kennethstanton5407]

I tip my hat to you sir! I am looking at buying another E53 that has a leaking pan gasket. Seeing how miserable this job actually is will influence at least my bid, if not entirely 86-ing the whole plan to buy it lol. And I thought a clutch replacement on a Porsche 931 on a dirt floor was a nasty task. It was cake, compared to this. ;-)

[@ronaldlaurent2884]

Awesome job! Proof again that when you have the will there is always a away.

[@yardmanmotorworks1759]

Always!

[@jefferyk.spellerberg176]

The music accompaniment is brutal....

[@Triggerman2505]

I agree, but the video is still great, got to give the man credit.

[@henrygreen8088]

Having this ussue with my 2013 X5 e70. How much should I pay for this job? Thank you.

[@anaestereo810]

N52 it seems, correct? Awesome job and determination 👏

[@DigitalCircus777]

Sadly, tail end of video was hard to hear with music playing and you giving instructions. Either way, thanks for the video and instruction. 😃

[@y.d.8117]

hi can you provide the part numbes of the rings and seals that you used ,...............

[@Ayagutak1]

Can you do my e70 , how much would it cost

[@yardmanmotorworks1759]

[e-mail]

[@alfredoarteaga2628]

What a JOB!, thank you for sharing!

[@yardmanmotorworks1759]

Thanks for watching!

[@KittrellHouston]

Decent video

[@yardmanmotorworks1759]

thank you

[@Kc123hereiam]

How much does this cost normally for parts and labor

[@mjc1177]

about 1800-2000 USD. Not at the dealer but a private shop.

[@persiorak20D]

Off the crankshaft pulley? Either way great job. You can make a killing $$$ if you perfect this. This is easy a cost between $1500 to $2500

[@기술자-f8m]

great job. i have e70 x5 48i. it doesn't leak oil pan yet but it may do soon.

[@richardboyer1866]

Great Job,,, Thank you for sharing,,, you are a very patient man !!! Good you can do yourself,,, its an amazing expensive replacement if someone have it done at BMW dealer,,,just dont want to think about it ! have a great day !

[@Tony-jv5pr]

Bro, I watch your video to see how to remove the subframe and I'm still not 100 percent sure after seeing it. Need more details sir. Thanks

[@yardmanmotorworks1759]

what do you want to know specifically?

[@HunterFamily98]

Excellent instructions 🙏🏿 👌🏿 👍🏿

[@yardmanmotorworks1759]

Glad it was helpful!

[@mechanicdudevlog8788]

Bro, what you did to hold that engine up is sketchy as F$ck. Go to harbor freight and spend the $130 for an engine cradle. Good job otherwise.

[@yardmanmotorworks1759]

remember my video is not just for people in a country with harbor freight. DIY does not mean I should everything that is in a shop. thanks for the comments though.

[@cherides147]

Thank you for this video god bless.

[@yardmanmotorworks1759]

you are welcome

[@tomhale9863]

Did you have to remove ps pump what year is the X5

[@yardmanmotorworks1759]

no i did not remove power steering pump i did not remove rock and pinion either i just strap it to the side

[@yardmanmotorworks1759]

2009

[@jasongreene2645]

Bro i'm paying a local shop to do mine! I'm very mechanically incline but this is one job i'm not doing lol

[@yardmanmotorworks1759]

i did think about it a long time before i actually decided to do it

[@dappa311]

Laughing Out Loud I got the same SUV, I have to do my oil pan seal and I have been putting it off because I don't wanna go through all that trouble, its one hell of a job!

[@dappa311]

@@yardmanmotorworks1759 Good work though brudda , how long did the whole thing take from start to finish?

[@yardmanmotorworks1759]

@@dappa311 than you it is really a lot without proper shop

[@mubtasims]

@Jason Greene How much are you paying for it? I have to do mine on my 2012 BMW X3 xDrive28i

[@m3g670]

easy job 😜🙈🙈🙈🙈🙈 mine will need to be done in near future

[@Rockardo_]

also that rtv isnt going to help but just make a mess, the gaskets need to be installed by them selves

[@autoboiisupreme]

Great content ‼️

[@Kc123hereiam]

They are trying to tell me this takes 5.5 hours to change the oil gasket. Is that true? I want to get a lawn chair and sit there and watch them change it. I think I’m paying for the smoke breaks and lunch too

[@yardmanmotorworks1759]

it took me longer than that

[@jefferyk.spellerberg176]

@@yardmanmotorworks1759 How long did it take you to take apart, and how long to put back together? How much total was the parts?

[@Triggerman2505]

​@@jefferyk.spellerberg176 I have done this job twice now and to be honest I take the whole weekend to do it. Mine takes a little bit longer because I also do the rod bearings while I'm there. It's literally 1.5-2 hours from there. I have two of these lol.

[@robertbarrett3507]

Great job me General, I'm getting ready to do mines on my 335xi...bless up

[@jth1703]

Than you for your video is a big job!

[@yardmanmotorworks1759]

no problem my friend you are welcome

[@Rockardo_]

it scares me to see how some people work on their cars

[@ericharris642]

Crank going to be toast

[@yardmanmotorworks1759]

crank is ok still working ok