The tires are antique Simplex replicas made by Coker. The front hub is a Honda cb125, the rear is a Sach moped hub, and the rims are made by Worksman.
@rubentrevino84317 жыл бұрын
The camera work is purrfect, adding nostalgia to already nice bike.
@badhammermotorworks8104 жыл бұрын
Sir I am in love with this whole project! It's incredible what you have achieved on a budget and especially on minimum wage with little in the way of tools! Ingenuity and drive are what you had and you used them to awesome effect! Just beautiful!
@Christianlvm228 жыл бұрын
how is possible to have and a sooo awesome bike and soo crap camera!! NIce bike!
@varun0094 жыл бұрын
They're from the same time period. Gotta keep it consistent.
@bozzskaggs1125 жыл бұрын
Finally someone on KZbin rides his board track replica.
@facumilano3576 Жыл бұрын
excelente proyecto, actualmente estoy haciendo lo mismo pero con un 80cc , en algún momento pondré un estacionario en V , como lo que hiciste vos, te felicito desde argentina! saludos
@VEKSTco11 жыл бұрын
It uses a continually variable transmission, or CVT for short. I have not maxed it out but I have had it well above 60mph. There are ways to make it legal but it depends on your state. It's no different than any other custom build motorcycle.
@wildsmooth92017 жыл бұрын
That bike has balls unlike my 79cc.
@sporty0510 жыл бұрын
Wow, that is one sweet scooter man!
@oprocurado100010 жыл бұрын
2:44 Paul walker ..rrsrs
@VEKSTco12 жыл бұрын
The engine is a 630cc 23hp Briggs and Stratton v-twin
@vodkayla11 жыл бұрын
Where do you get the wheel/hub/tire ? Those parts seem subpar on most of the bikes I see. Yours look substantial.
@oprocurado100010 жыл бұрын
Hello friend that engine power for 2 people ... thank loevar and beautiful bike
@DT-471 Жыл бұрын
Damn, I want to know the breakdown of this.
@VEKSTco12 жыл бұрын
Nope, it's all rigid. At some point I might build a leaf spring suspension that bolts to the current fork but not any time soon. Good luck on your build.
@jazzj25612 жыл бұрын
Cool I like how your bike sounds, I built a modern version of a board tracker, but I must ask does you front fork provide any suspension
@nigelcarren3 жыл бұрын
Sweet! 🏆⚒️
@johnbravo75425 жыл бұрын
What was this video recorded with? the first generation camera phone?
@jamesthomas192510 жыл бұрын
That bike sounds amazing. What brand of transmission is that CVT?
@officialDavidRees8 жыл бұрын
Perfect!
@luugo867 жыл бұрын
Hey man, great build. I love it. I am actually going to start a similar type of build soon, I had two questions for you man, how did you mount the engine to the frame, and how did you get the power from the engine drive gear to the rear wheel? Thanks for any information man.
@Xdeathsrain5 жыл бұрын
www.pipeburn.com/home/2012/10/01/vekst-boardtracker.html Might be late to this but here is an article about this build I found online. Hope you found it useful if not sorry yo bring up an old comment.
@Lazydomsgarage12 жыл бұрын
bad ass bike dude but where did you get you motor i want to build something like this
@mosedc769 жыл бұрын
great job my friend, i love it!!! wich engine did you use to ?
@VEKSTco12 жыл бұрын
Thanks, and yes this is the new bike.
@ericwar84929 жыл бұрын
man, this is what I'd like to build!! can you please give us more info?
@patrichofmann21186 жыл бұрын
Sehr schöne Arbeit......!!!!
@leonardarola Жыл бұрын
Bike still exists?
@m.kasper76466 жыл бұрын
Its a strange feeling having your hands below the center of gravity huh? I love boardtrack bikes but they feel a tad bit dangerous to ride hahaha!
@Bushpilot00611 жыл бұрын
So is it single gear? Did you find it's max speed? And if I build one can I make it legal to ride on the road?
@medericdarval74875 жыл бұрын
Sweet ride bro!
@Mully51410 жыл бұрын
Great sound!
@novansyahbsux41397 жыл бұрын
i love this kind of bike !
@gonnapumpupthevolume10 жыл бұрын
Is that a custom made frame and tank or did you buy it, thanks
@VEKSTco10 жыл бұрын
The whole bike it custom made by myself.
@joedirt70917 жыл бұрын
How fast will this board track racer top out at?
@yakuza20139 жыл бұрын
can you tell me the place i can find some engine like that :)
@TheBullterrierist8 жыл бұрын
+kenji bushido vanguard 23 hp
@yakuza20138 жыл бұрын
thanks bro
@debonairecatalina65708 жыл бұрын
+TheBullterrierist i have a 61 western flyer that i'm motorizing, i am currently prepping the frame for an old 3hp briggs, but i found a cast iron 18 hp opposed Toro engine that strikes me now that i ran into your videos, i might use the 18 horse for my 53 columbia, what would be some recommendations considering spoke thickness and frame design?
@patrickwoodward65976 жыл бұрын
Владимир Скворцов HARBOR FREIGHT WILL SHIP YOU ONE PRETTY CHEAP. OR BRIGGS AND STRATTON FOR A ORIGINAL NOT CHINESE COPY.
@rumunperfomance7 жыл бұрын
Perfekt ! great job ! 🍺
@jazzj25612 жыл бұрын
Thanks
@agentry88011 жыл бұрын
Very Nice!
@lcasillas4196 жыл бұрын
Can I buy it? Very cool..!
@f8f8esufj2a17 жыл бұрын
what camera is this?
@VEKSTco7 жыл бұрын
It's a Japanese art camera called a Digital Harinezumi 2. I've never had so many people complement this camera, Its kinda surprising. I personally like it but most people don't.
@user-zerminzh4 жыл бұрын
Wow
@Casual_BackPacking7 жыл бұрын
very nice
@FWCaptain-kv6sm8 жыл бұрын
fuckin awesome!thats a motor
@lucianozang27739 жыл бұрын
very very beautifull bike the sound and the built very perfect all datails nice thanks
@daviduzi784111 жыл бұрын
Sweet...
@lolomemo73038 жыл бұрын
What type of engine ؟؟
@horrorspeedmotorco52595 жыл бұрын
Brigg & straton
@uncleboogie698 жыл бұрын
sick!!!!!
@juanpabloberger55526 ай бұрын
😂👌👌😺👍🏻😊
@Xdeathsrain5 жыл бұрын
Heres an article written about this build I found online. Might be useful to someone out there! www.pipeburn.com/home/2012/10/01/vekst-boardtracker.html
@patrickwoodward65976 жыл бұрын
Where can you actually ride or race it? Oh that's what I Thought. Nice useless Rich kids toy.
@VEKSTco6 жыл бұрын
Hi Patrick, Thanks for watching my video and leaving a comment. I'm always happy to hear feedback whether it be good or bad. As for this bike being a "useless rich kid toy" you are half right.....it is useless! The main purpose of this build was to learn how to fabricate a frame from scratch. I learned a lot from this build and that knowledge has served me well in the years since. As for being a "rich kid toy".... at the time of this build I made just slightly more than minimum wage. With a little hard work and determination it just goes to show that anything is possible I hope this bike can inspire others who have similar dreams to pursue them.
@m.kasper76466 жыл бұрын
Patrick there are plenty of places to "ride" & "race" So what you "thought" is WRONG! So id suggest to you is stop thinking smart ass. (Dumbass actually).
@chuckerhead144 Жыл бұрын
@@VEKSTco Well said Lurker! The fact that you took the time to reply to a USELESS commenter just shows how much class you have!