Boat Wash

[@The_Great_Lopaka]

Hi Dwayne. I somewhat of a new boat owner and I was wondering if you don’t worry about the condensation that builds of under the snap on cover? I noticed mine sweats pretty bad under there which makes me nervous about mold building up under there. I am just curious as to how you manage that part, or is it even a concern for you. Thanks for any advice you have on that in advance. I’ve even been nervous to spray the electronics panel. Any help would be greatly appreciated 👍🏼

[@DwayneSmithAV]

Thanks for reaching out. I try to allow for air flow even when the cover is on. I don't typical seal the back area of the cover and around the middle window. That helps moisture get out. I also remove the seat covers and put them on the floor when the boat is going to be in storage for a few weeks, this prevents the items in the seat storage areas from getting moldy. Twice a year I trailer the boat home and give it a nice detailing inside and out. I also put a fresh coat of wax on it then too. It's a lot of up keep, but the boat will last longer and be more enjoyable. With all the salt water getting everywhere, it's important to give everything a rinse off after each use. I do hit the electrics with a little fresh water spray as well, they do get wet with wave splashes and if they are boat rated it should be fine. One thing you could do is have a spray bottle with fresh water if you don't want to use a water hose around your electronics panel. I hope this helps. Enjoy the boat!

[@The_Great_Lopaka]

@@DwayneSmithAV Ok. I have actually been putting a fan on the floor of the bow trying to keep air moving. Next time I won’t snap the back on and see if that is any better. Thanks a ton!