Fjordling 17HT Om606 swap

[@arjanb8510]

Nice video content. Good filming, straight to the point! Love this OM606 setup!

[@kevinm.n.5158]

Thank you for letting me vicariously experience this, good lord that is beautiful and incredible.

[@exoc1]

Grattis till en av de häftigaste fjordlingarna jag sett! Kul med diesel. :)

[@LOOKOUT2012]

Well that was Super Entertaining!! Love it!! All the best from Orkney ✌🚀

[@frankiewilde1137]

Nice build thanks for sharing

[@charlyvss5440]

incredible build !! well done and such a dream of mine !

[@kristoffscuba5466]

Fun build. Interesting seeing how long it takes to build boost. I suppose it’s because in a boat it’s a bit like the engine being told to pull a loaded trailer up a hill in 3rd gear from 0 rpm. Not much to be done about it I guess, have to wait until the rpms build up. Not really a problem once you are up and running but a great demonstration why they don’t put diesels in ski boats. 😂. Never seen anyone shorten a lower unit like that. Good work 👍

[@stianjohn]

@@kristoffscuba5466 a better size turbo end the problem is gone :). There is a skiboat with that engine on KZbin also ;)

[@kas5965]

I would say maybe supercharger with compound turbo?

[@TTURBOVOLVO]

This problem would be eliminated if the screw could change angle.

[@jon1864]

nowt to do with that if the turbo was larger the lag would be less,, but boost doesnt mean HP it just assits in getting the RPMs up and in the marine world its about getting up on the plain,, I have worked on INCAT high speed pass catermarans with 5000 hp Ruston RK diesels,,, you have 4 of these in 2 engines rooms,, boost is low at 1.5 to 2.3 bar but it still propells 4000 odd ton of alluminium at 35 knots,,, Diesel is King !

[@MonkPetite]

That boat is almost hooking doing the circle back. 😂 Impressive fun this is.

[@stianjohn]

@@MonkPetite tried to push the throttle all the way once and almost did a loop :p

[@MonkPetite]

@@stianjohn lucky you ..be safe sir . Your creativity must be spared and shared👍🏻

[@markmcgrath9098]

Wow, sounds great. It sounds like the boost hit quite high in the rev range. Is that correct? It’s a really nice build. Enjoy your summer.

[@Ak-zz6eh]

I have had similiar engine to boat 20 years, easy to put and works great.

[@SatelliteYL]

Love that engine sound! Nice video

[@mikeanderson2730]

Well, as we say in scandinavia; nobody respect a coward. And this guy shure as hell did put the hammer down. So, norway has this insane boat, Finland has the ridiculous fjordsnipa with 800hp cummins, and we in Sweden has the R1 powered spark/kick (260+ km/h on ice). So..... What about Denmark..?

[@V8Power5300]

Denmark is mostly pussys to scared if they are breaking any law. There always a few exceptions, but very few in denmark

[@nukapetrussen4547]

Im currently building a v8 powered mopa 2

[@mikeanderson2730]

@@nukapetrussen4547 What can i say, i´m not surprised! 25yrs ago a friend of mine cut off the bottom on a 6m wooden snipa, and put it on the bottom from a scarab race boat, that had been in a fire. Driven from a propshaft with an twin turbo 11 lit volvo truck engine, it shure was fun to ride in. Did about 45 knots. Looking forward to your new video, go Norway!

[@reidarandre123]

Rått! Ha en super sommer videre.

[@nathanvary7482]

Wheelin it like a nascar!

[@Chevdriver]

sleeper build, nice👌

[@pauldean8638]

Nice sleeper ,

[@KAEKARN]

haha jävlar vad den går! Häftigt bygge!!

[@tobiaseriksson5076]

Häftigt bygge. Vad är det för dämpning du har till stolarna?

[@pete.b4197]

Very fast but sametime very killer!! One ups and done!

[@stianjohn]

@@pete.b4197 that's everytime you get in a car or a buss og just riding a bike. So what's the prob?

[@looduselaps]

beatyful work!!!!! fan from estonia

[@rafasgarally3975]

This guy looks like f1 driver Valteri Botas

[@stianjohn]

I am botas of the sea :p

[@christianlonnovik4689]

Grymt bygge! När du kortade ner växelhuset, hur gjorde du med drivaxeln? Fanns det tillräckligt med splines kvar för att bara korta ner den? Helt klart mycket coolare med vässad turbodiesel inombordare än att hänga på herrejösses utombordare. 👍🤘

[@stianjohn]

@@christianlonnovik4689 måtte kutte og sveise :)

[@femountain]

Samt så mycket lägre tyngdpunkt samt det där härliga drivet genom vågor som blir med inombordare.

[@femountain]

Den perfekta Fjordlingen!🤩🫡👏👏

[@exosdel]

Love it! Great work!

[@AshGTE]

Some drone footage would be amazing!

[@stianjohn]

at the end

[@AshGTE]

Cool! Thanks. Missed that. My bad!

[@AngryNorwegianFisherman]

håhå en kombinasjon jeg har håpet på og få så se lenge! håper du lager mer video :)

[@marktiltins8845]

Don't forget the ski pole and some zip wakes

[@TheUffeess]

Kungligt!👍

[@Hajsansvejsan]

You make your way🤠

[@Vimse1973]

Herre Gud for en fantastisk lyd. Går jo som et skudd :)

[@fholmberg3019]

Nice 👍😊 Compass seems to be little vobbly..

[@Superminaren]

Nice build! Sounds like you would like to change the prop pitch to a slightly lower one, alternatively gear down the motor a little bit so you hit the boost before planing even in unfair conditions!

[@stianjohn]

@@Superminaren nah :p I want speed

[@Superminaren]

@@stianjohn Understandable :P

[@FlatlanderGear]

Incredible idea

[@frankrichter915]

Tolles Video und Boot. Wie schnell warst du? Viele Grüße aus Deutschland von der Ostsee.

[@ZoneTelevision]

I wonder if the torque is too much for that outdrive ? If that's an alpha one it probably won't last long. How Fast ?

[@finlay230]

class, love it !!!!

[@espenbjrnbak3863]

Satan jeg blir glad når jeg ser slikt! Lo høyt i stua da den gønna avgårde i slutten😂

[@A1Autocareballinasloe]

Hi what out drive are u using and do you have gearbox in between or straight connection to outlive thanks

[@stianjohn]

@@A1Autocareballinasloe i show in the video

[@F222RST]

What drive and prop you running

[@tonydiesel3444]

I want to build om648 outboard with a foot from a Stern Drive Alpha One or whatever but I want to cut it and have the shaft on the back and have a synchronous belt to the crankshaft of the engine inside of a cover I see that you cut and shortened the foot so I guess the shaft could be also welded on the other side

[@AK-zo2fr]

🔥🔥🔥🔥🍄🥳👍🏾👍🏾

[@momo23021991]

Hi, I have a question. Why is the manifold cooled pre turbo? Dont you want as much energy going into the turbo?

[@stianjohn]

@@momo23021991 fiberglass burns really good. Keep the heat down

[@FreddanAkrm]

Wow!!

[@vladimirnikonorov6555]

Hi there, u have nice project 👊 i have also om606 need to put it work with alha gen1, how you get it work. IT need to cut off ignition for a while to get gear to neutral. How u solved it with

[@stianjohn]

@@vladimirnikonorov6555 don't have any shutoff. The engine hunts at low idle so I have no problem.

[@stevenclowes1379]

Might need a compound turbo for this one if you want take off boost .

[@MrNicklasson87]

Ahhh, en mkt praktisk båt 😂👍

[@stianjohn]

@@MrNicklasson87 turbåt dette :) sovet noen netter i den :)

[@moto_rad]

That must do great on fuel as well

[@josteincarlsen2905]

Mer takk😊😊😊😊 lyst til å bygge en gammel Draco akkurat slik som denne!! Men har ikje knowledge nok😂😂 hva slags motor?

[@crabapple1974]

Coolt projekt! Biltema har både bitumen-plattor och skumplattor med folie för ljudisolering. Är det modifierad pump? DieselpumpUK har massa kit och annat för förbättrad spoolup. 👍

[@jyrihamalainen2983]

Blacksmoke🎉

[@hansibull]

Utrolig heftig! Hvor i Agder kan dette være da?

[@rkan2]

Need some counter ballast at the front. Or a mass damper lol :D

[@dieselpower5303]

Hello what seats are you using??

[@TheLastCast.]

I dunno if its comon to use these engines in boats but thats cool as shit

[@Thefreakyfreek]

amazing

[@martincogdell9188]

Hi good vid can you tell me where you got your drivers seat from manythanks martin

[@stianjohn]

@@martincogdell9188 the seats a old original boat seats

[@marcbeebee6969]

Hell of a boat

[@Hukon]

Impressive! Especially that you also “easily” shortened the height of the drive 😮

[@stianjohn]

@@Hukon easy to do but a bitch to weld :p

[@Hukon]

@@stianjohn yes that is the part I ment to say, and it has to hold a big force!

[@wildrc6679]

This looks awesome, what outdrive did you use? Is it a mercruiser alpha one? Cheers

[@stianjohn]

@@wildrc6679 alpha one gen 2. Shortend 3"

[@MikeZ32TT]

Nice

[@aleksanderslyngstad593]

Er så tøft!

[@ttshopbizerte127]

can i ask for a remedial course

[@Raunche]

how many kts did you do? seems like a fun build!

[@mikesarten6212]

Epic 😮

[@sergeikozin6005]

What about engin coolant how did you do it.

[@hugocohdavid]

Snyggt, hur löste du kylning?

[@stianjohn]

@@hugocohdavid org drev pumpe og varmeveksler

[@RastaAlien]

@7:05 just gonna send it

[@jinglemyberries866]

faen som den går! 9:23 helt rått

[@SnolsenGaming12]

knop?

[@Choober65]

The bow needs to be trimmed down a few degrees, she'll handle a LOT better then.

[@stianjohn]

@@Choober65 nah these need to fly ;) search fjordling on tiktok and you se what I mean ;)

[@Drengen-Ifur]

Dette var meget! Er det i Tvedestrandsfjorden ?

[@Drengen-Ifur]

Bare glem det😅 er sikker nå, etter du kortet ned stammen 7cm🫡

[@esbjarke]

Fra Bergen: Løvefett!

[@Chr.U.Cas1622]

After all this great work, this boat is unsafe. It obviously needs to be stabilized (fins, keels, plates) and the front needs some weight.

[@stianjohn]

@@Chr.U.Cas1622 nah more speed

[@Chr.U.Cas1622]

@@stianjohn Okay, Sir. Simply add wings to the roof and make the z-drive much longer. Then you will definitely gain more speed! Additionally you will have no bumpy ride any longer! 😁 ;-) Adding a hydrofoil thingi to the hull/bottom might have the same effect and will be cheaper. Of course you can always put this fantastic Mercedes engine in a bigger boat. Best regards, luck and health in particular.

[@stianjohn]

@@Chr.U.Cas1622 need to change gearing now. So I can go for a propper propeller and get close to or over 80knots

[@ville5152]

MORE MORE MORE

[@MrRaggarRobban]

Hahahahahaha.... Bra skit..

[@SupraTompan]

Perfektion 👌

[@joeyvogel3807]

Dude that thing is so cool hear it screaming just the thing i need here in the netherlands, but i think its not allowed or i cant insure it (if i could the cops cant chase me probably) whats your top speed

[@stianjohn]

@@joeyvogel3807 120kmh for now. New gearing soon so il try to hit more. Goal is 150+ kmh :)

[@joeyvogel3807]

@@stianjohn sick

[@ВиИв-й8щ]

The hull of this boat is not designed for high speeds. You can see how he begins to dolphin - prowl to the sides at heights above 70-80.

[@alapaco3331]

hvor kjøpte du motor?

[@stianjohn]

@@alapaco3331 bygd selv

[@mads2326]

Sykt rått 🎉

[@StephanPluemer]

Nice! What was the Top Speed?

[@stianjohn]

@@StephanPluemer only 74mph for now. Found out I had the wrong gearing in the lower

[@StephanPluemer]

@@stianjohn Thank you for the Information, Nice Boat, the Speed looks fast!

[@rafasgarally3975]

What kind of motor

[@polarViking]

Mercedes 6 cylinder engine

[@kurtremislettmyr7108]

tøft

[@Sanux_]

First

[@humanitynow1565]

Is it 60 km ph or more ?

[@stianjohn]

@@humanitynow1565 doing about 120 at the most for now. Wrong gearing so going to get more

[@ealoken]

What's the top speed? 50 knot?

[@stianjohn]

@@ealoken had it at 65knots now. But it blows out. So I need to lift the engine and transom

[@F222RST]

What drive and pitch prop you using ?? Bravo one ? How many hp

[@User-wollswoycegawage]

One wrong twitch of that steering wheel and your Go high side

[@stianjohn]

@@User-wollswoycegawage and?. one wrong twitch in your car and you hit somthing

[@User-wollswoycegawage]

@@stianjohn but car's don't jump about as much as that boat I've also done my fair share of boating Would trim tabs help with stability?

[@stianjohn]

​@@User-wollswoycegawageneed to get right gearing and a smaller propeller. It's so big it tilts the small boat when flooring it. And I need to learn the boat and it's querks :p

[@User-wollswoycegawage]

@@stianjohn it definitely fly's I've got an old 1960 land rover I'm giving it another make over going from 3.5 V8 to 3.9 V8 that's also dangerous at speed No seat belts crap brakes No roof half the time I suppose you do have water to hit but think it would still be painful Good luck with it Made a lovely job 👍

[@swissenkaka]

Wow!